Evaporation of water droplets on "lock-and-key" structures with nanoscale features

Highly ordered poly(dimethylsiloxane) microbowl arrays (MBAs) and microcap arrays (MCAs) with "lock-and-key" properties are successfully fabricated by self-assembly and electrochemical deposition. The wetting properties and evaporation dynamics of water droplets for both cases have been investigated. For the MBAs case, the wetting radius of the droplets remains unchanged until the portion of the droplet completely dries out at the end of the evaporation process. The pinning state extends for more than 99.5% of the total evaporation time, and the pinning-shrinking transition is essentially prevented whereas in the case of the MCAs the contact radius exhibits distinct stages during evaporation and the contact line retreats significantly in the middle of the evaporation process. We explain the phenomenon by a qualitative energy balance argument based on the different shrinkage types of the nanoscale-folded contact line.     

Relationship Between Molecular Structure,Single crystal Packing and Self-Assembly Behavior: A Case Based on Pyrene Imide Derivatives

Development of new n-type one-dimensional (1D) self-assembly nanostructure and a clear understanding of the relationship between molecular structure and self-assembly behavior are important prerequisites for further designing and optimizing organic optoelectronic nanodevice. In this article, a series of n-type organic semiconductor materials based on pyrene imide were successfully synthesized through [4+2] cycloaddition reactions and their preliminary optical and electrochemical properties were studied. The simulated HOMO-LUMO bandgaps via DFT tallied with the experimental data well. The self-assembly of these materials showed needle or fiber-like morphologies, indicating that different conjugation degree or alkyl group had significant influence on their self-assembly behaviors. Furthermore, the single-crystal packing for these molecules were analyzed and it was found out that the changes of conjugated backbone and functional group would affect certain crystal lattice parameter significantly, such as the intermolecular packing distance and crystal size etc, which would further result in different self-assembly morphology.     

Supramolecular squares of porphyrazines

The design, self-assembly, and characterization of discrete arrays of porphyrazine (Pz) squares are presented to illustrate the supramolecular chemistry of these macrocycles, and to highlight that these arrays have physical chemical properties that are different from similar arrays of porphyrinic systems.     

On one-dimensional self-assembly of surfactant-coated nanoparticles

Nanometer-sized metal and semiconductor particles possess novel properties. To fully realize their potential, these nanoparticles need to be fabricated into ordered arrays or predesigned structures. A promising nanoparticle fabrication method is coupled surface passivation and self-assembly of surfactant-coated nanoparticles. Due to the empirical procedure and partially satisfactory results, this method still represents a major challenge to date and its refinement can benefit from fundamental understanding. Existing evidences suggest that the self-assembly of surfactant-coated nanoparticles is induced by surfactant-modified interparticle interactions and follows an intrinsic road map such that short one-dimensional (1D) chain arrays of nanoparticles occur first as a stable intermediate before further assembly takes place to form higher dimensional close-packed superlattices. Here we report a study employing fundamental analyses and Brownian dynamics simulations to elucidate the underlying pair interaction potential that drives the nanoparticle self-assembly via 1D arrays. We find that a pair potential which has a longer-ranged repulsion and reflects the effects of surfactant chain interdigitation on the dynamics is effective in producing and stabilizing nanoparticle chain arrays. The resultant potential energy surface is isotropic for dispersed nanoparticles but becomes anisotropic to favor the growth of linear chain arrays when self-assembly starts.     

Freestanding mesoporous quasi-single-crystalline CO3O4 nanowire arrays

We report a facile template-free method for the large-area growth of freestanding hollow Co3O4 nanowire arrays on a variety of substrates including transparent conducting glass, Si wafer, and copper foil, et al. These nanowires have the interesting combined properties of mesoporosity and quasi-single-crystallinity. With their high surface area and crystallinity, and their direct growth on conductive substrate, these Co3O4 nanowire arrays will have promising applications in lithium-ion batteries, chemical sensing, and field-emission and electrochromic devices. Using the prepared nanowire arrays as electrode, an electrochemical sensor for hydrogen peroxide sensing has been demonstrated.     

SERS,AFM and Electrochemical Characterization of Metal Nanorod and Nanowire Arrays

Metal nanowires (nanorods) have novel properties and potential applications in a wide field^[1]. Many two-dimensional nanowire arrays of semiconductors and metals with different diameter and length have been made using template synthesis method^[2]. The nanorod arrays of various metals (e.g., Cu, Ag,Au, Ni and Co) with different diameters from about 15 nm to 130 nm were fabricated by electrodeposition of the metals into the highly ordered nanochannel arrays in alumina film followed by partial removal of the film in phosphoric acid or sodium hydroxide. In the present work, surface-enhanced Raman spectroscopy (SERS), AFM and electrochemical methods have been used to characterize the metal nanorod (nanowire) arrays. Tapping mode AFM and SERS were performed on Nanoscope Ⅲa (Digital Instruments) and on confocal Raman microscopy (LabRam I,Dilor) respectively.     

Fabrication and Optical and Electrical Properties of Poly(2,5-di-n-butoxyphenylene) Nanowire Arrays

Regular patterned arrays of nanomaterials have been widely fabricated and studied for their benefits in construction of novel type of optical, electron and magnetic device1-2, these kinds of devices center on the inorganic materials. With the development of synthesis and application of new type of polymer material, the design and construction of organic nanopolymer have become a great interest. Poly(p-phenylene)(PPP) and some derivatives have been widely investigated as a candidate for high strength, high temperature and conducting polymers, and can be used as electrode materials in electrochemical cells, blue emitting diodes: The polymers obtained by oxidative coupling polymerization of benzene nuclei with aluminum chloride and copper(Ⅱ) chloride is insoluble in all solvent and inflexible, which hinders revealing their basic properties. Introduction of flexible side chains into the aromatic rings can not only render solubility and processibility, but also improve or modify optical and electrical properties of the polymers. As a further step in assembling method and optoelectronic studies, it is attractive to investigate the properties of photoluminescence and electroluminescene of regular patterned arrays of poly(p-phenylene) deriva-tives nanowires.     

A Review on Gold Nanotriangles: Synthesis,Self-Assembly and Their Applications

Gold nanoparticles (AuNPs) with interesting optical properties have attracted much attention in recent years. The synthesis and plasmonic properties of AuNPs with a controllable size and shape have been extensively investigated. Among these AuNPs, gold nanotriangles (AuNTs) exhibited unique optical and plasmonic properties due to their special triangular anisotropy. Indeed, AuNTs showed promising applications in optoelectronics, optical sensing, imaging and other fields. However, only few reviews about these applications have been reported. Herein, we comprehensively reviewed the synthesis and self-assembly of AuNTs and their applications in recent years. The preparation protocols of AuNTs are mainly categorized into chemical synthesis, biosynthesis and physical-stimulus-induced synthesis. The comparison between the advantages and disadvantages of various synthetic strategies are discussed. Furthermore, the specific surface modification of AuNTs and their self-assembly into different dimensional nano- or microstructures by various interparticle interactions are introduced. Based on the unique physical properties of AuNTs and their assemblies, the applications towards chemical biology and sensing were developed. Finally, the future development of AuNTs is prospected.     

Directing the Self-Assembly of Aromatic Foldamer Helices using Acridine Appendages and Metal Coordination

Folded molecules provide complex interaction interfaces amenable to sophisticated self-assembly motifs. Because of their high conformational stability, aromatic foldamers constitute suitable candidates for the rational elaboration of self-assembled architectures. Several multiturn helical aromatic oligoamides have been synthesized that possess arrays of acridine appendages pointing in one or two directions. The acridine units were shown to direct self-assembly in the solid state via aromatic stacking leading to recurrent helix-helix association patterns under the form of discrete dimers or extended arrays. In the presence of Pd(II), metal coordination of the acridine units overwhelms other forces and generates new metal-mediated multihelical self-assemblies, including macrocycles. These observations demonstrate simple access to different types of foldamer-containing architectures, ranging from discrete objects to 1D and, by extension, 2D and 3D arrays.     

Synthesis, crystal structures, and electronic properties of nonlinear fused thienoacene semiconductors

Two fused thienoacene compounds with two-dimensional ring connectivity were synthesized, and their semiconducting properties were characterized. Both compounds have a crystal structure comprised of herringbone arrays of tight π-π stacks. Strong π-π interactions lead to self-assembly into well-defined crystalline thin films from the vapor phase for both compounds. Field effect transistors were fabricated, affording identical hole mobilities of 3.0 × 10(-3) cm(2)/(V s) and I(on/off) > 10(5).     

Synthesis, self-assembly, and characterization of supramolecular polymers from electroactive dendron rodcoil molecules

We report here the synthesis and self-assembly of a series of three molecules with dendron rodcoil architecture that contain conjugated segments of oligo(thiophene), oligo(phenylene-vinylene), and oligo(phenylene). Despite their structural differences, all three molecules yield similar self-assembled structures. Electron and atomic force microscopy reveals the self-assembly of the molecules into high aspect ratio ribbon-like nanostructures which at low concentrations induce gelation in nonpolar solvent. Self-assembly results in a blue-shifted absorption spectrum and a red-shifted, quenched fluorescence spectrum, indicating aggregation of the conjugated segments within the ribbon-like structures. The assembly of these molecules into one-dimensional nanostructures is a route to pi-pi stacked supramolecular polymers for organic electronic functions. In the oligo(thiophene) derivative, self-assembly leads to a 3 orders of magnitude increase in the conductivity of iodine-doped films due to self-assembly. We also found that electric field alignment of these supramolecular assemblies can be used to create arrays of self-assembled nanowires on a device substrate.     

Giant porphyrin disks: control of their self-assembly at liquid-solid interfaces through metal-ligand interactions

The synthesis and self-assembly behaviour of porphyrin dodecamers 1H(2) and Zn-1, which consist of twelve porphyrins that are covalently attached to a central aromatic core, is described. According to STM, 1D and 2D NMR studies, and molecular modelling calculations, the porphyrin dodecamers have a yo-yo-shaped structure. Their large pi surface, in combination with their disk-like shape, allows them to form self-assembled structures, which in the case of Zn-1 can be tuned by adding bidentate ligands. The self-assembly of the molecules at the liquid-solid interface of 1-phenyloctane with highly oriented pyrolytic graphite or Au(111) was imaged by using STM. The porphyrin disks in the self-assembled arrays have an edge-on orientation on the surface. The addition of bidentate axial ligands to the Zn-1 molecules in the arrays allows their intermolecular distance to be precisely controlled.     

Design, synthesis, characterization, luminescence and non-linear optical (NLO) properties of multinuclear platinum(II) alkynyl complexes

A series of luminescent multinuclear platinum(II) alkynyl complexes containing triethynylbenzene or 1,4-bis(3,5-diethynylphenyl)buta-1,3-diyne as cores has been successfully synthesized and characterized. The electronic absorption, emission, nanosecond transient absorption and electrochemical properties of these complexes have been reported. These complexes show long-lived emissions in degassed benzene solution and in alcoholic glass at 77 K. Moreover, they are found to exhibit two-photon absorption (2PA) and two-photon induced luminescence (TPIL) properties, and their two-photon absorption cross-sections have been determined to be 6-191 GM upon excitation at 720 nm. Through a systematic comparison, it has been found that tetra- and hexanuclear platinum(II) complexes show better 2PA and TPIL properties than their di- and trinuclear counterparts.     

Synthesis of a new family of hexakisferrocenyl hexagons and their electrochemical behavior

The design and synthesis of two new hexakisferrocenyl hexagons has been achieved via coordination-driven self-assembly wherein the size and relative distribution of six ferrocene moieties has been precisely controlled. Insight into the structure and electronic properties of these supramolecules was obtained through electrochemical studies.     

Multidentate,V-Shaped Pyridine Building Blocks as Tectons for Crystal Engineering

The formation of supramolecular structural units through self-assembly is a powerful method to design new architectures and materials endowed with specific properties. With the aim of adding a group of versatile tectons to the toolkit of crystal engineers, we have devised and synthesised four new V-shaped building blocks characterised by an aryl acetylene scaffold comprising three substituted pyridine rings connected by two triple bonds. The judicious choice of different substituents on the pyridine rings provides these tectons with distinctive steric, electrostatic and self-assembly properties, which influence their crystal structures and their ability to form co-crystals. Co-crystals of the tectons with tetraiododifluorobenzene were obtained both via traditional and mechanochemical crystallisation strategies, proving their potential use in crystal engineering. The energetic contributions of the supramolecular interactions at play in the crystal lattice have also been evaluated to better understand their nature and strength and to rationalise their role in designing molecular crystals.     

Enhanced functionality for donor-acceptor oligothiophenes by means of inclusion of BODIPY: synthesis, electrochemistry, photophysics, and model chemistry

We have synthesized several new push-pull oligothiophenes based on the boron dipyrromethene (BODIPY) moiety as the electron acceptor and the more well-known oligothiophenes substituted with N,N-dialkylamino functions to enhance their electron-donor ability. A complete characterization of the electronic properties has been carried out; it consists of their photophysical, electrochemical, and vibrational properties. The compounds have been studied after chemical treatment with acids and after oxidation. In this regard, they can be termed as NIR dyes and amphoteric redox electroactive molecules. We have described the presence of dual fluorescence in these molecules and fluorescence quenching either by energy transfer or, in the push-pull molecules, by electron exchange. The combination of electrochemical and proton reversibility along with the interesting optical properties of the new species offer an interesting platform for sensor and material applications.     

Design and construction of endo-functionalized multiferrocenyl hexagons via coordination-driven self-assembly and their electrochemistry

The construction of a new family of endo-functionalized multiferrocenyl hexagons with various sizes via coordination-driven self-assembly is described. The structures of these novel metallacycles, containing several ferrocenyl moieties at their interior surface, are characterized by multinuclear NMR ((31)P and (1)H) spectroscopy, cold-spray ionization mass spectrometry (CSI-TOF-MS), elemental analysis, and molecular modeling. Insight into the structural and electrochemical properties of these endo-functionalized multiferrocenyl hexagons was obtained through cyclic voltammetry investigation.     

TiO2纳米管阵列制备及其电化学嵌锂性能研究

本文研究了TiO2纳米管阵列制备及其嵌锂电化学性能.采用阳极氧化法制备了TiO2纳米管阵列.利用XRD、SEM、恒电流充放电、CV、EIS等手段.对所制备TiO2纳米管阵列的结构、形貌进行了分析表征及电化学性能测试.实验结果表明,制备出的TiO2纳米管阵列薄膜具有很好的循环性能.首次嵌锂容量达73.3 μAh·cm-2...     

Supramolecular 'flat' Mn9 grid complexes--towards functional molecular platforms

Flat, quantum dot like arrays of closely spaced, electron rich metal centres are seen as attractive subunits for device capability at the molecular level. Mn(II)9 grids, formed by self-assembly processes using 'tritopic' pyridine-2,6-dihydrazone ligands, provide easy and pre-programmable routes to such systems, and have been shown to exhibit a number of potentially useful physical properties, which could be utilized to generate bi-stable molecular based states. Their ability to form surface monolayers, which can be mapped by STM techniques, bodes well for their possible integration into nanometer scale electronic components of the future. This report highlights some new Mn(II)9 grids, with functionalized ligand sites, that may provide suitable anchor points to surfaces and also be potential donor sites capable of further grid elaboration. Structures, magnetic properties, electrochemical properties, surface studies on HOPG (highly ordered pyrolytic graphite), including the imaging of individual metal ion sites in the grid using CITS (current imaging tunneling spectroscopy) are discussed, in addition to an analysis of the photophysics of a stable mixed oxidation state [Mn(III)4Mn(II)5] grid. The grid physical properties as a whole are assessed in the light of reasonable approaches to the use of such molecules as nanometer scale devices.     

Ordered nickel oxide nanowire arrays and their optical absorption properties

Ordered NiO nanowire arrays embedded in anodic alumina membranes have been prepared by using an electrochemical deposition method. After annealing at 300 °C, the NiO nanowire arrays were characterized using SEM, TEM, SAED, and XRD. SEM and TEM observations reveal that these nanowires are dense, continuous and arranged roughly parallel to one another. XRD and SAED analysis together indicate that these NiO nanowires crystallize with a polycrystalline structure. The optical absorption band gap of NiO nanowire arrays is 3.74 eV, and no obvious blue shift or red shift with respect of that of the bulk NiO can be observed.