Spectroscopy and rectification of three donor-sigma-acceptor compounds, consisting of a one-electron donor (pyrene or ferrocene), a one-electron acceptor (perylenebisimide), and a C19 swallowtail

We report spectroscopic characterization and unimolecular rectification (asymmetric electrical conduction) measurements of three donor-sigma-acceptor (D-sigma-A) compounds N-(10-nonadecyl)-N-(1-pyrenylmethyl)perylene-3,4,9,10-bis(dicarboximide) (1), N-(10-nonadecyl)-N-(4-[1-pyrenyl]butyl)perylene-3,4,9,10-bis(dicarboximide) (2), and N-(10-nonadecyl)-N-(2-ferrocenylethyl)perylene-3,4,9,10-bis(dicarboximide) (3). These molecules were arranged as one-molecule thick Langmuir-Blodgett monolayers between Au electrodes. In such an "Au | D-sigma-A | Au" sandwich, molecule 1 is a unimolecular rectifier, with rather small rectification ratios (between 2 and 3 at +/-1 V) that decrease upon cycling. Molecule 2 does not rectify. Molecule 3 rectifies, with a rectification ratio of between 14 and 28 at +/-1 V; the through-film rectification and currents persist, even with scans of +/-2 V, for up to 40 cycles of measurement. Qualitative arguments, based on a two-level rectification mechanism, are consistent with the current asymmetries observed in the monolayers of 1 and 3.     

Organic rectifying junctions fabricated by ionic coupling

Ionically-assembled structures that comprise discrete layers of cationic acceptors (4,4'-bipyridinium) and anionic donors (copper phthalocyanine-3,4',4',4'-tetrasulfonate) exhibit asymmetric current-voltage (I-V) characteristics with high rectification ratios of 60-100 at +/-1 V.     

Molecules that mimic Schottky diodes

Self-assembled monolayers of cationic donor-(pi-bridge)-acceptor dyes coupled with anionic donors exhibit asymmetric current-voltage (I-V) characteristics when contacted by Au or PtIr probes. Rectification ratios of 3000 at +/- 1 V are obtained from Au-S-C10H20-A+-pi-D|D-|Au structures in which the cationic moiety is 5-(4-dimethylaminobenzylidene)-5,6,7,8-tetrahydro-isoquinolinium and the counterion is copper phthalocyanine-3,4',4',4'-tetrasulfonate (SAM ). Similar behaviour, with a high rectification ratio of 700-900 at +/- 1 V, is also obtained for the CuPc(SO3-)4 salt of 4-[2-(4-dimethylaminonaphthalen-1-yl)-vinyl]-quinolinium (SAM ). The properties are dependent upon the D-pi-A+ moieties which, for these highly rectifying salts, have sterically locked non-planar structures causing the conjugation to be effectively broken. Its effect on the electrical asymmetry is less spectacular when the cationic species is sterically unhindered: the rectification ratio decreases to 15-70 at +/- 1 V for films of the 4-[2-(4-dimethylaminophenyl)-vinyl]-pyridinium salt (SAM ), which has single-ring substituents on opposite sides of the -CH=CH- bridge and an almost planar D-pi-A+ structure. Rectification ratios from the sterically hindered structures are on a par with electrical asymmetries from metal-insulator-metal (MIM) devices where oxide-induced Schottky barriers dominate the behaviour.     

Highly efficient alkene epoxidation and aziridination catalyzed by iron(II) salt + 4,4',4'-trichloro-2,2':6',2'-terpyridine/4,4'-dichloro-4'-O-PEG-OCH3-2,2':6',2'-terpyridine

"Iron(II) salt + 4,4',4'-trichloro-2,2':6',2'-terpyridine" is an effective catalyst for epoxidation and aziridination of alkenes and intramolecular amidation of sulfamate esters. The epoxidation of allylic-substituted cycloalkenes achieved excellent diastereoselectivities up to 90%. ESI-MS results supported the formation of iron-oxo and -imido intermediates. Derivitization of Cl 3terpy to O-PEG-OCH 3-Cl 2terpy renders the terpyridine unit to be recyclable, and the "iron(II) salt + 4,4'-dichloro-4'- O-PEG-OCH 3-2,2':6',2'-terpyridine" protocol can be reused without a significant loss of catalytic activity in the alkene epoxidation.     

Elastic and inelastic electron tunneling spectroscopy of a new rectifying monolayer

Rectification of electrical current was observed in a Langmuir-Schaefer monolayer of fullerene-bis[ethylthio-tetrakis(3,4-dibutyl-2-thiophene-5-ethenyl)-5-bromo-3,4-dibutyl-2-thiophene] malonate, Au electrodes at room temperature (there are two regimes of asymmetry, at lower bias, i.e., between 0 and +/-2 V, and at higher bias), and also between Pb and Al electrodes at 4.2 K. The latter experiment was coupled with second harmonic detection of the second derivative of the current with respect to voltage (d2I/dV2). The d2I/dV2 spectrum shows intramolecular vibrations, and also two antisymmetric broad bands, centered at +/-0.65 V, due to resonant electron tunneling between the Fermi level(s) of the electrodes and the lowest unoccupied molecular orbital of the molecule.     

碳纳米管-聚(3',4'-亚乙基二氧-2,2':5',2"-三噻吩)复合材料的制备及其电化学性能研究

通过Stille反应合成了3',4'-亚乙基二氧-2,2':5',2"-三噻吩(TET),并以其作为单体,采用化学氧化原位聚合方法在碳纳米管(CNT)的表面包覆新型聚(3',4'-亚乙基二氧.2,2':5',2"-三噻吩)(FTET),制备了PTET-CNT纳米复合材料.通过TEM、SEM和IR对其进行了表征,并利用循环伏安、交流阻抗、恒电流充放电等电化学测试方法,比较研究了复合材料以及碳纳米管在0.1 mol/L四乙基四氟硼酸铵(Et_4NPF_4)的乙腈溶液中的电化学行为.实验结果表明,在电流密度为3 mA/cm~2时,PTET-CNT复合材料的比电容为86 F/g,比原碳纳米管比电容20 F/g提高了3.3倍.基于这种复合材料的电容器的能量密度达到2.02 Wh/kg.     

A molecular half-wave rectifier

This paper describes the performance of junctions based on self-assembled monolayers (SAMs) as the functional element of a half-wave rectifier (a simple circuit that converts, or rectifies, an alternating current (AC) signal to a direct current (DC) signal). Junctions with SAMs of 11-(ferrocenyl)-1-undecanethiol or 11-(biferrocenyl)-1-undecanethiol on ultraflat, template-stripped Ag (Ag(TS)) bottom electrodes, and contacted by top electrodes of eutectic indium-gallium (EGaIn), rectified AC signals, while similar junctions based on SAMs of 1-undecanethiol-SAMs lacking the ferrocenyl terminal group-did not. SAMs in these AC circuits (operating at 50 Hz) remain stable over a larger window of applied bias than in DC circuits. AC measurements, therefore, can investigate charge transport in SAM-based junctions at magnitudes of bias inaccessible to DC measurements. For junctions with SAMs of alkanethiols, combining the results from AC and DC measurements identifies two regimes of bias with different mechanisms of charge transport: (i) low bias (|V| < 1.3 V), at which direct tunneling dominates, and (ii) high bias (|V| > 1.3 V), at which Fowler-Nordheim (FN) tunneling dominates. For junctions with SAMs terminated by Fc moieties, the transition to FN tunneling occurs at |V| ≈ 2.0 V. Furthermore, at sufficient forward bias (V > 0.5 V), hopping makes a significant contribution to charge transport and occurs in series with direct tunneling (V ? 2.0 V) until FN tunneling activates (V ? 2.0 V). Thus, for Fc-terminated SAMs at forward bias, three regimes are apparent: (i) direct tunneling (V = 0-0.5 V), (ii) hopping plus direct tunneling (V ≈ 0.5-2.0 V), and (iii) FN tunneling (V ? 2.0 V). Since hopping does not occur at reverse bias, only two regimes are present over the measured range of reverse bias. This difference in the mechanisms of charge transport at forward and reverse bias for junctions with Fc moieties resulted in large rectification ratios (R > 100) and enabled half-wave rectification.     

Current rectification by asymmetric molecules: an ab initio study

Current rectification effect in an asymmetric molecule HCOO-C6H4-(CH2)n sandwiched between two aluminum electrodes has been studied using an ab initio nonequilibrium Green's function method. The conductance of the system decreases exponentially with the increasing number n of CH2. The phenomenon of current rectification is observed such that a very small current appears at negative bias and a sharp negative differential resistance at a critical positive bias when n>or=2. The rectification effect arises from the asymmetric structure of the molecule and the molecule-electrode couplings. A significant rectification ratio of approximately 38 can be achieved when n=5.     

Mechanism of rectification in tunneling junctions based on molecules with asymmetric potential drops

This paper proposes a mechanism for the rectification of current by self-assembled monolayers (SAMs) of alkanethiolates with Fc head groups (SC(11)Fc) in SAM-based tunneling junctions with ultra-flat Ag bottom electrodes and liquid metal (Ga(2)O(3)/EGaIn) top electrodes. A systematic physical-organic study based on statistically large numbers of data (N = 300-1000) reached the conclusion that only one energetically accessible molecular orbital (the HOMO of the Fc) is necessary to obtain large rectification ratios R ≈ 1.0 × 10(2) (R = |J(-V)|/|J(V)| at ±1 V). Values of R are log-normally distributed, with a log-standard deviation of 3.0. The HOMO level has to be positioned spatially asymmetrically inside the junctions (in these experiments, in contact with the Ga(2)O(3)/EGaIn top electrode, and separated from the Ag electrode by the SC(11) moiety) and energetically below the Fermi levels of both electrodes to achieve rectification. The HOMO follows the potential of the Fermi level of the Ga(2)O(3)/EGaIn electrode; it overlaps energetically with both Fermi levels of the electrodes only in one direction of bias.     

Condensed Thienopyrimidines. 14. Synthesis of 10H-Thiopyrano[4',3':4',5']thieno[2',3':4,5]pyrimido[2,3-c]-1,2,4-triazines

Reaction of a substituted 2-aminothienothiopyran with methyl(phenyl) isothiocyanate, intramolecular cyclization of the obtained N'-methyl(phenyl) thioureido derivatives, and work up of the cyclization products with hydrazine hydrate gave 2-hydrazinodihydrothiopyranothienopyrimidines. Treatment of the latter with pyruvic acid gave the novel 10H-thiopyrano[4',3':4',5']thieno[2',3':4,5]pyrimido[2,3-c]-1,2,4-triazines.     

酰氨基硫脲及相关杂环衍生物的研究XXIX: 2-(3'-溴苯胺基)-5-[5'-氨基-1'-(4"-氯苯基)-1',2',3'-三唑-4'-基]-1,3,4-噻二唑的晶体结构

经1-[5'-氨基-1'-(4"-氯苯基)-1',2',3'-三唑-4'-甲酰基]-4-(3'-溴苯基)-3-氨基硫脲在浓硫酸作用下制得2-(3'-溴苯胺基)-5-[5'-氨基-1'-(4"-氯苯基)-1',2',3'-三唑-4'-基]-1,3,4-噻二唑化合物。该化合物的晶体结构经X射线衍射分析确定, 化合物属三斜晶系, P1空间群, a=1.1784(2), b=1.4455(2),c=1.1353(1)nm; α=100.68(1), β=109.50(1), γ=79.89(1)°; V=1.7779nm^3; 分子式C~1~6H~1~1BrClN~7S, Mr=448.75; Dc=1.673g/cm^3, Z=4,μ=58.16cm^-^1, 最终偏离因子R=0.084, Rw=0.086。分析化合物的键长, 键角数据表明, 该分子具有离域π键结构。     

Synthesis and single-crystal X-ray characterization of 4,4"-functionalized 4'-(4-bromophenyl)-2,2':6',2"-terpyridines

To expand the utility of bis(terpyridine) metal connectivity, the selective symmetrical and unsymmetrical 4,4"-functionalization (-CN, -Me, -CO2Me) of 4'-(4-bromophenyl)-2,2':6',2"-terpyridines was achieved using the Kr?hnke synthesis. The final substituted 2,2':6',2"-terpyridines along with their corresponding intermediates, 4a-c, were recrystallized and characterized by 1H NMR and 13C NMR as well as X-ray crystallography; COSY correlations were also conducted to permit definitive proton assignment.     

Chemical and structural implications of 1',2'- versus 2',4'- conformational constraints in the sugar moiety of modified thymine nucleosides

In order to understand how the chemical nature of the conformational constraint of the sugar moiety in ON/RNA(DNA) dictates the duplex structure and reactivity, we have determined molecular structures and dynamics of the conformationally constrained 1',2'-azetidine- and 1',2'-oxetane-fused thymidines, as well as their 2',4'-fused thymine (T) counterparts such as LNA-T, 2'-amino LNA-T, ENA-T, and aza-ENA-T by NMR, ab initio (HF/6-31G** and B3LYP/6-31++G**), and molecular dynamics simulations (2 ns in the explicit aqueous medium). It has been found that, depending upon whether the modification leads to a bicyclic 1',2'-fused or a tricyclic 2',4'-fused system, they fall into two distinct categories characterized by their respective internal dynamics of the glycosidic and the backbone torsions as well as by characteristic North-East type sugar conformation (P = 37 degrees +/- 27 degrees , phi(m) = 25 degrees +/- 18 degrees ) of the 1',2'-fused systems, and (ii) pure North type (P = 19 degrees +/- 8 degrees , phi(m) = 48 degrees +/- 4 degrees ) for the 2',4'-fused nucleosides. Each group has different conformational hyperspace accessible, despite the overall similarity of the North-type conformational constraints imposed by the 1',2'- or 2',4'-linked modification. The comparison of pK(a)s of the 1-thyminyl aglycon as well as that of endocyclic sugar-nitrogen obtained by theoretical and experimental measurements showed that the nature of the sugar conformational constraints steer the physicochemical property (pK(a)) of the constituent 1-thyminyl moiety, which in turn can play a part in tuning the strength of hydrogen bonding in the basepairing.     

Complexation equilibria between niobium(V) and 4-(4'H-1',2',4'-triazolyl-3'-azo)-2-methylresorcinol Extraction-spectrophotometric determination of niobium in pyrochlore-bearing rocks

The complexation equilibria between niobium(V) and 4-(1'H-1',2',4'-triazolyl-3'-azo)-2-methylresorcinol has been studied by spectrophotometric methods and graphical and numerical calculation methods. The 1:2 Nb:R complex species formed at pH 6.2 ( = 2.16 x 10(4) l.mole(-1).cm(-1) at 490 nm) allows the determination of 0.15-2.50 ppm Nb. A 1:1 Nb:R complex species can be extracted into n-butanol from 0.1-1.5M hydrochloric acid ( = 1.28 x 10(4) l.mole(-1) .cm(-1) at 510 nm) and Beer's law is obeyed over the range 0.77-4.64 ppm Nb. Interferences and their elimination have been studied and the methods applied to the determination of niobium in pyrochlore-bearing ores.     

Molecular rectification in a metal-insulator-metal junction based on self-assembled monolayers

An electrical junction formed by mechanical contact between two self-assembled monolayers (SAMs)--a SAM formed from an dialkyl disulfide with a covalently linked tetracyanoquinodimethane group that is supported by silver (or gold) and a SAM formed from an alkanethiolate SAM that is supported by mercury-rectifies current. The precursor to the SAM on silver (or gold) was bis(20-(2-((2,5-cyclohexadiene-1,4-diylidene)dimalonitrile))decyl)) disulfide and that for the SAM on mercury was HS(CH(2))(n-1)CH(3) (n = 14, 16, 18). The electrical properties of the junctions were characterized by current-voltage measurements. The ratio of the conductivity of the junction in the forward bias (Hg cathodic) to that in the reverse bias (Hg anodic), at a potential of 1 V, was 9 +/- 2 when the SAM on mercury was derived from HS(CH(2))(15)CH(3). The ratio of the conductivity in the forward bias to that in the reverse bias increased with decreasing chain length of the alkanethiol used to form the SAM on mercury. These results demonstrate that a single redox center asymmetrically placed in a metal-insulator-metal junction can cause the rectification of current and indicate that a fixed dipole in the insulating region of a metal-insulator-metal junction is not required for rectification.     

Molecular rectification: self-assembled monolayers in which donor-(pi-bridge)-acceptor moieties are centrally located and symmetrically coupled to both gold electrodes

Self-assembled monolayers (SAMs) obtained from 1-(10-acetylsulfanyldecyl)-4-[2-(4-dimethylaminophenyl)vinyl]quinolinium iodide exhibit asymmetric current-voltage (I-V) characteristics. The rectification may be reversibly switched: it is suppressed when the film is exposed to HCl vapor, the intramolecular charge-transfer axis being inhibited by protonation, but restored when exposed to NH(3). The behavior is intrinsic to the donor-(pi-bridge)-acceptor moiety, and ambiguity in the assignment has been excluded by matching the alkyl tails on the substrate and contacting STM tip to locate the chromophore midway between the electrodes: Au-S-C(10)H(21)//D-pi-A-C(10)H(20)-S-Au. Films contacted by gold tips exhibit rectification ratios of ca. 18 at +/-1 V, whereas those contacted by pentanethiolate (Au-S-C(5)H(11))- and decanethiolate (Au-S-C(10)H(21))-coated tips have corresponding ratios of ca. 11 and 5, respectively. The I-V curves are different, but when adjusted for thickness the current versus electric field dependence is indistinguishable. Seven dyes are reported: SAMs with sterically hindered D-pi-A moieties, in which the donor and acceptor are twisted out of plane, exhibit rectification, whereas those that are planar or have a weak donor-acceptor combination do not.     

Easily processable phenylene-thiophene-based organic field-effect transistors and solution-fabricated nonvolatile transistor memory elements

The synthesis of a new series of mixed phenylene-thiophene oligomers is reported; 2,5-bis(4-n-hexylphenyl)thiophene (dH-PTP, 1), 5,5'-bis(4-n-hexylphenyl)-2,2'-bithiophene (dH-PTTP, 2), 5,5' '-bis(4-n-hexylphenyl)-2,2':5',2' '-terthiophene (dH-PT(3)P, 3), 5,5' "-bis(4-n-hexylphenyl)-2,2':5',2' ':5' ',2' "-quaterthiophene (dH-PT(4)P, 4), 1,4-bis[5-(4-n-hexylphenyl)-2-thienyl]benzene (dH-PTPTP, 5), and 2,5-bis[4(4'-n-hexylphenyl)phenyl]thiophene (dH-PPTPP, 6) were characterized by (1)H NMR, elemental analysis, UV-visible spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. Vacuum-evaporated and solution-cast films were characterized by X-ray diffraction and scanning electron microscopy. All compounds display high p-type carrier mobilities as evaporated (up to 0.09 cm(2)/Vs) and as solution-cast (up to 0.03 cm(2)/Vs) films on both Si/SiO(2) and ITO/GR (glass resin) substrates. The straightforwardly synthesized dH-PTTP (2) displays an unprecedented combination of mobility, on/off ratio, stability, and processability. Both dH-PTTP (2) and dH-PPTPP (6) display a reversible, tunable, and stable memory effect even as solution-cast devices, with turn-on characteristics shifting from accumulation mode to zero or depletion mode after a writing voltage V(w) is applied. The charge storage is distributed over the gate dielectric structure and is concentrated near the dielectric-semiconductor interface, as evidenced by the response of "floating gate" configuration devices. Simple nonvolatile elements have been fabricated by solution-only techniques on ITO substrates using spin-coated glass resin, solution-cast oligomeric semiconductors, and painted graphite paste electrodes.     

Solid-state synthesis of poly(3',4'-dimethoxy-2,2':5',2"- terthiophene): comparison with poly(terthiophene) and poly(3',4'-ethylenedioxy-2,2':5',2"- terthiophene)

A new terthiophene monomer: 3',4'-dimethoxy-2,2':5',2"-terthiophene (TMT) was synthesized and characterized by 1H-NMR, 13C-NMR and FTIR. The solid-state oxidative polymerizations of TMT were performed in various ratios of oxidant (FeCl?) to monomer (TMT). The resulting polymers were characterized by 1H-NMR, FTIR, UV-vis-NIR, GPC, X-ray diffraction, CV, as well as TGA and conductivity measurements. The structure and properties of poly (TMT) were compared with those of polyterthiophene [poly(TT)] and poly (3',4'-ethylenedioxy-2,2':5',2"-terthiophene) [poly(TET)] prepared under the same polymerization conditions. After comparative analysis with poly(TT) and poly(TET), the effects of the dimethoxy substituent and FeCl? on the structural and physicochemical properties of the poly(TMT)s were discussed in depth. The comparison suggested that the dimethoxy-substituted polymer did not display higher crystallinity, thermal stability, conductivity and electrochemical activity than ethylenedioxy substituted one. The results also showed that the effect of FeCl? on poly(TMT) was similar that seen with the poly(TT), in which the oxidation degree, electrochemical activity and conductivity increased steadily with increasing [FeCl?/[TT] ratio. Furthermore, the poly(TMT) and poly(TT) are mostly made up of dimers with a small amount of higher molecular weight components.     

Potentiometric pH sensors based on chemically modified electrodes with electropolymerized metal-tetraaminophthalocyanine

Potentiometric pH sensors based on polymer film were prepared by electropolymerization of the monomer nickel(II)-4,4',4',4'-tetraaminophthalocyanine (NiTAPc) or copper(II)-4,4',4',4'-tetraaminophthalocyanine (CuTAPc) on glassy carbon (GC) electrodes. The polymer of metal tetraaminophthalocyanine (p-MTAPc) film coated electrodes show a slope of 55 +/- 1 mV/pH (at 20 degrees C) and nearly Nernstain potentiometric response to pH over the range of pH 1-13. The electrodes possess good potential reproducibility and high selectivity, and are useful sensing devices in pH determination and end-point indication of acid-base potentiometric titration.     

Electron transport through thin organic films in metal--insulator--metal junctions based on self-assembled monolayers.

This paper describes an experimentally simple system for measuring rates of electron transport across organic thin films having a range of molecular structures. The system uses a metal--insulator--metal junction based on self-assembled monolayers (SAMs); it is particularly easy to assemble. The junction consists of a SAM supported on a silver film (Ag-SAM(1)) in contact with a second SAM supported on the surface of a drop of mercury (Hg-SAM(2))--that is, a Ag-SAM(1)SAM(2)-Hg junction. SAM(1) and SAM(2) can be derived from the same or different thiols. The current that flowed across junctions with SAMs of aliphatic thiols or aromatic thiols on Ag and a SAM of hexadecane thiol on Hg depended both on the molecular structure and on the thickness of the SAM on Ag: the current density at a bias of 0.5 V ranged from 2 x 10(-10) A/cm(2) for HS(CH(2))(15)CH(3) on Ag to 1 x 10(-6) A/cm(2) for HS(CH(2))(7)CH(3) on Ag, and from 3 x 10(-6) A/cm(2) for HS(Ph)(3)H (Ph = 1,4-C(6)H(4)) on Ag to 7 x 10(-4) A/cm(2) for HSPhH on Ag. The current density increased roughly linearly with the area of contact between SAM(1) and SAM(2), and it was not different between Ag films that were 100 or 200 nm thick. The current--voltage curves were symmetrical around V = 0. The current density decreased with increasing distance between the electrodes according to the relation I = I(0)e(-beta d(Ag,Hg)), where d(Ag,Hg) is the distance between the electrodes, and beta is the structure-dependent attenuation factor for the molecules making up SAM(1). At an applied potential of 0.5 V, beta was 0.87 +/- 0.1 A(-1) for alkanethiols, 0.61 +/- 0.1 A(-1) for oligophenylene thiols, and 0.67 +/- 0.1 A(-1) for benzylic derivatives of oligophenylene thiols. The values of beta did not depend significantly on applied potential over the range of 0.1 to 1 V. These junctions provide a test bed with which to screen the intrinsic electrical properties of SAMs made up of molecules with different structures; information obtained using these junctions will be useful in correlating molecular structure and rates of electron transport.