Fragmentation induced in atmospheric pressure photoionization of peptides

In this work, the fragmentation of peptides under atmospheric pressure photoionization conditions is investigated. Intensive fragmentations into b/y- and c-sequence ions are reported. Abundance of these c-ions appeared to be related to the quantity of dopant infused and to the disappearance of the doubly protonated peptide ion. A careful analysis of the role of the dopant indicates that the fragmentations are not dependent on the nature of the dopant but on their ionization efficiencies. This result shows that the fragmentation arises from the reaction of the protonated peptide with photoelectrons released upon ionization of the dopant in an electron capture dissociation/electron transfer dissociation (ECD/ETD) type mechanism. Experiments with peptides bearing a single proton indicate that additional mechanisms are involved. H-atom transfer reactions are suggested to be responsible for the fragmentations as well. Those atoms could arise either from the dopant ions or from negatively charged solvent nanodroplets. This is the first report of an ECD/ETD mechanism in a dense medium and at atmospheric pressure.     

Investigation of c ions formed by N‐terminally charged peptides upon collision‐induced dissociation

Peptide fragments such as b and y sequence ions generated upon low‐energy collision‐induced dissociation have been routinely used for tandem mass spectrometry (MS/MS)‐based peptide/protein identification. The underlying formation mechanisms have been studied extensively and described within the literature. As a result, the ‘mobile proton model’ and ‘pathways in competition model’ have been built to interpret a majority of peptide fragmentation behavior. However, unusual peptide fragments which involve unfamiliar fragmentation pathways or various rearrangement reactions occasionally appear in MS/MS spectra, resulting in confused MS/MS interpretations. In this work, a series of unfamiliar c ions are detected in MS/MS spectra of the model peptides having an N‐terminal Arg or deuterohemin group upon low‐energy collision‐induced dissociation process. Both the protonated Arg and deuterohemin group play an important role in retention of a positive charge at the N‐terminus that is remote from the cleavage sites. According to previous reports and our studies involving amino acid substitutions and hydrogen–deuterium exchange, we propose a McLafferty‐type rearrangement via charge‐remote fragmentation as the potential mechanism to explain the formation of c ions from precursor peptide ions or unconventional b ions. Density functional theory calculations are also employed in order to elucidate the proposed fragmentation mechanisms. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of chromophore‐embedded polyurethanes for electrooptical materials

We carried out the polyaddition of dye‐embedded diols with diisocyanates to obtain novel nonlinear optical (NLO) polyurethanes, where the NLO units were embedded in the polymer backbone. The obtained polymers showed high glass‐transition temperatures (138–184 °C) and thermal stability (temperature of 10% weight loss under nitrogen = 227–287 °C). The λ maximum of the polymers was 521–556 nm. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2620–2624, 2001     

Fragmentation behavior of metal‐coded affinity tag (MeCAT)‐labeled peptides

Quantitative proteomics has become an important method in modern life sciences. Besides protein identification, the aspect of quantification is of rapidly increasing relevance. MeCAT (metal‐coded affinity tagging) is able to provide a tool that enables relative as well as absolute quantification. For structural elucidation, knowledge on the fragmentation behavior of MeCAT‐modified peptides is highly beneficial. Therefore, the fragmentation behavior of MeCAT‐labeled peptides under collision induced dissociation (CID), electron capture dissociation (ECD) and infrared multiphoton dissociation (IRMPD) conditions was studied. Application of CID and ECD allowed a straight‐forward sequence elucidation of MeCAT‐labeled peptides. During IRMPD all MeCAT‐labeled peptides form characteristic fragments resulting from the fragmentational cleavage of the tagging group, thus, providing a screening method for the identification of labeled compounds. Furthermore, occurring side reactions during the labeling process were investigated. By‐products were structurally characterized and reaction conditions were optimized in order to prevent the formation of these. Copyright © 2009 John Wiley & Sons, Ltd.     

Fragmentation of intra-peptide and inter-peptide disulfide bonds of proteolytic peptides by nanoESI collision-induced dissociation

Characterisation and identification of disulfide bridges is an important aspect of structural elucidation of proteins. Covalent cysteine-cysteine contacts within the protein give rise to stabilisation of the native tertiary structure of the molecules. Bottom-up identification and sequencing of proteins by mass spectrometry most frequently involves reductive cleavage and alkylation of disulfide links followed by enzymatic digestion. However, when using this approach, information on cysteine-cysteine contacts within the protein is lost. Mass spectrometric characterisation of peptides containing intra-chain disulfides is a challenging analytical task, because peptide bonds within the disulfide loop are believed to be resistant to fragmentation. In this contribution we show recent results on the fragmentation of intra and inter-peptide disulfide bonds of proteolytic peptides by nano electrospray ionisation collision-induced dissociation (nanoESI CID). Disulfide bridge-containing peptides obtained from proteolytic digests were submitted to low-energy nanoESI CID using a quadrupole time-of-flight (Q-TOF) instrument as a mass analyser. Fragmentation of the gaseous peptide ions gave rise to a set of b and y-type fragment ions which enabled derivation of the sequence of the amino acids located outside the disulfide loop. Surprisingly, careful examination of the fragment-ion spectra of peptide ions comprising an intramolecular disulfide bridge revealed the presence of low-abundance fragment ions formed by the cleavage of peptide bonds within the disulfide loop. These fragmentations are preceded by proton-induced asymmetric cleavage of the disulfide bridge giving rise to a modified cysteine containing a disulfohydryl substituent and a dehydroalanine residue on the C-S cleavage site.     

Characterization of glycopeptides by combining collision‐induced dissociation and electron‐transfer dissociation mass spectrometry data

Structural characterization of a glycopeptide is not easily attained through collision‐induced dissociation (CID), due to the extensive fragmentation of glycan moieties and minimal fragmentation of peptide backbones. In this study, we have exploited the potential of electron‐transfer dissociation (ETD) as a complementary approach for peptide fragmentation. Model glycoproteins, including ribonuclease B, fetuin, horseradish peroxidase, and haptoglobin, were used here. In ETD, radical anions transfer an electron to the peptide backbone and induce cleavage of the N–Cα bond. The glycan moiety is retained on the peptide backbone, being largely unaffected by the ETD process. Accordingly, ETD allows not only the identification of the amino acid sequence of a glycopeptide, but also the unambiguous assignment of its glycosylation site. When data acquired from both fragmentation techniques are combined, it is possible to characterize comprehensively the entire glycopeptide. This is being achieved with a mass spectrometer capable of alternating between CID and ETD on‐the‐fly during an LC/MS/MS analysis. This is demonstrated here with several tryptic glycopeptides. Copyright © 2008 John Wiley & Sons, Ltd.     

Collision‐induced dissociation mass spectra of glucosinolate anions

Collision‐induced dissociation (CID) mass spectra of differently substituted glucosinolates were investigated under negative‐ion mode. Data obtained from several glucosinolates and their isotopologues (³⁴S and ²H) revealed that many peaks observed are independent of the nature of the substituent group. For example, all investigated glucosinolate anions fragment to produce a product ion observed at m/z 195 for the thioglucose anion, which further dissociates via an ion/neutral complex to give two peaks at m/z 75 and 119. The other product ions observed at m/z 80, 96 and 97 are characteristic for the sulfate moiety. The peaks at m/z 259 and 275 have been attributed previously to glucose 1‐sulfate anion and 1‐thioglucose 2‐sulfate anion, respectively. However, based on our tandem mass spectrometric experiments, we propose that the peak at m/z 275 represents the glucose 1‐thiosulfate anion. In addition to the common peaks, the spectrum of phenyl glucosinolate (β‐D ‐Glucopyranose, 1‐thio‐, 1‐[N‐(sulfooxy)benzenecarboximidate] shows a substituent‐group‐specific peak at m/z 152 for C₆H₅‐C(?NOH)S^?, the CID spectrum of which was indistinguishable from that of the anion of synthetic benzothiohydroxamic acid. Similarly, the m/z 201 peak in the spectrum of phenyl glucosinolate was attributed to C₆H₅‐C(?S)OSO₂^?. Copyright © 2009 John Wiley & Sons, Ltd.     

Nanocomposites of NLO chromophore‐modified layered silicates and polypropylene

Intercalation of guest species into layered inorganic solids is a method of producing ordered inorganic–organic assemblies with unique microstructures controlled by host–guest and guest–guest interactions. Smectite clay minerals, such as montmorillonite, having appropriate functional molecules in between the silicate layers are supposed to exhibit a wide range of novel characteristics. Nanocomposite material based on maleic anhydride‐grafted polypropylene and dye‐modified layered silicate was developed. Characteristics of organo‐modified montmorillonite particles and polymer/clay hybrids have been investigated through FTIR, SAXS, DSC, UV measurements, and transmission electron microscopy. The results of the intercalation process, structural characterization, and thermal properties will be discussed in comparison with the intercalation and nanocomposite preparation results. The intercalation was successfully conducted by the ion‐exchange method. It was shown that intercalated dibenzilidene acetone type chromophores exist in the clay galleries in an aggregated form, probably as J‐aggregates. This feature strongly effects on optical and nonlinear optical properties of nanocomposites. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2493–2502, 2005     

Comparison of in‐source collision‐induced dissociation and beam‐type collision‐induced dissociation of emerging synthetic drugs using a high‐resolution quadrupole time‐of‐flight mass spectrometer

In‐source collision‐induced dissociation (CID) is commonly used with single‐stage high‐resolution mass spectrometers to gather both a molecular formula and structural information through the collisional activation of analytes with residual background gas in the source region of the mass spectrometer. However, unlike tandem mass spectrometry, in‐source CID does not involve an isolation step prior to collisional activation leading to a product ion spectrum composed of fragment ions from any analyte present during the activation event. This work provides the first comparison of in‐source CID and beam‐type CID spectra of emerging synthetic drugs on the same instrument to understand the fragmentation differences between the two techniques and to contribute to the scientific foundations of in‐source CID. Electrospray ionization–quadrupole time‐of‐flight (ESI‐Q‐TOF) mass spectrometry was used to generate product ion spectra from in‐source CID and beam‐type CID for a series of well‐characterized fentanyl analogs and synthetic cathinones. A comparison between the fragmentation patterns and relative ion abundances for each technique was performed over a range of fragmentor offset voltages for in‐source CID and a range of collision energies for beam‐type CID. The results indicate that large fragmentor potentials for in‐source CID tend to favor higher energy fragmentation pathways that result in both kinetically favored pathways and consecutive neutral losses, both of which produce more abundant lower mass product ions relative to beam‐type CID. Although conditions can be found in which in‐source CID and beam‐type CID provide similar overall spectra, the in‐source CID spectra tend to contain elevated noise and additional chemical background peaks relative to beam‐type CID.     

Increased sequence coverage of thymine‐rich oligodeoxynucleotides by infrared multiphoton dissociation compared to collision‐induced dissociation

Infrared multiphoton dissociation (IRMPD) of thymine‐rich oligodeoxynucleotides in a linear ion‐trap mass spectrometer affords far more extensive fragmentation than conventional collision‐induced dissociation (CID). For oligodeoxynucleotides containing one non‐thymine base, CID results primarily in cleavage on the 3′ side of the non‐thymine nucleobase, whereas IRMPD results in cleavages between all the nucleobases and thus provides complete sequence coverage. Furthermore, for oligodeoxynucleotides containing a single non‐thymine base, it is shown that the full series of diagnostic sequence ions observed in the IRMPD mass spectra arise from secondary dissociation of the two primary products formed from the initial cleavage site located next to the non‐thymine base. Copyright © 2010 John Wiley & Sons, Ltd.