Indolo[3,2-b]carbazole-based thin-film transistors with high mobility and stability

Proper functionalization of indolo[3,2-b]carbazole led to a new class of high-performance organic semiconductors suitable for organic thin-film transistor (OTFT) applications. While 5,11-diaryl-substituted indolo[3,2-b]carbazoles without long alkyl side chains provided amorphous thin films upon vacuum deposition, those with sufficiently long alkyl side chains such as 5,11-bis(4-octylphenyl)indolo[3,2-b]carbazole self-organized readily into highly crystalline layered structures under similar conditions. OTFTs using channel semiconductors of this nature exhibited excellent field-effect properties, with mobility up to 0.12 cm(2) V(-1) s(-1) and current on/off ratio to 10(7). As this class of organic semiconductors has relatively low HOMO levels and large band gaps, they also displayed good environmental stability even with prolonged exposure to amber light, an appealing characteristic for OTFT applications.     

2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes: a new class of high-performance semiconductors for organic field-effect transistors

2,6-Diphenylbenzo[1,2-b:4,5-b']dichalcogenophenes including thiophene, selenophene, and tellurophene analogues as organic semiconductors for field-effect transistors were effectively synthesized in three steps from commercially available 1,4-dibromobenzene. All three benzodichalcogenophenes acted as good p-type semiconductors, and particularly the selenophene analogue, 2,6-diphenylbenzo[1,2-b:4,5-b']diselenophene, showed high FET mobility of 0.17 cm2 V-1 s-1.     

Linear fused dithieno[2,3-b:3'2'-d]thiophene diimides

Linear fused dithieno[2,3-b:3'2'-d]thiophene diimides (DTTDIs, 1-4) were synthesized. Physicochemical investigations suggested that these diimides might be used as potential n-channel organic semiconductors. Single-crystal analysis of N-propyl DTTDI (1) revealed that molecules adopt a layered herringbone packing motif.     

Spectrophotometric study of the supramolecular complexes of [60]- and [70]Fullerenes with biscalix[6]arene and crown[4]calix[6]arene

[60]- and [70]Fullerenes have been shown to form 1:1 supramolecular complexes with bis[2-(5,11,17,23,29,35-hexa-tert-butyl-37,38,39,40,41-pentahydroxycalix[6]arenyl-oxy ethyl ether) (1) and 5,11,17,23,29,35-hexa-tert-butyl-37,38,40,41-tetra hydroxyl-39,42-(crown-4)calix[6]arene (2) in CHCl3 medium by electronic absorption spectroscopy. Formation constants (K) of the complexes of [60]- and [70]fullerenes with 1 and 2 have been determined at room temperature from which free energy of formation values of the complexes have been estimated. The very high formation constant value of [60]fullerene/1 complex (5900 dm3 mol-1) in indicative of formation of inclusion complex. Moreover, PM3 calculations reveal that intermolecular interaction between [60]fullerene and 1 proceeds through quite deep energy molecular orbital.     

Monofunctionalized pillar[5]arene-based stable [1]pseudorotaxane

A new monofunctionalized pillar[5]arene bearing imidazolium moiety that formed stable [1]pseudorotaxane even at high concentration (100 mmol/L) was reported. [1]Rotaxane was obtained effi ciently through thiol-ene reaction from [1]pseudorotaxane which further confi rmed the formation of [1]pseudorotaxane.     

Anionic layered networks reconstructed from [Cd(SCN)3]infinity(-) chains in pseudo one-dimensional conducting salts of halogenated tetrathiafulvalenes

The electrocrystallization of diiodo- and dibromo-ethylenedithiotetrathiafuvalene (EDT-TTFI2 and EDT-TTFBr2) in the presence of the polymeric 1D [Et4N][Cd(SCN)3] as an electrolyte affords two different salts, formulated as [EDT-TTF-I2]4[Cd3(NCS)8] x CH3CN x H2O (1) and [EDT-TTF-Br2]10[Cd5(SCN)14] x 2 TCE (2), characterized by a two-dimensional segregation of the partially oxidized donor molecules and the polymeric anionic network incorporating embedded solvent molecules. Both salts exhibit a partial charge transfer, that is, rho = 0.5 in 1 and an unconventional rho = 0.4 in 2. They behave as semiconductors with sigma RT = 0.67 and 33 S cm(-1) and activation energies of 330 and 370 K for 1 and 2, respectively. Compared with a 1:3 Cd/SCN ratio of the starting electrolyte, the reconstructed, thiocyanate (SCN)-deficient motifs [Cd3(NCS)8](2-) and [Cd5(SCN)14](4-) organize into layered hollow structures with cavities filled by solvent molecules, halogen-bonded to the halogenated TTF molecules, through a C(TTF)-I...N[triple bond]C-CH3 interaction in 1, through a type II C(TTF)-Br...Cl-C(TCE) halogen/halogen interaction in 2. Band structure and Fermi surface calculations for the two salts indicate a two-dimensional character, while the semiconducting properties of the salts are attributed to an efficient nesting of the hidden 1D Fermi surfaces.     

Modular synthesis of unsymmetrical [1]benzothieno[3,2-b][1]benzothiophene molecular semiconductors for organic transistors

A modular approach to underexplored, unsymmetrical [1]benzothieno[3,2-b][1]benzothiophene (BTBT) scaffolds delivers a library of BTBT materials from readily available coupling partners by combining a transition-metal free Pummerer CH–CH-type cross-coupling and a Newman–Kwart reaction. This effective approach to unsymmetrical BTBT materials has allowed their properties to be studied. In particular, tuning the functional groups on the BTBT scaffold allows the solid-state assembly and molecular orbital energy levels to be modulated. Investigation of the charge transport properties of BTBT-containing small-molecule:polymer blends revealed the importance of molecular ordering during phase segregation and matching the highest occupied molecular orbital energy level with that of the semiconducting polymer binder, polyindacenodithiophene-benzothiadiazole (PIDTBT). The hole mobilities extracted from transistors fabricated using blends of PIDTBT with phenyl or methoxy functionalized unsymmetrical BTBTs were double those measured for devices fabricated using pristine PIDTBT. This study underscores the value of the synthetic methodology in providing a platform from which to study structure–property relationships in an underrepresented family of unsymmetrical BTBT molecular semiconductors.

A modular approach to underexplored, unsymmetrical [1]benzothieno[3,2-b][1]benzothiophene (BTBT) scaffolds, combining a transition-metal free Pummerer CH–CH-type cross-coupling and a Newman–Kwart reaction, delivers a library of BTBT materials.     

Interface engineering in high-performance low-voltage organic thin-film transistors based on 2,7-dialkyl-[1]benzothieno[3,2-b][1]benzothiophenes

We investigated two different (2,7-dialkyl-[1]benzothieno[3,2-b][1]benzothiophenes; C(n)-BTBT-C(n), where n = 12 or 13) semiconductors in low-voltage operating thin-film transistors. By choosing functional molecules in nanoscaled hybrid dielectric layers, we were able to tune the surface energy and improve device characteristics, such as leakage current and hysteresis. The dipolar nature of the self-assembled molecules led to a shift in the threshold voltage. All devices exhibited high charge carrier mobilities of 0.6-7.0 cm(2) V(-1) s(-1). The thin-film morphology of BTBT was studied by means of atomic force microscopy (AFM), presented a dependency upon the surface energy of the self-assembled monolayer (SAM) hybrid dielectrics but not upon the device performance. The use of C(13)-BTBT-C(13) on hybrid dielectrics of AlO(x) and a F(15)C(18)-phosphonic acid monolayer led to devices with a hole mobility of 1.9 cm(2) V(-1) s(-1) at 3 V, on/off ratio of 10(5), small device-device variation of mobility, and a threshold voltage of only -0.9 V, thus providing excellent characteristics for further integration.     

Synthesis of 1-azacycl[3.2.2]azine and 1-azabenzo[h]cycl[3.2.2]azine

1-Azacycl[3.2.2]azines were synthesized from 2-methylthioimidazo[1,2-a]pyridines, 2a and 2b , by using [2 + 8] cycloaddition reaction with dimethyl acetylenedicarboxylate as the key step. Synthesis of 1-azabenzo-[h]cycl[3.2.2]azine was also described.     

Synthesis of tetrahydrodibenzodipyrazolo-[1,2,5,8,9,12]- and-[1,2,5,6,9,12]-hexaazacyclotetradecine derivatives

The reaction of nickel(II) nitrate with 4-(2-bromo-4-methyl-1-phenylazo)-3-amino-5-methy1-2-alkylpyrazoles by refluxing in dimethylformamide in the presence of K₂CO₃ followed by purification with a column filled with Al₂O₃ gave [1,10,11,20-tetrahydro-1, 11-dipropyl-3,8,13,18-tetramethyIdibenzo[c,j]dipyrazolo[3,4-f:3,4-m] [1,2,5,8,9,12]hexaazacyclotetradecinato(2-)-4,10,14,20]nickel and [1,14,15,20tetrahydro-1, 14-dipropyl-3,7,12,17-tetramethyldibenzo[c,j]dipyrazolo[4,3-g:3,4-m] [1,2,5,6,9,12]hexaazacyclotetradecinato(2-)-5,10,15,20]nickel, which were characterized by the results of elementary analysis and the IR, UV, PMR, and mass spectra.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1097–1103, August, 1978.     

Strain induced polymorphism and band structure modulation in low-temperature 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene single crystal

Organic semiconductors are inherently soft, making it possible to increase their mobilities by strains. Such a unique feature can be exploited directly in flexible electronics for improved device performance. The 2,7-dioctyl[1]benzothieno[3,2-b][1]-benzothiophene derivative, C8-BTBT is one of the best small-molecule hole transport materials. Here, we demonstrated its band structure modulation under strains by combining the non-equilibrium molecular dynamics simulations and first-principles calculations. We found that the C8-BTBT lattice undergoes a transition from monoclinic to triclinic crystal system at the temperature below 160 K. Both shear and uniaxial strains were applied to the low-temperature triclinic phase of C8-BTBT, and polymorphism was identified in the shear process. The band width enhancement is up to 8% under 2% of compressive strain along the x direction, and 14% under 4% of tensile strain along the y direction. The band structure modulation of C8-BTBT can be well related to its herringbone packing motifs, where the edge to face and edge to edge pairs constitute two-dimensional charge transport pathways and their electronic overlaps determine the band widths along the two directions respectively. These findings pave the way for utilizing strains towards improved performance of organic semiconductors on flexible substrates, for example, by bending the substrates.     

新型色满酮并环己烷螺环氧化吲哚类化合物的合成

以色酮 氧化吲哚合成子与硝基苯乙烯,在催化剂DBU作用下,在二氯甲烷中发生Michael/Michael加成环化反应,合成了9个未见文献报道的新型色满酮并环己烷螺环氧化吲哚类化合物3a~3i产率72%~87%, dr值4/1~2/1, 其结构经¹H NMR, ¹³C NMR和HR-MS（ESI-TOF）表征确定。     

Synthesis and electronic properties of series of oligothiophene-[1,10]phenanthrolines

Organic semiconductors containing metal binding sites within their molecular backbones are of a general interest in organic materials chemistry. In this paper, we describe a straightforward synthetic procedure, which gives access to a series of 2-(oligothienyl)-[1,10]phenanthrolines (nT-phen), 2,9-bis(oligothienyl)-[1,10]phenanthrolines (nT-phen-nT) and 2,2'-(oligothienyl)bis-[1,10]phenanthrolines (phen-nT-phen). By a Negishi-type cross coupling of 2-iodo-[1,10]phenanthroline or 2,9-diiodo-[1,10]phenanthroline with in situ generated alpha-zinc derivatives of different mono-, ter-, and quinquethiophenes we were able to synthesize the corresponding oligothienyl-phenanthrolines in medium to excellent yields. Furthermore, characterization of the optical properties of the new materials indicated that the two subunits, oligothiophene and phenanthroline, are in pi-conjugation. Characterization of the redox properties revealed additional evidence for the role of [1,10]phenanthroline as a pi-bridging unit in the nT-phen-nT series.     

In the twilight zone between [2]pseudorotaxanes and [2]rotaxanes

A [2]pseudorotaxane, based on a semi-dumbbell-shaped component containing asymmetrically substituted monopyrrolotetrathiafulvalene and 1,5-dioxynaphthalene recognition sites for encirclement by cyclobis(paraquat-p-phenylene) and with a "speed bump" in the form of a thiomethyl group situated between the two recognition sites, has been self-assembled. This supramolecular entity is a mixture in solution of two slowly interconverting [2]pseudorotaxanes, one of which is on the verge of being a [2]rotaxane at room temperature, allowing it to be isolated by employing flash column chromatography. These two [2]pseudorotaxanes were both characterized in solution by UV/Vis and (1)H NMR spectroscopies (1D and 2D) and also by differential pulse voltammetry. The spectroscopic and electrochemical data reveal that one of the complexes behaves wholly as a [2]pseudorotaxane, while the other has some [2]rotaxane character to it. The kinetics of the shuttling of cyclobis(paraquat-p-phenylene) between the monopyrrolotetrathiafulvalene and the 1,5-dioxynaphthalene recognition sites have been investigated at different temperatures. The shuttling processes, which are accompanied by detectable color changes, can be monitored using UV/Vis and (1)H NMR spectroscopies; the spectroscopic data have been employed in the determination of the rate constants, free energies of activation, enthalpies of activation, and the entropies of activation for the translation of cyclobis(paraquat-p-phenylene) between the two recognition sites.     

Helic[6]arene-Based Chiral Pseudo[1]rotaxanes and [1]Rotaxanes

Chiral pseudo[1]rotaxanes and [1]rotaxanes constructed from macrocyclic arenes still remain a big challenge mainly owing to the lack of such chiral macrocycles. In this work, a new system of chiral pseudo[1]rotaxanes formed by self-inclusion of helic[6]arene containing amide linked with the terminal tertiary amines was first discovered. Based on an atom-economic stopping strategy, a pair of chiral [1]rotaxanes were conveniently obtained in almost quantitative yields by blocking the pseudo[1]rotaxanes with monobenzyl bromide of tetraphenylethene. The structures of pseudo[1]rotaxanes and [1]rotaxanes were characterized by 2D NMR spectra in solution, combined with DFT calculations. The photophysical properties further revealed the efficient chirality transfer of helic[6]arene to the tetraphenylethene moiety, compared to their unthreaded chiral isomers. The discovery of the chiral pseudo[1]rotaxanes allows for a wide and available synthesis of chiral [1]rotaxanes, and also opening a new avenue to the design of chiral supramolecular materials.     

Supramolecular interactions of [60]- and [70]fullerenes with calix[n]arenes

[60]- and [70]fullerenes have been shown to form 1:1 supramolecular complexes with (i) 24,26-dimethoxy-25,27-dihydroxy-5,11,17,23-tetra(4-tert-butyl)calix[4]arene (1) and (ii) 37,39,41-trimethoxy-38,40,42-trihydroxy-5,11,17,23,29,35-hexa(4-tert-butyl)calix[6]arene (2) in CCl(4) medium by absorption spectroscopy. Charge transfer absorption bands of the complexes have been located in each of the cases (except [70]fullerene-2 complex) studied from which the vertical ionisation potential of 1 has been obtained. Formation constants of the complexes have been determined at four different temperatures from which the enthalpies and entropies of formation of the complexes have been obtained. Moreover, the formation constant of [70]fullerene-2 complex is higher than that of the [60]fullerene-1 and [60]fullerene-2 complexes at all the four temperatures studied. This has been accounted in terms of greater cavity size of 2 which is a calix[6]arene compared to 1 which is a calix[4]arene and also by the fact that a high degree of preorganisation takes place in case of 2 through intramolecular H-bonding at its lower rim.     

Synthesis and Characterization of [1,2,4,6]Thiatriazino[2,3-a][1,3]benzimidazol-1(2H)-one and [1,3,5]Thiadiazino[3,4-a][1,3]benzimidazol-2-imine

Abstract

The reaction of thionyl chloride with amidines 2, derived from N-benzimidazol-2-yl imidates 1, leads to [1,2,4,6]thiatriazino[2,3-a][1,3]benzimidazol-1(2H)-one 3 in good yields. [1,3,5]Thiadiazino[3,4-a][1,3]benzimidazol-2-imine 4 was prepared by condensation of NaSCN with benzimidazol-2-yl imidate 1. The isolated compounds 3 and 4 were identified by spectroscopic methods including IR, ¹H NMR, and ¹³C NMR as well as elemental analyses and MS of 3d and 4b.

GRAPHICAL ABSTRACT      

Stable pillar [5] arene-based pseudo [1] rotaxanes formed in polar solution

Mono-alkyl-functionalized pillar[5] arenes P1,P2,and P3 were synthesized by click reaction,which exhibited different self-assembly behavior in polar solvent DMSO.Stable pseudo [1] rotaxane was formed by the self-complexation from P1 or P2,whereas,concentration-dependent pseudorotaxane structures were generated by P3 which bearing more flexible side chain.Interestingly,the obtained pseudo[1] rotaxanes exhibited a dynamic fast assembly process upon adding NaBF₄,resulting in the formation of Na⁺-induced pseudorotaxanes.     

Calix[6]pyrrole and hybrid calix[n]furan[m]pyrroles (n+m=6): syntheses and host-guest chemistry

Calix[6]pyrrole 2 and the "hybrid systems" calix[3]furan[3]pyrrole 12, calix[2]furan[4]pyrrole 13, and calix[1]furan[5]pyrrole 14, have been synthesized by increasing conversion of the furan units present in the readily accessible calix[6]furan 3 to pyrroles. The host-guest chemistry of these novel macrocycles towards a number of anions, including halogen ions, dihydrogen phosphate, hydrogen sulfate, nitrate, and cyanide has been investigated in solution by (1)H NMR titration techniques and/or phase transfer experiments. The solid-state structures of the free receptors 2, 12, and 13, the 1:1 complexes of calix[6]pyrrole 2 with chloride and bromide, and the 1:1 complex of 14 with chloride are also reported.     

Synthesis and characterization of bis-[1]rotaxanes via salen-bridged bis-pillar[5]arenes

The series of salen-bridged bis-pillar[1]arenes were conveniently prepared by condensation reaction of5,5'-methylenebis(2-hydroxybenzalde hyde)or 5,5'-(propane-2,2-diyl)bis(2-hydroxybenzaldehyde)with mono-amido-functionalized pillar[5]arenes containing different terminal aminoalkyl groups in refluxing ethanol.The^1H NMR and 2D-NOESY spectra indicated that the salen-bridged bis-pillar[5]arenes with longer allcylene linker(n=3,4,6)formed the fascinating bis-[1]rotaxanes,while the salenbridged bis-pillar[5]arenes with short hydrazine and ethylenediamino linker(n=0,2)predominately existed in free form.The single crystal structure of the bis-pillar[5]are ne ambiguously indicated that two propylenediamino linker inserted in to two cavities of pillar[5]arene to form a novel bis-[1]rotaxanes.