SrO-layer insertion in Ruddlesden–Popper Sn-based perovskite enables efficient CO2 electroreduction towards formate

Tin (Sn)-based oxides have been proved to be promising catalysts for the electrochemical CO₂ reduction reaction (CO₂RR) to formate (HCOO⁻). However, their performance is limited by their reductive transformation into metallic derivatives during the cathodic reaction. This paper describes the catalytic chemistry of a Sr₂SnO₄ electrocatalyst with a Ruddlesden–Popper (RP) perovskite structure for the CO₂RR. The Sr₂SnO₄ electrocatalyst exhibits a faradaic efficiency of 83.7% for HCOO⁻ at −1.08 V vs. the reversible hydrogen electrode with stability for over 24 h. The insertion of the SrO-layer in the RP structure of Sr₂SnO₄ leads to a change in the filling status of the anti-bonding orbitals of the Sn active sites, which optimizes the binding energy of *OCHO and results in high selectivity for HCOO⁻. At the same time, the interlayer interaction between interfacial octahedral layers and the SrO-layers makes the crystalline structure stable during the CO₂RR. This study would provide fundamental guidelines for the exploration of perovskite-based electrocatalysts to achieve consistently high selectivity in the CO₂RR.

This paper describes how the insertion of a SrO-layer in Ruddlesden–Popper Sr₂SnO₄ perovskite electrocatalysts promotes CO₂ reduction towards formate via *OCHO intermediate. A faradaic efficiency of 83.7% and stability for over 24 h were obtained.     

Inverse potential scaling in co-electrocatalytic activity for CO2 reduction through redox mediator tuning and catalyst design

Electrocatalytic CO₂ reduction is an attractive strategy to mitigate the continuous rise in atmospheric CO₂ concentrations and generate value-added chemical products. A possible strategy to increase the activity of molecular systems for these reactions is the co-catalytic use of redox mediators (RMs), which direct reducing equivalents from the electrode surface to the active site. Recently, we demonstrated that a sulfone-based RM could trigger co-electrocatalytic CO₂ reduction via an inner-sphere mechanism under aprotic conditions. Here, we provide support for inner-sphere cooperativity under protic conditions by synthetically modulating the mediator to increase activity at lower overpotentials (inverse potential scaling). Furthermore, we show that both the intrinsic and co-catalytic performance of the Cr-centered catalyst can be enhanced by ligand design. By tuning both the Cr-centered catalyst and RM appropriately, an optimized co-electrocatalytic system with quantitative selectivity for CO at an overpotential (η) of 280 mV and turnover frequency (TOF) of 194 s⁻¹ is obtained, representing a three-fold increase in co-catalytic activity at 130 mV lower overpotential than our original report. Importantly, this work lays the foundation of a powerful tool for developing co-catalytic systems for homogeneous electrochemical reactions.

The use of sulfone-based redox mediators in electrocatalytic CO₂ reduction by Cr-centered complexes enhances the turnover frequencies at lower overpotentials via inner-sphere electron transfer and pancake bonding.     

Why heterogeneous single-atom catalysts preferentially produce CO in the electrochemical CO2 reduction reaction

Formate and CO are competing products in the two-electron CO₂ reduction reaction (2e CO₂RR), and they are produced via *OCHO and *COOH intermediates, respectively. However, the factors governing CO/formate selectivity remain elusive, especially for metal–carbon–nitrogen (M–N–C) single-atom catalysts (SACs), most of which produce CO as their main product. Herein, we show computationally that the selectivity of M–N–C SACs is intrinsically associated with the CO₂ adsorption mode by using bismuth (Bi) nanosheets and the Bi–N–C SAC as model catalysts. According to our results, the Bi–N–C SAC exhibits a strong thermodynamic preference toward *OCHO, but under working potentials, CO₂ is preferentially chemisorbed first due to a charge accumulation effect, and subsequent protonation of chemisorbed CO₂ to *COOH is kinetically much more favorable than formation of *OCHO. Consequently, the Bi–N–C SAC preferentially produces CO rather than formate. In contrast, the physisorption preference of CO₂ on Bi nanosheets contributes to high formate selectivity. Remarkably, this CO₂ adsorption-based mechanism also applies to other typical M–N–C SACs. This work not only resolves a long-standing puzzle in M–N–C SACs, but also presents simple, solid criteria (i.e., CO₂ adsorption modes) for indicating CO/formate selectivity, which help strategic development of high-performance CO₂RR catalysts.

This report discloses a nontrivial role of the CO₂ adsorption mode in governing the CO/formate selectivity of single-atom catalysts towards two-electron CO₂ reduction.     

Polyoxometalate-based electron transfer modulation for efficient electrocatalytic carbon dioxide reduction

The electrocatalytic carbon dioxide (CO₂) reduction reaction (CO₂RR) involves a variety of electron transfer pathways, resulting in poor reaction selectivity, limiting its use to meet future energy requirements. Polyoxometalates (POMs) can both store and release multiple electrons in the electrochemical process, and this is expected to be an ideal “electron switch” to match with catalytically active species, realize electron transfer modulation and promote the activity and selectivity of the electrocatalytic CO₂RR. Herein, we report a series of new POM-based manganese-carbonyl (MnL) composite CO₂ reduction electrocatalysts, whereby SiW₁₂–MnL exhibits the most remarkable activity and selectivity for CO₂RR to CO, resulting in an increase in the faradaic efficiency (FE) from 65% (MnL) to a record-value of 95% in aqueous electrolyte. A series of control electrochemical experiments, photoluminescence spectroscopy (PL), transient photovoltage (TPV) experiments, and density functional theory (DFT) calculations revealed that POMs act as electronic regulators to control the electron transfer process from POM to MnL units during the electrochemical reaction, enhancing the selectivity of the CO₂RR to CO and depressing the competitive hydrogen evolution reaction (HER). This work demonstrates the significance of electron transfer modulation in the CO₂RR and suggests a new idea for the design of efficient electrocatalysts towards CO₂RR.

Polyoxometalates as electron regulators to promote the carbonyl manganese (MnL) electrocatalyst for highly efficient CO₂ reduction in aqueous electrolyte.     

The spatial distribution of cobalt phthalocyanine and copper nanocubes controls the selectivity towards C2 products in tandem electrocatalytic CO2 reduction

The coupling of CO-generating molecular catalysts with copper electrodes in tandem schemes is a promising strategy to boost the formation of multi-carbon products in the electrocatalytic reduction of CO₂. While the spatial distribution of the two components is important, this aspect remains underexplored for molecular-based tandem systems. Herein, we address this knowledge gap by studying tandem catalysts comprising Co-phthalocyanine (CoPc) and Cu nanocubes (Cu_cub). In particular, we identify the importance of the relative spatial distribution of the two components on the performance of the tandem catalyst by preparing CoPc-Cu_cub/C, wherein the CoPc and Cu_cub share an interface, and CoPc-C/Cu_cub, wherein the CoPc is loaded first on carbon black (C) before mixing with the Cu_cub. The electrocatalytic measurements of these two catalysts show that the faradaic efficiency towards C₂ products almost doubles for the CoPc-Cu_cub/C, whereas it decreases by half for the CoPc-C/Cu_cub, compared to the Cu_cub/C. Our results highlight the importance of a direct contact between the CO-generating molecular catalyst and the Cu to promote C–C coupling, which hints at a surface transport mechanism of the CO intermediate between the two components of the tandem catalyst instead of a transfer via CO diffusion in the electrolyte followed by re-adsorption.

This work highlights the importance of a direct contact between the CO-generating molecular catalyst and the Cu catalyst to promote C–C coupling in tandem electrocatalytic CO₂ reduction.     

Comparing interfacial cation hydration at catalytic active sites and spectator sites on gold electrodes: understanding structure sensitive CO2 reduction kinetics

Hydrated cations present in the electrochemical double layer (EDL) are known to play a crucial role in electrocatalytic CO₂ reduction (CO₂R), and numerous studies have attempted to explain how the cation effect contributes to the complex CO₂R mechanism. CO₂R is a structure sensitive reaction, indicating that a small fraction of total surface sites may account for the majority of catalytic turnover. Despite intense interest in specific cation effects, probing site-specific, cation-dependent solvation structures remains a significant challenge. In this work, CO adsorbed on Au is used as a vibrational Stark reporter to indirectly probe solvation structure using vibrational sum frequency generation (VSFG) spectroscopy. Two modes corresponding to atop adsorption of CO are observed with unique frequency shifts and potential-dependent intensity profiles, corresponding to direct adsorption of CO to inactive surface sites, and in situ generated CO produced at catalytic active sites. Analysis of the cation-dependent Stark tuning slopes for each of these species provides estimates of the hydrated cation radius upon adsorption to active and inactive sites on the Au electrode. While cations are found to retain their bulk hydration shell upon adsorption at inactive sites, catalytic active sites are characterized by a single layer of water between the Au surface and the electrolyte cation. We propose that the drastic increase in catalytic performance at active sites stems from this unique solvation structure at the Au/electrolyte interface. Building on this evidence of a site-specific EDL structure will be critical to understand the connection between cation-dependent interfacial solvation and CO₂R performance.

Site-specific vibrational probes were used to elucidate the interfacial solvation structure between catalytic active sites and inactive sites on a Au electrode to reveal a unique, opposing cation-dependent double layer structure at active sites.     

Preparation of trimetallic electrocatalysts by one-step co-electrodeposition and efficient CO2 reduction to ethylene

Use of multi-metallic catalysts to enhance reactions is an interesting research area, which has attracted much attention. In this work, we carried out the first work to prepare trimetallic electrocatalysts by a one-step co-electrodeposition process. A series of Cu–X–Y (X and Y denote different metals) catalysts were fabricated using this method. It was found that Cu₁₀La₁Cs₁ (the content ratio of Cu²⁺, La³⁺, and Cs⁺ in the electrolyte is 10 : 1 : 1 in the deposition process), which had an elemental composition of Cu₁₀La_0.16Cs_0.14 in the catalyst, formed a composite structure on three dimensional (3D) carbon paper (CP), which showed outstanding performance for CO₂ electroreduction reaction (CO₂RR) to produce ethylene (C₂H₄). The faradaic efficiency (FE) of C₂H₄ could reach 56.9% with a current density of 37.4 mA cm⁻² in an H-type cell, and the partial current density of C₂H₄ was among the highest ones up to date, including those over the catalysts consisting of Cu and noble metals. Moreover, the FE of C₂₊ products (C₂H₄, ethanol, and propanol) over the Cu₁₀La₁Cs₁ catalyst in a flow cell reached 70.5% with a high current density of 486 mA cm⁻². Experimental and theoretical studies suggested that the doping of La and Cs into Cu could efficiently enhance the reaction efficiency via a combination of different effects, such as defects, change of electronic structure, and enhanced charge transfer rate. This work provides a simple method to prepare multi-metallic catalysts and demonstrates a successful example for highly efficient CO₂RR using non-noble metals.

Trimetallic Cu₁₀La₁Cs₁ catalysts prepared via a one-step co-electrodeposition strategy can act as a robust electrocatalyst for CO₂RR to C₂H₄.     

Heterogeneous electron transfer reorganization energy at the inner Helmholtz plane in a polybromide redox-active ionic liquid

In ionic liquids (ILs), the electric double layer (EDL) is where heterogeneous electron transfer (ET) occurs. Nevertheless, the relationship between the EDL structure and its kinetics has been rarely studied, especially for ET taking place in the inner Helmholtz plane (IHP). This is largely because of the lack of an appropriate model system for experiments. In this work, we determined the reorganization energy (λ) of Br₂ reduction in a redox-active IL 1-ethyl-1-methylpyrrolidinium polybromide (MEPBr_2n+1) based on the Marcus–Hush–Chidsey model. Exceptionally fast mass transport of Br₂ in MEPBr_2n+1 allows voltammograms to be obtained in which the current plateau is regulated by electron-transfer kinetics. This enables investigation of the microscopic environment in the IHP of the IL affecting electrocatalytic reactions through reorganization energy. As a demonstration, TiO₂-modified Pt was employed to show pH-dependent reorganization energy, which suggests the switch of major ions at the IHP as a function of surface charges of electrodes.

Ultrafast transport of Br₂ in a polybromide redox-active ionic liquid allows electron transfer-limited voltammograms of Br₂ reduction. The reorganization energy at the inner-Helmholtz plane can be determined based on the Marcus–Hush–Chidsey model.     

Electrocatalytic NAD+ reduction via hydrogen atom-coupled electron transfer

Nicotinamide adenine dinucleotide cofactor (NAD(P)H) is regarded as an important energy carrier and charge transfer mediator. Enzyme-catalyzed NADPH production in natural photosynthesis proceeds via a hydride transfer mechanism. Selective and effective regeneration of NAD(P)H from its oxidized form by artificial catalysts remains challenging due to the formation of byproducts. Herein, electrocatalytic NADH regeneration and the reaction mechanism on metal and carbon electrodes are studied. We find that the selectivity of bioactive 1,4-NADH is relatively high on Cu, Fe, and Co electrodes without forming commonly reported NAD₂ byproducts. In contrast, more NAD₂ side product is formed with the carbon electrode. ADP-ribose is confirmed to be a side product caused by the fragmentation reaction of NAD⁺. Based on H/D isotope effects and electron paramagnetic resonance analysis, it is proposed that the formation of NADH on these metal electrodes proceeds via a hydrogen atom-coupled electron transfer (H_adCET) mechanism, in contrast to the direct electron-transfer and NAD˙ radical pathway on carbon electrodes, which leads to more by-product, NAD₂. This work sheds light on the mechanism of electrocatalytic NADH regeneration, which is different from biocatalysis.

A hydrogen atom coupled with electron transfer (H_adCET) mechanism is proposed for electrocatalytic NAD⁺ reduction on metal electrodes (Cu, Fe and Co), in contrast to the NAD˙ radical pathway on carbon electrodes.     

Understanding the mechanism of direct visible-light-activated [2 + 2] cycloadditions mediated by Rh and Ir photocatalysts: combined computational and spectroscopic studies

The mechanism of [2 + 2] cycloadditions activated by visible light and catalyzed by bis-cyclometalated Rh(iii) and Ir(iii) photocatalysts was investigated, combining density functional theory calculations and spectroscopic techniques. Experimental observations show that the Rh-based photocatalyst produces excellent yield and enantioselectivity whereas the Ir-photocatalyst yields racemates. Two different mechanistic features were found to compete with each other, namely the direct photoactivation of the catalyst–substrate complex and outer-sphere triplet energy transfer. Our integrated analysis suggests that the direct photocatalysis is the inner working of the Rh-catalyzed reaction, whereas the Ir catalyst serves as a triplet sensitizer that activates cycloaddition via an outer-sphere triplet excited state energy transfer mechanism.

The mechanism of [2 + 2] cycloadditions activated by visible light and catalyzed by bis-cyclometalated Rh(iii) and Ir(iii) photocatalysts was investigated, combining density functional theory calculations and spectroscopic techniques.     

Photochemistry of pyruvic acid is governed by photo-induced intermolecular electron transfer through hydrogen bonds

Despite more than 85 years of research, the mechanism behind the photodecarboxylation of pyruvic acid remains elusive. Most studies focused on the gas and liquid phase of diluted solutions of pyruvic acid to understand the impact of sun light on the degradation of this molecule in the atmosphere. By analyzing concentrated supercooled solutions at 77 K, we demonstrate that instead of decarboxylating, the pyruvic acid molecule plays the role of electron donor and transfers an electron to an acceptor molecule that subsequently degrades to form CO₂. We show that this electron transfer occurs via hydrogen bonding and that in aqueous solutions of pyruvic acid, the hydrated form is the electron acceptor. These findings demonstrate that photo-induced electron transfer via hydrogen bonding can occur between two simple carboxylic acids and that this mechanism governs the photochemistry of pyruvic acid, providing unexplored alternative pathways for the decarboxylation of photo-inactive molecules.

When supercooled pyruvic acid is photo-irradiated, a radical detectable by ESR forms following the transfer of an electron from a molecule in its keto form to a molecule in its hydrated form. The latter subsequently degrades to CO₂ and acetic acid.     

Unexpected high selectivity for acetate formation from CO2 reduction with copper based 2D hybrid catalysts at ultralow potentials

Copper-based catalysts are efficient for CO₂ reduction affording commodity chemicals. However, Cu(i) active species are easily reduced to Cu(0) during the CO₂RR, leading to a rapid decay of catalytic performance. Herein, we report a hybrid-catalyst that firmly anchors 2D-Cu metallic dots on F-doped Cu_xO nanoplates (Cu_xOF), synthesized by electrochemical-transformation under the same conditions as the targeted CO₂RR. The as-prepared Cu/Cu_xOF hybrid showed unusual catalytic activity towards the CO₂RR for CH₃COO⁻ generation, with a high FE of 27% at extremely low potentials. The combined experimental and theoretical results show that nanoscale hybridization engenders an effective s,p-d coupling in Cu/Cu_xOF, raising the d-band center of Cu and thus enhancing electroactivity and selectivity for the acetate formation. This work highlights the use of electronic interactions to bias a hybrid catalyst towards a particular pathway, which is critical for tuning the activity and selectivity of copper-based catalysts for the CO₂RR.

A two-dimensional (2D) copper hybrid catalyst (Cu/Cu_xOF) composed of metallic Cu well dispersed on 2D F-doped Cu_xO nanoplates (Cu_xOF) is reported, which shows high catalytic activity toward the CO₂RR for acetate generation.     

Cu cluster embedded porous nanofibers for high-performance CO2 electroreduction

Metal-doped carbon materials, as one of the most important electrocatalytic catalysts for CO₂ reduction reaction (CO₂RR), have attracted increasing attention. Herein, a series of Cu cluster embedded highly porous nanofibers have been prepared through the carbonization of electro-spun MOF/PAN nanofibers. The obtained Cu cluster doped porous nanofibers possessed fibrous morphology, high porosity, conductivity, and uniformly dispersed Cu clusters, which could be applied as promising CO₂RR catalysts. Specifically, best of them, MCP-500 exhibited high catalytic performance for CO₂RR, in which the Faradaic efficiency of CO (FE_CO) was as high as 98% at ?0.8 V and maintained above 95% after 10 h continuous electrocatalysis. The high performance might be attributed to the synergistic effect of tremendously layered graphene skeleton and uniformly dispersed Cu clusters that could largely promote the electron conductivity, mass transfer and catalytic activity during the electrocatalytic CO₂RR process. This attempt will provide a new idea to design highly active CO₂RR electrocatalyst.     

Elucidating the structure-dependent selectivity of CuZn towards methane and ethanol in CO2 electroreduction using tailored Cu/ZnO precatalysts

Understanding the catalyst compositional and structural features that control selectivity is of uttermost importance to target desired products in chemical reactions. In this joint experimental–computational work, we leverage tailored Cu/ZnO precatalysts as a material platform to identify the intrinsic features of methane-producing and ethanol-producing CuZn catalysts in the electrochemical CO₂ reduction reaction (CO₂RR). Specifically, we find that Cu@ZnO nanocrystals, where a central Cu domain is decorated with ZnO domains, and ZnO@Cu nanocrystals, where a central ZnO domain is decorated with Cu domains, evolve into Cu@CuZn core@shell catalysts that are selective for methane (∼52%) and ethanol (∼39%), respectively. Operando X-ray absorption spectroscopy and various microscopy methods evidence that a higher degree of surface alloying along with a higher concentration of metallic Zn improve the ethanol selectivity. Density functional theory explains that the combination of electronic and tandem effects accounts for such selectivity. These findings mark a step ahead towards understanding structure–property relationships in bimetallic catalysts for the CO₂RR and their rational tuning to increase selectivity towards target products, especially alcohols.

A higher degree of surface alloying and Zn concentration boosts the selectivity towards ethanol of CuZn catalysts in CO₂ electroreduction.     

The effect of specific adsorption of halide ions on electrochemical CO2 reduction

In the electrochemical CO₂ reduction reaction (CO₂RR), halide ions could impose a significant effect on multi-carbon (C₂₊) product production for Cu-based catalysts by a combined contribution from various mechanisms. However, the nature of specific adsorption of halide ions remains elusive due to the difficulty in decoupling different effects. This paper describes a facile method to actively immobilize the morphology of Cu-based catalysts during the CO₂RR, which makes it possible to reveal the fundamental mechanism of specific adsorption of halide ions. A stable morphology is obtained by pre-reduction in aqueous KX (X = Cl, Br, I) electrolytes followed by conducting the CO₂RR using non-buffered and non-specifically adsorbed K₂SO₄ as the supporting electrolyte, by which the change of local pH and cation concentration is also maintained during the CO₂RR. In situ spectroscopy revealed that the specific adsorption of halide ions enhances the adsorption of *CO intermediates, which enables a high selectivity of 84.5% for C₂₊ products in 1.0 M KI.

Reconstruction of catalyst morphology induced by halide ions over of Cu-based catalysts during CO₂ electroreduction is suppressed using K₂SO₄ as supporting electrolyte. Adsorption of halide ions is an enabling factor to enhance CO₂ electroreduction.     

The in situ study of surface species and structures of oxide-derived copper catalysts for electrochemical CO2 reduction

Oxide-derived copper (OD-Cu) has been discovered to be an effective catalyst for the electroreduction of CO₂ to C2+ products. The structure of OD-Cu and its surface species during the reaction process are interesting topics, which have not yet been clearly discussed. Herein, in situ surface-enhanced Raman spectroscopy (SERS), operando X-ray absorption spectroscopy (XAS), and ¹⁸O isotope labeling experiments were employed to investigate the surface species and structures of OD-Cu catalysts during CO₂ electroreduction. It was found that the OD-Cu catalysts were reduced to metallic Cu(0) in the reaction. CuO_x species existed on the catalyst surfaces during the CO₂RR, which resulted from the adsorption of preliminary intermediates (such as *CO₂ and *OCO⁻) on Cu instead of on the active sites of the catalyst. It was also found that abundant interfaces can be produced on OD-Cu, which can provide heterogeneous CO adsorption sites (strong binding sites and weak binding sites), leading to outstanding performance for obtaining C2+ products. The Faradaic efficiency (FE) for C2+ products reached as high as 83.8% with a current density of 341.5 mA cm⁻² at −0.9 V vs. RHE.

CuO_x species were shown to exist on OD-Cu during the CO₂RR, which resulted from the adsorption of preliminary intermediates (such as *CO₂ and *OCO⁻) on Cu instead of on the active sites of the catalyst.     

Activation of MoS2 monolayer electrocatalysts via reduction and phase control in molten sodium for selective hydrogenation of nitrogen to ammonia

Electrochemical nitrogen fixation under ambient conditions is promising for sustainable ammonia production but is hampered by high reaction barrier and strong competition from hydrogen evolution, leading to low specificity and faradaic efficiency with existing catalysts. Here we describe the activation of MoS₂ in molten sodium that leads to simultaneous formation of a sulfur vacancy-rich heterostructured 1T/2H-MoS_x monolayer via reduction and phase transformation. The resultant catalyst exhibits intrinsic activities for electrocatalytic N₂-to-NH₃ conversion, delivering a faradaic efficiency of 20.5% and an average NH₃ rate of 93.2 μg h⁻¹ mg_cat⁻¹. The interfacial heterojunctions with sulfur vacancies function synergistically to increase electron localization for locking up nitrogen and suppressing proton recombination. The 1T phase facilitates H–OH dissociation, with S serving as H-shuttling sites and to stabilize . The subsequently couple with nearby N₂ and NH_x intermediates bound at Mo sites, thus greatly promoting the activity of the catalyst. First-principles calculations revealed that the heterojunction with sulfur vacancies effectively lowered the energy barrier in the potential-determining step for nitrogen reduction, and, in combination with operando spectroscopic analysis, validated the associative electrochemical nitrogen reduction pathway. This work provides new insights on manipulating chalcogenide vacancies and phase junctions for preparing monolayered MoS₂ with unique catalytic properties.

We describe the activation of MoS₂ in molten sodium that leads to the simultaneous formation of a sulfur vacancy-rich heterostructured 1T/2H-MoS_x monolayer electrocatalyst via reduction and phase transformation.     

High-yield production of liquid fuels in CO2 hydrogenation on a zeolite-free Fe-based catalyst

Catalytic conversion of CO₂ to long-chain hydrocarbons with high activity and selectivity is appealing but hugely challenging. For conventional bifunctional catalysts with zeolite, poor coordination among catalytic activity, CO selectivity and target product selectivity often limit the long-chain hydrocarbon yield. Herein, we constructed a singly cobalt-modified iron-based catalyst achieving 57.8% C₅₊ selectivity at a CO₂ conversion of 50.2%. The C₅₊ yield reaches 26.7%, which is a record-breaking value. Co promotes the reduction and strengthens the interaction between raw CO₂ molecules and iron species. In addition to the carbide mechanism path, the existence of Co₃Fe₇ sites can also provide sufficient O-containing intermediate species (CO*, HCOO*, CO₃²*, and ) for subsequent chain propagation reaction via the oxygenate mechanism path. Reinforced cascade reactions between the reverse water gas shift (RWGS) reaction and chain propagation are achieved. The improved catalytic performance indicates that the KZFe–5.0Co catalyst could be an ideal candidate for industrial CO₂ hydrogenation catalysts in the future.

CO₂/H₂ mixtures can be directly converted into long-chain hydrocarbons with a yield of 26.7% over a bimetallic FeCo catalyst via strengthening the reinforced chain growth reaction.     

Circumventing the scaling relationship on bimetallic monolayer electrocatalysts for selective CO2 reduction

Electrochemical conversion of CO₂ into value-added chemicals continues to draw interest in renewable energy applications. Although many metal catalysts are active in the CO₂ reduction reaction (CO₂RR), their reactivity and selectivity are nonetheless hindered by the competing hydrogen evolution reaction (HER). The competition of the HER and CO₂RR stems from the energy scaling relationship between their reaction intermediates. Herein, we predict that bimetallic monolayer electrocatalysts (BMEs) – a monolayer of transition metals on top of extended metal substrates – could produce dual-functional active sites that circumvent the scaling relationship between the adsorption energies of HER and CO₂RR intermediates. The antibonding interaction between the adsorbed H and the metal substrate is revealed to be responsible for circumventing the scaling relationship. Based on extensive density functional theory (DFT) calculations, we identify 11 BMEs which are highly active and selective toward the formation of formic acid with a much suppressed HER. The H–substrate antibonding interaction also leads to superior CO₂RR performance on monolayer-coated penta-twinned nanowires.

Dual-functional active sites are designed to circumvent the scaling relationship between the HER and CO₂RR on bimetallic monolayer electrocatalysts.     

Origin of the N-coordinated single-atom Ni sites in heterogeneous electrocatalysts for CO2 reduction reaction

Heterogeneous Ni–N–C single-atom catalysts (SACs) have attracted great research interest regarding their capability in facilitating the CO₂ reduction reaction (CO₂RR), with CO accounting for the major product. However, the fundamental nature of their active Ni sites remains controversial, since the typically proposed pyridinic-type Ni configurations are inactive, display low selectivity, and/or possess an unfavorable formation energy. Herein, we present a constant-potential first-principles and microkinetic model to study the CO₂RR at a solid–water interface, which shows that the electrode potential is crucial for governing CO₂ activation. A formation energy analysis on several NiN_xC_4−x (x = 1–4) moieties indicates that the predominant Ni moieties of Ni–N–C SACs are expected to have a formula of NiN₄. After determining the potential-dependent thermodynamic and kinetic energy of these Ni moieties, we discover that the energetically favorable pyrrolic-type NiN₄ moiety displays high activity for facilitating the selective CO₂RR over the competing H₂ evolution. Moreover, model polarization curves and Tafel analysis results exhibit reasonable agreement with existing experimental data. This work highlights the intrinsic tetrapyrrolic coordination of Ni for facilitating the CO₂RR and offers practical guidance for the rational improvement of SACs, and this model can be expanded to explore mechanisms of other electrocatalysis in aqueous solutions.

A constant-potential first-principles and microkinetic model is developed to uncover the nature of heterogeneous Ni–N–C catalysts. It highlights the crucial role of a pyrrolic-type NiN₄ moiety in electrochemical CO₂ reduction.