Non‐surfactant template‐directed synthesis of SiO2‐polyimide hybrid self‐standing films with ordered mesoporous structure

The silica‐PI hybrid self‐standing films with ordered mesoporous structure have been prepared by using dibenzoyl‐L ‐tartaric acid (L ‐DBTA) as non‐surfactant template under mild sol–gel route. Polyimide matrix was obtained from polyamic acid (PAA) via thermal imidization process and the template was removed in this process. The PI‐based hybrid film with 20 wt% SiO₂ obtained from DBTA presented the ordered mesoporous channels with average pore size of about 2.0 nm and BET surface area of 1167 m²/g. FTIR and SEM studies indicated that the hydrogen bond interaction between the carboxylic groups of DBTA and benzamide bonds of PAA made the PAA possibly participate in the assembly process of the aggregates of the non‐surfactant template molecules. The mechanical, thermal and some physical properties of these hybrid films materials were also characterized. Copyright © 2010 John Wiley & Sons, Ltd.     

Nanoporous silica films containing aluminum and titanium

By utilizing surfactant aggregates as supramolecular templates, mesoporous and mesostructured silicas with highly ordered structures became available. The resulting mesoporous silicas are promising candidates to host various photo- and electro-active species along with catalytically active species, due to their large and controllable pore sizes, highly ordered pore arrangements with low dimensional geometries, and reactive surfaces. We have developed the rapid solvent evaporation method, which is a modified sol-gel process, for synthesizing the mesostructured silica-surfactant films as well as the mesoporous silica films. Supported thin films, self-standing films and bubbles of mesoporous silicas have been synthesized by the rapid solvent evaporation method. The microstructures of the films have also been successfully controlled by changing the synthetic conditions. Taking advantage of the ease of synthetic operation and the transparency and homogeneity of the resulting materials, we have been interested in the introduction of functional units into the mesostructured materials. This paper reports the synthesis of transparent films of titanium- and aluminum-containing nanoporous silicas to modify the surface properties (such as adsorptive and catalytic) of nanoporous silicas. The incorporation of Al led to the formation of cation exchange or acidic sites on the mesopore surface, as revealed by the cationic dye adsorption experiments. The photocatalytic reactions of the Ti-containing nanoporous silica films were also examined.     

Kinetics of polycondensation reactions during self-assembly of mesostructured films studied by in situ infrared spectroscopy

In situ synchrotron FTIR experiments have been performed during evaporation-induced self-assembly (EISA) of mesoporous films and the role of silica polycondensation in obtaining highly organized mesostructures has been illuminated.     

Synthesis of N‐Doped Mesoporous Carbon Nanorods through Nano‐Confined Reaction: High‐Performance Catalyst Support for Hydrogenation of Phenol Derivatives

Traditional hard‐template methods for the preparation of mesoporous carbon structures have been well developed, but there are difficulties associated with complete filling of the organic precursors in ordered mesochannels and exact replication of the templates. Herein, mesoporous carbon nanorods (meso‐CNRs) were synthesized through thermal condensation of furfuryl alcohol followed by the nano‐confined decomposition of polyfurfuryl alcohol in silica nanotubes (SiO₂ NTs) with porous shells. Limited and slow release of gaseous water through the porous shells and finite polyfurfuryl precursor inside silica nanotubes are responsible for the formation of the mesoporous structures. Nitrogen can be doped into the meso‐CNRs by adding guanidine hydrochloride to the precursors. The nitrogen dopant not only stabilizes the ultrasmall and active Pd nanocatalyst in the meso‐CNRs but also increases the electron density of Pd and accelerates the dissociation of H₂, both of which increase the catalytic activity of the Pd catalyst in hydrogenation reactions.     

X-rays to study,induce, and pattern structures in sol–gel materials

X-rays investigations have been shown to reveal important information regarding material features and the formation mechanism of mesostructured materials. Small angle X-ray scattering (SAXS) analysis performed using a synchrotron source has been very important in the optimization of the organization of mesoporous coatings obtained by evaporation induced self-assembly (EISA). The interaction between X-rays and ordered mesoporous films has only recently been reported, and new knowledge has been developed to use this external radiation source to tune the local material properties. Here we discuss the recent developments in X-ray lithography combined with sol–gel synthesis to pattern mesostructured and hierarchical porous coatings including the ability to tailor functionalized surfaces.     

Evaporation induced self-assembly of templated silica and organosilica thin films on various electrode surfaces

A new one-step method is reported for the deposition of hybrid mesoporous thin films on various electrode surfaces (gold, platinum, glassy carbon). Deposition was achieved by spin-coating sol–gel mixtures in the presence of a surfactant template to get mesostructured thin layers on the various conducting substrates. Film formation occurred by evaporation induced self-assembly (EISA) involving the hydrolysis and (co)condensation of silane and/or organosilane precursors on the electrode surface. Extraction of the surfactant from the ordered mesoporous films led to a large increase of mass transport rates into the materials and imparted high accessibility to the organic moieties in case of functionalized mesoporous overlayers. The electrochemical properties of the film-modified electrodes have been studied by cyclic voltammetry (CV), and also via the chemical accumulation of mercury ions prior to their stripping analysis by differential pulse voltammetry (i.e. for thiol-functionalized thin films). Some evidences to support the formation of self-assembled monolayers (SAMs) on electrodes, have been also discussed. The formation of well-adhering mesoporous thin films on solid electrode surfaces is expected to have a high impact on the development of new electrochemical sensors.     

Growth of Single‐Layered Two‐Dimensional Mesoporous Polymer/Carbon Films by Self‐Assembly of Monomicelles at the Interfaces of Various Substrates

Single‐layered two‐dimensional (2D) ultrathin mesoporous polymer/carbon films are grown by self‐assembly of monomicelles at the interfaces of various substrates, which is a general and common modification strategy. These unconventional 2D mesoporous films possess only a single layer of mesopores, while the size of the thin films can grow up to inch size in the plane. Free‐standing transparent mesoporous carbon ultrathin films, together with the ordered mesoporous structure on the substrates of different compositions (e.g. metal oxides, carbon) and morphologies (e.g. nanocubes, nanodiscs, flexible and patterned substrates) have been obtained. This strategy not only affords controllable hierarchical porous nanostructures, but also appends the easily modified and multifunctional properties of carbon to the primary substrate. By using this method, we have fabricated Fe₂O₃–mesoporous carbon photoelectrochemical biosensors, which show excellent sensitivity and selectivity for glutathione.     

Periodic Mesoporous Organosilica Materials: Self‐Assembly of Carbamothioic Acid‐Bridged Organosilane Precursors

A new series of carbamothioic acid‐containing periodic mesoporous organosilica (PMO) materials has been synthesized by a direct cocondensation method, in which an organosilica precursor N,S‐bis[3‐(triethoxysilyl)propyl]carbamothioic acid (MI) is treated with tetraethyl orthosilicate (TEOS), and the nonionic surfactant Pluronic 123 (P123) is used as a template under acidic conditions in the presence of inorganic additives. Moreover, the synthesis of the PMO material consisting of the MI precursor without TEOS has been realized. These novel PMO materials have large surface areas, well‐ordered mesoporous structures, hollow fiberlike morphologies, and thick walls. They are also structurally well‐ordered with a high organosilica precursor content, and the carbamothioic acid groups are thermally stable up to 250 °C. Furthermore, the organosilica materials exhibit hydrothermal stability in basic solution.     

Molecular Design of Bisphosphonates To Adjust Their Reactivity toward Metal Sources for the Surfactant‐Assisted Synthesis of Mesoporous Films

The precise control of primary reactions in solutions is one of the most significant steps for the nanoscale design of inorganic solids in multidisciplinary fields. However, further growth of the inorganic species to give bulkier species disturbs such designs. The surfactant‐assisted synthesis of mesoporous materials is a good strategy for addressing such concerns because pores formed by supramolecularly mediated processes are surrounded by nanometer‐sized continuous frameworks. Many experiments are generally conducted to optimize the reaction conditions for the synthesis of highly ordered mesostructures. Herein, to minimize such trial‐and‐error efforts, a new and practical concept is proposed for the precise design of porous materials. By adjusting the reactivity between bisphosphonates and metal sources through molecular design of the starting bisphosphonate compound, it was possible to synthesize mesoporous films with unique compositions by a surfactant‐assisted approach.     

Europium‐Doped Mesoporous Titania Thin Films: Rare‐Earth Locations and Emission Fluctuations under Illumination

Herein, Eu^III‐doped 3D mesoscopically ordered arrays of mesoporous and nanocrystalline titania are prepared and studied. The rare‐earth‐doped titania thin films—synthesized via evaporation‐induced self‐assembly (EISA)—are characterized by using environmental ellipsoporosimetry, electronic microscopy (i.e. high‐resolution scanning electron microscopy, HR‐SEM, and transmission electron microscopy, HR‐TEM), X‐ray diffraction, and luminescence spectroscopy. Structural characterizations show that high europium‐ion loadings can be incorporated into the titanium‐dioxide walls without destroying the mesoporous arrangement. The luminescence properties of Eu^III are investigated by using steady‐state and time‐resolved spectroscopy via excitation of the Eu^III ions through the titania host. Using Eu^III luminescence as a probe, the europium‐ion sites can be addressed with at least two different environments within the mesoporous framework, namely, a nanocrystalline environment and a glasslike one. Emission fluctuations (⁵D₀→⁷F₂) are observed upon continuous UV excitation in the host matrix. These fluctuations are attributed to charge trapping and appear to be strongly dependent on the amount of europium and the level of crystallinity.     

Designed synthesis of mesoporous solids via nonionic-surfactant-templating approach

The continual needs for improved performances in applications derived by diversified compositions and mesostructures have pushed forward the development of mesoporous solids. The nonionic-surfactant-templating approach has been a critical route in this advancement. A large number of nonionic surfactants widely used in industries and featured with low cost, low toxicity, bio-degradation and ordered microdomains can be utilized as effective templates to the design and synthesis of abundant mesoporous solids. This feature article provides recent reports on the use of nonionic surfactant self-assembly as examples to fabricate high-quality ordered mesoporous solids which illustrates advances in synthesis and understanding of formation mechanisms. It includes the selection of surfactants, a summary of the effects of synthetic parameters, the current understanding of the synthetic pathways and related mechanisms with some emphasis on evaporation induced self-assembly (EISA), as well as the design and synthesis on the microscale (atomic and molecular compositions) and mesoscale (mesostructures). Preliminary applications of mesoporous solids particularly in optical devices, electrodes and biomaterials are also presented.     

Manganese‐Doped Highly Ordered Mesoporous Silicate with High Efficiency for Oxidation Suppression

Herein, we demonstrate a facile approach to manganese‐doped highly ordered mesoporous silicate with oxidation‐suppression function. As biocompatible supports of guest ions, the ordered mesoporous silicate was synthesized by evaporation‐induced self‐assembly. The phase‐transition from disordered to lamellar structures in the highly ordered mesoporous structure of these porosity‐tuned materials was controlled by adjusting the concentration of a lab‐made polystyrene‐b‐polyethylene oxide copolymer. Manganese was successfully incorporated as a guest in the hexagonally packed mesoporous silicate by using an ultrasound‐assisted technique. The incorporation of manganese ions into the pores of a mesoporous silicate support could be induced for host–guest functional applications. Manganese‐doped mesoporous silicate structures have been examined for their use as antioxidizing agents by electron spin resonance (ESR) measurements and radical‐scavenging tests. The manganese atoms in the mesoporous structures could act in a free‐radical‐scavenging capacity, much like manganese nanoparticles. The high efficiency of their oxidation‐suppression function is extended for application to catalytic products.     

Tartardiamide‐Functionalized Chiral Organosilicas with Highly Ordered Mesoporous Structure

A novel chiral mesoporous organosilica with L ‐tartardiamide moieties integrated in the backbone has been synthesized for the first time by a mild synthetic approach with block copolymer P123 as a template. The materials have highly ordered 2D hexagonal mesostructure and uniform pore size in the range of 7.6 to 5.5 nm. NMR, IR, and TG analyses confirm that the tartardiamide group was successfully incorporated into the framework. The intrinsic chirality of L ‐tartardiamide endows the materials with unique optical activities and chiral‐recognition properties. By dissolving the materials into NaOH, the solutions show rotation of polarized light by +8.42° to +15.53°, depending on the amount of the chiral moieties in the materials. Owing to the chirality of L ‐tartardiamide, the materials exhibited chiral‐induction ability in the epoxidation of allyl alcohol, thus further demonstrating the chirality of the materials.     

Arsenic sorption and redox transformation on iron‐impregnated ordered mesoporous carbon

Ordered mesoporous carbon has been actively investigated for its potential applications as catalyst supports, electrochemical materials and gas separation media. In this study, we tested an iron‐modified ordered mesoporous carbon (FeOMC) for its ability to adsorb arsenic from the aqueous phase. The FeOMC synthesis involved the preparation of an ordered silica template SBA‐15, in situ polymerization of acrylic acid in the template, carbonization and template removal to obtain the ordered mesoporous carbon, and iron impregnation. Batch experiments showed that the pH level of the solution had a major impact on arsenic sorption. Further, we found that the presence of anions (i.e. PO₄^3? and SiO₃^2?) could significantly decrease the sorption of both arsenate and arsenite. Arsenite oxidation to arsenate was observed in alkaline solutions, with or without anions being present. The oxidation of arsenite was attributed to both direct and catalytic reactions with the surface functional groups on the ordered mesoporous carbon. Adsorption of arsenic on FeOMC could be well explained by the surface complexation model. Copyright © 2007 John Wiley & Sons, Ltd.     

Breakthrough and future: nanoscale controls of compositions,morphologies, and mesochannel orientations toward advanced mesoporous materials

Currently, ordered mesoporous materials prepared through the self‐assembly of surfactants have attracted growing interests owing to their special properties, including uniform mesopores and a high specific surface area. Here we focus on fine controls of compositions, morphologies, mesochannel orientations which are important factors for design of mesoporous materials with new functionalities. This Review describes our recent progress toward advanced mesoporous materials. Mesoporous materials now include a variety of inorganic‐based materials, for example, transition‐metal oxides, carbons, inorganic‐organic hybrid materials, polymers, and even metals. Mesoporous metals with metallic frameworks can be produced by using surfactant‐based synthesis with electrochemical methods. Owing to their metallic frameworks, mesoporous metals with high electroconductivity and high surface areas hold promise for a wide range of potential applications, such as electronic devices, magnetic recording media, and metal catalysts. Fabrication of mesoporous materials with controllable morphologies is also one of the main subjects in this rapidly developing research field. Mesoporous materials in the form of films, spheres, fibers, and tubes have been obtained by various synthetic processes such as evaporation‐mediated direct templating (EDIT), spray‐dried techniques, and collaboration with hard‐templates such as porous anodic alumina and polymer membranes. Furthermore, we have developed several approaches for orientation controls of 1D mesochannels. The macroscopic‐scale controls of mesochannels are important for innovative applications such as molecular‐scale devices and electrodes with enhanced diffusions of guest species. © 2010 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 321–339; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.200900022     

Soft‐Templating Synthesis of N‐Doped Mesoporous Carbon Nanospheres for Enhanced Oxygen Reduction Reaction

The development of ordered mesoporous carbon materials with controllable structures and improved physicochemical properties by doping heteroatoms such as nitrogen into the carbon framework has attracted a lot of attention, especially in relation to energy storage and conversion. Herein, a series of nitrogen‐doped mesoporous carbon spheres (NMCs) was synthesized via a facile dual soft‐templating procedure by tuning the nitrogen content and carbonization temperature. Various physical and (electro)chemical properties of the NMCs have been comprehensively investigated to pave the way for a feasible design of nitrogen‐containing porous carbon materials. The optimized sample showed a favorable electrocatalytic activity as evidenced by a high kinetic current and positive onset potential for oxygen reduction reaction (ORR) due to its large surface area, high pore volume, good conductivity, and high nitrogen content, which make it a highly efficient ORR metal‐free catalyst in alkaline solutions.     

Self‐Assembling of Er2O3–TiO2 Mixed Oxide Nanoplatelets by a Template‐Free Solvothermal Route

An easy solvothermal route has been developed to synthesize the first mesoporous Er₂O₃–TiO₂ mixed oxide spherical particles composed of crystalline nanoplatelets, with high surface area and narrow pore size distribution. This synthetic strategy allows the preparation of materials at low temperature with interesting textural properties without the use of surfactants, as well as the control of particle size and shape. TEM and Raman analysis confirm the formation of nanocrystalline Er₂O₃–TiO₂ mixed oxide. Mesoscopic ordered porosity is reached through the thermal decomposition of organic moieties during the synthetic process, thus leading to a template‐free methodology that can be extended to other nanostructured materials. High specific surface areas (up to 313 m² g^?1) and narrow pore size distributions are achieved in comparison to the micrometric material synthesized by the traditional sol–gel route. This study opens new perspectives in the development, by solvothermal methodologies, of multifunctional materials for advanced applications by improving the classical pyrochlore properties (magnetization, heat capacity, catalysis, conductivity, etc.). In particular, since catalytic reactions take place on the surface of catalysts, the high surface area of these materials makes them promising candidates for catalysts. Furthermore, their spherical morphology makes them appropriate for advanced technologies in, for instance, ceramic inkjet printers.     

A Review of Recent Developments of Mesoporous Materials

This personal account concerns novel recent discoveries in the area of mesoporous materials. Most of the papers discussed have been published within the last two to three years. A major emphasis of most of these papers is the synthesis of unique mesoporous materials by a variety of synthetic methods. Many of these articles focus on the control of the pore sizes and shapes of mesoporous materials. Synthetic methods of various types have been used for such control of porosity including soft templating, hard templating, nano‐casting, electrochemical methods, surface functionalization, and trapping of species in pores. The types of mesoporous materials range from carbon materials, metal oxides, metal sulfides, metal nitrides, carbonitriles, metal organic frameworks (MOFs), and composite materials. The vast majority of recent publications have centered around biological applications with a majority dealing with drug delivery systems. Several other bio‐based articles on mesoporous systems concern biomass conversion and biofuels, magnetic resonance imaging (MRI) studies, ultrasound therapy, enzyme immobilization, antigen targeting, biodegradation of inorganic materials, applications for improved digestion, and antitumor activity. Numerous nonbiological applications of mesoporous materials have been pursued recently. Some specific examples are photocatalysis, photo‐electrocatalysis, lithium ion batteries, heterogeneous catalysis, extraction of metals, extraction of lanthanide and actinide species, chiral separations and catalysis, capturing and the mode of binding of carbon dioxide (CO₂), optical devices, and magneto‐optical devices. Of this latter class of applications, heterogeneous catalysis is predominant. Some of the types of catalytic reactions being pursued include hydrogen generation, selective oxidations, aminolysis, Suzuki coupling and other coupling reactions, oxygen reduction reactions (ORR), oxygen evolution reactions (OER), and bifunctional catalysis. For perspective, there have been over 40,000 articles on mesoporous materials published in the last 4 years and about 1388 reviews. By no means is this personal account thorough or all inclusive. One objective has been to choose a variety of articles of different types to obtain a flavor of the breadth of diversity involved in the area of mesoporous materials.     

Highly Ordered Mesoporous Few‐Layer Graphene Frameworks Enabled by Fe3O4 Nanocrystal Superlattices

While great progress has been achieved in the synthesis of ordered mesoporous carbons in the past decade, it still remains a challenge to prepare highly graphitic frameworks with ordered mesoporosity and high surface area. Reported herein is a simple synthetic methodology, based on the conversion of self‐assembled superlattices of Fe₃O₄ nanocrystals, to fabricate highly ordered mesoporous graphene frameworks (MGFs) with ultrathin pore walls consisting of three to six stacking graphene layers. The MGFs possess face‐centered‐cubic symmetry with interconnected mesoporosity, tunable pore width, and high surface area. Because of their unique architectures and superior structural durability, the MGFs exhibit excellent cycling stability and rate performance when used as anode materials for lithium‐ion batteries, thus retaining a specific capacity of 520 mAh g^?1 at a current density of 300 mA g^?1 after 400 cycles.     

Layer‐by‐Layer Motif Architectures: Programmed Electrochemical Syntheses of Multilayer Mesoporous Metallic Films with Uniformly Sized Pores

Although multilayer films have been extensively reported, most compositions have been limited to non‐catalytically active materials (e.g. polymers, proteins, lipids, or nucleic acids). Herein, we report the preparation of binder‐free multilayer metallic mesoporous films with sufficient accessibility for high electrocatalytic activity by using a programmed electrochemical strategy. By precisely tuning the deposition potential and duration, multilayer mesoporous architectures consisting of alternating mesoporous Pd layers and mesoporous PdPt layers with controlled layer thicknesses can be synthesized within a single electrolyte, containing polymeric micelles as soft templates. This novel architecture, combining the advantages of bimetallic alloys, multilayer architectures, and mesoporous structures, exhibits high electrocatalytic activity for both the methanol oxidation reaction (MOR) and the ethanol oxidation reaction (EOR).