Chemical Synthesis and Characterization of Flaky h-BCN at High Pressure and High Temperature

Hexagonal boron carbonitrogen （h-BCN） compound is synthesized from a mixture of boron powder and CNH compound prepared by pyrolysis of melamine （CaH6N6） under high temperature （1400-1500℃） and high pressure （5.0-5.5 GPa）. X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and Raman spec- troscopy are used to determine the chemical composition and bonds of the product. The results show that the product has composition of B0.18C0.64N0.16 （near BC4N） and atomic-level hybrid. X-ray diffraction analysis indicates that the powder has a hexagonal network structure. Scanning and transmission electron microscopy results suggest that h-BCN compound morphology is mainly flaky in width about 1 μm and thickness 200nm.     

Synthesis of lanthanum nickelate perovskite nanotubes by using a template-inorganic precursor

A new route to obtain metal oxide nanotubes is presented: an inorganic coordination complex precursor containing the metal ions and impregnated into alumina membrane templates yield hollow tubular nanostructures of LaNiO₃ by calcination at 600 °C as characterized by powder X-ray diffraction (XRD). Scanning electron microscopy (SEM) shows that the resulting nanotubes have 200 nm in diameter in good agreement with the template pore. Transmission electron microscopy (TEM) and dark field transmission electron microscopy (DF-TEM) show that the nanotubes with 10-20 nm walls and internal separations are composed of 3-5 nm crystals.     

Room temperature synthesis of Cu2O nanocubes and nanoboxes

Monodisperse Cu₂O nanocubes are synthesized by reducing freshly prepared Cu(OH)₂ with N₂H₄·H₂O in water at room temperature. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations show that most of these nanocubes are uniform in size, with the average edge length of ∼500 nm. Selected area electron diffraction (SAED) investigation reveals that these nanocubes are single crystalline. Further, Cu₂O nanoboxes are obtained by etching Cu₂O nanocubes with acetic acid solution at room temperature. The nanoboxes retain the size and external morphology of the nanocubes.     

Chiral Symmetry Breaking During Growing Process of NaClO3 Crystal under Direct-Current Electric Field

We investigate the influence of dc electric field on chiral symmetry breaking during the growing process of NaClO3 crystal. Nucleation and growth of NaClO3 are completed from an aqueous solution by a fast cooling temperature technology. A pair of polarization microscopes are used to identify a distribution of chiral crystals. Experimental results indicate that the dc electric field has an effect on distribution of chirality, but the direction of the dc electric field is not sensitive to the chiral autocatalysis and selectivity, i.e. the nature convection driving by the gravity does not play an important role on a thin layer of NaClO3 solution. The experimental phenomena may be elucidated by the ECSN mechanism.     

Preparation and capacitances of oriented attachment CuO nanosheets and the MWNT/CuO nanocomposites

CuO nanosheets formed by oriented attachment of adjacent particles and the MWNT/CuO nanocomposites have been prepared through a simple hydrothermal process. The oriented attachment of adjacent particles through [111] and [002] crystallographic planes give rise to the formation of sheetlike morphology and the related mechanisms are discussed. Some needlelike and tubelike CuO nanocrystals came into being when the nanosheets rolled up and the capacitances of as-prepared MWNT/CuO nanocomposites were measured.     

In Situ Observation of Skeletal Shape Transition during BaB2O4 Crystal Growth in High-Temperature Solution

The transition from a fiat solid-liquid interface to a skeletal shape during BaB2O4 （BBO） single crystal growth in Li2B4O7 flux is observed in real time by an optical high-temperature in-situ observation system. The movement of crystal step is also investigated. The observation results demonstrate that the steps propagate along and parallel to the fiat interface when the crystal size is small. Nevertheless, they will ‘bend＇ close to the face centre if the crystal size becomes greater. Atomic force microscopy reveals that more deposition places near the face centre give rise to the bending of advancing steps and thus the formation of a vicinal interface structure. Measurements of step velocity show that the velocity keeps nearly constant at different moments for one specific step, whereas the step on a newly formed layer advanced faster than that on a previously formed one when the crystal size is larger than 210μm or so. Thus interracial morphological instability occurs and a skeletal interface is obtained.     

Effects of Al and Ti/Cu on Synthesis of Type-IIa Diamond Crystals in Ni70Mn25Co5-C System at HPHT

High-quality type-Ⅱa gem diamond crystals are successfully synthesized in a NiToMn25Co5-C system by temperature gradient method （TGM） at about 5.5 GPa and 1560 K. Al and Ti/Cu are used as nitrogen getters respectively. While nitrogen getter Al or Ti/Cu is added into the synthesis system, some inclusions and caves tend to be introduced into the crystals. When Al is added into the solvent alloy, we would hardly gain high-quality type-Ⅱa diamond crystals with nitrogen concentration Nc 〈 1 ppm because of the reversible reaction of Al and N at high pressure and high temperature （HPHT）. Piowever, when Ti/Cu is added into the solvent alloy, high-quality type-Ⅱa diamond crystals with Nc 〈 1 ppm can be grown by decreasing the growth rate of diamonds.     

Reactive Mechanical Alloying Synthesis of Nanocrystalline Cubic Zirconium Nitride

Zirconium nitride powders with rock salt structure （γ-ZrNx） are prepared by mechanical milling of a mixture of Zirconium and hexagonal boron nitride （h-BN） powders. The products are analysed by x-ray diffraction （XRD）, scanning electron microscopy （SEM）, and Raman spectroscopy （ITS）. The formation mechanism of γ-ZrNx by ball milling technique is investigated in detail. N atoms diffuse from amorphous BN （a-BN） into Zr to form Zr（N） solid solution alloy, then the Zr（N） solid solution alloy decomposes into γf-ZrNx. No ZrB2 is observed in the as-milled samples or the samples annealed at 1050° C for 2h.     

Photocatalytic Properties of TiO2/Si-NPA Nano Composite Systems

A new composite system is fabricated by depositing the TiO2 film on a silicon nanoporous pillar array （Si-NPA） and annealing at 500℃ using the spin coating method. Such a composite system exhibits a uniform morphology with the micron-dimension pillar array. Photocatalytic properties are investigated based on the degradation of methyl orange dye solution, and the results show that the photocatalytic efficiency of such a nano-composite system is 1.7 times that of the TiO2/glass system. The enhancement of photocatalytic efficiency is attributed to the large surface area of the TiO2/Si-NPA system.     

Synthesis of crystalline SrMoO4 nanowires from polyoxometalates

Crystalline SrMoO₄ nanowires were synthesized via a facile hydrothermal process at 180 °C for 10 h. α-(NH₄)₆-P₂Mo₁₈O₆₂·nH₂O, one of polyoxometalates with Dawson structure, was employed as the source of molybdates. The diameter and length of the obtained SrMoO₄ nanowires are about 20 nm and 5-10 μm, respectively. HRTEM results show that the SrMoO₄ nanowires are of high crystallinity with rough surface. However, when Na₂MoO₄·2H₂O was used, there are only SrMoO₄ nanorods with smaller aspect ratio (200/70 nm) in the similar hydrothermal process. The probable growth mechanism was discussed.     

Hyperfine interactions in some Aurivillius Bim+1Ti3Fem−3O3m+3 compounds

X-ray diffraction and Mössbauer spectroscopy were applied as complementary methods to investigate the structure and hyperfine interactions in the series of Bi_m+1Ti₃Fe_m−3O_3m+3 Aurivillius compounds with m=4, 6, 7 and 8. Samples were synthesized by the solid-state sintering method at various temperatures. As X-ray diffraction analysis proved, the compounds formed single phases at temperature above 993 K. Mössbauer studies have confirmed diffraction measurements. Compounds synthesized at 993 K contained residual hematite, however these sintered at elevated temperatures were single-phased materials. Room-temperature Mössbauer spectra of Bi_m+1Ti₃Fe_m−3O_3m+3 compounds revealed their paramagnetic properties, what is consistent with the literature data concerning the Néel temperature of these ceramics (T_N is smaller than room temperature). Detailed analysis of MS spectra allowed to state that iron ions may occupy both tetrahedral and octahedral sites in the crystallographic lattice of Aurivillius compounds.     

Characterization of LaMnAl11O19 by FT-IR spectroscopy of adsorbed NO and NO/O2

The nature of the NO_x species produced during the adsorption of NO at room temperature and during its coadsorption with oxygen on LaMnAl₁₁O₁₉ sample with magnetoplumbite structure obtained by a sol-gel process has been investigated by means of in situ FT-IR spectroscopy. The adsorption of NO leads to formation of anionic nitrosyls and/or cis-hyponitrite ions and reveals the presence of coordinatively unsaturated Mn³⁺ ions. Upon NO/O₂ adsorption at room temperature various nitro-nitrato structures are observed. The nitro-nitrato species produced with the participation of electrophilic oxygen species decompose at 350 °C directly to N₂ and O₂. No NO decomposition is observed in absence of molecular oxygen. The adsorbed nitro-nitrato species are inert towards the interaction with methane and block the active sites (Mn³⁺ ions) for its oxidation. Noticeable oxidation of the methane on the NOx⁻-precovered sample is observed at temperatures higher than 350 °C due to the liberation of the active sites as a result of decomposition of the surface nitro-nitrato species. Mechanism explaining the promoting effect of the molecular oxygen in the NO decomposition is proposed.     

Enhanced diamond nucleation on copper substrates by graphite seeding and CO2 laser irradiation

Diamond nucleation on copper (Cu) substrates was investigated by graphite seeding and CO₂ laser irradiation at initial stages of the combustion-flame deposition. A graphite aerosol spray was used to generate a thin layer of graphite powders (less than 1 μm) on Cu substrates. The graphite-seeded Cu substrates were then heated by a continuous CO₂ laser to about 750 °C within 1 min. It was found that diamond nucleation density after this treatment was more than three times as much as that on the virgin Cu substrates. As a consequence, diamond films up to 4 μm were obtained in 5 min. The enhancement of diamond nucleation on the graphite-seeded Cu substrates was attributed to the formation of defects and edges during the etching of the seeding graphite layers by the OH radicals in the flame. The defects and edges served as nucleation sites for diamond formation. The function of the CO₂ laser was to rapidly heat the deposition areas to create a favorable temperature for diamond nucleation and growth.     

Preparation of Mg55Ni35Si10 Amorphous Powders by Mechanical Alloying and Consolidation by Vacuum Hot Pressing

Amorphous Mg55Ni35Si10 powders are fabricated by using a mechanical alloying technique. The amorphous powders are found to exhibit a relatively high crystallization temperature of 380℃. The as-milled amorphous Mg55Ni35Si10 powders are consolidated successfully into bulk body by vacuum hot pressing technique. Limited nanocrystallization is noticed. The Vickers microhardness range of the Mg55Ni35Si10 bulk sample is 7834 to 8048 MPa. Its bending strength and compressive strength are 529 MPa and 1466 MPa, respectively.     

Structural and Optical Properties of Nanocrystal In2O3 Films by Thermal Oxidation of In2S3 Films

In₂S₃ nanocrystalline films are prepared on glass substrates by the spray pyrolysis technique using indium chloride and thiourea as precursors. The deposition is carried out at 350°C on glass substrates. The films are then annealed for two hour at 200, 400, 600, and 800°C in O₂ flow. This process allows the transformation of nanocrystal In₂O₃ films from In₂S₃ films and the reaction completes at 600°C. These results indicate that the In₂O₃ film prepared by this simple thermal oxidation method is a promising candidate for electro-optical and photovoltaic devices.     

Simulation of KrF laser ablation of Al2O3-TiC

Previous work by the authors on micromachining of Al₂O₃-TiC ceramics using excimer laser radiation revealed that a columnar surface topography forms under certain experimental conditions. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) observations show that the columns develop from small globules of TiC, which appear at the surface of the material during the first laser pulses. To understand the mechanism of formation of these globules, a 2D finite element ablation model was developed and used to simulate the time evolution of the temperature field and of the surface topography when a sample of Al₂O₃-TiC composite is treated with KrF laser radiation. Application of the model showed that the surface temperature of TiC rises much faster than that of Al₂O₃, but since TiC has a very high boiling temperature, its vaporization is significant only for a short time. By contrast, the surface temperature of Al₂O₃ rises above its boiling temperature for a much longer period, leading to a greater ablation depth than TiC. As a result, a small TiC globule stands above the Al₂O₃ surface. The results of the model are compared with experimental measurements performed by AFM. After three pulses, the height of the globules predicted by the model is about 340 nm, in good agreement with the height measured experimentally, about 400 nm.     

Effect of Carbon Source with Different Graphitization Degrees on the Synthesis of Diamond

Using three kinds of graphites with different graphitization degrees as carbon source and Fe-Ni alloy powder as catalyst, the synthesis of diamond crystals is performed in a cubic anvil high-pressure and high-temperature apparatus （SPD-6 × 1200）. Diamond crystals with perfect hexoctahedron shape are successfully synthesized at pressure from 5.0 to 5.5GPa and at temperature from 1570 to 1770K. The synthetic conditions, nucleation, morphology, inclusion and granularity of diamond crystals are studied. The temperature and pressure increase with the increase of the graphitization degree of graphite. The quantity of nucleation and granularity ofdiamonds decreases with the increase of graphitization degree of graphite under the same synthesis conditions. Moreover, according to the results of the M6ssbauer spectrum, the composition of inclusions is mainly Fe3 C and Fe-Ni alloy phases in diamond crystals synthesized with three kinds of graphites.     

Structural Transition of Gd2O3：Eu Induced by High Pressure

The structural transition of bulk and uano-size Gd2O3：Eu are studied by high pressure energy disperse x-ray diffraction （XRD） and high pressure photoluminescence. Our results show that in spite of different size of Gd2O3 particles, the cubic structure turns into a possible hexagonal one above 13.4 GPa. When the pressure is released, the sample reverses to the monoclinic structure. No cubic structure presents in the released samples. That is to say, the compression and relaxation of the sample leads to the cubic Gd2O3：Eu then turns into the monoclinic one.     

Synthesis and optical properties of Co-doped ZnO nanofibers prepared by electrospinning

In this work, Co-doped ZnO nanofibers have been fabricated successfully by an electrospinning technique. The as-prepared nanofibers are characterized by themogravimetric analysis (TG), scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), Raman spectra and photoluminescence spectroscopy (PL). Results have showed that a wurtzite ZnO nanofibers were obtained and the PL spectrum showed a red-shift by 10 nm due to narrowing of the ZnO band gap (∼3.29 eV) as a result of Co doping. Meanwhile, Raman scattering spectra exhibited an unusual peak at 540 cm⁻¹.     

Superconducting Transition Temperature and Metal--Semiconductor Transition Temperature in YBa2Cu4O8/La0.67Ca0.33MnO3/YBa2Cu4O8 Trilayer Films

YBa₂Cu₄O₈/La_0.67Ca_0.33MnO₃/YBa₂Cu₄O₈(YBCO/LCMO/YBCO) trilayer films were prepared by magnetron facing-target sputtering. For the first time, the oscillatory behaviour of superconducting transition temperature T_c,ON with the thickness of LCMO (d_L) has been observed. The strongest nonmonotonic information in the T_c,ON--d_L curves appears clearly when d_L is larger than the critical thickness d_L^CR. The metal--semiconductor transition temperature can only be detected at d_L>d_L^CR. The dependence on the ferromagnetic spacer layer in YBCO/LCMO/YBCO systems suggests strongly the interplay of ferromagnetic and superconducting couplings.