Synthesis of two calix[4]arene diamide derivatives for extraction of chromium(VI)

The synthesis of four diamide derivatives of the p-tert-butylcalix[4]arenes from the reaction of 5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-dihydroxycalix[4]arene 2 with various primary amines were reported. The ¹H and ¹³C NMR, data showed that the synthesized compounds exist in the cone conformation. The complexing properties of these compounds toward Cr₂O₇²⁻/HCr₂O₇⁻ anions are also studied. It has been observed that receptors 5 and 6 are better extractant than the compounds 3 and 4. The protonated alkyl ammonium form of 5 and 6 is an effective extractant for transferring HCr₂O₇⁻/Cr₂O₇²⁻ anions from an aqueous phase into a dichloromethane layer.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

Molybdocalixarene structure control via rim deprotonation. synthesis, characterization, and crystal structures of calix[4]arene Mo(VI) monooxo complexes and calix[4]arene alkali metal/Mo(VI) dioxo complexes

We report a series of calix[4]arene Mo(VI) dioxo complexes M2RC4MoO2 (M = alkali metal, R = H or Bu(t)) that were fully characterized by NMR, X-ray, IR, UV/vis, and elemental analysis. Molybdocalix[4]arene structures can be controlled via lower rim deprotonation, groups at para positions of calix[4]arene, and alkali metal counterions. Mono deprotonation at the lower rim leads to calix[4]arene Mo(VI) monooxo complexes RC4MoO (R = H, Bu(t), or allyl), and full deprotonation gives rise to calix[4]arene Mo(VI) dioxo complexes. Structural studies indicate that HC4 Mo(VI) dioxo complexes easily form polymeric structures via cation-pi interaction and coordination between different calixarene units. However, Bu(t)C4 Mo(VI) dioxo complexes tend to form dimers or tetramers due to steric hindrance of the tert-butyl groups at para positions in calixarene. The structures of the reduced side products A and C were determined by X-ray diffraction studies. The mechanism of RC4MoO formation from the reaction of calixarene monoanions with MoO2Cl2 appears to include the addition of a calixarene -OH group across a Mo=O bond.     

The extraction of thallium(I) and silver(I) ions with 1,3-alternate calix[4]arene derivatives

Tetraallyloxy and tetrabenzyloxy derivatives of calix[4]arenes in cone and 1,3-alternate conformations were synthesised and their capacity to extract thallium(I) and silver(I) ions was investigated. ??Low??-temperature single crystal X-ray structure determinations were recorded for two derivatives in which the calixarene conformation was that of an alternating cone, the aromatic rings lying closely quasi-parallel to the $ \overline{4} $ -axis of the cone. The structure of a tetraallyloxy derivative in the cone conformation was also determined in which a molecule of acetonitrile was included within the calixarene cavity.     

Thermodynamics of sublimation of calix[4]arene complexes with solvent molecules

The inclusion of small neutral organic guests (C₆H₁₄, CH₂Cl₂, CH₃OH) by calix[4]arene receptors was found by ¹H NMR spectroscopy and microanalysis. The studied calix[4]arenes can form stable intramolecular complexes with solvent molecules which keep the stoichiometric composition without changing under conditions of the sublimation experiment. The saturated vapour pressures of calix[4]arenes and complexes of calix[4]arenes with solvent molecules were determinated for the first time by the Knudsen’s effusion method in the wide temperature range. The changing of standard thermodynamic parameters of complexation by transfer process from condensed state to vapour phase was estimated. It was shown that the large flexibility of the calixarene ligand structure corresponds to a strongly negative entropic contribution as well as negative enthalpy term to the Gibbs energy of formation of host–guest complexes in the gas phase.     

Thermodynamics of sublimation of calix[4]arene complexes with solvent molecules

Some calix[4]arenes form complexes with solvent molecules, preserving the stoichiometric composition upon sublimation. The saturated vapor pressures of calix[4]arenes and their complexes with solvents were determined by the Knudsen effusion method in a wide temperature range. The changes in the standard thermodynamic functions of complexation in transfer from the condensed state to the gas phase were determined. It was found that the enthalpy term of the Gibbs energy of the complex formation increases with an increase in the conformational mobility of the ligand, and the entropy term increases as the ligand becomes less flexible and more rigid.     

Spectrophotometric studies of alkali and alkali earth metal ions complexes of mono amino derivative of calix[4]arene

The synthesis and complexive abilities of 5,11,17-tris(tert-butyl)-23 amino-25,26,27,28-tetra-propoxycalix[4]arene towards alkali cations Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺ and alkali earth cations Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ in methanol-chloroform mixture have been evaluated at 25°C, using UV-Vis spectrophotometric techniques. The results showed that the ligand is capable to complex with all the cations by 1: 1 metal to ligand ratios. The selectivity presented considering the calculated formation constants are in the order Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺ and Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ with the ligand.     

Functionalized calix[4]arene as an ionophore: Synthesis,crystal structures and complexation study with Na and K ions

Calix[4]arenes with substituents at three of the four OH groups of the lower rim have been synthesized to investigate their properties as ionophores for Na⁺ and K⁺ metal ions. Crystal structures of these trisubstituted compounds revealed that the calixarene moiety has adopted a partial cone conformation, however the precise shape of the molecule, and intra- and intermolecular interactions, are significantly different due to variations of the substituents. Compound L² encapsulated an acetonitrile molecule in the cavity of the calix moiety, held by C–H?π interactions. In the case of L³, the 2-(2-chloroethoxy)-ethanol substituent is involved in strong intramolecular C–H?π interactions with the centroid of the phenyl rings of the calix, bringing the 2-(2-chloroethoxy)-ethanol moiety inward the calix cone, which prevented the entry of any solvent molecule into the cavity. The complexation properties of L²–L⁴ with Na⁺ and K⁺ ions have been investigated in chloroform–methanol mixture by ¹H NMR and an attempt has been made to isolate these complexes in the solid state. Complexation studies reveal that only L³ forms a complex selectively with K⁺, involving 2-(2-chloroethoxy)-ethanol as a coordinating moiety. The association constant (1.4 × 10⁵ M⁻¹) of the complex has also been determined.     

Effect of conformation on metal ion extraction by calix[4]arene dicarboxylic acids

Synthetic routes to four calix[4]arene stereoisomers with two distal methoxycarboxy groups and two distal butoxy groups are reported. Conformations of cone, partial cone (butyl up), partial cone (acid up), and 1,3-alternate were established by ¹H and ¹³C-NMR spectroscopy. To probe the influence of ligand conformation on metal ion complexation, extractions from aqueous solutions into 1,2-dichloroethane were performed. These included competitive alkali metal cation extractions, competitive alkaline earth metal cation extractions, and single species extractions of Pb²⁺ and of Hg²⁺. Comparisons are also made with the results for a conformationally mobile analogue in which the two butoxy groups are replaced with methoxy groups.     

Fluoride sensing with a PCT-based calix[4]arene

Novel calix[4]arene-based anion sensor 1 with two coumarin units attached via amido functions acting also as binding sites is presented. Complexation of F⁻ by PCT-based 1 causes selectively red-shift in UV-vis absorption and in fluorescence emission due to H-bonding followed by deprotonation of NH-amide groups.     

Preferential recognition of zinc ions through a new anthraquinonoidal calix[4]arene

A novel anthraquinonoidal calix[4]arene derivative was designed and synthesized for the preferential recognition of biologically important zinc in preference to prominently similar cadmium ions and other metal ions via quenching of fluorescence intensity. The stoichiometry of host guest complexation has been determined to be 1:1. The fluorescence changes associated with the recognition event may be attributed to the interaction of zinc ions with the nitrogenous functionality attached at the lower rim of calix[4]arene cavity which allows spatial disposition of the anthraquinonoid segments.     

Ratiometric chemosensing of Mg ions by a calix[4]arene diamide derivative

A new chemosensor with a phenanthroimidazole subunit based upon calix[4]arene-diamide has been synthesized, and its Mg²⁺-selective fluoroionophoric properties were investigated in an aqueous DMSO solution. The compound exhibited a pronounced Mg²⁺-selective fluoroionophoric behavior over other physiologically relevant metal ions. A significant red shift in fluorescence emission (Δλ = 86 nm) provided the ratiometric determination as well as naked-eye detection of Mg²⁺ ions.     

一种新型杯[4]芳烃的合成

本文通过对特丁基杯[4]芳烃的酚羟基烷基化和苯环特丁基位上的IPSO-硝化制备了一系列对硝基杯[4]芳烃烷基醚,烷基分别是n-C~4H~9(3a)、n-C~8H~1~7(3b)、n-C~1~2H~2~5(3c)和n-C~1~6H~3~3(3d)。^1HNMR表明所有新的杯[4]芳烃都具有锥形(cone)构象。     

Organic clays. Synthesis and structure of Na5[calix[4] arene sulfonate] · 12 H2O,K5[calix[4]arene sulfonate]·8 H2O,Rb5[calix[4]arene sulfonate]·5 H2O,and Cs5[calix[4] arene sulfonate] ·4 H2O

The title calixarenes all exist in the solid state as bilayers of anionic calixarenes in the cone configuration. These layers alternate with inorganic regions which contain the cations and the water molecules. The overall structures bear a close resemblance to those found for clay minerals. The sodium salt crystallizes in the triclinic space groupP witha = 10.998(6),b = 13.582(5),c = 14.472(5) Å, = 74.01(3), = 89.09(4), = 86.50(4)°, andZ = 2 forD _calc = 1.72 g cm^–3. Refinement based on 4727 observed reflections led to a conventionalR = 0.050. The potassium salt crystallizes in the triclinic space groupP witha = 11.815(9),b = 13.636(6),c = 14.040(9) Å, = 100.24(5), = 111.86(9), = 95,14(9)°, andZ = 2 forD _calc = 1.77 g cm^–3. Refinement based on 2977 observed reflections led toR = 0.15. The rubidium and cesium salts are isostructural and crystallize in the monoclinic space groupP2₁/n with parameters for Rb[Cs]a = 11.603(5) [11.704(3)],b = 28.607(8) [29.747(9)],c = 12.512(5) [12.604(4)] Å, = 91.70(4) [91.63(2)°], andZ = 4 forD _calc = 2.01 [2.24] g cm^–3. Refinement based on 1750 [4257] observed reflections led toR = 0.108 [0.075]. Disorder of the cations was observed for the rubidium and cesium salts. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82074 (95 pages).     

Complexation of phenols by calix[4]arene Diethers in a low-permittivity solvent. Self-switched complexation by 25,27-Dibenzyloxycalix[4]arene

To improve the selectivity of sensing, the thermodynamics of the complex formation of some calix[4]arene hosts with neutral phenol guests was studied in carbon tetrachloride as nonpolar solvent. The molecular shape of calixarenes was varied by the selective functionalization with tBu and O-CH2-Ph (O-benzyl) or OPr groups at the upper and lower rim, respectively. To vary the electron density on the guest's aromatic rings, the parent phenol was functionalized in the para position with electron-withdrawing Cl, as well as H, and electron-releasing CH3 and tBu groups. To study the interaction between calixarene and the guests, PL and quantum-chemical methods were applied. The results revealed an overall 1:1 complex stoichiometry except for the parent dibenzyloxycalix[4]arene, where 1:2 host-guest stoichiometries were observed irrespective of the quality of phenol. In the latter case, the complex formation shows a self-switched character: the first phenol molecule is included in the calixarene cavity, and only afterward, a second guest molecule is bound by the two benzyloxy aromatics. Although the enthalpy change predicts strong interaction between the host and the guest, the Gibbs free energy change of the complex formation is small, resulting in a relatively low complex stability. The solvent-relaxation measurements support that the unexpected entropy change could be the consequence of the reorientation of solvent molecules around the calixarene building block. The reorientation is assisted by dispersive forces between solute and solvent molecules. IR and RAMAN analysis of the complexes exclude a considerable participation of the phenolic OH group in the stabilization of the complex. This result is in agreement with earlier findings where deterministic role of pi-pi interaction in the complex stability was assumed.     

Potentiometric sensors based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with sulfonated calix[4]arene and calix[4]resorcarenes

Potentiometric ion sensors have been prepared by galvanostatic electrosynthesis of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with p-sulfonated calix[4]arene (C[4]S) and p-methylsulfonated calix[4]resorcarenes (R_n[4]S) with alkyl substituents of different chain length (R₁=CH₃; R₂=C₂H₅; R₃=C₆H₁₃). The bowl-shape of these doping ions makes them suitable as ionic recognition sites, and their bulky character is expected to prevent them from leaching out of the conducting polymer membrane. For comparison, sensors based on PEDOT doped with poly(styrene sulfonate) (PSS) and poly(vinyl sulfonate) (PVS) were also constructed. The resulting GC/PEDOT electrodes were conditioned in 0.01 mol L^–1 AgNO₃ and their performance as Ag⁺ ion-selective electrodes (ISEs) studied. Results reveal that selectivity and lifetime of the electrodes is affected by the doping anion structure, although all electrodes show selectivity towards Ag⁺ ions. Interaction of Ag⁺ with sulfur atoms present in the conducting polymer backbone is considered to be the main reason for this behavior. A second set of electrodes was constructed and conditioned in 0.1 mol L^–1 KCl. These electrodes were tested in chloride solutions of quaternary ammonium cations, showing that C[4]S and R₂[4]S exhibit significant sensitivity towards pyridinium.Dedicated to Professor György Horányi on the occasion of his 70th birthday in recognition of his outstanding contributions to electrochemistry     

Selective extraction of Fe3+ by a polymeric calix[4]arene

A polymeric compound containing more than one calixarene molecule was synthesized by reacting the oligomer ( 2 ) with 25,26,27-tribenzoyloxy-28-hydroxy calix[4]arene. After basic hydrolysis of 3a , the polymeric calixarene ( 3b ) was utilized for selective extraction of some metal cations from aqueous phase to organic phase. It was found that the compound ( 3b ) was selective toward Fe³⁺ from an aqueous solution containing Cu²⁺, Ni²⁺, Co²⁺ and Fe³⁺ cations. The mechanism of the extraction process was discussed. © 1994 John Wiley & Sons, Inc.