磷酸三丁酯与醇二元混合体系的热力学性质

用量热法测定了298.15 K时, 磷酸三丁酯(TBP)+甲醇/乙醇/正丁醇/正丙醇四个二元混合体系的超额混合焓及293.15 K和303.15 K时部分组成下的超额混合焓, 其值均在−0.3 − 0.3 kJ•mol−1之间, 且基本不受温度的影响. 用无热溶液模型计算了各体系的超额熵、超额Gibbs自由能及各组分的活度系数. 热力学分析表明, TBP+甲醇/乙醇/正丙醇二元体系能较好地符合无热溶液模型, 而TBP+正丁醇体系则不符合无热溶液模型.     

A Solution State Study of the Complexation and Thermodynamic Parameters of Binary Complexes of the Inner Transition Metals with Piracetam in Aqueous and Mixed Solvents

An equilibrium study on complexation behavior of the inner transition metals, where M = {Y(III), La(III, Ce(III, Pr(III), Nd(III), Sm(III), Gd(III), Dy(III), Th(IV)} and L = piracetam, has been carried out using the Irving–Rossotti titration technique in aqueous media at different temperatures and ionic strengths. The protonation constant and stability constants (log₁₀ β _n ) of the resulting inner metal–ligand complexes have been calculated with the Fortran IV program BEST using the method of least squares and considering the BESTFIT model. Thermodynamic parameters were also evaluated, yielding negative ΔG°, ΔH° and positive ΔS° values that indicate complex formation is favorable at ordinary temperatures. Species distribution curves of complexes have been plotted as function of pH using the SPEPLOT FORTRAN IV program to visualize the presence of various species in equilibrium in the pH range 2–6. To understand more about these equilibria, the stability of these complexes was studied at different percentages of solvent (10–30 % v/v) in different aqua-organic solvent mixtures with methanol, ethanol, 1-butanol and dimethylformamide.     

Determination of Thermodynamic Parameters from Evaporation of Binary Microdroplets of Volatile Constituents

An experimental technique based on a modified vibrating orifice aerosol generator has been employed to study unsteady evaporation of linear streams of highly monodisperse binary microdroplets of volatile constituents over short time periods (i.e., <1 ms), such that the droplet composition remains nearly constant. The droplet size and temperature (i.e., refractive index) have been determined with high temporal resolution from the resonances observed in the simultaneous elastic and Raman light scattering spectra obtained by varying the droplet size through modulation of droplet generation frequency. By using this technique we show that thermodynamic parameters of binary systems, such as activity coefficients as well as vapor pressures of the constituents as functions of temperature, can be determined. We have applied the procedure to study unsteady evaporation rates of pure ethanol and methanol droplets as well as binary droplets containing various ratios of ethanol and methanol. We have obtained vapor pressures of ethanol and methanol as functions of temperature as well as activity coefficients of ethanol and methanol as functions of composition, and the results show excellent agreements with the values reported in the literature. The technique presented in this paper is applicable to any binary system containing at least one volatile constituent. Copyright 2000 Academic Press.     

动力学体系中双组份的协同效应研究及其分析应用

用停流ＦＩＡ－分光光度法研究了铬（Ⅵ）－碘化钾动力学反应体系中铁(Ⅱ)和钒(Ⅳ)的协同诱导效应，以协同系数（Ｄ）表示二者相互作用程度的大小，在此基础上提出了一种新的动力学双组份同时测定的方法，本法可扩大前述方法的线性范围，并降低检测限，测定了模拟水样品中铁和钒的含量，结果满意。     

Ultrasound Absorption Anisotropy in the Vicinity of Smectic A-Nematic Transition

The results of a low frequency ultrasonic study of 4-n-butyloxybenzylidene-4'-n-butylaniline (BBBA) in the vicinity of the smectic A-nematic transition are presented. The frequency and temperature dependence of the parameters describing the anisotropic ultrasound absorption are determined experimentally and compared with the predictions of fluctuation and relaxation theories of the smectic A-nematic transition. It is shown that no single theory could explain all of the experimental data.     

Ultrasound Absorption Anisotropy in the Vicinity of Smectic A-Nematic Transition

Abstract

The results of a low frequency ultrasonic study of 4-n-butyloxybenzylidene-4'-n-butylaniline (BBBA) in the vicinity of the smectic A-nematic transition are presented. The frequency and temperature dependence of the parameters describing the anisotropic ultrasound absorption are determined experimentally and compared with the predictions of fluctuation and relaxation theories of the smectic A-nematic transition. It is shown that no single theory could explain all of the experimental data.     

皂荚素的表面活性及其二元体系的热力学研究

通过表面张力的测定研究了皂荚素(GS)的表面活性及其热力学性质随温度的变化.测定了皂荚素分别与十二烷基磺酸钠、十二烷基聚氧乙烯醚硫酸钠、全氟辛酸钠、十二烷基脂肪醇聚氧乙烯(9)醚、辛基酚聚氧乙烯(10)醚及十六烷基三甲基溴化铵等复配的表面张力-浓度对数关系(γ～lgc)曲线,并用二维晶格模型及正规溶液理论计算了含皂荚素的二元表面活性剂溶液表面吸附层的组成、分子相互作用参数及分子交换能.结果表明,皂荚素主要呈现非离子表面活性剂的性质,与阳离子表面活性剂复配呈微弱的离子性.复配后分子交换能均小于零,复配增效.增效顺序为GS/阳离子>GS/非离子>GS/阴离子(表面活性剂复配体系).     

Adsorption of the Ternary Liquid Mixture Ethanol/n-Octane/n-Hexadecane onto Activated Carbon: I. The Adsorption Excess of the Ternary Mixture and of Its Binary Combinations

The adsorption isotherms of the binary mixtures of ethanol/n-Octane, ethanol/n-hexadecane and n-octane/n-hexadecane onto the activated carbon TA 95 were measured at 278 K, 288 K, 298 K and 308 K and described with mathematical functions. About 300 experimental values of the adsorption excess of the ternary mixture ethanol/n-octane/n-hexadecane onto activated carbon TA 95 at 298 K were measured by gas chromatography inside the ternary triangle. The ternary miscibility gap was determined at three temperatures. A good representation of the ternary data and the calculated activity coefficients (using the UNIFAC model) in three-dimensional space was possible with the help of transformation of coordinates. It was possible, too, by utilization of the conception of the quasi two-component representation of the mole fractions with and without miscibility gap. Several influencing factors on ternary adsorption isotherms were discussed for the system ethanol/n-octane/n-hexadecane/TA 95.     

Characterization of a Cellulose Trisphenylcarbamate/1-Octyl-3-methylimidazolium Tetrafluoroborate Mixture as GC Stationary Phase: Thermodynamic Parameters and LSER Methodology

A novel cellulose trisphenylcarbamate/1-octyl-3-methylimidazolium tetrafluoroborate [CTPC/[OcMIM]BF₄] gas chromatographic stationary phase was prepared and characterized utilizing thermodynamic parameters and LSER methodology. The results revealed that the interaction model of each probe molecule on the CTPC/[OcMIM]BF₄ stationary phase was invariable within the temperature range studied because of an excellent linear relationship between lnk and 1/T for each probe molecule. The chromatographic retentions of all probe molecules on the CTPC/[OcMIM]BF₄ stationary phase were enthalpy-driven processes. The main interaction forces of the stationary phase with probe molecules are hydrogen bonding interactions, dispersive interactions and dipole–dipole interactions. Moreover, the contribution of each interaction is in the order of hydrogen bonding interaction > dispersive interaction > dipole–dipole interaction. The mixture of CTPC and [OcMIM]BF₄ used as capillary gas chromatography stationary phase had high column efficiency and good film-forming ability, which was suitable for the separation of both nonpolar and polar compounds. Particularly the separation efficiencies of aromatic amines on CTPC/[OcMIM]BF₄ are superior to those on the commercial SE-54 column.     

Characterization of a Cellulose Trisphenylcarbamate/1-Octyl-3-methylimidazolium Tetrafluoroborate Mixture as GC Stationary Phase: Thermodynamic Parameters and LSER Methodology

A novel cellulose trisphenylcarbamate/1-octyl-3-methylimidazolium tetrafluoroborate [CTPC/[OcMIM]BF₄] gas chromatographic stationary phase was prepared and characterized utilizing thermodynamic parameters and LSER methodology. The results revealed that the interaction model of each probe molecule on the CTPC/[OcMIM]BF₄ stationary phase was invariable within the temperature range studied because of an excellent linear relationship between lnk and 1/T for each probe molecule. The chromatographic retentions of all probe molecules on the CTPC/[OcMIM]BF₄ stationary phase were enthalpy-driven processes. The main interaction forces of the stationary phase with probe molecules are hydrogen bonding interactions, dispersive interactions and dipole–dipole interactions. Moreover, the contribution of each interaction is in the order of hydrogen bonding interaction > dispersive interaction > dipole–dipole interaction. The mixture of CTPC and [OcMIM]BF₄ used as capillary gas chromatography stationary phase had high column efficiency and good film-forming ability, which was suitable for the separation of both nonpolar and polar compounds. Particularly the separation efficiencies of aromatic amines on CTPC/[OcMIM]BF₄ are superior to those on the commercial SE-54 column.

     

多孔二元过渡金属纳米片阵列电极制备及电催化析氢研究

碱性电解液中,电解水析氢的H20解离过程非常缓慢,造成析氢反应较高的过电位和Tafel效率.选择具有本征高析氢活性的合金催化剂与水解离中心-过渡金属氧化物复合,并进一步优化复合物形貌结构,被证明是解决这个科学问题的重要策略.我们报道一例新颖的二元过渡金属纳米片阵列自支撑电极(MoO3_x-MoNi4@NF),多孔MoO...     

环形高分子单链塌缩的熔球中间态及其热力学解释

采用动态蒙特卡洛分子模拟研究了环形高分子单链在不良溶剂中发生塌缩转变时可逆地出现具有核-壳结构特征的熔球中间态,发现该结构特征与相同链长的线形单链基本相同,表明其只与链的长短有关,而与链端基的特殊效应无关.本工作将这一现象与单链单晶在其平衡熔点附近出现的类似现象相互关联,采用表面预溶模型来解释单链塌缩出现熔球中间态的热力学机理.分子量越低,熔球越小,表面预溶现象就越显著,塌缩转变随热力学条件变化就越缓慢.实际的高分子体系由于链内拓扑缠结,在表面未必能充分释放片段链,达不到理论预期的平衡态.表面预溶使得相分离临界点或晶体熔点附近在界面厚度方向上存在链单元能量状态不连续分布,这在微观分子水平上与临界界面连续浓度梯度的传统理论处理不一致,为我们深入理解高分子流体界面的微观结构带来帮助.     

Investigation of the Compatibility of a Multi-Component TN Liquid Crystal Mixture and a Multi-Component Cholesteric Liquid Crystal Mixture by DSC

The phase transition curves of a multi-component TN liquid crystal mixture (TN 88-1) and a multi-component cholesteric liquid crystal mixture (Ch 88-2) were plotted by using a differential scanning calorimeter. The phase transition temperature and phase transition heat were obtained from the DSC curves. The results show that the components of TN 88-1 are compatible and they can form a stable mixture with CB 15 chiral liquid crystal. The components of Ch 88-2 are not compatible and Poly (MMA-BMA) can greatly improve their compatibility. This revised version was published online in July 2006 with corrections to the Cover Date.     

Lamellar/Disorder Phase Transition in a Mixture of Water/2,6-Dimethylpyridine/Antagonistic Salt

The effects of adding an antagonistic salt, sodium tetraphenylborate ( \(\hbox {NaBPh}_4\) ), to a binary mixture of deuterated water and 2,6-dimethylpyridine were investigated by visual inspection, optical microscopy, and small-angle neutron scattering. With increasing salt concentration, the two-phase region shrinks. When the concentration of \(\hbox {NaBPh}_4\) is \(85\hbox { mmol}{\cdot} \hbox {L}^{-1}\) , a temperature-induced lamellar/disorder phase transition is observed at 338 K. These trends are similar to those observed for a mixture of water/3-methylpyridine/ \(\hbox {NaBPh}_4\) (Sadakane et al., Phys. Rev. Lett. 103, 167803 (2009)).     

Systematic Variation of Length Ratio and the Formation of Smectic A and Smectic C Phases

The phase diagrams of four binary mixtures of chemically similar smectogenic mesogens differing only in molecular length are investigated. In these bidisperse systems the length ratio varies systematically. The phase diagrams show the stabilization of the smectic A and the destabilization of the smectic C phase with increasing length ratio as a general trend. Detailed small‐angle X‐ray diffraction and electro‐optic measurements revealed a decrease in smectic translational order and a continuous reduction of the tilt angle with increasing length difference. These surprising results are of general interest for the understanding of the structure and dynamics of smectic phases. The remarkably strong impact of the length difference on the smectic layer structure and the phase behavior is discussed from a mechanistic point of view taking into account sterical interactions. For the observed structural changes in these bidisperse smectics we propose pronounced out‐of‐layer fluctuations with increasing length difference as driving force, causing neighboring molecules within nearest layer into a smectic A‐like packing.     

Mixing Ratio and Cooling Rate Dependence of Molecular Compound Formation in OPO/POP Binary Mixture

Owing to the increasing reports of the harmful effects of trans and saturated fatty acids, the demand for trans- and saturated-fatty-acid-free oil and fat products is increasing among consumers. However, it is difficult to maintain the product stability and shape retention of such oil and fat products. As a result, there is a high demand in the processed oil and fat industry to develop solutions to such problems. Herein, we used molecular compound (MC) crystals in an attempt to find alternatives to trans and saturated fatty acids. The MCs used were 1,3-dioleoyl-2-palmitoyl-sn-glycerol (OPO) and 1,3-dipalmitoyl-2-oleoyl-sn-glycerol (POP)—the main components of lard and palm oil, respectively. We believe that OPO and POP can be used to obtain no-trans, low-saturation, and high-oleic-acid oil and fat products. Optimal conditions for efficient MC crystallization were examined by changing the oil and fat composition under rapid cooling conditions assuming industrial cooling process by using differential scanning calorimetry and synchrotron radiation time-resolved X-ray diffraction methods. It was concluded that the increase in OPO concentration destabilized MC formation, while the increase in POP concentration stabilized it under rapid cooling conditions. As a result, it was shown that MC crystals can be efficiently obtained by reducing the degree of POP supercooling.     

Monte Carlo Studies of the Structural and Thermodynamic Properties of Some Smectic and Ferroelectric Liquid Crystals

Monte Carlo simulation based on the Gaussian overlap model was used to study the thermodynamic properties of smectic C: C₅H₁₁O–(OH)C₆H₃–CH=N–C₆H₄–C₅H₁₁ (A), C₁₀H₂₁O–C₆H₄–CH=CH–C₆H₄–OC₁₀H₂₁ (B), ferroelectric smectic C* liquid crystals (LC): C₇H₁₅O–C₆H₄–C₆H₄–COO–CH₂C*H(CH₃)C₂H₅ (C), C₈H₁₇O–C₆H₄–C₆H₄–C₂H₄C*H(CH₃)C₂H₅ (D), and an equimolar mixture of {A+C} and {A+D}. A system of N = 125 pairwise interacting ellipsoids of revolution placed in a volume V at a temperature T (that is, a system described by a canonical NVT-ensemble) is considered. These interactions were calculated using a specially devised Lennard-Jones potential, allowing for both mild anisotropic repulsion of particles (ellipsoids) and their dispersion attraction. Dipole–dipole interactions were also taken into account, since the molecules have highly polar groups: –O–, OH, CH=N, and COO and hence a high dipole moment (4.2-5.3 D). Calculations were carried out for a rectangular parallelepiped with periodic boundary conditions imposed on its faces. An elementary object of the NVT-ensemble was a two-molecule microcluster (dimer) but not a single molecule from the group under study. Smectic A ordering in the system has been unambiguously proven for different temperatures and fixed densities (0.32 0.44, where is the close packing coefficient). The ordering is attributed to the large (transverse) dipole moment inherent in molecules {A}-{D}. Temperature dependences of free energy, configuration energy, heat capacity C_v, and orientational order parameter were obtained. The curves agree well with the experimental data on variation of the properties of smectic LC.     

TiO_2的相变和热力学性质(英文)

利用第一性原理平面波赝势密度泛函理论方法对TiO2从金红石结构到萤石结构的相变进行了理论研究,并且通过准谐德拜模型分别得到了金红石和萤石结构TiO2的热力学性质.计算结果与实验值以及其它理论计算的结果都符合得很好,通过吉布斯能的计算得到TiO2从金红石结构到萤石结构的相变压强为47.74GPa,并成功地获得了相对体积(V/V0)、德拜温度(Θ)和热容(CV)随压强(p)和温度(T)的变化关系.     

pH-Responsive Rheological Properties and Microstructure Transition in Mixture of Anionic Gemini/Cationic Monomeric Surfactants

Surfactant aggregates have long been considered as a tool to improve drug delivery and have been widely used in medical products. The pH-responsive aggregation behavior in anionic gemini surfactant 1,3-bis(N-dodecyl-N-propanesulfonate sodium)-propane (C₁₂C₃C₁₂(SO₃)₂) and its mixture with a cationic monomeric surfactant cetyltrimethylammonium bromide (CTAB) have been investigated. The spherical-to-wormlike micelle transition was successfully realized in C₁₂C₃C₁₂(SO₃)₂ through decreasing the pH, while the rheological properties were perfectly enhanced for the formation of wormlike micelles. Especially at 140 mM and pH 6.7, the mixture showed high viscoelasticity, and the maximum of the zero-shear viscosity reached 1530 Pa·s. Acting as a sulfobetaine zwitterionic gemini surfactant, the electrostatic attraction, the hydrogen bond and the short spacer of C₁₂C₃C₁₂(SO₃)₂ molecules were all responsible for the significant micellar growth. Upon adding CTAB, the similar transition could also be realized at a low pH, and the further transformation to branched micelles occurred by adjusting the total concentration. Although the mixtures did not approach the viscosity maximum appearing in the C₁₂C₃C₁₂(SO₃)₂ solution, CTAB addition is more favorable for viscosity enhancement in the wormlike-micelle region. The weakened charges of the headgroups in a catanionic mixed system minimizes the micellar spontaneous curvature and enhances the intermolecular hydrogen-bonding interaction between C₁₂C₃C₁₂(SO₃)₂, facilitating the formation of a viscous solution, which would greatly induce entanglement and even the fusion of wormlike micelles, thus resulting in branched microstructures and a decline of viscosity.