BODIPY Peptide Labeling by Late‐Stage C(sp3)−H Activation

Late‐stage BODIPY diversification of structurally complex amino acids and peptides was accomplished by racemization‐free palladium‐catalyzed C(sp³)?H activation. Transformative fluorescence modification proved viable by triazole‐assisted C(sp³)?H arylation in a chemo‐ and site‐selective fashion, providing modular access to novel BODIPY peptide sensors.     

Iron‐Catalyzed Intramolecular Aminations of C(sp3)−H Bonds in Alkylaryl Azides

The nucleophilic iron complex Bu₄N[Fe(CO)₃(NO)] (TBA[Fe]) catalyzes the direct intramolecular amination of unactivated C(sp³)−H bonds in alkylaryl azides, which results in the formation of substituted indoline and tetrahydroquinoline derivatives.     

Catalytic Aerobic Oxidation of C(sp3)−H Bonds

Oxidation reactions are a key technology to transform hydrocarbons from petroleum feedstock into chemicals of a higher oxidation state, allowing further chemical transformations. These bulk‐scale oxidation processes usually employ molecular oxygen as the terminal oxidant as at this scale it is typically the only economically viable oxidant. The produced commodity chemicals possess limited functionality and usually show a high degree of symmetry thereby avoiding selectivity issues. In sharp contrast, in the production of fine chemicals preference is still given to classical oxidants. Considering the strive for greener production processes, the use of O₂, the most abundant and greenest oxidant, is a logical choice. Given the rich functionality and complexity of fine chemicals, achieving regio/chemoselectivity is a major challenge. This review presents an overview of the most important catalytic systems recently described for aerobic oxidation, and the current insight in their reaction mechanism.     

Construction of C(sp2)−C(sp3) Bond between Quinoxalin‐2(1H)‐ones and N‐Hydroxyphthalimide Esters via Photocatalytic Decarboxylative Coupling

A novel visible‐light‐driven decarboxylative coupling of alkyl N‐hydroxyphthalimide esters (NHP esters) with quinoxalin‐2(1H)‐ones has been developed. This C(sp²)?C(sp³) bond‐forming transformation exhibits excellent substrate generality with respect to both the coupling partners. Of note, a series of 3‐primary alkyl‐substituted quinoxalin‐2(1H)‐ones that were difficult to synthesize by previous methods could be obtained in moderate to excellent yields. Additionally, the mild conditions, easy availability of substrates, wide functional group tolerance and operational simplicity make this protocol practical in the synthesis of 3‐alkylated quinoxalin‐2(1H)‐ones.     

Distal γ‐C(sp3)−H Olefination of Ketone Derivatives and Free Carboxylic Acids

Reported herein is the distal γ‐C(sp³)?H olefination of ketone derivatives and free carboxylic acids. Fine tuning of a previously reported imino‐acid directing group and using the ligand combination of a mono‐N‐protected amino acid (MPAA) and an electron‐deficient 2‐pyridone were critical for the γ‐C(sp³)?H olefination of ketone substrates. In addition, MPAAs enabled the γ‐C(sp³)?H olefination of free carboxylic acids to form diverse six‐membered lactones. Besides alkyl carboxylic acids, benzylic C(sp³)?H bonds also could be functionalized to form 3,4‐dihydroisocoumarin structures in a single step from 2‐methyl benzoic acid derivatives. The utility of these protocols was demonstrated in large scale reactions and diversification of the γ‐C(sp³)?H olefinated products.     

Synthesis,Anticancer, and QSAR Studies of 2‐Alkyl(aryl,hetaryl)quinazolin‐4(3H)‐thione's and [1,2,4]Triazolo[1,5‐c]quinazoline‐2‐thione's Thioderivatives

Considering the frightening high level of mortality from cancer, studies of anticancer agents are vital nowadays. The 24 thioderivatives of 2‐alkyl(aryl)‐quinazolin‐4(3H)‐thiones and 20 thioderivatives of [1,2,4]triazolo[1,5‐c]quinazoline‐2‐thiones were synthesized and evaluated for preliminary in vitro anticancer activity with subsequent in silico QSAR analysis. The substance 18 had the best results inhibiting growth of eight cancer cell lines: CCRF‐CEM of leukemia; SF‐539, SNB‐75, and U251 of CNS cancer; 786, RXF393, and UO‐31 of renal cancer; and MDA‐MB‐231/ATCC of breast cancer (?31.50 – 47.41% of cell growth) with low procancer effect. Calculated QSAR‐models for CCRF‐CEM of leukemia, T‐47D and HS 578T of breast cancer, and mean cell growth demonstrated good rate of anticancer activity prediction (r² = 0.7 – 0.8,  = 0.5 – 0.7).     

TMSCl Promoted Direct sp3 C‐H Alkenylation to Construct (E)‐2‐Styryl‐tetrahydrobenzo[d]thiazoles

A high‐efficient and stereo‐specific approach for the preparation of biologically important (E)‐2‐styryl‐tetrahydrobenzo[d]thiazoles has been developed via TMSCl promoted direct sp³ C‐H alkenylation of 2‐methyl‐5,6‐dihydrobenzo[d]thiazol‐7(4H)‐one under metal‐free conditions. Seventeen target compounds were synthesized in excellent yields of 82% –98% under the optimal conditions of 300 mol% TMSCl at 110°C for 2 h, and their chemical structures were elucidated by IR, NMR, ESI‐MS, elemental analyses and X‐ray crystallography analysis. A plausible mechanism was also proposed, and this method provided a good functional group conversion for the sp³ C‐H substrates.     

Cp*CoIII‐Catalyzed C(sp3)−H Bond Amidation of 8‐Methylquinoline

An efficient and external oxidant‐free, Cp*Co^III‐catalyzed C(sp³)?H bond amidation of 8‐methylquinoline, using oxazolone as an efficient amidating agent, is reported for the first time under mild conditions. The reaction is selective and tolerates a variety of functional groups. Based on previous reports and experimental results, the deprotonation pathway proceeds through an external base‐assisted concerted metalation and deprotonation process.     

Palladium‐Catalysed C(sp3)−H Glycosylation for the Synthesis of C‐Alkyl Glycoamino Acids

We have developed a highly efficient and practical approach for palladium‐catalyzed trifluoroacetate‐promoted N‐quinolylcarboxamide‐directed glycosylation of inert β‐C(sp³)?H bonds of N‐phthaloyl α‐amino acids with glycals under mild conditions. For the first time, C(sp³)?H activation for glycosylation was achieved to build C‐alkyl glycosides. This method facilitates the synthesis of various β‐substituted C‐alkyl glycoamino acids and offers a tool for glycopeptide synthesis.     

Synthesis of 6-oxacyclopropa[a]indene derivatives starting from Baylis–Hillman adducts via Pd-mediated C(sp)–H activation

We prepared novel 1-phenyl-1,6a-dihydro-6-oxacyclopropa[a]indene-1a-carboxylic acid derivatives starting from the Baylis–Hillman adducts via the palladium-mediated domino carbopalladation involving activation of C(sp³)–H bond.     

Ferrocenyl Ionic Compounds Containing [Fe(CN)6]3– Anions: Synthesis,Characterization, and Catalytic Effects during Combustion

Twenty‐eight novel ferrocenyl ionic compounds, composed of mononuclear 1‐ferrocenylmethylalkyldimethylammoniums, 1‐ferrocenylmethyl‐3‐alkylimidazoliums, or their dinuclear analogs and [Fe(CN)₆]^3– anion, were designed and synthesized to tackle significant volatility and migration tendency of ferrocene‐based burning rate catalysts (BRCs) used currently in the composite solid propellants. The new compounds were characterized by UV/Vis, FT‐IR, and elementary analysis. The crystal structures of compounds 2· 5H₂O and 3· CH₂Cl₂ · 4H₂O verified the successful preparation of the desired ionic compounds. The TG tests at 70 °C for 24 h revealed that the new compounds exhibit lower volatility than catocene. The cyclic‐voltammetry results suggested that new compounds are quasi‐reversible or irreversible redox systems. TheTG/DSC analyses exhibited that the compounds are of highly thermal stability. Their catalytic effects on the thermal degradation of ammonium perchlorate (AP), 1,3,5‐trinitro‐1,3,5‐triazacyclohexane (RDX), and 1,3,5,7‐tetranitro‐1,3,5,7‐tetrazacyclooctane (HMX) were investigated. The results showed that most of the compounds exert great effects on the thermal degradation of AP and RDX during combustion. 11 and 2 are comparable to catocene in the thermal decomposition of AP and RDX, respectively, and can therefore be used as alternatives of catocene in a composite solid propellant. Some new compounds are unexpectedly active in promoting the thermal disintegration of HMX.     

Iridium(III)‐Catalyzed Regioselective Intermolecular Unactivated Secondary Csp3−H Bond Amidation

For the first time, a highly regioselective intermolecular sulfonylamidation unactivated secondary Csp³?H bond has been achieved using Ir^III catalysts. The introduced N,N’‐bichelating ligand plays a crucial role in enabling iridium–nitrene insertion into a secondary Csp³?H bond via an outer‐sphere pathway. Mechanistic studies and density functional theory (DFT) calculations demonstrated that a two‐electron concerted nitrene insertion was involved in this Csp³?H amidation process. This method tolerates a broad range of linear and branched‐chain N‐alkylamides, and provides efficient access to diverse γ‐sulfonamido‐substituted aliphatic amines.     

Nickel,Cobalt and Palladium Catalysed C−H Functionalization of Un‐Activated C(sp3)−H Bond

This review represents nickel, cobalt and palladium catalyzed C?H activation of sp³ carbon, with special emphasis on methyl C?H activation. The importance of directing group assistance and effect of ligand on β‐ or γ‐ C(sp³)?H activation is summarized in this review. The mechanistic study for Ni, Co and Pd catalyzed sp³ C?H bond functionalization also discussed in detail.     

MnI/AgI Relay Catalysis: Traceless Diazo‐Assisted C(sp2)–H/C(sp3)–H Coupling to β‐(Hetero)Aryl/Alkenyl Ketones

An unprecedented Mn^I/Ag^I‐relay‐catalyzed C(sp²)?H/C(sp³)?H coupling of (vinyl)arenes with α‐diazoketones is reported, wherein the diazo group was exploited as a traceless auxiliary for control of regioselectivity. Challenging β‐(hetero)aryl/alkenyl ketones were obtained through this operationally simple approach. The cascade process merges denitrogenation, carbene rearrangement, C?H activation, and hydroarylation/hydroalkenylation. The robustness of this method was demonstrated at preparative scale and applied to late‐stage diversification of natural products.     

Synthesis of Extended π‐Systems through C–H Activation

Activation of aromatic C? H bonds by a transition metal catalyst has received significant attention in the synthetic chemistry community. In recent years, rapid and site‐selective extension of π‐electron systems by C–H activation has emerged as an ideal methodology for preparing organic materials with extended π‐systems. This Review focuses on recently reported π‐extending C–H activation reactions directed toward new optoelectronic conjugated materials.     

PdII‐Catalyzed Intermolecular Amination of Unactivated C(sp3)H Bonds

Pd^II‐catalyzed intermolecular amination of unactivated C(sp³)?H bonds has been successfully developed for the first time. This method provides a new way to achieve the challenging intermolecular amination of unactivated C(sp³)?H bonds, producing a variety of unnatural β²‐amino carboxylic acid analogues. This C(sp³)?H amination protocol is demonstrated with a broad substrate scope, good functional‐group tolerance, and chemoselectivity. It is operated without use of phosphine ligand or external oxidant.     

Alkenylation of C(sp3)−H Bonds by Zincation/Copper‐Catalyzed Cross‐Coupling with Iodonium Salts

α‐Vinylation of phosphonates, phosphine oxides, sulfones, sulfonamides, and sulfoxides has been achieved by selective C?H zincation and copper‐catalyzed C(sp³)?C(sp²) cross‐coupling reaction using vinylphenyliodonium salts. The vinylation transformation proceeds in high efficiency and stereospecificity under mild reaction conditions. This zincative cross‐coupling reaction represents a general alkenylation strategy, which is also applicable for α‐alkenylation of esters, amides, and nitriles in the synthesis of β,γ‐unsaturated carbonyl compounds.     

Selective C(sp3)−H Aerobic Oxidation Enabled by Decatungstate Photocatalysis in Flow

A mild and selective C(sp³)?H aerobic oxidation enabled by decatungstate photocatalysis has been developed. The reaction can be significantly improved in a microflow reactor enabling the safe use of oxygen and enhanced irradiation of the reaction mixture. Our method allows for the oxidation of both activated and unactivated C?H bonds (30 examples). The ability to selectively oxidize natural scaffolds, such as (?)‐ambroxide, pregnenolone acetate, (+)‐sclareolide, and artemisinin, exemplifies the utility of this new method.     

Cu(I)‐Catalyzed Asymmetric Cross‐Coupling of N‐Tosylhydrazones and Trialkylsilylethynes: Enantioselective Construction of C(sp)—C(sp3) Bonds

The first catalytic enantioselective C(sp)―C(sp³) cross‐coupling reaction between N‐tosylhydrazones and trialkylsilylethynes in the presence of Cu(I) salts and chiral phosphoramidite ligands was developed. A series of synthetically interesting, functionalized alkynes were obtained with moderate to good enantioselectivities (up to 83% ee). Cu(II) carbene migratory insertion is proposed to be the enantio‐determining step.