A large variety of synthetic methods have been developed for the synthesis of functionalized aliphatic amines because of their broad spectrum of application. Metallic reagents/catalysts and/or toxic oxidants are involved in most of the cases. Direct C? H functionalization of aliphatic amines via their classical condensation reactions with suitable carbonyl compounds is advantageous because this method avoids hazardous metallic reagents, toxic oxidants and pre‐activation/pre‐functionalization step(s). In this account, the concept of direct C? H functionalization of aliphatic amines based on the classical condensation–isomerization–addition (CIA) strategy followed by recent contributions from our ongoing research in the field along with relevant examples from other groups are described. Successes in stereo‐ and regioselective C? C and C? O bond formation via direct α‐ as well as β‐C(sp3)–H functionalization are discussed.
Poly‐(N‐isopropylacrylamide) (PNIPA) hydrogel films doped with uniaxially aligned liquid crystalline (LC) nanosheets adsorbed with a dye are synthesized and its anomalous photothermal deformation is demonstrated. The alignment of the nanosheet LC at the cm‐scale is easily achieved by the application of an in‐plane or out‐of‐plane AC electric field during photo‐polymerization. A photoresponsive pattern is printable onto the gel with μm‐scale resolution by adsorption of the dye through a pattern‐holed silicone rubber. When the gel is irradiated with light, only the colored part is photothermally deformed. Interestingly, the photo‐irradiated gel shows temporal expansion along one direction followed by anisotropic shrinkage, which is an anomalous behavior for a conventional PNIPA gel.
Multisubstituted olefins are fundamental motifs in organic compounds. In this account, we describe the synthesis of organic molecules bearing an olefinic moiety by the transition‐metal‐catalyzed regio‐ and stereoselective addition of a variety of interelement compounds to alkynes. Regio‐ and stereoselective silaboration, diborylation, and chlorothiolation have been achieved by using the transition‐metal catalysts. The subsequent cross‐coupling reactions of the boron‐containing alkenes to install various aryl groups afforded the corresponding tri‐ and tetraarylated olefins. This account describes our research on the highly regio‐ and stereoselective synthesis of multifunctionalized olefins such as tetraarylethenes with four different aryl groups.
2‐Deoxystreptamine (2DOS) is the unique chemically stable aminocyclitol scaffold of clinically important aminoglycoside antibiotics such as neomycin, kanamycin, and gentamicin, which are produced by Actinomycetes. The 2DOS core can be decorated with various deoxyaminosugars to make structurally diverse pseudo‐oligosaccharides. After the discovery of biosynthetic gene clusters for 2DOS‐containing aminoglycoside antibiotics, the function of each biosynthetic enzyme has been extensively elucidated. The common biosynthetic intermediates 2DOS, paromamine and ribostamycin are constructed by conserved enzymes encoded in the gene clusters. The biosynthetic intermediates are then converted to characteristic architectures by unique enzymes encoded in each biosynthetic gene cluster. In this Personal Account, we summarize both common biosynthetic pathways and the pathways used for structural diversification.
Coordination polymers serving as molecular magnetic refrigerants have been attracting great interest. In particular, coordination cluster compounds that demonstrate their apparent advantages on cryogenic magnetic refrigerants have attracted more attention in the last five years. Herein, we mainly focus on depicting aspects of syntheses, structures, and magnetothermal properties of coordination clusters that serve as magnetic refrigerants on account of the magnetocaloric effect. The documented molecular magnetic refrigerants are classified into two primary categories according to the types of metal centers, namely, homo‐ and heterometallic clusters. Every section is further divided into several subgroups based on the metal nuclearity and their dimensionalities, including discrete molecular clusters and those with extended structures constructed from molecular clusters. The objective is to present a rough overview of recent progress in coordination‐cluster‐based molecular magnetic refrigerants and provide a tutorial for researchers who are interested in the field.
Push–pull molecules represent a unique and fascinating class of organic π‐conjugated materials. Herein, we provide a summary of their recent extraordinary design inspired by letters of the alphabet, especially focusing on H‐, L‐, T‐, V‐, X‐, and Y‐shaped molecules. Representative structures from each class were presented and their fundamental properties and prospective applications were discussed. In particular, emphasis is given to molecules recently prepared in our laboratory with T‐, X‐, and Y‐shaped arrangements based on indan‐1,3‐dione, benzene, pyridine, pyrazine, imidazole, and triphenylamine. These push–pull molecules turned out to be very efficient charge‐transfer chromophores with tunable properties suitable for second‐order nonlinear optics, two‐photon absorption, reversible pH‐induced and photochromic switching, photocatalysis, and intercalation.
Aggregation‐induced emission (AIE) luminogens show abnormal fluorescent behavior; they are non‐emissive in solution, but they become strongly emissive after aggregation. Sensing and imaging are the major applications of AIE luminogens. By properly manipulating the aggregation and deaggregation of AIE molecules, various bio‐/chemosensors have been developed. Moreover, AIE molecules with targeting groups have been devised for imaging of organelles and cancer cells. In this account, we report our recent work on the application of AIE luminogens for the construction of bio‐/chemosensors and imaging.
This review focuses on our work on metal‐free sensitizers for dye‐sensitized solar cells (DSSCs). Sensitizers based on D?A′?π?A architecture (D is a donor, A is an acceptor, A′ is an electron‐deficient entity) exhibit better light harvesting than D?π?A‐type sensitizers. However, appropriate molecular design is needed to avoid excessive aggregation of negative charge at the electron‐deficient entity upon photoexcitation. Rigidified aromatics, including aromatic segments comprising fused electron‐excessive and ‐deficient units in the spacer, allow effective electronic communication, and good photoinduced charge transfer leads to excellent cell performance. Sensitizers with two anchors/acceptors, D(–π–A)2, can more efficiently harvest light, inject electrons, and suppress dark current compared with congeners with a single anchor. Appropriate incorporation of heteroaromatic units in the spacer is beneficial to DSSC performance. High‐performance, aqueous‐based DSSCs can be achieved with a dual redox couple comprising imidazolium iodide and 2,2,6,6‐tetramethylpiperidin‐N‐oxyl, and/or using dyes of improved wettability through the incorporation of a triethylene oxide methyl ether chain.
Acenes, a type of polycyclic aromatic hydrocarbon containing linearly fused benzene rings, have received much attention from organic chemists, physical chemists, and materials scientists, due to their intriguing properties and potential applications in organic electronics. Without doubt, acene chemistry has been one of the hottest topics among the π‐conjugated systems. However, poor stability of acenes is the prominent issue that limits their applications. In this personal account, we summarize different strategies developed in our group to construct and stabilize acenes and acene analogues. In addition, the unique properties and applications of some molecules will be discussed.
A series of N‐sulfinyl dienophiles 1c‐i has been screened in asymmetric hetero‐Diels‐Alder reactions using chiral bis(oxazoline)copper(II) and ‐zinc(II) triflates. The survey pointed out N‐sulfine 1c (R ? P(?O)(OPh)2) as the most promising N‐sulfine regarding yield and stereoselectivity (up to 97% ee). The relative configurations, and in one case the absolute configuration, of the HDA adducts were established by X‐ray analysis. 相似文献
Ligand functionalization in metal–organic frameworks (MOFs) has been studied extensively and has been demonstrated to enhance gas adsorption and induce interesting gas adsorption phenomena. This account summarizes our recent study of three series of MOFs by ligand functionalization, as well as their carbon dioxide adsorption properties. While ligand functionalization does not change the overall structure of the frameworks, it can influence their gas adsorption behavior. In the first two series, we show how ligand functionalization influences the CO2 affinity and adsorption capacity of MOFs. We also show a special case in which subtle changes in ligand functionality alter the CO2 adsorption profile.
This article describes recent developments in C3‐symmetric tris‐urea low‐molecular‐weight gelators and their applications. The C3‐symmetric tris‐ureas are excellent frameworks to form supramolecular polymers through noncovalent interactions. In organic solvents, hydrophobic tris‐ureas form supramolecular gels. Amphiphilic tris‐ureas form supramolecular gels in aqueous media. Functional supramolecular gels were prepared by introducing appropriate functional groups into the outer sphere of tris‐ureas. Supramolecular hydrogels obtained from amphiphilic tris‐ureas were used in the electrophoresis of proteins. These electrophoreses results showed several unique characteristics compared to typical electrophoreses results obtained using polyacrylamide matrices.
Ever since the first example of a double‐decker complex (SnPc2) was discovered in 1936, MPc2 complexes with π systems and chemical and physical stabilities have been used as components in molecular electronic devices. More recently, in 2003, TbPc2 complexes were shown to be single‐molecule magnets (SMMs), and researchers have utilized their quantum tunneling of the magnetization (QTM) and magnetic relaxation behavior in spintronic devices. Herein, recent developments in LnIII‐Pc‐based multiple‐decker SMMs on surfaces for molecular spintronic devices are presented. In this account, we discuss how dinuclear TbIII‐Pc multiple‐decker complexes can be used to elucidate the relationship between magnetic dipole interactions and SMM properties, because these complexes contain two TbPc2 units in one molecule and their intramolecular TbIII?TbIII distances can be controlled by changing the number of stacks. Next, we focus on the switching of the Kondo signal of TbIII‐Pc‐based multiple‐decker SMMs that are adsorbed onto surfaces, their characterization using STM and STS, and the relationship between the molecular structure, the electronic structure, and the Kondo resonance of TbIII‐Pc multiple‐decker complexes.
Regio‐ and stereoselective 1,3‐dipolar cycloaddition of nitrile oxides to internal 2‐pentenols and α,β‐unsaturated esters catalyzed by (?) sparteine‐lanthanide complexes affords corresponding 3‐aryl‐2‐isoxazolines with enantioselectivities up to 68% ee. 相似文献
Artificial special wetting surfaces have drawn much interest due to their important applications in many fields. Nevertheless, tremendous challenges still remain for the fabrication of wetting surfaces with durable and self‐healing properties. Here, recent progress of durable, self‐healing wetting surfaces is highlighted by discussing the fabrications of several typical wetting surfaces including superhydrophobic surfaces, superamphiphobic surfaces, underwater superoleophobic surfaces, and high hydrophilic antifouling surfaces based on expertise and related research experience. To conclude, some perspectives on the future research and development of these special wetting surfaces are presented.
As an ideal candidate in mesenchymal stem cells (MSCs) transplantation , salvianolic acid B can not only protect MSCs against ?OH‐induced damages, but also promote their proliferation. This extraordinary effect may be attributed to catechol moieties with antioxidant & Fe‐chelating capacities, and to ester, carboxylic, or benzofuran moieties with proliferation‐promoting potential. More details about this figure will be discussed by Dr. Xican Li and his group on pages 924–929 in this issue.
This review seeks to provide coverage on the recent advances in chiral squaramide‐catalyzed asymmetric transformations and their applications in the synthesis of a variety of chiral biologically active compounds. It aims to give an overview highlighting the new reaction types and enantioenriched medicinal scaffolds developed in the last few years.
Solid‐state hydrogen storage using various materials is expected to provide the ultimate solution for safe and efficient on‐board storage. Complex hydrides have attracted increasing attention over the past two decades due to their high gravimetric and volumetric hydrogen densities. In this account, we review studies from our lab on tailoring the thermodynamics and kinetics for hydrogen storage in complex hydrides, including metal alanates, borohydrides and amides. By changing the material composition and structure, developing feasible preparation methods, doping high‐performance catalysts, optimizing multifunctional additives, creating nanostructures and understanding the interaction mechanisms with hydrogen, the operating temperatures for hydrogen storage in metal amides, alanates and borohydrides are remarkably reduced. This temperature reduction is associated with enhanced reaction kinetics and improved reversibility. The examples discussed in this review are expected to provide new inspiration for the development of complex hydrides with high hydrogen capacity and appropriate thermodynamics and kinetics for hydrogen storage.
Cascade reactions are powerful tools for rapidly assembling complex molecular architectures from readily available starting materials in a single synthetic operation. Their marriage with asymmetric organocatalysis has led to the development of novel techniques, which are now recognized as reliable strategies for the one‐pot enantioselective synthesis of stereochemically dense molecules. In recent years, even more complex synthetic challenges have been addressed by applying the principle of vinylogy to the realm of organocascade catalysis. The key to the success of vinylogous organocascade reactions is the unique ability of the chiral organocatalyst to transfer reactivity to a distal position without losing control on the stereo‐determining events. This approach has greatly expanded the synthetic horizons of the field by providing the possibility of forging multiple stereocenters in remote positions from the catalyst's point of action with high selectivity, while simultaneously constructing multiple new bonds. This article critically describes the developments achieved in the field of enantioselective vinylogous organocascade reactions, charting the ideas, the conceptual advances, and the milestone reactions that have been essential for reaching highly practical levels of synthetic efficiency.
下载免费PDF全文