微波-超声复合场辅助水介质砜类化合物合成

发展了一种微波-超声复合场下绿色高效合成砜类化合物的简便方法。 以芳甲基氯和苯亚磺酸钠为原料,以水为反应介质,在微波-超声复合场辅助下合成了一系列芳甲基苯基砜。 通过考察微波功率、超声功率、原料投料比、溶剂体积和反应时间等因素的影响,得出了苄基氯与苯亚磺酸钠之间模型反应的最优反应条件:微波功率为40 W,超声功率为50 W,苄基氯与苯亚磺酸钠的摩尔配比为1:3,反应时间为5 min。 在此条件下合成的苄基苯基砜产率为83%。 相比常规油浴条件,在微波-超声复合场的强化下反应速率提升了约42倍。 该方法具有较好的底物适应性,成功合成了23种砜类化合物。     

双核水杨醛亚胺铁系催化剂的合成及对乙烯齐聚催化性能的研究

以1.0代(1.0G)树枝状大分子、水杨醛和FeCl_2·4H_2O为原料,依次经过希夫碱反应和络合反应合成了一种双核水杨醛亚胺铁系催化剂。FT-IR、1 H NMR、UV和MS证实合成产物的结构与理论结构相符。以甲基铝氧烷(MAO)为助催化剂,考察了溶剂种类、反应温度、反应压力、Al/Fe摩尔比及金属活性中心种类对催化体系催化乙烯齐聚性能的影响。结果表明,当以甲苯为溶剂,聚合时间为30min,反应温度为15℃、反应压力为0.5MPa、Al/Fe摩尔比为1000时,该双核水杨醛亚胺铁系催化剂的活性可达1.14×10~5g/(mol Fe·h),齐聚产物中C_4及C_6烯烃含量高达90%以上。     

Reduction of 4-nitrophenol catalyzed by nitroreductase

The reduction of 4-nitrophenol catalyzed by nitroreductase in the presence of NADH was investigated in this paper.4-Amino- phenol and 4-bydroxylamino-phenol were found in the reductive products.The relationship between reaction time and the reductive ratio were studied.The similar reducing ratios of 4-nitrophenol were obtained under aerobic and anaerobic conditions.The results indicated that an oxygen-insensitive reaction was proceeded in the reduction of 4-nitrophenol and nitroreductase was an oxygen- insensitive enzyme.The reductive products of 4-nitrophenol were determined by HPLC and MS.     

Multicomponent Reaction for Synthesis of Novel 2‐Tosyloxyphenylpyridines

2‐Tosyloxybenzaldehyde 1 was reacted with some active methylene compounds as 1:1 or 1:2 molar ratio under different basic conditions to afford the corresponding 2‐tosyloxyarylidenes 2–4 and/or 2‐tosyloxyphenylpyridine 5 , respectively. Multicomponent reaction of 2‐tosyloxyarylidene 2 and AcONH₄ with active methylene compounds namely: malononitrile, ethyl acetoacetate, ethyl benzoylacetate, 1,3‐benzothiazol‐2‐ylacetonitrile, acetophenones or 3‐acetylheterocycle derivatives in methanol gave 2‐tosyloxyphenylpyridine derivatives 8 – 17 , respectively. The structures of new compounds were elucidated by elemental and spectral analysis.     

Knölker's iron complex: an efficient in situ generated catalyst for reductive amination of alkyl aldehydes and amines

An aminated series: a well-defined iron-catalyzed reductive amination reaction of aldehydes and ketones with aliphatic amines using molecular hydrogen is presented. Under mild conditions, good yields for a broad range of alkyl ketones as well as aldehydes were achieved.     

A new approach to the determination of the heat of phenolic resol synthesis

A new method has been developed for the determination of the heat of phenolic resol synthesis carried out in an aqueous solution. This heat is determined as the difference in the heats of syntheses of the resitol from the mixture of raw materials and from the resol studied. Heats of resitol syntheses were determined by DSC at constant heating rate using high-pressure crucibles, i.e. under isochoric conditions for the liquid–vapour sample.

The heat of synthesis of resols, obtained at formaldehyde-to-phenol molar ratio equal to 3.0 and using NaOH as catalyst, were determined. The relevant values were calculated on the basis of the chemical composition of the resols and the molar enthalpies of the aromatic ring substitution and methylene bridge formation reactions. The experimentally determined heats were consistent with the calculated ones, not when free formaldehyde (CH₂O) but its monohydrate, CH₂O·H₂O (methylene glycol, HO–CH₂–OH) was assumed to be the reactive form of formaldehyde in an aqueous medium (formalin).     

Transesterification of palm oil using supercritical methanol with co-solvent HCFC-141b

The transesterification of palm oil in supercritical methanol has been investigated without using any catalyst. HCFC-141b was used as co-solvent to reduce the molar ratio of methanol to palm oil under the milder conditions. The reaction was carried out in a flow-type tubular reactor. The residence time was fixed at 40 min. When the molar ratio of methanol to palm oil was set to 20:1 at 325 °C and 35 MPa, the optimum molar ratio of methanol to co-solvent was found to be 20:1. Addition of HCFC-141b increased FAME production even at the lower molar ratio of methanol to palm oil. In addition, a similar FAME content was obtained under the milder conditions (5 MPa lower pressure) compared with conditions without co-solvent at higher pressure. The role of HCFC-141b in the transesterification reaction under supercritical conditions was investigated.     

Synthesis of 2,2’-Biflavanones from Flavone via Electroreduction and Photolysis

Biflavonoids, widely distributed in natural plants, had strong biological activities including spasmolysis, peripheral vasodilatation, antibradykinin activity and antispasmogenic action against prostaglandin PGE1, inhibition of cyclic GMP and cyclic AMP phosphodiesterase and inhibition of hepatoma cells. Recently, some biflavonoids were demonstrated to enhance suppersion of lymphocyte proliferation, inhibition of phospholipaseCr1, anti-inflammatory activity, anti-HIV activity, anticompleme…     

二硅烷表面活性剂的合成与表面性能测定

合成了一种新型有机硅表面活性剂--聚醚改性二硅烷。 首先以(CH3)3SiCl和(CH3)2HSiCl为原料,金属钠作还原偶合剂,二甲苯作溶剂,用Wurtz偶合法合成了含氢二硅烷,对其结构进行了红外光谱、紫外吸收光谱和气相色谱表征,并确定了合成最佳反应条件：n((CH3)3SiCl)∶n((CH3)2HSiCl)=1.2∶1,反应物浓度为1.8 mol/L,助剂15-冠醚-5用量为总反应原料质量的2%,反应温度为80 ℃,反应时间为11 h。 再以合成的含氢二硅烷和甲基封端烯丙基聚醚（Mr=400）为原料,在Karstedt铂催化剂作用下进行硅氢加成反应,合成了聚醚改性二硅烷表面活性剂,确定的合成反应最佳温度为95 ℃,时间为4 h;该表面活性剂的表面张力为22.49 mN/m,临界胶束浓度为0.9 g/L,在pH值为6.94和4.12的水溶液中,具有良好的水解稳定性。     

层状前体镍铁水滑石及磁性材料的制备及表征

提出了利用镍铁水滑石作为磁性前体再经高温焙制备尖晶石型铁氧体思路，深 入研究了水滑石的制备工艺及结构性能并初步探讨了其焙烧后的磁学性能。由共沉 淀法合成了Ni/Fe摩尔比为2，3，4，6的镍铁水滑石，XRD结果表明镍铁比为3时晶 形较为理想，且随着晶化温度的升高及晶化时间的延长，水滑石的晶体结构规整性 增强。热重-差热结果显示镍铁水滑石的分解有两个过程，当镍铁比为3时，水滑石 的热稳定性相对最高。高温焙烧后的镍铁水滑石具有磁性。     

麦芽糖基(α-1→6)β-环糊精的酶法合成和结构鉴定

采用地衣芽孢杆菌普鲁蓝酶合成Mal-β-CD, 反应产物体系成分简单, 易于分离, Mal-β-CD的转化率可达到56%.     

木质素对木质素-脲醛共聚树脂的影响及反应机理

通过调控甲醛与尿素摩尔比, 降低脲醛树脂胶黏剂中游离甲醛的含量, 以生物质玉米芯为原材料, 用碱液提取得到的碱木质素溶液与甲醛和尿素进行三元逐步共聚, 弥补降低醛脲比带来的胶合强度的快速下降问题. 以降低游离甲醛含量同时兼顾胶合强度为原则进行探索, 得到最佳实验条件为甲醛与尿素摩尔比(F/U)为0.91∶1, 木质素添加量为20%(质量分数), 在此条件下木质素-尿素-甲醛共聚树脂(LUF)胶合强度为0.99 MPa, 游离甲醛含量为0.26%. 对共聚树脂进行了结构表征, 表明木质素参与到反应中, 并能提高树脂的热稳定性和耐水性, 同时对反应的机理进行了讨论.     

乙酸异戊酯的合成

以乙酸和异戊醇作为原料,利用SnCl4催化作用下的酯化反应合成了乙酸异戊酯;研究了反应时间、酸醇的物质的量之比、催化剂用量、带水剂用量等因素对产物收率的影响,并确定了优化反应条件.结果表明,优化反应条件为:反应时间60min,酸醇物质的量之比1∶0.8(乙酸5.76mL),催化剂用量0.35g,带水剂用量10mL.在优化反应条件下,产物收率最高可达86.3%.     

芳香硝基化合物原位液相加氢一锅法合成喹啉类化合物

以芳香硝基化合物为起始原料,以2%Pt-Sn/γ-Al2O3为催化剂,采用原位液相加氢法可以一锅法合成喹啉类化合物,考察了Pt/Sn摩尔比、反应温度、原料浓度和水含量等对反应性能的影响.结果表明,在Pt/Sn摩尔比0.5,220oC,5.0MPa,原料浓度6%,水含量30%及反应物停留时间为72s的条件下,生成产物6-甲氧基-2-甲基喹啉的收率可达72%.     

苯并噻唑-2-甲醛合成方法的改进

以邻氨基苯硫酚为原料,先与羟基乙酸反应合成2-羟甲基苯并噻唑,然后通过氧化反应生成苯并噻唑-2-甲醛。对比了几种氧化剂的效果,发现二氧化锰氧化的效果最好。优化的反应条件为,2-羟甲基苯并噻唑与二氧化锰的摩尔比为1∶8,回流反应8h,产率可达90.2%。该方法适合苯并噻唑-2-甲醛及其衍生物的大规模生产。     

铌酸催化液相合成乙酸乙酯

报道了铌酸催化乙醇与乙酸的液相酯化反应考察了反应温度、催化剂用量、酸醇比、反应时间对产品乙酸乙酯经的影响。在优化条件下,产品收率棕达８８．０％,选择性为１００％,同时我们采用自制间式反应,对催化剂的稳定性进行了考察,发现铌酸在该实验条件下,能保持较高的稳定性和较高的催化活性。     

甲醇水蒸气重整制氢Cu/ZnO/Al2O3催化剂的研究

燃料电池作为一种无污染、高效率的能源引起世界各大汽车公司的广泛关注[1,2]。用于燃料电池的燃料目前研究较多的是氢气,用氢气作燃料存在储存、安全、运输等问题,寻求合适贮氢方法或替代燃料,实现车载制氢是解决问题的办法。甲醇作为液体燃料,因具有高能量密度,低碳含量,以及运输和贮存等优势成为车载制氢的理想燃料,甲醇水蒸气重整制氢反应也成为研究的热点[3～10]。车载制氢对甲醇水蒸气重整制氢反应体系中的产氢速率,氢气和CO的含量都有一定的要求。尤其对CO含量要求更为苛刻,因CO易引起燃料电池阳极催化剂中毒[11,12]。因此,开…     

Preparation of Helical Mesoporous Ethenylene-silica Nanofibers with Lamellar Mesopores on Their Surface

The morphologies and pore architectures of mesoporous ethenylene‐silica were controlled using cetyltrimethylammonium bromide (CTAB) as template and (S)‐β‐citronellol as a co‐structure‐directing agent under basic conditions. When the (S)‐β‐citronellol/CTAB molar ratios are in the range of 0.75–2.0, helical nanofibers were obtained. With increasing the (S)‐β‐citronellol/CTAB molar ratio, the lengths of the nanofibers increases. Lamellar mesopores were identified on the surfaces of the nanofibers prepared in the (S)‐β‐citronellol/CTAB molar ratio range of 1.5–2.0. At the (S)‐β‐citronellol/CTAB molar ratio of 2.5:1, nanoparticles with nanoflakes on the surfaces were obtained. The field emission scanning electron microscopy images taken after different reaction times indicated that the helical pitches of the nanofibers decreased with increasing the reaction time. Helical 1,4‐phenylene‐silica and methylene‐silica nanofibers were also prepared. The results indicated that the morphologies and pore architectures of the obtained organic‐inorganic hybrid silicas are also sensitive to the hybrid silica precursors. Helical ethenylene‐silica nanofibers with lamellar mesopores on their surfaces can be also prepared using the mixtures of CTAB and racemic citronellol within a narrower citronellol/CTAB molar ratio range.     

Impurity profiling of seized MDMA tablets by capillary gas chromatography

Impurity profiles of 3,4-methylenedioxymethylamphetamine (MDMA) tablets seized in France have been examined. The samples were extracted with methylene chloride under basic conditions and then analyzed by capillary gas chromatography. Almost 30 compounds were identified as precursors, intermediates and by-products. Palmitic and stearic acid were also found as tableting materials. The comparison of the different profiles obtained by the reported procedure provided very useful information about the synthetic processes used by clandestine laboratories and enabled a classification into several groups of profiles. According to these results, the reductive amination route appears to be the most common synthetic pathway in Western Europe. Furthermore, 3,4-methylenedioxyphenyl-2-propanone seems to be the most used precursor in clandestine laboratories.     

微波辐射法合成SAPO-5分子筛中硅铝比对产物结晶度和甲苯吸附性能的影响

采用硅溶胶作硅源, 用微波辐射法在酸性条件下(pH=4.5-5.0)合成了SAPO-5分子筛, 利用X射线衍射(XRD), 傅立叶变换红外光谱(FT-IR), 扫描电镜(SEM)和Brunauer-Emmett-Teller (BET)比表面积分析对样品的结晶度、形貌和比表面等进行表征, 考察了晶化原料硅铝比对分子筛结晶度和晶体颗粒长径比(c/a)的影响, 测定了分子筛对甲苯的吸附性能. 结果显示, 采用微波辐射法合成的SAPO-5分子筛, 在硅铝摩尔比为0.50附近生成产物的结晶度最好, 晶体颗粒的长径比最小(约为1.0). 尽管不同硅铝比条件下得到的样品比表面测定结果变化不大, 但对甲苯的吸附实验显示, 在硅铝比为0.50时样品的吸附速率和饱和吸附量均达到了最大值. 这与表征所得的结晶度和长径比的变化一致, 即结晶度好,长径比小的SAPO-5分子筛具有更好的甲苯吸附性能.