Solvent-free synthesis of Janus colloidal particles

Taking advantage of the quick and efficient access of vapor to surfaces, a simple, solvent-free method is demonstrated to synthesize Janus colloidal particles in large quantity and with high efficiency. First, at the liquid-liquid interface of emulsified molten wax and water, untreated silica particles adsorb and are frozen in place when the wax solidifies. The exposed surfaces of the immobilized particles are modified chemically by exposure to silane vapor and, in principle, subsequent dissolution of the wax opens up the inner particle surface for further chemical modification. Applying this scheme, this paper describes the production of amphiphilic Janus particles (hydrophobic on one side, hydrophilic on the other) and dipolar Janus particles (positively charged on one side, negatively charged on the other). Janus geometry is confirmed by fluorescence microscopy and flow cytometry. Amphiphilic Janus particles are found to adsorb strongly to the water-oil interface, whereas dipolar particles assemble into chains in the aqueous phase.     

Simple method to produce Janus colloidal particles in large quantity

A simple, generalizable, inexpensive method is demonstrated to synthesize Janus colloidal particles in large quantity. At the liquid-liquid interface of emulsified molten wax and water, untreated particles adsorb and are frozen in place when the wax solidifies. The exposed surfaces of the immobilized particles are modified chemically. Finally, wax is dissolved, and the inner surfaces are modified chemically. Gram-sized quantities or more of Janus particles can be synthesized by taking this approach.     

Production of large quantities of “Janus” nanoparticles using wax-in-water emulsions

For the first time, large amount of Janus silica particles as small as 100 nm in diameter were prepared through a simple method based on the elaboration of Pickering emulsions of wax-in-water. Controlling the kinetic stabilization of wax droplets allows the fabrication of gram-sized quantities of regular asymmetric inorganic particles with high yield. In fact, our method is based on a limited coalescence process, which allows one to predict the quantity of interface which is produced when working with a known mass of wax, and thus to be sure that all introduced silica particles are adsorbed on the wax surface. To this end, the hydrophilic surface of the silica particles was made partially hydrophobic by adsorbing a known amount of surfactant: cetyltrimethylammonium bromide (CTAB). Varying the concentration in surfactant results in tuning the penetration rate of the particles in the wax droplets, leading to various dimension of the modified area. The broken spherical symmetry of the particle surface was thereafter revealed by the selective adsorption of gold nanoparticles on the amino-modified surface.     

Selective surface reactions for Janus ORMOSIL particles with multiple functional groups using an ordered monolayer film at liquid-liquid interface

Monodispersed, submicron-sized Janus ORMOSIL particles with multiple functional groups were prepared by the selective surface reaction of a monolayer film formed at a hexane-water interface. A well-ordered monolayer film was obtained by self-assembly of ORMOSIL particles with multiple functional groups at hexane-water interface. The photopolymerization of an ordered monolayer containing ORMOSIL particles yields a rigid film strong enough to maintain its integrity for transfer and further chemical reaction. The chemical reaction of this ordered film with organic and inorganic functional groups produced Janus ORMOSIL particles with multiple functional groups. The morphologies, structures, and chemical compositions of monolayer films and Janus ORMOSIL particles were characterized by FT-IR, solid state NMR, X-ray diffraction (XRD), optical microscopy (OM), electron microscopies (SEM and TEM), and confocal laser scanning microscopy.     

Janus balance of amphiphilic colloidal particles

We introduce the notion of "Janus balance" (J), defined as the dimensionless ratio of work to transfer an amphiphilic colloidal particle (a "Janus particle") from the oil-water interface into the oil phase, normalized by the work needed to move it into the water phase. The J value can be calculated simply from the interfacial contact angle and the geometry of Janus particles, without the need to know the interfacial energy. It is demonstrated that Janus particles of the same chemical composition but different geometries will have the highest adsorption energy when J = 1. Even for particles of homogeneous chemical makeup, the Janus balance concept can be applied when considering the contact angle hysteresis in desorbing the particle from equilibrium into the water or oil phase. The Janus balance concept may enable predictions of how a Janus particle behaves with respect to efficiency and function as a solid surfactant, as the Janus balance of solid surfactants is the analog of the classical hydrophile-lipophile balance of small surfactant molecules.     

颗粒乳化剂的研究及应用

近年来,颗粒乳化剂因其在食品、采油、化妆品、医药、催化以及功能纳米材料制备等领域具有潜在应用前景而备受关注。本文综述了近来颗粒乳化剂的研究进展,归纳了颗粒乳化剂的种类,包括:无机纳米粒子、表面改性或杂化的无机粒子、有机纳米粒子以及特殊的颗粒乳化剂Janus粒子;并对颗粒乳化剂能够在油水界面稳定吸附的热力学机理和动力学行为进行了阐述,颗粒乳化剂在油水界面接触角以及粒径大小是其在界面稳定吸附的关键参数,而颗粒在油水界面的排布方式则主要受粒子之间相互作用的影响。重点介绍了颗粒乳化剂的热点应用,包括:(1)利用颗粒乳化剂制备Pickering乳液,以及通过对颗粒乳化剂的功能化,使得Pickering乳液具备环境响应性(即pH、盐浓度、温度、紫外光、磁场敏感响应性);(2)以颗粒乳化剂为构筑基元、以Pickering乳液为模板制备Janus颗粒、Colloidosome、具有多级结构的粒子或膜,以及多孔结构材料;(3) Janus粒子在催化领域的应用。     

Janus and ternary particles generated by microfluidic synthesis: design, synthesis, and self-assembly

This paper reports a microfluidic method for fast continuous synthesis of Janus particles and three-phase particles with narrow size distribution. Synthesis of particles included emulsification of monomer liquids and in-situ photoinitiated polymerization of multiphase droplets. We show the strategy for precise control over the structure of Janus particles and their structure-dependent assembly in clusters. We demonstrate an asymmetric chemical modification of the surface of JPs by conjugating them with protein molecules. The Janus and ternary particles were synthesized from largely immiscible liquids and had a sharp interface between the constituent phases.     

Adsorption of paraffin vapor on oxidized molybdenum substrates at nano- and micro-scales

Sputtered oxidized molybdenum surfaces were exposed at room temperature for different times to paraffin vapors obtained at 150 degrees C. Scanning polarization force microscopy (SPFM), optical and confocal microscopy were used to characterize the surfaces. The condensed morphologies are complex and strongly dependent upon the quantity of vapor molecules deposited on the substrate surface. A thin paraffin film is initially formed and quite uniform nano-height drops are nucleated randomly over it within 10-20 s time exposures. Their average contact angle ranged between 1 degrees -2.5 degrees . Further vapor deposition led to a more complex regime where nano-height drops do not show a clear interface with the film, while micro-sized drops do. The tangent approximation method adopted by Salmeron and Xu for the nano-drop regimes was extended to the micro-sized drop regime obtaining an averaged effective contact angle equal to 4 degrees -5 degrees . Both nano-height and micro-sized drops shape and effective contact angles have been discussed taking into account their interactions between the film and the drops.     

Amphiphilic silica nanoparticles at the decane-water interface: insights from atomistic simulations

The properties of 3 nm-diameter silica nanoparticles with different surface chemistry were systematically investigated at the decane-water interface using molecular dynamics simulations. Our results show that the decane-water interfacial tension is not much influenced by the presence of the nanoparticles. The three-phase contact angle increases with nanoparticle surface hydrophobicity. Contact angles observed for the nanoparticles at 300 and at 350 K differ very little. The contact angle of the nanoparticle with randomly dispersed hydrophobic groups is smaller than that observed in Janus nanoparticles of equal overall surface chemistry composition. The energy necessary to desorb Janus nanoparticles from the interface is usually higher than that required to desorb the corresponding homogeneous nanoparticles. Desorption from the interface into the aqueous phase is preferred over that into the organic phase for all except one of the nanoparticles considered. Structural and dynamic properties including nanoparticle rotational relaxation, solvent density profiles, and solvent residence autocorrelation functions near the nanoparticles are also presented. The data are useful for designing Pickering emulsions.     

Evaporation‐Driven Self‐Assembly of Colloidal Silica Dispersion: New Insights on Janus Particles

The evaporation driven self‐assembly of novel colloidal silica Janus particles was evaluated by scanning electron microscopy in comparison to unfunctionalized silica particles. The cyclodextrin‐ and azobenzene‐modified compound was obtained utilizing Pickering emulsion approach, in which the particles were immobilized on solidified wax droplets and subsequently functionalized. Silica particles were modified with 3‐aminopropyl trimethoxysilane and afterward reacted with tosyl‐β‐CD or phenylazo(benzoic acid), respectively. Mesoscopic structures of the colloidal dispersions, as dried films from aqueous solution, have been investigated by scanning electron microscopy and dynamic light scattering. Interestingly, it has been observed that the Janus particles show a significantly different evaporation‐induced assembly than the unmodified particles.     

Contact angles of colloid silica and gold particles at air-water and oil-water interfaces determined with the gel trapping technique

We have used the recently developed gel trapping technique (GTT) to determine the three-phase contact angles of submicrometer silica particles partially coated with octadecyl groups. The particles were spread at air-water and decane-water surfaces, and the aqueous phase was subsequently gelled with a nonadsorbing polysaccharide. The particles trapped at the surface of the aqueous gel were lifted by molding with curable poly(dimethylsiloxane) and imaged with scanning electron microscopy (SEM) to determine the particle contact line diameter which allows their contact angle at the original air-water or oil-water interface to be estimated. We report for the first time the use of the GTT for characterizing the contact angle of individual submicrometer particles adsorbed at liquid interfaces. The SEM images also reveal the structure of the particle monolayer at the interface and the structure of adsorbed particle aggregates. We have also determined the contact angles of agglomerated gold powder microparticles at the air-water and the decane-water interfaces. It was found that agglomerated gold particles demonstrate considerably higher contact angles than those on flat gold-coated surfaces.     

Amphiphilic Janus Gold Nanoparticles Prepared by Interface‐Directed Self‐Assembly: Synthesis and Self‐Assembly

Materials with Janus structures are attractive for wide applications in materials science. Although extensive efforts in the synthesis of Janus particles have been reported, the synthesis of sub‐10 nm Janus nanoparticles is still challenging. Herein, the synthesis of Janus gold nanoparticles (AuNPs) based on interface‐directed self‐assembly is reported. Polystyrene (PS) colloidal particles with AuNPs on the surface were prepared by interface‐directed self‐assembly, and the colloidal particles were used as templates for the synthesis of Janus AuNPs. To prepare colloidal particles, thiol‐terminated polystyrene (PS‐SH) was dissolved in toluene and citrate‐stabilized AuNPs were dispersed in aqueous solution. Upon mixing the two solutions, PS‐SH chains were grafted to the surface of AuNPs and amphiphilic AuNPs were formed at the liquid–liquid interface. PS colloidal particles decorated with AuNPs on the surfaces were prepared by adding the emulsion to excess methanol. On the surface, AuNPs were partially embedded in the colloidal particles. The outer regions of the AuNPs were exposed to the solution and were functionalized through the grafting of atom‐transfer radical polymerization (ATRP) initiator. Poly[2‐(dimethamino)ethyl methacrylate] (PDMAEMA) on AuNPs were prepared by surface‐initiated ATRP. After centrifugation and dissolving the colloidal particles in tetrahydrofuran (THF), Janus AuNPs with PS and PDMAEMA on two hemispheres were obtained. In acidic pH, Janus AuNPs are amphiphilic and are able to emulsify oil droplets in water; in basic pH, the Janus AuNPs are hydrophobic. In mixtures of THF/methanol at a volume ratio of 1:5, the Janus AuNPs self‐assemble into bilayer structures with collapsed PS in the interiors and solvated PDMAEMA at the exteriors of the structures.     

PS colloidal particles stabilized by graphene oxide

Exfoliated graphene oxide (GO) sheets with hydrophilic functional groups on the surface were prepared by the oxidation of graphite. Because of the hydrophilic groups on the sheets and the hydrophobic carbon surface, GO sheets were located at the oil-water interface and could be used as a stabilizer in Pickering emulsions. After the Pickering emulsion polymerization of styrene, PS colloidal particles with GO sheets on the surface were prepared. The size of the GO sheets exerts an important influence on the preparation of PS colloidal particles. Small GO sheets located at the liquid-liquid interface and GO-stabilized PS colloidal particles were prepared; however, for large GO sheets, smaller PS colloidal particles prepared on the GO surface were observed. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were used to characterize the structure and morphology of the colloidal particles. TEM, SEM, and XPS results all suggest the successful preparation of GO-stabilized PS colloidal particles.     

Rotation and alignment of anisotropic particles on nonplanar interfaces

We study the alignment of micron-scale particles at air-water interfaces with unequal principle radii of curvature by optical microscopy. The fluid interface bends to satisfy the wetting conditions at the three phase contact line where the interface intersects the particle, creating deflections that increase the area of the interface. These deflections decay far from the particle. The far field interface shape has differing principle radii of curvature over length scales large compared to the particle. The deflections create excess area which depends on the angle of the particle with respect to the principle axes of the interface. We show that when particles create surface deflections with quadrupolar modes, the particles rotate to preferred orientations to minimize the free energy. In experiment, we focus on uniform surface energy particles, for which quadrupolar modes are forced by the particle shape. Analytical expressions for the torque and stable states are derived in agreement with experiment and confirmed computationally.     

Nanoparticles of varying hydrophobicity at the emulsion droplet-water interface: adsorption and coalescence stability

The coalescence stability of poly(dimethylsiloxane) emulsion droplets in the presence of silica nanoparticles ( approximately 50 nm) of varying contact angles has been investigated. Nanoparticle adsorption isotherms were determined by depletion from solution. The coalescence kinetics (determined under coagulation conditions at high salt concentration) and the physical structure of coalesced droplets were determined from optical microscopy. Fully hydrated silica nanoparticles adsorb with low affinity, reaching a maximum surface coverage that corresponds to a close packed monolayer, based on the effective particle radius and controlled by the salt concentration. Adsorbed layers of hydrophilic nanoparticles introduce a barrier to coalescence of approximately 1 kT, only slightly reduce the coalescence kinetics, and form kinetically unstable networks at high salt concentrations. Chemically hydrophobized silica nanoparticles, over a wide range of contact angles (25 to >90 degrees ), adsorb at the droplet interface with high affinity and to coverages equivalent to close-packed multilayers. Adsorption isotherms are independent of the contact angle, suggesting that hydrophobic attraction overcomes electrostatic repulsion in all cases. The highly structured and rigid adsorbed layers significantly reduce coalescence kinetics: at or above monolayer surface coverage, stable flocculated networks of droplets form and, regardless of their wettability, particles are not detached from the interface during coalescence. At sub-monolayer nanoparticle coverages, limited coalescence is observed and interfacial saturation restricts the droplet size increase. When the nanoparticle interfacial coverage is >0.7 and <1.0, mesophase-like microstructures have been noted, the physical form and stability of which depends on the contact angle. Adsorbed nanoparticle layers at monolayer coverage and composed of a mixture of nanoparticles with different hydrophobisation levels form stable networks of droplets, whereas mixtures of hydrophobized and hydrophilic nanoparticles do not effectively stabilize emulsion droplets.     

Microemulsion-based synthesis of CeO(2) powders with high surface area and high-temperature stabilities

Pure ceria powders, CeO(2), were synthesized in heptane-microemulsified aqueous solutions of CeCl(3) or Ce(NO(3))(3) stabilized by AOT (sodium bis(2-ethylhexyl) sulfosuccinate), DDAB (di-n-didodecyldimethylammonium bromide), or DDAB + Brij 35 surfactant mixtures. Micellar DTAB (n-dodecyltrimethylammonium bromide) and vesicular DDAB systems were also used as media for generating CeO(2). Characterization of the powders by X-ray powder diffractometry, laser-Raman spectroscopy, and Fourier transform infrared spectroscopy revealed that in the presence of surfactants almost-agglomerate-free nanosized crystallites (6-13 nm) of anionic vacancy-free cubic CeO(2) were produced. In the absence of surfactants 21-nm-sized crystallites were formed, comparing with the 85-nm-sized crystallites when cubic CeO(2) was created via thermal decomposition of cerium oxalate. Surface characterization, by X-ray photoelectron spectroscopy, N(2) sorptiometry, and high-resolution electron microscopy showed AOT- or (DDAB + Brij 35)-stabilized microemulsions to assist in formation of crystallites exposing surfaces of large specific areas (up to ca. 250 m(2)/g) but of low stability to high-temperature calcination (28-13 m(2)/g at 800 degrees C). In contrast, the double-chained DDAB was found to generate cubic CeO(2) crystallites of lower initial surface areas (144 (microemulsion) to 125 (vesicles) m(2)/g)) but of higher thermal stability (55-45 m(2)/g at 800 degrees C). Hence, the latter cerias could be considered as appropriate components for total oxidation (combustion) catalysts.     

Investigating the interface of superhydrophobic surfaces in contact with water

Neutron reflectivity (NR) is used to probe the solid, liquid, vapor interface of a porous superhydrophobic (SH) surface submerged in water. A low-temperature, low-pressure technique was used to prepare a rough, highly porous organosilica aerogel-like film. UV/ozone treatments were used to control the surface coverage of hydrophobic organic ligands on the silica framework, allowing the contact angle with water to be continuously varied over the range of 160 degrees (superhydrophobic) to <10 degrees (hydrophilic). NR shows that the superhydrophobic nature of the surface prevents infiltration of water into the porous film. Atomic force microscopy and density functional theory simulations are used in combination to interpret the NR results and help establish the location, width, and nature of the SH film-water interface.     

Facile, solution-based synthesis of soft, nanoscale janus particles with tunable janus balance

We present a novel, versatile, and simple solution-based routine to produce soft, nanosized Janus particles with tunable structural and physical properties at high volume yield. This process is based on the cross-linking of compartments within precisely defined multicompartment micelles (MCMs), which are themselves formed by the self-assembly of ABC triblock terpolymers. Therein, the C blocks form the stabilizing corona emanating from B compartments, which in turn reside on an A core. Cross-linking of the B compartments allows to permanently fixate the phase-separated state and dissolution in a good solvent for all blocks breaks up the MCMs into single Janus particles. They now consist of a core of cross-linked B blocks and two phase-separated hemispheres of A and C. The process gives access to unprecedented structural features such as tunable core diameter and control over the Janus balance ranging from dominant A side to equal hemispheres to dominant C side. We demonstrate that this simple one-pot approach can be extended to a range of triblock terpolymers with different block lengths and block chemistries to furnish a library of tailor-made Janus particles with widely tunable physical properties. Such a diversity and simplicity has remained unreachable with our previously developed approach using the controlled cross-linking of bulk morphologies. We show that this new synthetic route can be upscaled to a high volume yield of 10 wt %, thereby enabling large-scale applications. We further demonstrate the effect of the Janus balance on colloidal self-assembly. Janus particles with a dominant hydrophobic and a small hydrophilic patch aggregate into large clusters in water, but merely di- or trimerize in chloroform.     

Interface modification and characterization of silicon carbide platelets coated with alumina particles

A colloidal-chemistry-based technique was developed for interface modification of silicon carbide platelets (SiCp) by coating with alumina particles. The coating process utilizes electrostatic and/or electrosteric interactions between the particles to promote heterocoagulation. Since an understanding of the chemical interface between the SiCp and alumina is important for improving the coating process, the powders were characterized by the measurement of the electrokinetic sonic amplitude (ESA). The major factors studied were particle size, type of alumina, presence of polyacrylate surfactant, and concentration of alumina in the coating slip. The surface coverage and morphology of the alumina coating on SiCp was determined quantitatively by scanning electron microscopy (SEM). The results indicate that around pH 5.8, the surface charge difference between SiCp and alumina was the largest and the coating of alumina on SiCp was feasible. The SEM data showed that surface coverage was uniform, and the highest surface coverage on SiCp was 66% when the surface area ratio of alumina to SiCp was 250% in the suspension. No significant improvement of the coating rate was observed by the addition of a polyacrylate for dispersion of SiCp. The concentration of alumina in the slip exhibited a strong influence on the amount of surface coverage on SiCp.     

Microparticle sampling by electrowetting-actuated droplet sweeping

This paper describes a new microparticle sampler where particles can be efficiently swept from a solid surface and sampled into a liquid medium using moving droplets actuated by the electrowetting principle. We successfully demonstrate that super hydrophilic (2 microm and 7.9 microm diameter glass beads of about 14 degrees contact angle), intermediate hydrophilic (7.5 microm diameter polystyrene beads of about 70 degrees contact angle), and super hydrophobic (7.9 microm diameter Teflon-coated glass beads and 3 microm size PTFE particles of over 110 degrees contact angles) particles on a solid surface are picked up by electrowetting-actuated moving droplets. For the glass beads as well as the polystyrene beads, the sampling efficiencies are over 93%, in particular over 98% for the 7.9 microm glass beads. For the PTFE particles, however, the sampling efficiency is measured at around 70%, relatively lower than that of the glass and polystyrene beads. This is due mainly to the non-uniformity in particle size and the particle hydrophobicity. In this case, the collected particles staying (adsorbing) on the air-to-water interface hinder the droplet from advancing. This particle sampler requires an extremely small amount of liquid volume (about 500 nanoliters) and will thus be highly compatible and easily integrated with lab-on-a-chip systems for follow-up biological/chemical analyses.