Preconcentration of indapamide from human urine using molecularly imprinted solid‐phase extraction

A simple, sensitive, and selective molecularly imprinted solid‐phase extraction and spectrophotometric method has been developed for the clean‐up and preconcentration of indapamide from human urine. Molecularly imprinted polymers were prepared by a non‐covalent imprinting approach using indapamide as a template molecule, 2‐(trifluoromethyl) acrylic acid as a functional monomer, ethylene glycol dimethacrylate as a crosslinker, N,N‐azobisisobutyronitrile as a thermal initiator and acetonitrile as a porogenic solvent. A non‐imprinted polymer was also prepared in the same way, but in the absence of template. Molecularly imprinted polymer and non‐imprinted polymer sorbents were dry‐packed into solid‐phase extraction cartridges. Eluates from cartridges were analyzed using a spectrophotometer for the determination of indapamide by referring to the calibration curve in the range 0.14–1.50 μg/mL. Preconcentration factor, limit of detection, and limit of quantification were 16.30, 0.025 μg/mL, and 0.075 μg/mL, respectively. A relatively high imprinting factor (9.3) was also achieved and recovery values for the indapamide spiked into human urine were in the range of 80.1–81.2%. In addition, relatively low within‐day (0.17–0.42%) and between‐day (1.1–1.4%) precision values were obtained as well. The proposed molecularly imprinted solid‐phase extraction and spectrophotometric method was successfully applied to selective extraction, preconcentration, and determination of indapamide from human urine samples.     

Cost‐effective imprinting combining macromolecular crowding and a dummy template for the fast purification of punicalagin from pomegranate husk extract

The combination of molecular crowding and virtual imprinting was employed to develop a cost‐effective method to prepare molecularly imprinted polymers. By using linear polymer polystyrene as a macromolecular crowding agent, an imprinted polymer recognizable to punicalagin had been successfully synthesized with punicalin as the dummy template. The resulting punicalin‐imprinted polymer presented a remarkable selectivity to punicalagin with an imprinting factor of 3.17 even at extremely low consumption of the template (template/monomer ratio of 1:782). In contrast, the imprinted polymer synthesized without crowding agent, did not show any imprinting effect at so low template amount. The imprinted polymers made by combination of molecular crowding and virtual imprinting can be utilized for the fast separation of punicalagin from pomegranate husk extract after optimizing the protocol of solid‐phase extraction with the recovery of 85.3 ± 1.2%.     

Preparation and application of hollow molecularly imprinted polymers with a super‐high selectivity to the template protein

Protein‐imprinted polymers with hollow cores that have a super‐high imprinting factor were prepared by etching the core of the surface‐imprinted polymers that used silica particles as the support. Lysozyme as template was modified onto the surface of silica particles by a covalent method, and after polymerization and the removal of template molecules, channels through the polymer layer were formed, which allowed a single‐protein molecule to come into the hollow core and attach to the binding sites inside the polymer layer. The adsorption experiments demonstrated that the hollow imprinted polymers had an extremely high binding capacity and selectivity, and thus a super‐high imprinting factor was obtained. The as‐prepared imprinted polymers were used to separate the template lysozyme from egg white successfully, indicating its high selectivity and potential application in the field of separation of protein from real samples.     

Chromatographic characteristics of cholesterol-imprinted polymers prepared by covalent and non-covalent imprinting methods

Cholesterol-imprinted polymers were prepared in bulk polymerization by the methods of covalent and non-covalent imprinting. The former involved the use of a template-containing monomer, cholesteryl (4-vinyl)phenyl carbonate, while the latter used the complexes of template and functional monomer, methacrylic acid or 4-vinylpyridine prior to polymerization. Columns packed with these molecularly imprinted polymers (MIPs) were all able to separate cholesterol from other steroids. For different combinations of cholesterol and beta-estradiol concentrations in a total of 1 g/l, the peak retention times for both compounds were nearly constant. The adsorption capacity for cholesterol onto the MIPs was found to significantly depend on the use of functional monomers, but the selectivity factors were only slightly different from each other at 2.9 to 3.2 since the separation was all based on the specific binding of cholesterol to recognition sites formed on the imprinted polymers. The capacity factors for cholesterol were determined to be 3.5, 4.0 and 3.1, respectively, for covalently imprinted, 4-vinylpyridine-based, and methacrylic acid-based non-covalently imprinted polymers. However, the covalently imprinted polymer was found to have a higher adsorption capacity for cholesterol and about fivefold higher chromatographic efficiency for cholesterol separation, in comparison with non-covalently imprinted polymers. The use of covalent imprinting significantly reduced the peak broadening and tailing. This advantage along with constant retention suggests that the covalently imprinted polymer has potential for quantitative analysis.     

Development of a molecularly imprinted solid‐phase extraction sorbent for the selective extraction of telmisartan from human urine

A novel molecularly imprinted solid‐phase extraction with spectrofluorimetry method has been developed for the selective extraction of telmisartan from human urine. Molecularly imprinted polymers were prepared by a noncovalent imprinting approach through UV‐radical polymerization using telmisartan as a template molecule, 2‐dimethylamino ethyl methacrylate as a functional monomer, ethylene glycol dimethacrylate as a cross‐linker, N,N‐azobisisobutyronitrile as an initiator, chloroform as a porogen. Molecularly imprinted polymers and nonimprinted control polymer sorbents were dry‐packed into solid‐phase extraction cartridges, and eluates from cartridges were analyzed using a spectrofluorimeter. Limit of detection and limit of quantitation values were 11.0 and 36.0 ng/mL, respectively. A very high imprinting factor (16.1) was achieved and recovery values for the telmisartan spiked in human urine were in the range of 76.1–79.1%. In addition, relatively low within‐day (0.14–1.6%) and between‐day (0.11–1.31%) precision values were obtained. Valsartan was used to evaluate the selectivity of sorbent as well. As a result, a sensitive, selective, and simple molecularly imprinted solid‐phase extraction with spectrofluorimetry method has been developed and successfully applied to the direct determination telmisartan in human urine.     

Preparation of “dummy” l‐phenylalanine molecularly imprinted microspheres by using ionic liquid as a template and functional monomer

In this study, dummy imprinting technology was employed for the preparation of l‐ phenylalanine‐imprinted microspheres. Ionic liquids were utilized as both a “dummy” template and functional monomer, and 4‐vinylpyridine and ethylene glycol dimethacrylate were used as the assistant monomer and cross‐linker, respectively, for preparing a surface‐imprinted polymer on poly(divinylbenzene) microspheres. By the results obtained by theoretical investigation, the interaction between the template and monomer complex was improved as compared with that between the template and the traditional l‐ phenylalanine‐imprinted polymer. The batch experiments indicated that the imprinting factor reached 2.5. Scatchard analysis demonstrated that the obtained “dummy” molecularly imprinted microspheres exhibited an affinity of 77.4 M·10^?4, significantly higher that of a traditional polymer directly prepared by l‐ phenylalanine, which is in agreement with theoretical results. Competitive adsorption experiments also showed that the molecularly imprinted polymer with the dummy template effectively isolated l‐ phenylalanine from l‐ histidine and l‐ tryptophan with separation factors of 5.68 and 2.68, respectively. All these results demonstrated that the polymerizable ionic liquid as the dummy template could enhance the affinity and selectivity of molecularly imprinted polymer, thereby promoting the development of imprinting technology for biomolecules.     

A molecularly imprinted photonic polymer sensor with high selectivity for tetracyclines analysis in food

A molecularly imprinted photonic polymer (MIPP) sensor for respective detection of tetracycline, oxytetracycline and chlortetracycline is developed based on the combination of a colloidal crystal templating method and a molecular imprinting technique. Colloidal crystal templates are prepared from monodisperse polystyrene colloids. The molecularly imprinted polymer, which is embodied in the colloidal crystal templates, is synthesized with acrylic acid and acrylamide as monomers, N,N'-methylene bisacrylamide as a cross-linker and tetracyclines (TCs) as imprinting template molecules. After removal of the colloidal crystal template and the molecularly imprinted template, the resulted MIPP consists of a three-dimensional, highly ordered and interconnected macroporous array with a thin hydrogel wall, where nanocavities complementary to analytes in shape and binding sites are distributed. The response of MIPP to TCs stimulants in aqueous solution is detected through a readable Bragg diffraction red-shift, which is due to the lattice change of MIPP structures responding to their rebinding to the target TCs molecules. A linear relationship was found between the Δλ and the concentration of TCs in the range from 0.04 μM to 0.24 μM. With this sensory system, direct and selective detection of TCs has been achieved without using label techniques and expensive instruments. The developed method has been applied successfully to detect tetracycline in milk and honey samples.     

Advances in the development of molecularly imprinted polymers for the separation and analysis of proteins with liquid chromatography

This review documents recent advances in the design, synthesis, characterization, and application of molecularly imprinted polymers in the form of monoliths and particles/beads for the use in the separation and analysis of proteins with solid‐phase extraction or liquid chromatography. The merits of three‐dimensional molecular imprinting, whereby the molecular template is randomly embedded in the polymer, and two‐dimensional imprinting, in which the template is confined to the surface, are described. Target protein binding can be achieved by either using the entire protein as a template or by using a protein substructure as template, that is, a peptide, as in the "epitope" approach. The intended approach and strategy then determine the choice of polymerization method. A synopsis has been provided on methods used for the physical, chemical, and functional characterizations and associated performance evaluations of molecularly imprinted and nonimprinted control polymers, involving a diverse range of analytical techniques commonly used for low and high molecular mass analytes. Examples of recent applications demonstrate that, due to the versatility of imprinting methods, molecularly imprinted monoliths or particles/beads can be adapted to protein extraction/depletion and separation procedures relevant to, for example, protein biomarker detection and quantification in biomedical diagnostics and targeted proteomics.     

Synthesis of thermo‐responsive bovine hemoglobin imprinted nanoparticles by combining ionic liquid immobilization with aqueous precipitation polymerization

Surface molecular imprinting over functionalized nanoparticles has proved to be an effective approach for construction of artificial nanomaterials for protein recognition. Herein, we report a strategy for synthesis of core–shell protein‐imprinted nanoparticles by the functionalization of nano‐cores with ionic liquids followed by aqueous precipitation polymerization to build thermo‐responsive imprinted polymer nano‐shells. The immobilized ionic liquids can form multiple interactions with the protein template. The polymerization process can produce thermo‐reversible physical crosslinks, which are advantageous to enhancing imprinting and facilitating template removal. With bovine hemoglobin as a model template, the imprinted nanoparticles showed temperature‐sensitivity in both dispersion behaviors and rebinding capacities. Compared with the ionic‐liquid‐modified core nanoparticles, the imprinted particles exhibited greatly increased selectivity and two orders of magnitude higher binding affinity for the template protein. The imprinted nanoparticles achieved relatively high imprinting factor up to 5.0 and specific rebinding capacity of 67.7 mg/g, respectively. These nanoparticles also demonstrated rapid rebinding kinetics and good reproducibility after five cycles of adsorption–regeneration. Therefore, the presented approach may be viable for the fabrication of high‐performance protein‐imprinted nanoparticles with temperature sensitivity.     

Surface-imprinted polymers in microfluidic devices

Molecularly imprinted polymers are generated by curing a cross-linked polymer in the presence of a template. During the curing process, noncovalent bonds form between the polymer and the template. The interaction sites for the noncovalent bonds become "frozen" in the cross-linking polymer and maintain their shape even after the template is removed. The resulting cavities reproduce the size and shape of the template and can selectively reincorporate the template when a mixture containing it flows over the imprinted surface. In the last few decades the field of molecular imprinting has evolved from being able to selectively capture only small molecules to dealing with all kinds of samples. Molecularly imprinted polymers (MIPs) have been generated for analytes as diverse as metal ions, drug molecules, environmental pollutants, proteins and viruses to entire cells. We review here the relatively new field of surface imprinting, which creates imprints of large, biologically relevant templates. The traditional bulk imprinting, where a template is simply added to a prepolymer before curing, cannot be applied if the analyte is too large to diffuse from the cured polymer. Special methods must be used to generate binding sites only on a surface. Those techniques have solved crucial problems in separation science as well as chemical and biochemical sensing. The implementation of imprinted polymers into microfluidic chips has greatly improved the applicability of microfluidics. We present the latest advances and different approaches of surface imprinting and their applications for microfluidic devices.     

The Rebinding Properties of Bovine Serum Albumin Imprinted Calcium Alginate/Phosphate Hybrid Microspheres Via the Adjustment of pH Values and Salt Concentration

Summary: Bovine serum albumin imprinted calcium phosphate/alginate hydrogel microspheres were prepared with sodium alginate (SA), (NH₄)₂HPO₄, and using CaCl₂ as gelling agent, bovine serum albumin (BSA) as template in inverse suspension. The optimized rebinding properties of BSA imprinted hydrogel microspheres were investigated by controlling pH value and ionic concentration from the viewpoint of adjusting the process of gelling, removing template and rebinding. The optimized pH values for the imprinting of BSA in gelling, removing template and rebinding process was 4.1, 8.3 and 4.8, respectively. The effect of NaCl concentration on the BSA rebinding was also determined. We provided a strategy to get the optimized imprinting efficiency by altering pH value and ionic concentration in a weakly ionic cross-linked hydrogel system on the process of protein's imprinting.     

Molecularly imprinted polymeric stir bar: Preparation and application for the determination of naftopidil in plasma and urine samples

In this study, molecularly imprinting technology and stir bar absorption technology were combined to develop a microextraction approach based on a molecularly imprinted polymeric stir bar. The molecularly imprinted polymer stir bar has a high performance, is specific, economical, and simple to prepare. The obtained naftopidil‐imprinted polymer‐coated bars could simultaneously agitate and adsorb naftopidil in the sample solution. The ratio of template/monomer/cross‐linker and conditions of template removal were optimized to prepare a stir bar with highly efficient adsorption. Fourier transform infrared spectroscopy, scanning electron microscopy, selectivity, and extraction capacity experiments showed that the molecularly imprinted polymer stir bar was prepared successfully. To utilize the molecularly imprinted polymer stir bar for the determination of naftopidil in complex body fluid matrices, the extraction time, stirring speed, eluent, and elution time were optimized. The limits of detection of naftopidil in plasma and urine sample were 7.5 and 4.0 ng/mL, respectively, and the recoveries were in the range of 90–112%. The within‐run precision and between‐run precision were acceptable (relative standard deviation <7%). These data demonstrated that the molecularly imprinted polymeric stir bar based microextraction with high‐performance liquid chromatography was a convenient, rapid, efficient, and specific method for the precise determination of trace naftopidil in clinical analysis.     

硅胶表面扑灭津分子印迹材料的制备及性能表征

以扑灭津为模板分子,在甲苯溶液中经三步反应合成了基于硅胶表面修饰的分子印迹聚合物,并探讨了聚合物制备工艺,验证了聚合物的结构。红外1726cm-1指认印迹膜中的羰基特征峰,元素分析表明印迹材料含碳量18%,N2吸附实验表征印迹膜厚度为0.3nm。应用高效液相色谱-质谱考察了扑灭津和其它3种三嗪农药水溶液中的竞争吸附特性。研究表明:本法制备的表面印迹材料对4种三嗪类农药的吸附均优于参比材料。     

胆酸印迹聚合物的制备及在含水介质中的结合性能

为了在含水介质中进行有效印迹,本研究中以双甲基丙烯酰-β-环糊精（BMA-β-CD）和2-(二乙基胺基)乙基甲基丙烯酸酯(DEAEM)为功能单体制备了胆酸印迹聚合物MIP1,并用平衡结合实验研究了MIP1在含水介质中对模板分子的识别能力。结果表明,MIP1比单独以BMA-β-CD或DEAEM为功能单体制备的印迹聚合物MIP2和MIP3,显示出对模板分子更好的选择性结合能力。MIP1的特异性吸附量ΔCP为38.81μmol/g,印迹因子IF为2.46。研究表明,在含水介质中,利用模板分子与功能单体之间的疏水作用和离子作用是提高印迹聚合物分子识别能力的关键。研究还表明,在识别过程中,疏水作用在驱动分子进入印迹孔穴时起重要作用。     

Synthesis of multidentate functional monomer for ion imprinting

In this work, N,N,N‐tri(2‐carboxyethyl)‐3‐(2‐aminoethylamino)propyl‐trimethoxysilane was prepared as a multidentate functional monomer. The 3D model of the monomer coordinating with Cu²⁺ indicated that the monomer is able to provide five ligating atoms like ethylenediaminetetraacetic acid‐Cu²⁺ to complex with Cu²⁺. When Cu²⁺ was used as a template ion, the synthesis conditions of Cu²⁺‐imprinted polymers were optimized upon orthogonal design. It is interesting to find that Cu²⁺‐imprinted polymer offers a selectivity coefficient of 192.2 when the molar ratio of Cu²⁺ to monomer was exactly 1:1. That means there is no excess ligating atom in the ion‐imprinted polymer and therefore, the nonspecific adsorption could be avoided. Benefiting from the excellent selectivity of Cu²⁺‐imprinted polymer, even if the concentration of Zn²⁺ was 25 times that of Cu²⁺, Cu²⁺‐imprinted polymer still affords a high selectivity coefficient. Finally, the optimal synthesis conditions for Cu²⁺‐imprinted polymer, except the pH, were adopted to prepare Ni²⁺‐imprinted polymer, and Ni²⁺‐imprinted polymer also offered satisfying selectivity to Ni²⁺. That implies this multidentate monomer is adaptable in ion imprinting and, the optimal synthesis conditions of Cu²⁺‐imprinted polymer except pH are likely suitable for the imprinting of other ions besides Cu²⁺.     

HPLC determination of sulfamethazine in milk using surface-imprinted silica synthesized with iniferter technique

A new method for the synthesis of sulfamethazine-imprinted polymer on the surface of silica via quasi-living radical polymerization and the application of the resulting polymer in determination of the SMZ in milk is developed. In the synthesis, initiator-transfer agent-terminator (iniferter) was immobilized on the silica surface using chemical reagents with good availability. The imprinting polymerization was initialized by the silica-supported iniferter under the UV radiation. The molecularly imprinted polymer (MIP) layer grafted on the silica surface was constructed by using sulfamethazine (SMZ) as the template, methacrylic acid (MAA) as the functional monomer and ethylene dimethacrylate (EDMA) as cross-linker. The resulting MIP-silica has good selectivity for SMZ and high column efficiency in the HPLC analysis. The result demonstrated that the SMZ-imprinted polymer was grafted on the silica surface successfully. Under the optimized HPLC condition, the MIP-silica has been used for the determination of SMZ in milk. The method was linear over the concentration range of 0.1-50 microgmL(-1) with correlation coefficient R>0.999. The detection limit for SMZ was 25 ngmL(-1). The recoveries were above 78% at the spiked concentration of 0.024, 0.24 and 0.48 microgmL(-1).     

原位分子印迹法制备的连续棒型模板聚合物的手性识别

使用Ｒ－１－（１－萘基）乙胺为模板分子,α－甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用原位分子印迹分子制备了具有手性识别环境的连续棒型模板聚合物。色谱结果表明,这种连续棒型模板聚合物对模板分子Ｒ－１－（１－萘基）乙胺比对它的对映异构体Ｓ－１－（１－萘基）乙胺及其外消旋体具有更长的保留时间,更大的容量因子,展现了一定的手性识别能力。     

表面印迹聚合物及其在微流控器件中的应用

分子印迹聚合物是通过在模板存在下固化交联的聚合物制备的.在固化过程中,聚合物和模板间形成非共价键.这些非共价结合位点被"冻结"在交联的聚合物中,即使移去模板后也依然维持他们的形状.余下的空穴与模板的尺寸和形状一致,并且可以选择性地从流过的混合物中俘获模板物质.在近几十年中,分子印迹的领域由选择性俘获小分子扩展到处理各种类型的样品.分子印迹聚合物(MIP)被用于分析种类繁多的样品,比如金属离子、药物分子、环境污染物、蛋白、病毒以至整个细胞.本文中我们综述相对较新的领域——表面印迹,这是一种可以用来生成相对较大的生物相关模板的印迹方法.传统的整体印迹法是直接在固化前将模板加入预聚体中,因而不适用于那些大到无法从固化后的聚合物中扩散出来的物质.要仅在表面上生成结合位点,必须要使用特别的方法,由此产生的表面印迹技术解决了分离科学以及化学和生物化学监测的重要问题.将印迹聚合物植入微流控芯片,大大扩展了微流体技术的适用性.本文叙述表面印迹最新的进展以及不同的实施手段,以及它们在微流控器件中的应用.     

Molecular imprinting in alcohols: utility of a pre-polymer based strategy for synthesizing stereoselective artificial receptor polymers in hydrophilic media

Molecular imprinting using a linear pre-polymer bearing carboxylic and 4-vinylbenzyl residues was performed in alcohols for synthesizing stereoselective polymer receptors. Chromatographic assessment of the imprinted polymers, which are obtained by cross-linking the pre-polymer in the presence of a model template (−)-cinchonidine, showed the induction of affinity and selectivity to the template species by the imprinting procedure. Comparison with the performance of an imprinted polymer prepared with a monomer mixture instead of the pre-polymer elucidated the efficacy of the linear pre-polymer for molecular imprinting in the protic solvents.     

分子烙印聚合物作为高效毛细管电泳添加剂的研究

分子洛印聚合物（molecular imprinted polymer)是一种高选择的有分子记忆效应的主体分子,通常在非极性环境中制备和应用。该文在极性溶剂中利用离子化作用和疏水作用制备了非共价的分子烙印聚合物,并将其作为高效毛细管电泳流动相添加剂;在含水缓冲溶液条件下,研究了单体种类、分子烙印聚合物颗粒度和含量、缓冲溶液pH值以及分离电压对分子烙印聚合物识别模板分子的影响。结果证明了在质子溶剂中制备和应用非共价分子烙印聚合物是可行的。