钼-二溴邻硝基苯基荧光酮-CTMAB体系的分光光度法研究

研究了 1.2 mol· L-1的盐酸溶液中 ,有 CTMAB存在下 ,钼与 DBON- PF的显色反应。钼与 DBON- PF生成红色络合物 ,最大吸收波长为 540 nm,摩尔吸光系数为 6.2× 10 4 L·mol-1·cm-1。测得络合物的组成比为 Mo( )∶ DBON- PF=1∶ 2。钼量在 0— 2 0 μg/ 2 5m L范围内符合比耳定律。有色络合物稳定 8h以上。该方法用于矿石中微量钼的测定 ,结果令人满意。     

锗-2-羟基-3-甲氧基苯基荧光酮-溴化十六烷基三甲基铵(CTMAB)体系的分光光度法

在阳离子表面活性剂 CTMAB存在下 ,硫酸介质中 ,2 -羟基 - 3-甲氧基苯基荧光酮与 Ge( )显色反应 ,形成红色的络合物 ,其最大吸收波长为 5 0 5 .5 nm,表观摩尔吸光系数为 1.5× 10 5L· mol-1·cm-1,锗量在 0— 13μg/ 2 5 m L范围内符合比耳定律 ,分光光度法测定锗 ,很多离子不干扰测定。方法具有很高的灵敏度 ,直接用于锅炉烟尘中微量锗的测定 ,结果令人满意     

分光光度法测定食品中的锗

在浓度为 1 .2 mol/ L的 HCl介质中 ,苯芴酮与锗反应生成橙红色络合物 ,λmax=5 30 nm,ε=3× 1 0 4 L· mol- 1 · cm- 1 ,锗含量在 0 .5 - 5 0μg/ 5 0 m L范围内符合比尔定律 ,本方法用于食品中锗的测定 ,结果令人满意。     

2-(2-喹啉偶氮)-5-二乙氨基苯胺固相萃取光度法测定痕量钯的研究

根据2-(2-喹啉偶氮)-5-二乙氨基苯胺(QADEAA)与钯的显色反应及MCI-GEL反相固相萃取小柱对显色络合物的固相萃取,建立了一种测定痕量钯的方法。在0.2～2.0 mol·L-1的盐酸介质中,溴化十六烷基三甲胺 (CTMAB) 存在下,QADEAA与钯反应生成2∶1稳定络合物,该络合物可被MCI-GEL 反相固相萃取小柱萃取富集,富集的络合物用丙酮洗脱后用光度法测定,在丙酮介质中体系λ_max＝615 nm,ε＝1.37×105 L·mol-1·cm-1。钯含量在0.01～1.5 mg·L-1内符合比尔定律,方法用于痕量钯的测定,结果令人满意。     

2-(2-喹啉偶氮)-5-二甲氨基苯胺光度法测定铜

在pH=4.0的磷酸盐缓冲介质中,CTMAB存在下,2-(2-喹啉偶氮)-5-二甲氨基苯胺(QADMAA)与铜反应生成2:1稳定络合物,络合物λmax=580nm,ε=1.14×105L·mol-1·cm-1.铜含量在0.01-0.6μg/mL内符合比耳定律,方法用于环境样品中铜的测定,结果令人满意.     

表面活性剂增敏2,4-二氯苯基荧光酮分光光度法测定煤中的微量锗

研究了在表面活性剂存在下,锗与2,4二氯苯基荧光酮(2,4DClPF)的显色条件,在18～25mol·L-1硫酸介质中,锗与2,4DClPF、阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)形成有色三元胶束络合物,其最大吸收波长为516nm,表观摩尔吸光系数ε为138×105L·mol-1·cm-1。方法的线性范围为0～125μg·25mL-1,回收率为103%～106%,相对标准偏差为11%～17%。所拟方法用于煤样中微量锗的测定,结果较满意。     

钨-3,5二溴水杨基荧光酮-CTMAB-Tween80多元配合物的分光光度法研究

在混合表面活性剂溴化十六烷基三甲铵 (CTMAB)和吐温 80 (Tween80 )存在下 ,研究了 3,5 二溴水杨基荧光酮 (DBSAF)与钨 (Ⅵ )显色反应的光度特性。在 0 6 0mol·L-1HCl介质中 ,钨 (Ⅵ )与DBSAF及表面活性剂形成胶束络合物 ,采用混合表面活性剂使增溶增敏作用更为显著 ,络合物表观摩尔吸光系数ε =2 6 4× 10 5L·mol-1·cm-1,λmax =5 2 7nm。用摩尔比法和连续变换法测得钨 (Ⅵ )与DBSAF所形成的络合物化学计量比为 1∶2。钨 (Ⅵ )含量在 0～ 4 0 0 μg·L-1范围服从比尔定律 ,拟定分析方法可直接用于合金钢样品中微量钨的测定     

表面活性剂-苯基荧光酮与钼显色反应的应用

在曲拉通X-100(Triton X-100)存在下,基于Mo(Ⅳ)-苯基荧光酮(PF)的显色反应,建立了分光光度法测定微量钼的新方法.最大吸收波长为625nm,表观摩尔吸光系数为ε=0.598×105 L·mol-1·cm-1,Mo(Ⅳ)含量在0-2 5μg/2 5mL范围内服从比耳定律,线性回归方程为A=0.1824C+0.011,r=0.9991,干扰离子较少.用于地下水和自来水中钼含量的测定,结果令人满意.     

5-H-酸偶氮若丹宁分光光度法测定痕量银的研究

在pH=7.0的NH4Ac缓冲介质中,CTMAB存在下,新试剂5-H-酸偶氮若丹宁(HAR)与银的显色反应生成2∶1紫色稳定络合物,λmax=580nm,ε=1.43×104L·mol-1·cm-1,银含量在0-40μg/25mL范围内符合比耳定律.方法用于定影液、滇池湖水中微量银的测定,结果令人满意.     

微波消化-分光光度法测定铂

在盐酸介质中对氨基苯基亚甲基若丹宁 (ABR)与铂的显色反应 ,生成 2∶ 1稳定络合物 ,λmax=5 2 5 nm,ε=5 .98× 10 4L·mol-1·cm-1。铂含量在 0— 5 0 μg/ 2 5 m L范围内符合比耳定律 ,方法可用于催化剂中铂含量的测定。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.