Bending dual-core photonic crystal fiber coupler

In this paper, we systematically study a designed structure of a bending dual-core photonic crystal fiber (PCF). We propose the controllable wavelength-selective coupling PCF. This coupler allows highly accurate control of the filtering wavelength. The different wavelengths can be selected by controlling the bending radius of the fiber. Coupling characteristics of novel bending wavelength-selective coupling PCF are evaluated by using a vector finite element method and their application to a multiplexer demultiplexer (MUX–DEMUX) based on the novel coupler is investigated. When the fiber length is 4168 μm, the bending radius of PCF couplers for 1.48/1.55 μm, 1.3/1.55 μm, 0.98/1.55 μm, and 0.85/1.55 μm is calculated, respectively, and the beam propagation analysis is performed. Different from the traditional wavelength-selective coupling PCF, the dual-core PCF is bent and it can realize the separation of multiple wavelengths.     

Design of a single-polarization single-mode photonic crystal fiber double-core coupler

A simple single-polarization single-mode (SPSM) photonic crystal fiber (PCF) coupler with two cores is introduced. The full-vector finite-element method (FEM) is applied to analyze the modal interference phenomenon of the even and odd modes of two orthogonal polarizations and the power propagation within the two cores. Meanwhile, the SPSM coupling wavelength range and its corresponding coupling length for different structure parameters are numerically analyzed. The numerical results show that SPSM coupling can be realized with a broad range of wavelength, and the coupling length can be of millimeter magnitude. Moreover, the SPSM coupling wavelength range and the coupling length can be optimized by designing proper mirco-structure parameters of the coupler.     

Tunable photonic crystal fiber coupler based on a side-polishing technique

A tunable photonic crystal fiber (PCF) coupler, which couples part of the optical power in one PCF with that in another PCF, has been made by side polishing. We fabricated the PCF coupler by mating two side-polished PCFs. We achieved evanescent field coupling between the core modes of the two PCFs by using side polishing to bring the cores close to each other. By adjusting the mating angle between the two side-polished PCFs we obtained as much as 90% tunability in the coupling ratio. The spectrum of the coupling ratio was almost flat, with small ripples, over a 400-nm wavelength range.     

Optimization of polishing parameters for optical coupler based on side-polished photonic crystal fiber

The rapid development in areas such as fiber-optic communication, fiber lasers, and high power transmission has generated an increasing demand for photonic crystal fiber (PCF). However, there is no well-proven approach for PCF coupler fabrication because most approaches proposed introduce defects that are non-negligible in practice. Previously, we have made an attempt by applying side-adhering technique to PCF coupler fabrication. This paper presents our recent effort in establishing a model of side-polished PCF (SPPCF) coupler and tuning various fabrication parameters in search for its desirable characteristics. It is found that the optimal coupling effect is achieved when the residual radius is set 5.7 μm and the polishing angle is set 0°. The optimizations presented in this paper may serve as a foundation for further research and development of SPPCF coupler.     

Design of diamond-shape photonic crystal fiber polarization filter based on surface plasma resonance effect

A novel plasmonic polarization filter based on the diamond-shape photonic crystal fiber(PCF) is proposed. The resonant coupling characteristics of the PCF polarization filter are investigated by the full-vector finite-element method. By optimizing the geometric parameters of the PCF, when the fiber length is 5 mm, the polarization filter has a bandwidth of 990 nm and an extinction ratio(ER) of lower than -20 dB. Moreover, a single wavelength polarization filter can also be achieved, along with an ER of -279.78 dB at wavelength 1.55 μm. It is believed that the proposed PCF polarization filter will be very useful in laser and optical communication systems.     

Coupling characteristics of high birefringence dual-core As2S3 rectangular lattice photonic crystal fiber

A type of As2S3 chalcogenide glass mid-infrared dual-core photonic crystal fiber has been proposed.The dualcore photonic crystal fiber(PCF) consists of two asymmetric cores.The high polarization property and the coupling characteristics have been studied by using the finite element method and mode coupling theory.Numerical results show that the birefringence at wavelength λ = 10 μm is up to 0.01386 and the coupling length can reach wavelength λ = 5 μm,261 μm and 271.44 μm for x-polarized mode and y-polarized mode,respectively.It demonstrates that a 6.786-mm-long fiber can exhibit an extinction ratio of better than 10 dB and a bandwidth of 180 nm.     

Design and analysis of thermally tunable liquid crystal filled hybrid photonic crystal fiber coupler

We propose a novel tunable photonic crystal fiber (PCF) coupler scheme, that the light is coupled between a total internal reflection (TIR) guiding core and a photonic bandgap (PBG) guiding core. By introducing the thermo-optic responsive nematic liquid crystals (NLC) into the air holes around the PBG core, the hybrid PCF based coupler exhibits enhanced thermal tunability. The thermo-optical characteristics of the proposed coupler are numerically studied using finite element method (FEM) and beam propagation method (BPM). The proposed design can find promising applications in filtering and sensing devices.     

Optical Coherence Tomography Implemented by Photonic Crystal Fiber

We report a photonic crystal fiber (PCF)-based optical coherence tomography (OCT) system, in which conventional single-mode fiber for the transmission line and the fiber coupler for the beam splitter/combiner are replaced with PCF and PCF coupler. The PCF coupler fabricated using the fused biconical tapered (FBT) method showed a nearly flat coupling ratio over a broad spectral bandwidth of 400 nm, which provided an axial resolution of 3-μm for OCT imaging. With a white-light source, the 8-μm thick air gap between two stacked cover glasses was measured, and with a conventional superluminecent diode (SLD) source, the in vitro images of rat eye and Misgurnus mizolepis skin were successfully obtained. The PCF and PCF coupler might enable a white-light as the source for the cost effective and high-resolution OCT system.     

Photonic crystal fiber interferometer composed of a long period fiber grating and one point collapsing of air holes

We present an all-fiber interferometer fabricated with a single piece of an endless single-mode photonic crystal fiber (PCF) by an electric arc discharge. By forming a long period grating (LPG) at a point and collapsing the air holes at another point along the PCF, the simple but effective interferometer could be implemented. The LPG made a strong wavelength selective mode coupling between the core and cladding modes in the interesting wavelength range, while the air-hole collapse induced wavelength independent mode couplings. By cascading them, we could implement the all-fiber interferometer. As a potential application of the proposed all PCF interferometer, strain sensing is experimentally demonstrated.     

中红外高保偏硫系玻璃双芯光子晶体光纤耦合特性研究

设计了一种中红外硫系玻璃双芯光子晶体光纤,利用多极法和模式耦合基本理论研究了这种光纤的耦合特性.数值模拟发现,空气孔间距Λ = 5.4 μm,空气孔半径为r = 1.35 μm,空气填充率d/Λ = 0.5的光纤,在归一化波长λ/Λ = 2.04 μm处双折射可以达到0.551×10^-2,在归一化波长λ/Λ = 0.93 μm处x偏振方向的耦合长度为145.32 μm,y偏振方向的耦合长 关键词： 双芯光子晶体光纤 硫系玻璃 双折射 耦合长度     

光子晶体光纤中布里渊散射声波模式特性的分析

推导了光子晶体光纤中声波微小位移波动方程; 研究了泵浦波长以及纤芯折射率对声波模式的影响; 应用石英圆柱模型研究了小芯径光子晶体光纤中纤芯直径对布里渊声波模式色散的影响. 结果表明在光子晶体光纤中, 纵向声波和横向声波共同作用产生质点声场, 两者相互耦合将产生混合声波模式; 可以通过改变泵浦波长或光子晶体光纤纤芯折射率来改变参与布里渊散射(BS) 过程的声波模式的传播常数; 随着光子晶体光纤(PCF) 纤芯直径的增大, 声波模式耦合程度得到加强, 相速度呈减小趋势, 且同一传播常数下, 声波模式数呈增多趋势; 随着泵浦波频率的增大, 声波相速度减小.     

Enhanced nonlinearity in photonic crystal fiber by germanium doping in the core region

Germanium doping in silica can be used as a method for nonlinearity enhancement.Properties of the enhanced nonlinearity in photonic crystal fiber(PCF)with a GeO2-doped core are investigated theoretically by using all-vector finite element method.Numerical result shows that the nonlinear coefficient of PCF is greatly enhanced with increasing doping concentration,furthermore,optimal radius of the doped region should be considered for the desired operating wavelength.     

Tunable fiber gratings fabricated in photonic crystal fiber by use of mechanical pressure

The mode-coupling properties of tunable long-period fiber gratings (LPGs) formed in photonic crystal fibers (PCFs) are presented. The mode coupling from the fundamental core mode to a cladding mode of a PCF is obtained by use of periodic mechanical pressure. The strength and the wavelength of the resonant peak are tuned by adjusting the grating period and the pressure applied on the PCF. Contrary to the conventional fiber case, the resonant wavelength of the PCF LPG is decreased by increasing the periodicity.     

Coupling characteristics of high birefringence dual-core As2S3 rectangular lattice photonic crystal fiber

A type of As₂S₃ chalcogenide glass mid-infrared dual-core photonic crystal fiber has been proposed. The dual-core photonic crystal fiber (PCF) consists of two asymmetric cores. The high polarization property and the coupling characteristics have been studied by using the finite element method and mode coupling theory. Numerical results show that the birefringence at wavelength λ = 10 μm is up to 0.01386 and the coupling length can reach wavelength λ = 5 μm, 261 μm and 271.44 μm for x-polarized mode and y-polarized mode, respectively. It demonstrates that a 6.786-mm-long fiber can exhibit an extinction ratio of better than -10 dB and a bandwidth of 180 nm.     

光子晶体光纤中级联长周期光栅双谐振波长干涉的研究

通过分析单模光纤SMF中的LPG对的传输特性及几个因素对干涉透射谱的影响,并结合前期工作,主要研究光子晶体光纤(PCF)中的LPG对在1665 nm附近U波段传输特性.结合光栅耦合强度与波长的关系以及拍长与波长的关系,对PCF中LPG对的参数进行选择设计,得到双谐振波长的干涉谱,级联LPG对构成的MZI干涉光谱在两个谐振波长处由于耦合强度不同而不同.     

Wavelength-selective coupling of dual-core photonic crystal fiber and its application

We investigate the coupling characteristics of photonic crystal fiber composed of two cores with different index profiles. The index curves of the fundamental modes of the two cores can cross at a desired wavelength by choosing appropriate index profiles of the cores. As a result, wavelength-selective coupling is achieved. The designed coupler can be applied as an oDtical fiber bandstop filter with 26-nm bandwidth.     

Generation of a mid-infrared broadband polarized supercontinuum in As₂Se₃ photonic crystal fibers

A simplified structure of birefringent chalcogenide As 2 Se 3 photonic crystal fiber(PCF) is designed.Properties of birefringence,polarization extinction ratio,chromatic dispersion,nonlinear coefficient,and transmission are studied by using the multipole method,the finite-difference beam propagation method,and the adaptive split-step Fourier method.Considering that the zero dispersion wavelength of our proposed fiber is about 4 μm,we have analysed the mechanism of spectral broadening in PCFs with different pitches in detail,with femtosecond pulses at a wavelength of 4 μm as the pump pulses.Especially,mid-infrared broadband polarized supercontinuums are obtained in a 3-cm PCF with an optimal pitch of 2 μm.Their spectral width at 20 dB reaches up to 12 μm.In the birefringent PCF,we find that the supercontinuum generation changes with the pump alignment angle.Research results show that no coupling between eigenpolarization modes are observed at the maximum average power(i.e.,37 mW),which indicates that the polarization state is well maintained.     

Analysis of high birefringence photonic crystal fiber with octagonal and squarely lattice

Aiming at the requirement of high birefringence, a new kind of photonic crystal fiber (PCF) with octagonal and squarely lattice is proposed. In this structure, squarely lattices are added in the inner layer to obtain high birefringence. Birefringence and dispersion as a function of wavelength and size of PCF are analyzed by using Finite Element Method (FEM). Simulation results show that this kind of PCF exhibits high birefringence with a magnitude of 10^?3, and one zero dispersion point is obtained simultaneously. In addition, the characteristics of PCF can be tuned by changing the size of fiber.     

Fabrication of all-solid photonic bandgap fiber coupler

We report the fabrication of a tunable all-solid photonic bandgap fiber coupler based on the side-polishing technique. This device is believed to be the first demonstration of a photonic bandgap fiber coupler to eliminate the contamination of the open air holes. By adjusting the length of the interaction section, the tunable coupling ratio as much as 92.5% at 1550 nm is achieved. The investigation of the spectrum properties shows that the coupler has excellent tunability properties, for which the coupling ratio can be smoothly and continuously controlled.     

Broad and tunable multiwavelength fiber laser at the assistance of modulation-instability-assisted four-wave mixing

Based on a piece of highly-nonlinear near-zero-dispersion-flattened photonic crystal fiber (PCF), a broadly tunable multiwavelength erbium-doped fiber laser is proposed by using a bi-directionally pumping scheme. This kind of PCF induces the modulation-instability-assisted four-wave mixing to generate new wavelengths. The proposed laser with excellent stability is tunable and switchable by adjusting the fiber Bragg gratings and the variable optical attenuators. The outstanding merits of the proposed multiwavelength laser are the flexible tuning and the ultrabroad spectral range over 150 nm. Especially, the proposed laser source can work at the wavelength of less than 1460 nm, overcoming the limit of gain bandwidth of erbium-doped fiber.