Structure and evolved gas analyses (TG/DTA-MS and TG-FTIR) of <Emphasis Type="Italic">mer</Emphasis>-trichlorotris(thiourea)-indium(III), a precursor for indium sulfide thin films

The indium complex, mer-trichlorotris(thiourea)-indium(III) (In(tu)₃Cl₃, 1), crystallized from aqueous solution of InCl₃ and SC(NH₂)₂ (tu) with molar ratio of 1:3, is a single-source precursor for In₂S₃ films by chemical spray pyrolysis. The structural model of the triclinic crystal 1 (space group P-1 with a = 8.4842(2) Å, b = 10.5174(2) Å, c = 13.1767(2) Å, α = 111.1870(10)°, β = 98.0870(10)°, γ = 97.889(2)°) has been improved by single crystal X-ray diffraction analysis through successful separation of the disordered positions of the asymmetric complex molecule situated on the inversion centre into two spatial arrangements. Thermal decomposition of 1 occurs with very similar mass loss courses till 400 °C in both nitrogen and air, anyhow the DTA curve indicates a gas-phase oxidation with an additional exothermic heat effect at 255 °C in air. Partial or more advanced oxidation of the initially evolved CS₂ has taken place in both atmospheres, as its oxidation products, SO₂, COS, CO₂ are accompanied by the release of NH₃, HCl in temperature range of 205–275 °C, while H₂NCN and HCN evolve in air. In the third mass loss step, in the temperature interval of 405–750 °C in nitrogen and 405–700 °C in air, two processes, evaporation and oxidation of the solid residues are competing with each other, resulting in final decomposition product of 1 in air In₂O₃, while also some In₂O₃ in inert atmosphere beyond the main phase of In₂S₃ where, in addition considerable extent of loss of indium occurs, probably through volatile dimeric indium chloride species, which could not be detected either by EGA-MS or EGA-FTIR systems of ours. Nevertheless, evolution of HNCS is confirmed by EGA-FTIR, and release of CO₂, H₂NCN, SO₂, and a little HCl is detected at temperatures above 450 °C in both atmospheres.     

Syntheses and characterization of a new class of vanadia precursors of oxime-modified oxovanadium(V) isopropoxide,crystal and molecular structure of [VO{ONC10H16}3]

Modification of [VO(OPrⁱ)₃] with oximes in different molar ratios, yielded new class of vanadia precursors, [VO{OPrⁱ}_3?n{L}_n] {where, n = 1–3 and LH = C₉H₁₆C=NOH (1–3) and (CH₃)₂C=NOH (4–6)}.All the products are yellow in colour. (1) and (2) are liquid/viscous liquid, while others are solids. Molecular weight measurements of all these derivatives and the ESI-mass spectral studies of (1), (2), (3) and (5) indicate their monomeric nature. ¹H and ¹³C{¹H} NMR spectra suggest that the oximato moieties are monodentate in solution which was further confirmed by the ⁵¹V NMR signals, appeared in the region expected for tetra-coordinated oxo-vanadium atoms. On ageing, a disproportionation reaction occurs in (1) and some crystals appeared. Single crystal X-ray diffraction analyses of the crystals obtained from (1) as well as from (3) were found to be the same and indicate the presence of side-on {dihapto η ²-(N, O)} binding modes of the oximato ligands, leading to the formation of seven coordination environment around the vanadium atom. Thermogravimetric curve of (1) exhibits multi-step decomposition with the formation of V₂O₅ as the final product at ~850 °C. Sol–gel transformation of (3) yielded (a) VO₂ sintered at 300 °C and (b) V₂O₅ at 600 °C. Similarly, sol–gel transformations of (1) and (2) yielded V₂O₅ (c) and (d) at 600 °C, respectively. Formation of monoclinic phase in (a) and orthorhombic phase in (b), (c) and (d) were confirmed by powder XRD patterns.     

Inclusion of Cl− or Br− anions within host framework formed by second-sphere interactions

In this study, we have deliberately utilized the second-sphere coordination approach into the construction of supramolecular inclusion solids Cl ? [H₂ L1]·[InCl₄] (Crystal I) and Br ? [H₂ L1]·[TeBr₆] (Crystal II). The chloride or bromine anions can be encapsulated inside the host assemblies formed by the diamine molecule (4,6-dimethyl-1,3-phenylene) bis(N,N-dibenzylmethane) (L1) and the metal complexes ([InCl₄]^? and [TeBr₆]^2?) via second-sphere interactions. The inclusion complexes have been structurally characterized by X-ray crystallography, indicating that weak C–H···Cl and C–H···Br hydrogen bonding synthons play a significant role in the construction of host framework. 2-D networks are formed in both complexes by the interconnection of 1-D networks through the multiple weak hydrogen bonding interactions with [InCl₄]^? or [TeBr₆]^2?. The guest Cl^? or Br^? anions are encapsulated inside the host cages through N–H···Cl hydrogen bonds. The inclusion selectively was studied for the two host assemblies.     

Synthesis and characterization of glycol ether and oxime modified precursors of niobium(V) for soft transformation to niobia

A glycol ether modified precursor, [Nb{O(CH₂CH₂O)₂}(OPrⁱ)₃] (A) was prepared by the reaction of Nb(OPrⁱ)₅ with O(CH₂CH₂OH)₂ in 1:1 molar ratio in anhydrous benzene. Further reactions of A with a variety of internally functionalized oximes in different molar ratios, yielded heteroleptic complexes of the type, [Nb{O(CH₂CH₂O)₂}(OPrⁱ)_3?n{ON = C(CH₃)(Ar)}_n] (1–9) {where Ar = C₄H₃O-2, n = 1 [1], n = 2 [2], n = 3 [3]; C₄H₃S-2, n = 1 [4], n = 2 [5], n = 3 [6]; C₅H₄N-2, n = 1 [7], n = 2 [8], n = 3 [9]}. All the above derivatives have been characterized by elemental analyses, FT-IR, NMR (¹H, ¹³C {¹H}) and FAB mass studies. Spectral studies of 1–9 suggest the presence of mono- and bi-dentate mode of oxime moieties, in the solution and in the solid states, respectively. FAB mass studies indicate monomeric nature for 3 and dimeric nature for A. TG curves of A and 6 show their low thermal stability. Soft transformation of A and 3 to pure niobia, a and b, respectively have been carried out by sol–gel technique. The XRD patterns of niobia a and b suggest the formation of nano-size crystallites of average size of 10.8 and 19.5 nm, respectively. The XRD patterns also indicate the formation of monoclinic phase of the niobia in both the cases. Absorption spectra of a and b suggest energy band gaps of 4.95 and 4.39 eV, respectively.     

Non-aqueous synthesis of nano-sized aluminium(III) isopropoxide derivatives with 8-hydroxyquinoline and their sol–gel transformation to nano-sized δ-alumina

Non-aqueous reactions of aluminum isopropoxide with 8-hydroxyquinoline (Hq = HONH₆C₉) in 1:1, 1:2 and 1:3 molar ratios in anhydrous benzene yield complexes of the type [q_nAl(OPrⁱ)_3?n] {where n = 1 (1), n = 2 (2), n = 3 (3)}. Progress of the reactions were monitored by estimating liberated 2-propanol in benzene-2-propanol azeotrope by oxidimetric method. All the products were fluorescent green powders, sparingly soluble in CHCl₃. They were characterized by elemental analysis, FT-IR and (¹H, ¹³C and ²⁷Al) NMR studies. The ESI mass spectral studies indicate dimeric nature for (1) and (2) and monomeric nature for the compound (3). The XRD spectra of (1–3) showed crystalline nature with the average particle size of 45, 32 and 27 nm respectively, as evaluated from Debye–Scherrer equation. The XRD spectrum of (3) also suggests the formation of β-crystalline polymorphs of Alq₃. The SEM images appear to indicate granular morphology for (1) and formation of cylindrical shaped rods for (2) and (3). Sol–gel hydrolysis of (1), (2) or (3) in presence of a strong acid as well as of the precursor, Al(OPrⁱ)₃,without acid or base catalyst, followed by sintering at 950 °C yielded tetragonal primitive phase of nano-sized δ-alumina in all the cases, as reflected by their powder X-ray diffraction pattern. The IR, SEM and EDX studies also support the formation of transition alumina.     

Theoretical study on the singlet and triplet potential energy surfaces of NH (X3Σ−) + HCNO reaction

Both the singlet and triplet potential energy surfaces (PESs) of the NH (X³Σ^?) + HCNO reaction have been investigated at the BMC-CCSD level based on the UB3LYP/6-311++G(d, p) structures. The results show that the title reaction is more favorable through the singlet potential energy surface than the triplet one. For the singlet potential energy surface of the NH (X³Σ^?) + HCNO reaction, the most feasible association of NH (X³Σ^?) with HCNO is found to be a non-barrier nitrogen-to-carbon attack forming the adduct a (trans-HNCHNO), which can isomerize to the adduct b (cis-HNCHNO). The most feasible channel is that the 1, 3-H shift with N2–H2 and C–N1 bonds cleavage associated with the N1–H2 bond formation of adduct a leads to the product P ₁ (HCN + HNO). Moreover, P ₂ (HNC + HNO) should be the competitive product. The other products, including P ₃ (NH₂ + NCO) and P ₄ (N₂H₂ + CO), are minor products. The product P ₁ can be obtained through two competitive channels Path 1: R → a → P ₁ and Path 3: R → b → d → P ₁ , whereas the product P ₂ can be formed through Path 2: R → b → d → P ₂ . At high temperatures, the nitrogen-to-nitrogen approach may become feasible. For the triplet potential energy surface of the NH (X³Σ^?) + HCNO reaction, the Path 10: R → ³ a → ³ a ₁ → P ₁ should be the most feasible pathway due to the less reaction steps and lower barriers. These conclusions will have impacts on further experimental investigations.     

Synthesis,characterization, and thermal behavior of palladium(II) complexes containing 4-iodopyrazole

The mononuclear pyrazolyl complexes [PdCl₂(HIPz)₂] (1), [PdBr₂(HIPz)₂] (2), [PdI₂(HIPz)₂] (3), [Pd(SCN)₂(HIPz)₂] (4), and [Pd(NHCOIPz)₂] (5) have been prepared. Compound 1 was obtained from the displacement of acetonitrile from [PdCl₂(CH₃CN)₂] precursor by the 4-iodopyrazole (HIPz) ligand, whereas 2–5 were synthesized by substitution of the chlorido in 1 by the respective anionic group. The compounds were characterized by elemental analysis, infrared spectroscopy, and ¹H NMR spectroscopy. The thermal behavior of 1–5 has been studied by TG and DTA. The thermal stability of [PdX₂(HIPz)₂] compounds varies according to the trends X = Cl^? < I^? ? SCN^?< Br^?. No stable intermediates were isolated during the thermal decompositions due to the overlap of the degradation processes. The final products of the thermal decompositions were characterized as metallic palladium by X-ray powder diffraction.     

Synthesis and thermal behavior study of complexes of the type [Pd(μ-X)(4-eb-p-phen)]2 (X = Cl,Br, I,N3, NCO,SCN) and 4-eb-p-phen [bis(4-ethylbenzyl)p-phenylenediimine]

The Schiff base bis(4-ethylbenzyl) p-phenylenediimine, 4-eb-p-phen (1), and six new dimeric Pd(II) complexes of the type [Pd(μ-X)(4-eb-p-phen)]₂ {X = Cl (2), Br (3), I (4), N₃ (5), NCO (6), SCN (7)} have been synthesized and characterized by elemental analysis, IR spectroscopy, and ¹H and ¹³C{¹H}-NMR experiments. The thermal behavior of the complexes 2–7 has been investigated by means of thermogravimetry and differential thermal analysis. From the final decomposition temperatures, the thermal stability of the complexes can be ordered in the following sequence: 3 > 4 > 7 > 2 ≈ 5 > 6. The final products of the thermal decompositions were characterized as metallic palladium by X-ray powder diffraction (XRD).     

Synthesis and characterization of some acetoxime-modified hetero-metal alkoxide precursors of zinc(II) and aluminum(III) for sol–gel transformation to nano-sized ZnAl2O4

Reactions of [ZnAl₂(OPr_i)₈] [A] with acetoxime in different molar ratios in refluxing anhydrous benzene, yield complexes of the type [ZnAl₂(OPrⁱ)_8?n{(CH₃)₂CNO}_n] {where, n = 1–4}. All the complexes are transparent viscous/foamy solids. They were characterized by elemental analyses, FT-IR and NMR (¹H, ¹³C {¹H}) spectral studies. ²⁷Al NMR spectrum of [ZnAl₂(OPrⁱ)₄{(CH₃)₂CNO}₄] [4] in CDCl₃ suggests presence of four coordination around both the aluminum atoms. IR spectra suggest that the oximato ligands bind the aluminum atoms in a side on manner in all the complexes. The ESI-mass spectrum of the representative derivative [4] suggests its monomeric nature while the thermo-gravimetric curve shows its low thermal stability. Sol–gel transformations of the precursors (A), (1), and (4) yielded nano-sized ZnAl₂O₄ samples (a), (b) and (c) at ~500 °C, respectively. The XRD patterns of (a), (b) and (c) indicate formation of cubic phase nano-sized zinc aluminate in all the samples. Surface morphologies of these samples were investigated by SEM images. IR spectra as well as EDX analyses indicate formation of pure zinc aluminate in all the cases. TEM image of sample (c) shows spherical (~5–8 nm) morphology.     

Template-Free Hydrothermal Synthesis of Hollow α-FeOOH Urchin-Like Spheres and Their Conversion to α-Fe2O3 Under Low-Temperature Thermal Treatment in Air

Hollow α-FeOOH urchin-like spheres were synthesized by a simple hydrothermal method at 160 °C for 12 h and their thermal conversion to hollow α-Fe₂O₃ urchin-like spheres was performed at 300 °C for 2 h in air. The results from X-ray diffraction and electron microscopy analyses reveal that hollow α-FeOOH urchin-like spheres were completely transformed to hollow α-Fe₂O₃ urchin-like spheres without a significant morphological change. Also, the effect of hydrothermal treatment temperature (170–200 °C for 12 h) on the phase structure and morphology of the final product was investigated. Pure α-FeOOH, the mixture of α-FeOOH and α-Fe₂O₃, and pure α-Fe₂O₃ with different morphologies were obtained at <180, 180–190 and 200 °C, respectively. The obtained materials can be used in the photodegradation of organic pollutants under visible light irradiation.     

Hydrothermal and sonochemical synthesis of a nano-sized nickel(II) Schiff base complex as a precursor for nano-sized nickel(II) oxide; spectroscopic, catalytic and antibacterial properties

The Ni(II) complexes [Ni(L)₂](ClO₄)₂ (1) and [Ni(L)₂(NO₃)₂] (2), where L is the Schiff base ligand of 4,5,9,13,14-pentaaza-benzo[b] triphenylene, were synthesized and characterized by physico-chemical and spectroscopic methods. Nano-sized particles of (1) were prepared both by sonochemistry (3) and solvothermal (4) methods. NiO nanoparticles were obtained by calcination of the nano-structure complexes at 500 °C. The structures of the nano-sized compounds were characterized by X-ray powder diffraction and scanning electron microscopy. The thermal stabilities of the bulk complexes (1–2) and nano-sized particles (3–4) were studied by thermogravimetric and differential scanning calorimetry. The catalytic activities of complexes of (1–4) are reported. The free Schiff base and its Ni(II) complexes have been screened for antibacterial activities against three Gram-positive bacteria. The metal complexes are more active than the free Schiff base. Electrochemical studies show that the Ni complexes undergo irreversible reduction in MeCN solution.     

Tri- and tetraphenylantimony propiolates: Syntheses and structures

The reaction of triphenylantimony with propiolic acid in the presence of hydrogen peroxide (molar ratios 1 : 2 : 1 and 1 : 1 : 1) in diethyl ether affords triphenylantimony dipropiolate Ph₃Sb[OC(O)C≡CH]₂ (I) and μ₂-oxobis[(propiolato)triphenylantimony] [Ph₃SbOC(O)C≡CH]₂O (II). Tetraphenylantimony propiolate Ph₄SbOC(O)C≡CH (III) is synthesized from pentaphenylantimony and propiolic or acetylenedicarboxylic acid in toluene. According to the X-ray diffraction data, the crystals of compounds I and III include two types of crystallographically independent molecules (a and b). The antimony atoms in molecules Ia, Ib, II, IIIa, and IIIb have the trigonal-bipyramidal coordination mode with different degrees of distortion. The OSbO and OSbC axial angles are 176.8(2)° (Ia, Ib), 170.17(15)°, 178.78(14)° (II), and 173.2(5)°, 174.4(5)° (IIIa, IIIb). The CSbC equatorial angles lie in the ranges 108.2(3)°–143.1(3)° (I), 109.0(2)°–131.0(2)° (II), and 113.1(4)°–125.4(4)° (III). The SbOSb angle in II is 141.55(19)°. The Sb-C bond lengths are 2.103(8)–2.141(5) (I), 2.105(5)–2.119(5) (II), and 2.076(12)–2.166(13) Å (III). The Sb-O distances increase in a series of I, II, and III: 2.139(6)–2.156(7) (Ia, Ib); 2.206(4), 2.218(3) (II); and 2.338(10), 2.340(10) Å (III).     

Thermal decomposition of some silver(I) carboxylates under nitrogen atmosphere

The thermal decomposition reactions of CH₃CH₂C(CH₃)₂COOAg (1), (CH₃)₃SiCH₂COOAg (2), CF₃COOAg (3), (CH₃)₃CCOOAg (4), C₂H₅COOAg (5), C₃F₇COOAg (6), C₆F₁₃COOAg (7) and (CF₂)₃(COOAg)₂ (8) were studied in N₂ atmosphere using thermogravimetry (TG), derivative thermogravimetry and differential thermal analysis. Characterized compounds decomposed in one- or multi-step processes with metallic silver formation in the range 215–465 °C. TG-IR studies of gases evolved during thermolysis revealed products of decomposition, such as carboxylic acids, CO₂ and recombination reactions.     

The structure and thermal properties of novel DOPO-containing 1,3-benzoxazines

Three DOPO (9,10-dihydro-9-oxa-10-phospha-phenanthrene-10-oxide)-containing benzoxazin (3a–3c) were successfully prepared from 2-hydroxybenzaldehyde, p-substituted aniline, and DOPO by a three-step procedure. Since the phosphorus and the adjacent aliphatic carbon are both chiral centers, two pairs of enantiomers exist in 3a, 3b, or 3c. Compound 3a′, which is a pair of enantiomers existing in 3a, was isolated using recrystallization in ethyl acetate solvent. All the structures were confirmed by FT-IR, NMR, and MS spectra. The X-ray analysis indicated that the 3a′ is the RR/SS enantiomers and belongs to the monoclinic crystal system, its space group being P2₁/c. The thermal properties were investigated by DSC and TG. It has been found that the peak temperature of thermally induced ring-opening reaction was around 260–270 °C. Compounds (3a–3c, 3a′, and 3c′) had two similar thermal processes from 50 to 600 °C in TG, whereas the compound 3b′ had three thermal processes. The char yields of 3a–3c were 18.10, 16.84, and 16.34 %, respectively, while those of 3a′–3c′ were 26.00, 31.80, and 19.21 %, respectively. The results indicated that compounds 3a′–3c′ had better char properties than 3a–3c.     

Thermal studies and decomposition kinetics of alkaline earth metal trichloroacetates

Alkaline earth metal trichloroacetates M(O₂CCCl₃)₂·nH₂O, where M = Be (1), n = 4; M = Mg (2), n = 6; M = Ca (3) or Sr (4) or Ba (5), n = 4, were synthesized and their thermal behavior analyzed using thermogravimetric analysis (TG/DTG/DSC). A critical examination was made for the apparent activation energy by means of non-isothermal kinetic methods employing multiple heating rates. A systematic and comparative study of thermal decomposition was carried out at different heating rates i.e., 5, 10, 15, and 20 °C min^?1 for various trichloroacetates synthesized. It was observed that the Ca, Sr, and Ba trichloroacetates decompose preferentially to respective metal halides while Be and Mg compounds decompose to metal and metal oxide, respectively. The composition of the final residues was also confirmed using FT-IR spectroscopy. The activation energy follows the order: Mg > Ca > Sr > Ba, Be being the exception. Results reveal that each metal trichloroacetate decomposes through its unique thermolysis mechanism.     

Cobalt(II) and silver(I) coordination polymers constructed from flexible bis(5,6-dimethylbenzimidazole) and substituted isophthalate co-ligands

Two coordination polymers, [Co(L1)(IPA] _n (1) and {[Ag(L2)(HMIPA)]·H₂O} _n (2) (H₂IPA = isophthalic acid, L1 = 1,2-bis(5,6-dimethylbenzimidazol-1-ylmethyl)benzene, H₂MIPA = 5-methylisophthalic acid, L2 = 1,6-bis(5,6-dimethylbenzimidazol-1-yl)hexane, have been synthesized and characterized by physicochemical and spectroscopic methods, as well as single-crystal X-ray diffraction. In 1, six-coordinated cobalt centers are bridged by L1 and IPA^2? ligands to generate a (4,4) two-dimensional layer. However, complex 2 features a 1D chain structure, which is further extended by O–H···O hydrogen bonding interactions into a 2D supramolecular layer with (6³) topology. The fluorescence and thermal gravimetric analysis of both complexes were also explored. Furthermore, the complexes 1 and 2 exhibit remarkable catalytic properties for the degradation of methyl orange dyes in a Fenton-like process.     

Synthesis and molecular and crystal structures of binuclear complexes of Sm(III), Eu(III), Gd(III), Tb(III), and Dy(III) nitrates with 4,4,10,10-tetramethyl-1,3,7,9-tetraazospiro[5.5]undecane-2,8-dione

Binuclear complexes of Sm(III), Eu(III), Gd(III), Tb(III), and Dy(III) nitrates with 4,4,10,10-tetramethyl-1,3,7,9-tetraazospiro[5.5]undecane-2,8-dione (C₁₁H₂₀N₄O₂, SC)—[Sm(NO₃)₃(SC)(H₂O)]₂(I), [Eu(NO₃)₃(SC)(H₂O)]₂ (II), [Gd(NO₃)₂(SC)(H₂O)₃)]₂(NO₃)₂ (III), [Tb(NO₃)₃(SC)(H₂O)]₂ (IV), [Dy(NO₃)₃(SC)(H₂O)]₂ (V), are synthesized, and their X-ray diffraction analyses are carried out. The crystals of complexes I–V are monoclinic: space group P2₁/n for III and P2₁/c for I, II, IV, and V. In centrosymmetric coordination complexes II, III, IV, and V, the Ln atoms are coordinated by two O(1) and O(2) atoms of two molecules of the SC ligands bound by a symmetry procedure (1 ? x, ?y, 1 ? z), three bidentate nitrate anions, and a water molecule. The coordination numbers of the metal atoms are equal to 9, and the coordination polyhedra are considerably distorted three-capped trigonal prisms, whose bases include the O(1), O(2), O(12) and O(3), O(7), O(9) atoms. The dihedral angle between the bases of the prism is 18°, and that between the mean planes of the side faces is 55°–71° for I, 17° and 55°–71° for II, 16° and 55°–70° for IV, and 16° and 55°–70° for V. The Sm...Sm distance in complex I is 9.44 Å, Eu...Eu in II is 9.42 Å, Tb...Tb in IV is 9.36Å, and Dy...Dy in V is 9.36Å. The gadolinium atom in complex III is coordinated by two oxygen atoms of two ligand molecules bound by a symmetry procedure (?x, ?y + 1, ?z + 1), two bidentate nitrate anions, and three water molecules. One of the nitro groups in compound III is localized in the external coordination sphere of the metal. The coordination number of gadolinium is 9, and the coordination polyhedron is a significantly distorted three-capped trigonal prism, whose base includes the O(1), O(2), O(7) and O(4), O(5), O(9) atoms. The dihedral angle between the bases of the prism is 22.8°, and that between the mean planes of the side faces is 53°–72°. The Gd...Gd distance in complex III is 9.17 Å.     

Controlling the photochemical reactions of alkenes by light-path length effects of a microchannel reactor

Photoirradiation of Me₂CO–H₂O solution of pent-4-en-1-ol (1a) with a high-pressure mercury lamp in a test tube gave 8-hydroxyoctan-2-one (3a) in 66 % yield along with oxetane (4a) and the isomer (4a′) in 10 % yield. Irradiation of the running Me₂CO–H₂O solution of 1a in the flow system of a microchannel reactor (MCR) gave mainly 4a. The photoreaction of 1,1-diphenylethene (2a) with triethylamine gave a Markovnikov-type adduct (5a) and an anti-Markovnikov-type adduct (6a). The use of the MCR enhanced the production of 5a. These phenomena were explained by the light-path length effects of the MCR.     

Two palladium(II) complexes based on Schiff base ligands: synthesis, characterization, luminescence, and catalytic activity

Two Pd(II) complexes involving Schiff base ligands, namely, [Pd(L1)₂] (1), [Pd₂(L₂)Cl₂] (2) [HL1 = 2-((2,6-diisopropylphenylimino)methyl)-4,6-dibromophenol, L2 = N-(4-isopropylbenzylidene)-2,6-diisopropylbenzenamine] have been synthesized using solvothermal methods and characterized by elemental analysis, IR-spectroscopy, thermogravimetric analysis, powder X-ray diffraction, UV–vis absorption spectra, and single-crystal X-ray diffraction. Complex 1 is a mononuclear cyclometalated Pd(II) complex, whereas complex 2 is a μ-chloro-bridged dinuclear. Both 1 and 2 display photoluminescence in the solid state at 298 K and possess fluorescence lifetimes (τ ₁ = 86.40 ns, τ ₂ = 196.21 ns, τ ₃ = 1,923.31 ns at 768 nm for 1, τ ₁ = 69.92 ns, τ ₂ = 136.40 ns, τ ₃ = 1,714.26 ns at 570 nm for 2). The Suzuki reactions of 4-bromotoluene with phenylboronic acid by complexes 1–2 have also been studied.     

Complexes built with a scorpion-type tripodal ligand and metal ions: syntheses, structural features, electrochemical properties and magnetic properties

The complexes [Fe(bpz*mpy)₂](ClO₄)₂ (1a), [Cu(bpz*mpy)₂](ClO₄)₂ (1b) and [Ag(bpz*mpy)(Ph₃P)](ClO₄) · H₂O (2) (bpz*mpy = pyridin-2-yl-bis(3,5-dimethylpyrazol-1-yl)methane) have been synthesized and characterized by physicochemical and spectroscopic methods. X-ray crystallographic analysis reveals that the central Fe^II and Cu^II ions in complexes 1a and 1b are located on a twofold rotation axis and have a distorted octahedral coordination sphere, while the Ag^I center in complex 2 is tetrahedrally coordinated. The electrochemical properties of complex 1b have been investigated. Furthermore, a variable temperature magnetic susceptibility study of complex 1a has also been performed over the measured temperature range 2–300 K.