Azavinyl azomethine ylides from thermal ring opening of alpha-aziridinohydrazones: unprecedented 1,5-electrocyclization to imidazoles

Michael-type addition of aziridinecarboxylates to 1,2-diaza-1,3-butadienes under solvent-free conditions (SFC) resulted in the formation of alpha-aziridinohydrazone adducts. In toluene under reflux, alpha-aziridinohydrazones gave imidazoles in moderate to good yields. Such a reactivity pattern is explained by 1,5-electrocyclization of azavinyl azomethine ylide generated through thermal ring opening of alpha-aziridinohydrazones.     

Straightforward access to pyrazines, piperazinones, and quinoxalines by reactions of 1,2-diaza-1,3-butadienes with 1,2-diamines under solution, solvent-free, or solid-phase conditions

The preparation of tetrahydropyrazines, dihydropyrazines, pyrazines, piperazinones, and quinoxalines by 1,4-addition of 1,2-diamines to 1,2-diaza-1,3-butadienes bearing carboxylate, carboxamide, or phosphorylated groups at the terminal carbon and subsequent internal heterocyclization is described. The solvent-free reaction of carboxylated 1,2-diaza-1,3-butadienes with the same reagents affords piperazinones, while phosphorylated 1,2-diaza-1,3-butadienes yield phosphorylated pyrazines. The solid-phase reaction of polymer-bound 1,2-diaza-1,3-butadienes with 1,2-diamines produces pyrazines.     

Expeditious synthesis of new 1,2,3-thiadiazoles and 1,2,3-selenadiazoles from 1,2-diaza-1,3-butadienes via Hurd-Mori-type reactions

Alpha-substituted hydrazones obtained from 1,2-diaza-1,3-butadienes and methylenic or methinic activated substrates gave rise to a wide range of cyclic compounds. In particular, in the presence of thionyl chloride as solvent-reagent, they were transformed into 1,2,3-thiadiazoles,(1) with selenium oxychloride in new 4-substituted 2,3-dihydro-1,2,3-selenadiazoles, while with selenium dioxide, they were transformed into 4-substituted 1,2,3-selenadiazoles. We have also examined the nucleophilic behavior of 1,2,3-thiadiazole 4a in the reaction with 1,2-diaza-1,3-butadienes that produced, under basic conditions, 4-hydrazono-1-(1,2,3-thiadiazolyl)pentane derivatives. This event represents an interesting example of stereoselective synthesis because it leads exclusively to the formation of the RR/SS racemic mixture. These latter compounds, treated with thionyl chloride, gave the corresponding 1,3-di-1,2,3-thiadiazolylpropane derivatives, while with sodium methoxide they afforded 1,2,3-thiadiazolyl-2-oxo-2,3-dihydro-1H-pyrrole systems.     

Access to new 2-oxofuro[2,3-b]pyrroles and 2-methylenepyrroles through the reaction of 1,2-diaza-1,3-butadienes and gamma-ketoesters

New and interesting 2-oxofuro[2,3-b]pyrroles and 19-methyl-15-oxa-20-azatricyclo[12.3.3.0(1,14)]icos-18-en-18-carboxylates have been obtained in good yields by the one-pot reaction, in basic medium, of 1,2-diaza-1,3-butadienes with diethyl or dimethyl acetylsuccinate or methyl 2-(1,3-dioxo-2-cyclotetradecyl)acetate, respectively, under mild conditions. Treatment of the same starting materials with diethyl 2-acetylglutarate, in acidic medium, afforded unknown 2-methylenepyrrole derivatives in high yields. Novel 4-(3-oxopropyl)-2,5-dimethyl-1H-pyrrole-3-carboxylates also have been achieved by reacting 1,2-diaza-1,3-butadienes with ethyl or methyl 4-acetyl-5-oxo-hexanoate.     

Straightforward entry into 5-hydroxy-1-aminopyrrolines and the corresponding pyrroles from 1,2-diaza-1,3-butadienes

The synthesis of 5-hydroxy-1-aminopyrroline-3-carboxylic acid derivatives and 5-unsubstituted-1-aminopyrrole-3-carboxylic acid derivatives from 1,2-diaza-1,3-butadienes and aldehydes is presented. These domino reactions offer the advantage of executing multistep transformation without intermediate workup procedures. The stereoselectivity of ring closure to 5-hydroxy-1-aminopyrroline-3-carboxylic acid derivatives and phenyl transposition to 2,3-diphenyl-1-aminopyrrole-3-carboxylic acid derivatives are also studied.     

Solvent-free reaction of some 1,2-diaza-1,3-butadienes with phosphites: environmentally friendly access to new diazaphospholes and E-hydrazonophosphonates

[structures: see text] The present article describes the reaction between 1,2-diaza-1,3-butadienes and trialkyl phosphites, under an atmosphere of nitrogen and under solvent-free conditions, to give alkyl 3,3-dialkoxy-2H-1,2,3lambda5-diazaphosphole-4-carboxylates that, in turn, are converted into corresponding E-hydrazonophosphonates by treatment with THF:water (95:5). These latter compounds are obtained directly by the reaction of 1,2-diaza-1,3-butadienes with trialkyl phosphites in the presence of air. These compounds are useful for the further preparation of dialkyl (5-methyl-3-oxo-2,3-dihydro-1H-4-pyrazolyl)phosphonates and 2-dialkoxyphosphoryl-1,2,3-thiadiazoles.     

Carbon-phosphorus bond formation and transformation in the reaction of 1,2-diaza-1,3-butadienes with alkyl phenylphosphonites

The reaction of 1,2-diaza-1,3-butadienes with dialkyl phenylphosphonites under solvent-free conditions proceeds via zwitterionic intermediate and gives, by precipitation, the stable ylidic α-phosphanylidene-hydrazones that, in turn, can be transformed into the corresponding 3-phenyl-2H-1,2,3λ⁵-diazaphospholes. The latter compounds are converted by hydrolytic cleavage in methanol-water (95:5) into E-hydrazonophosphonates that are useful for the preparation of the corresponding β-ketophosphonates and 4-[alkoxy(phenyl)phosphoryl]-1,2-diaza-1,3-butadienes. These peculiar 1,2-diaza-1,3-butadienes, bearing an alkoxy(phenyl)phosphoryl group on the carbon atom in position 4 are also able to add different nucleophiles, such as methanol or thiourea, giving 2-[alkoxy(phenyl)phosphoryl]-2-methoxyhydrazones and 5-phosphinate-substituted thiazol-4-ones, respectively.     

Reactions of 1,2-diaza-1,3-dienes with thiol derivatives: a versatile construction of nitrogen/sulfur containing heterocycles

The synthesis of substituted 2,3-dihydro-1,4-thiazines, fused cycloalkyl-1,4-thiazines, 1,4-benzothiazines and fused cycloalkyl-1,4-benzothiazines by 1,4-addition of 1,2-aminothiols to 1,2-diaza-1,3-dienes bearing carboxylate, carboxamide, or phosphorylated groups and subsequent internal heterocyclization is described. The reaction of carboxylated 1,2-diaza-1,3-butadienes with 2-(butylamino)ethanethiol affords 1,4-thiazinan-3-ones. The solid-phase reaction of polymer-bound 1,2-diaza-1,3-butadienes with 1,2-aminothiols produces 2,3-dihydro-1,4-thiazines and 1,4-benzothiazines.     

Pyrolysis of 3-hydroxy-2-arylhydrazonoalkanoic acid derivatives

1,2-Diaza-1,3-butadienes have been obtained from readily available 3-hydroxy-2-arylhydrazonopropanoates under various reaction conditions including pyrolysis, dehydration under Mitsunobu conditions or with acetic anhydride or acetic acid. According to their method of synthesis these 1,2-diaza-1,3-butadienes underwent subsequent reactions to give interesting products, and in the presence of proper dienophiles gave the corresponding cycloaddition products. Also, a new approach to pyrazole-3-carboxylic acid derivatives was discovered during an attempt to dehydrate 3-hydroxy-2-arylhydrazonobutanoic esters.     

Regioselective synthesis of spiro-cyclopropanated 1-aminopyrrol-2-ones by Bi(OTf)3-catalyzed one-pot ‘Mukaiyama-Michael addition/cyclization/ring-contraction’ reactions of 1,2-bis(trimethylsilyloxy)cyclobutene with 1,2-diaza-1,3-butadienes

Unknown spiro-cyclopropanated 1-aminopyrrol-2-ones are regioselectively prepared in high yields by Bi(OTf)₃-catalyzed one-pot ‘Mukaiyama-Michael addition/cyclization/ring-contraction’ reactions of 1,2-bis(trimethylsilyloxy)cyclobutene with 1,2-diaza-1,3-butadienes at room temperature.     

Synthesis of new polyazines by 1,4 photochemical or anionic polymerization of 1,2-diaza-1,3-butadienes

Photochemical and anionic polymerizations of 1,2-diaza-1,3-butadienes are described. Photochemical polymerization was smoothly performed by irradiation of some 1-aminocarbonyl-1,2-diaza-1,3-butadienes with high pressure mercury arc (λ = 300 nm) in the presence of allyltributylstannane. Molecular weights (M_w) in the range 14.6-559 × 10² g/mol were obtained. The TGA curve revealed a first weight loss starting at about 200 °C of some 85%, and a second starting at about 300 °C. The DSC showed the glass transition (T_g) at about −34 °C. Anionic polymerization was performed by treatment of some 1-alkoxycarbonyl-1,2-diaza-1,3-butadienes with n-butyllithium. Molecular weights (M_w) in the range 8.44-242 × 10² g/mol were obtained.     

1,2和1,3-缩水内醚糖衍生物的制备, 构象及其糖苷化反应

吡喃糖的1,2-及1,3-缩水内醚苄醚由相应的吡喃糖的C-2氧负离子(对1,3-缩水内醚是C-3氧负离子)与连有氯原子的C-1经分子内关环反应而制备, 而有些吡喃糖的1,2-缩水内醚苄醚是由相应的吡喃糖的C-1氧负离子与连有对甲苯磺酰氧基的C-2经分子内关环(倒关环)反应而得。呋喃糖的1,2-缩水内醚苄醚只能用倒关环法合成。1,2-(或1,3-)缩水内醚糖的开环反应通常给出1,2-反式连接(对1,3缩水内醚是1,3反式连接)的糖苷键。1,2-及1,3-缩水内醚糖的构象分析是通过^1H NMR测定及分子力学计算的方法而完成的。     

Dearomatizing anionic cyclization and novel skeletal rearrangement: high yield formation of multiply substituted bicyclic or polycyclic spirocyclopentadienes and phenanthrene derivatives from 4-aryl 1-lithio-1,3-butadienes

Both 4-phenyl 1-lithio-1,3-butadienes and 4-naphthyl 1-lithio-1,3-butadienes underwent highly efficient and selective intramolecular nucleophilic addition of the butadienyllithium to the aromatic rings, resulting in full dearomatization of the phenyl rings and partial dearomatization of the naphthyl rings. When the reactions were carried out at lower temperatures, ipso intramolecular nucleophilic attack took place exclusively to afford the spirocyclopentadiene derivatives upon hydrolysis or further treatment with a variety of electrophiles. 4-Naphthyl 1-lithio-1,3-butadienes and 4-phenyl 1-lithio-1,3-butadienes were found to proceed in this reaction under similar conditions, with the former being faster even at -78 degrees C. However, when the reaction of 4-naphthyl 1-lithio-1,3-butadienes was carried out at higher temperatures, such as 75 degrees C, an interesting skeletal rearrangement took place to afford the vicinal attack products, tetrasubstituted phenanthrenes, via a dearomatization/rearomatization process. Mechanistic investigation revealed that the kinetically favored ipso attack intermediates might undergo thermal skeletal rearrangement via 1,2-alkyl shift.     

Flexible protocol for the chemo- and regioselective building of pyrroles and pyrazoles by reactions of Danishefsky's dienes with 1,2-diaza-1,3-butadienes

The versatility of the Mukaiyama-Michael-type addition/heterocyclization of Danishefsky's diene with 1,2-diaza-1,3-butadienes was applied to the synthesis of both 4 H-1-aminopyrroles and 4,5 H-pyrazoles. Thus, the same reagents furnished different types of highly functionalized azaheterocycles essentially depending on their structure: as a matter of fact, R1 = COOR or CONR 2 differently affects the acidity of the proton at the adjacent carbon. An unexpected formation of 5 H-1-aminopyrroles from the reactions carried out in water was also observed.     

Toward molecular wire: Synthesis,crystal, molecular,and π-electronic structure of 1,7-bis(aryl)-1,3,5,7-tetraaza-2,4,6-trithia-1,2,5,6-heptatetraenes

The title compounds were obtained by the reaction of 1-aryl-3-trimethylsilyl-1,3-diaza-2-thiaallenes with dichloromonosulfane or 1-aryl-4-(1-phtalimidyl)-1,3-diaza-2,4-dithia-1,2-butadienes in the presence of CsF. The latter route also afforded nonsymmetric derivatives. In contrast, the reaction of N,N,N′,N′-tetrakis(trimethylsilyl)diaminosulfane with S,S-dichloro-N-aryliminosulfuranes (1:2) led to 1,3-bis(aryl)-1,3-diaza-2-thiaallenes and cyclotetra(azathiene). As shown by the X-ray structure analysis, the molecule of the title compound with Ar = Ph is planar, with configuration of the azathiene chain being similar to that of poly(azathiene) (SN)_x. The MNDO calculations indicate that most of the π-MOs of this compound, including the frontier ones, are delocalized throughout the whole molecule. The data obtained confirm the possibility of creating molecular wire for molecular electronic devices on the basis of extended acyclic azathienes. An attempt to synthesize more extended compounds than the title ones resulted in spontaneous shortening of their azathiene chains.     

First preparation and reaction of polymer-bound 1,2-diaza-1,3-butadienes. A convenient entry to 4-triphenylphosphoranylidene-4,5-dihydropyrazol-5-ones

The first general protocol for the preparation of different polymer-bound 1,2-diaza-1,3-butadienes is reported. The utility of these supported reagents in the solid-phase synthesis of 4-triphenylphosphoranylidene-4,5-dihydropyrazol-5-ones by reaction with triphenylphosphine is presented.     

Synergic effect of vicinal stereocenters in [3 + 2] cycloadditions of carbohydrate azadipolarophiles and mesoionic dipoles: origin of diastereofacial selectivity.

The intermolecular [3 + 2] cycloaddition of carbohydrate-derived 1,2-diaza-1,3-butadienes and 1,3-thiazolium-4-olates provides a conceptual basis for the problem of diastereofacial preference in the acyclic series of unsaturated sugars. Experimental results employing a side chain of D-arabino configuration have shown the stereodifferentiation exerted by the first stereogenic center that renders the Re,Re face of the acyclic sugar-chain azadiene eligible for cycloaddition (J. Org. Chem. 2000, 65, 5089). The results of the present work, now utilizing an alternative framework of D-lyxo configuration, evidence the discriminating power of the second stereogenic carbon, which induces the preferential approach to the Re,Si face of the heterocyclic dipole. This scheme of face selectivity is also grounded in theoretical calculations at a semiempirical level. In addition to dihydrothiophenes, which are the expected products of the [3 + 2] cycloaddition, bicyclic systems based on dihydrothieno[2,3-c]piperidine skeleton can also be obtained.     

Heterocycloaddition of thermally generated 1,2-diaza-1,3-butadienes to [60]fullerene

Stable C₆₀-fused tetrahydropyridazine derivatives were synthesized through the hetero-Diels-Alder cycloaddition of C₆₀ with 1,2-diaza-1,3-butadienes, which were generated in situ by the thermal extrusion of sulfur dioxide from 2,5-dihydro-1,2,3-thiadiazole-1,1-dioxides.     

Diastereoselective cycloadditions of 1,3-thiazolium-4-olates with chiral 1,2-diaza-1,3-butadienes

A series of 2-(N-methyl)benzylamino-1,3-thiazolium-4-olates (2-aminothioisomunchnones) react with chiral 1,2-diaza-1,3-butadienes derived from carbohydrates to afford a diastereomeric mixture of (4R,5S)- and (4R,5R)-4,5-dihydrothiophenes. These substrate-controlled cycloadditions are chemoselective, regiospecific, and proceed with a high facial diastereoselection. A theoretical rationale at semiempirical level does justify the stereochemical outcome observed in the experiments.     

Thermal Cyclization of Phenylallenes That Contain ortho‐1,3‐Dioxolan‐2‐yl Groups: New Cascade Reactions Initiated by 1,5‐Hydride Shifts of Acetalic H Atoms

A series of 2‐(1,3‐dioxolan‐2‐yl)phenylallenes that contained a range of substituents (alkyl, aryl, phosphinyl, alkoxycarbonyl, sulfonyl) at the cumulenic C3 position were prepared by using a diverse range of synthetic strategies and converted into their respective 1‐(2‐hydroxy)‐ethoxy‐2‐substituted naphthalenes by smooth thermal activation in toluene solution. Electron‐withdrawing groups at the C3 position accelerated these tandem processes, which consisted of 1) an initial hydride‐like [1,5]‐H shift of the acetalic H atom onto the central cumulene carbon atom; 2) a subsequent 6π‐electrocyclic ring‐closure of the resulting reactive ortho‐xylylenes; and 3) a final aromatization step with concomitant ring‐opening of the 1,3‐dioxolane fragment. If the 1,3‐dioxolane ring of the starting allenes was replaced by a dimethoxymethyl group, the reactions led to mixtures of two disubstituted naphthalenes, which were formed by the migration of either the acetalic H atom or the methoxy group, with the latter migration occurring to a lesser extent. Two of the final 1,2‐disubstituted naphthalenes were converted into their corresponding naphtho‐fused dioxaphosphepine or dioxepinone through an intramolecular transesterification reaction. A DFT computational study accounted for the beneficial influence of the 1,3‐dioxolane fragment on the carbon atom from which the H‐shift took place and also of the electron‐withdrawing substituents on the allene terminus. Remarkably, in the processes that contained a sulfonyl substituent, the conrotatory 6π‐electrocyclization step was of lower activation energy than the alternative disrotatory mode.