Compositions and structures of nanoparticles of pentagonal axial symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>5<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

The method of determination of the structure and the number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group has been developed. The formulas for the calculation of the number of particles with symmetry group D _5d are reported. The number of particles in these shells is determined by three structurally invariant numbers and the “quantum number” of the group order n. The classification of all possible nanostructures with symmetry group D _5d is given: C _θ+10z , z = 0, 1, 2, …, where the basic shells are C _θ = C ₂, C ₁₀, C ₁₂. The sum rule has been obtained for the coordination numbers of shell sites located at symmetry axes. Pentagonal axial nanoparticles are shown to be the initial shells for obtaining (5,5) and (10,10) armchair nanotubes or (5,0) and (10,0) zigzag nanotubes. The general formula of these nanotubes closed with icosahedral and dodecahedral caps is N _20+10p , N _60+10p (p = 1, 2, …). The graphical constructions of all classes of nanoparticles and nanotubes of the pentagonal axial type are reported.     

Modification of silica nanoparticles with stereisomers of <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-butylthiacalix[4]arene containing four 2-oxo-2-{[3-(triethoxysilyl)prop-1-yl]amino}ethoxy substituents at the lower rim

Three stereoisomers (cone, partial cone, and 1,3-alternate) of p-tert-butylthiacalix[4]arene bearing four anchor propyltriethoxysilane substituents at the lower rim were synthesized for the first time. Surface modification of silica nanoparticles (d = 12 nm) with the synthesized macrocycles gave novel hybride thiacalix [4]arene?SiO₂ particles. The obtained nanostructured adsorbents were found to efficiently extract nitroaromatic compounds from aqueous solutions. The partial cone and 1,3-alternate thiacalix[4]arene–SiO₂ hybrid particles showed affinity to nitrophenols.     

Influence of the Molecular Mass of Poly(<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone) on Formation of Cu<Subscript>2</Subscript>O Nanoparticles During Reduction of Divalent Copper Ions with <Emphasis Type="Italic">tert</Emphasis>-Butylamine Borane in Polymer Solution

The process of reduction of divalent copper ions with tert-butylamine borane in dilute aqueous solutions of poly(N-vinylpyrrolidone) is investigated. The influence of polymer molecular mass on properties of the resultant Cu₂O sols is studied. It is shown that Cu₂O nanoparticles with an average diameter of 6–8 nm independent of polymer molecular mass and a relatively narrow size distribution of particles are formed in the systems under study. The contour length of macromolecules and the hydrodynamic diameter of a poly(N-vinylpyrrolidone) macromolecular coil are compared with the diameter of Cu₂O particles. Poly(N-vinylpyrrolidone) with M ≥ 1 × 10⁴ can be used to produce Cu₂O nanoparticles. Poly(N-vinylpyrrolidone) with M > 4 × 10⁴ should be used for the formation of long-living Cu₂O sols.     

Compositions and structures of nanoparticles of trigonal symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>3<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

A method has been developed for the determination of the structure and number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group. The formulas for calculation of the number of particles of symmetry D _3d have been reported. It has been shown that the number of atoms in trigonal shells is determined by three structurally invariant numbers and the quantum number of the group order n. All possible nanostructures of symmetry D _3d have been classified: C_{θ + 6z} , z = 0, 1, 2, ..., where the basic shells are C_θ = C₆, C₈, and C₁₄. A sum rule has been obtained for the coordination numbers of the shell sites located on symmetry axes. Trigonal nanoparticles are parent ones for obtaining (3,0), (6,0), and (9,0) nanotubes of trigonal type. The general formulas of these nanotubes with icosahedral, dodecahedral, and cubic caps are N_{8 + 12p} , N_{20 + 24p} , and N_{60 + 36p} (p = 1, 2, ...), respectively. The graphical constructions of all classes of trigonal nanoparticles and nanotubes are reported.     

Synthesis of Block Copolymers of Styrene with <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-Lactide by the Sequential Controlled Cationic Polymerization and Ring-Opening Anionic Polymerization

The cationic polymerization of styrene initiated by the system 2-chloro-2-phenylpropane–TiCl₄–pyridine is studied in a mixture CH₂Cl₂–n-hexane at a temperature of –80°С. It is shown that under these conditions polymerization occurs via the living mechanism at [monomer]: [initiator] ≤ 100. The method of preparing polystyrenes with terminal primary hydroxyl groups (M_n = 4000–10000 g/mol) by the sequential controlled cationic polymerization of styrene and the in situ alkylation of 4-phenoxy-1-butanol by polystyrene macrocations is proposed. The resulting functionalized polystyrenes are used as macroinitiators of anionic-coordination ring-opening polymerization of D,L-lactide in the presence of tin bis(2-ethyl hexanoate) [Sn(Oct)₂] in toluene at 80°С. Copolymers polystyrene-block-poly(D,L-lactide) with the controlled length of the poly(D,L-lactide) block (M_n = 10000–17000 g/mol) and a relatively low molecular-weight distribution (M_w/M_n = 1.6–1.8) are synthesized. Formation of the block copolymers is confirmed by ¹Н NMR spectroscopy, gel-permeation chromatography, and atomic force microscopy.     

An XPS and STM Study of Oxidized Platinum Particles Formed by the Interaction between Pt/HOPG with NO<Subscript>2</Subscript>

X-ray photoelectron spectroscopy (XPS) (with AlK_α and AgL_α radiations) and scanning tunneling microscopy (STM) were used to study the interaction of two model samples prepared by vacuum evaporation of platinum on highly oriented pyrolytic graphite (HOPG) with NO₂ at room temperature. According to STM data, platinum evaporation on the graphite surface produced particles of a flattened shape. In the Pt/HOPGS1 sample with a lower concentration of platinum, the average diameter of particles d and the height-to-diameter ratio h/d were 2.8 nm and 0.29, respectively. In the Pt/HOPG-S2 sample with a higher concentration of platinum, the average values of d and h/d were 5.1 nm and 0.32. When the samples interacted with NO₂ (P ≈ 3 × 10^–6 mbar), the particles of metallic platinum completely converted to the particles of PtO_2· Upon oxidation, the shape of larger platinum particles in the Pt/HOPG-S2 sample did not change, although for the dispersed particles in the Pt/HOPG-S1 samples under these conditions, the h/d ratio increases. The reduction of oxide to metal particles on heating the Pt/HOPG-S1 sample in vacuum at 460°С is accompanied by an increase in the size of particles. Their shape became more round compared to the initial one. It was found that X-ray radiation affects the state of platinum in the oxidized sample by reducing the surface layer of PtO₂ to PtO.     

Synthesis of new dyes containing double tetrazole groups for sensitization of TiO<Subscript>2</Subscript> nanoparticles in dye-sensitized solar cells

Di(1H-tetrazol-5-yl)methane is employed as a new electron acceptor group in the synthesis of two metal-free organic dyes containing triphenylamine donor group. Dye-sensitized nanocrystalline TiO₂ solar cell (DSSC) applying these novel dyes is constructed for consideration of their photovoltaic properties. The electronic properties of the dyes are also considered with the aid of theoretical calculations. The DSSC constructed from 4-(2,2-di(1H-tetrazol-5-yl)vinyl)-N,N-diphenylaniline (T1) shows a short-circuit photocurrent density of 13.38 mA cm^?2, an open circuit voltage of 578 mV, and a fill factor of 0.54, with a resulted solar energy-to-electricity conversion efficiency of 4.18% under simulated 1 sun irradiation (100 mW cm^?2). This result reveals that the dye with the di(1H-tetrazol-5-yl)methane anchoring group injects more electrons to the conduction band of TiO₂ in comparison with its analogs with single tetrazole ring in their anchoring group. It is found that in spite of a red-shift of the absorption spectrum resulted from the lengthening of the molecule, the dye with two di(1H-tetrazol-5-yl)methane groups gives lower performance than the dye with a single electron acceptor.     

Synthesis and crystal structure of ternary molybdate compound K<Subscript>5</Subscript>Pb<Subscript>0.5</Subscript>Hf<Subscript>1.5</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>6</Subscript>

Single crystals of triple molybdate of composition 5:1:3 K₅Pb_0.5Hf_1.5(MoO₄)₆ have been grown and their crystal structure has been solved from X-ray diffraction data (an automated diffractometer X8 APEX, MoK _α -radiation, 2173 F(hkl), R = 0.0321). Trigonal unit cell parameters are: a = b = 10.739(2) Å, c = 37.933(9) Å; V = 3789(1) ų, Z = 6, ρ_calc = 4.014 g/cm³, space group \(R\bar 3\). Three-dimensional mixed framework of the structure is formed by two types of MoO₄ tetrahedra and Pb and Hf octahedra linking via common O-vertices. Potassium atoms of three types occupy large vacancies in the framework.     

X-ray diffraction and thermodynamic characteristics for tellurite of the composition Li<Subscript>2</Subscript>CeTeO<Subscript>5</Subscript>

Tellurite of the composition Li₂CeTeO₅ is synthesized by solid-phase method from cerium(IV) and tellurium(IV) oxides and lithium carbonate. The type of syngony, the unit cell parameters, and the compound’s X-ray and pycnometry densities are determined via X-ray diffraction analysis. The isobaric heat capacity of lithium–cerium tellurite is studied by means of dynamic calorimetry in the temperature range of 298.15–673 K; the results serve as the basis for deriving C _p ^° ~ f(T) dependency equations and determining the compound’s thermodynamic functions. λ-shaped anomalous effects, due probably to Type II phase transitions, are found on the C _p ^° ~ f(T) dependence.     

Thermodynamic properties and functions of condensed Bi<Subscript>8</Subscript>O<Subscript>11</Subscript>

The values of ΔH°₂₉₈, S°₂₉₈, H°₂₉₈–H°₀, T, ΔH _fus, and C _p(T), as well as the temperature dependences of the Gibbs energy function, are calculated for Bi₈O₁₁ oxide by proven computational methods.     

Crystal structures of <Emphasis Type="Italic">trans</Emphasis>-[Re<Subscript>6</Subscript>S<Subscript>8</Subscript>(CN)<Subscript>2</Subscript>L<Subscript>4</Subscript>] complexes,L = pyridine or 4-methylpyridine

The structures of three novel octahedral rhenium cluster compounds [Re₆S₈(CN)₂(py)₄]·H₂O (1), [Re₆S₈(CN)₂(4-Mepy)₄] (2), [Re₆S₈(CN)₂(4-Mepy)₄]·4-Mepy (3) (py = pyridine, 4-Mepy = 4-methylpyridine) are determined by X-ray crystallography. Crystal data are: C2/m space group, a = 14.813(1) Å, b = 14.772(1) Å, c = 9.2122(6) Å, β = 119.085(2)°, V = 1761.7(2) ų, d _x = 3.318 g/cm³, R = 0.0585 (1); I4₁/amd space group, a = 16.0018(3) Å, c = 14.7186(5) Å, V = 3768.81(16) ų, d _x = 3.169 g/cm³, R = 0.0489 (2); P2₁/c space group, a = 9.0452(4) Å, b = 15.8065(7) Å, c = 15.2951(6) Å, β = 103.700(2)°, V = 2124.57(16) ų, d _x = 2.957 g/cm³, R = 0.0245 (3). Molecular cluster complexes interact via π-π stacking affording 3D frameworks in 1 and 2 and chains in 3.     

Electronic Structure and Relative Stabilities of 10- and 12-Vertex. <Emphasis Type="Italic">Closo</Emphasis>and <Emphasis Type="Italic">Nido</Emphasis>-Heteroborane Clusters of Ga,Ge, and As Elements

A DFT method with the B3LYP functional and the 6-311++G(d,p) diffuse basis set is used to predict geometries, relative stabilities, electronic structures, and the bonding of closo- and nido-Ga_mB_n–mH _n ^2? , Ge_mB_n–mH _n ^m?2 , and As_mB_n–mH _n ^{2 m?2} (n = 10, 12 and m = 1, 2) Clusters are obtained by replacing BH with isolobal GaH, GeH⁺, and AsH²⁺ fragments, keeping the same skeleton electron pairs (SEP). Based on the polyhedral skeletal electron pairs theory (PSEPT), closo and nido structures are predicted and can be of significant interest for experimentalists working in the field of heteroboranes. Different cluster stabilities are studied according to Gimarc′s and Williams′ rules, where our calculations show that the monosubstituted clusters deviate from these rules, giving rise to open structures. As₂B₈H _n ²⁺ as 10-vertex structures lead to nido-type clusters, however, Ge_mB_n–mH _n ^m?2 (n = 10, 12 and m = 1, 2) give rise to closo isomers with close energies. All optimized structures exhibit large HOMO–LUMO gaps suggesting a good kinetic stability, thus predicting their isolation and characterization.     

Crystal structures of a family of layered coordination polymers containing divalent metal ions (Mn<Superscript>2+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript>) and the 3-amino 4-methyl benzoate ion

The syntheses and crystal structures of the layered coordination polymers M(C₈H₈NO₂)₂ [M = Mn (1), Co (2), Ni (3) and Zn (4)] are described. These isostructural compounds contain centrosymmetric trans-MN₂O₄ octahedra as parts of infinite sheets; the ligand bonds to three adjacent metal ions in μ³-N,O,O′ mode from both its carboxylate O atoms and its amine N atom. In each case, weak intra-sheet N–H?O and C–H?O hydrogen bonds may help to consolidate the structure. Crystal data: 1, C₁₆H₁₆MnN₂O₄, M _r = 355.25, monoclinic, P2₁/c (No. 14), a = 10.6534(2) Å, b = 4.3990(1) Å, c = 15.5733(5) Å, β = 95.1827(10)°, V = 726.85(3) ų, Z = 2, R(F) = 0.026, wR(F ²) = 0.067. 2, C₁₆H₁₆CoN₂O₄, M _r = 359.24, monoclinic, P2₁/c (No. 14), a = 10.6131(10) Å, b = 4.3374(4) Å, c = 15.3556(17) Å, β = 95.473(4)°, V = 703.65(12) ų, Z = 2, R(F) = 0.041, wR(F ²) = 0.091. 3, C₁₆H₁₆N₂NiO₄, M _r = 359.02, monoclinic, P2₁/c (No. 14), a = 10.6374(4) Å, b = 4.2964(2) Å, c = 15.2827(8) Å, β = 95.9744(14)°, V = 694.66(6) ų, Z = 2, R(F) = 0.028, wR(F ²) = 0.070. 4, C₁₆H₁₆N₂O₄Zn, M _r = 365.68, monoclinic, P2₁/c (No. 14), a = 10.6385(5) Å, b = 4.2967(3) Å, c = 15.2844(8) Å, β = 95.941(3)°, V = 694.89(7) ų, Z = 2, R(F) = 0.038, wR(F ²) = 0.107.     

Theoretical prediction of the new high-density lithium boride LiB<Subscript>11</Subscript> with polymorphism and pseudoplasticity

We predict the possibility of existence of the new lithium boride LiB₁₁ with polymorphism. For energy reasons, the preferred type is α′-LiB₁₁ (trigonal space group R3m, a _h = 0.4982 nm, c _h = 1.1123 nm, z _h = 3, ρ = 2.63 g/cm³), with a framework built of tetrahedra and one-capped octahedra. α′-LiB₁₁ is pseudoplastic because of twinning via the high-symmetry state of α-LiB₁₁ (cubic space group \(F\bar 43m\), a = 0.6810 nm, z = 4, ρ = 2.65 g/cm³) and a bipolaron semiconductor. α → α′ transition is accompanied by the 0.0627-nm displacement of 1/11 B atoms. The β′ polymorph (tetragonal space group \(I\bar 4m2\), a = 0.4404 nm, c = 0.7708 nm, ρ = 2.80 g/cm³) is transformation hardened because of the transition to the α′ phase. We infer that LiB₁₁ formation is possible under high pressure.     

Solution Thermodynamics of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis><Superscript>/</Superscript>-Ethylenebis-(salicylideneiminato)-diaquochromium(III) Chloride in Aqueous Dimethylsulphoxide

The densities, viscosities and refractive indices of N,N ^/-ethylene-bis(salicylideneiminato)-diaquochromium(III) chloride, [Cr(salen)(H₂O)₂]Cl, in aqueous dimethylsulfoxide (DMSO) with different mass fractions (w ₂ = 0.20, 0.40, 0.60, 0.80 and 1.00) of DMSO were determined at 298.15, 308.15 and 318.15 K under atmospheric pressure. From measured densities, viscosities and refractive indices the apparent molar volumes (V _φ ), standard partial molar volume (V _φ ⁰ ), the slope (S _V ^* ), standard isobaric partial molar expansibility (φ _E ⁰ ) and its temperature dependence (?φ _E ⁰ /?T) _p , the viscosity B-coefficient, its temperature dependence (?B/?T), solvation number (S _n ) and apparent molar refractivity (R _D ^φ ), etc., were calculated and discussed on the basis of ion–ion and ion–solvent interactions. These results revealed that the solutions are characterized by ion–solvent interactions rather than by ion–ion interactions and the complex behaves as a long range structure maker. Thermodynamics of viscous flow was discussed in terms of transition state theory.     

<Emphasis Type="Italic">In silico</Emphasis> study of the atomic and electronic structure of quantum dots of the CdTe family doped with atoms of rare earth elements

An in silico study of semiconductor quantum dots of the CdTe family doped with atoms of rare earth elements is performed based of density functional theory. An ab initio computer design of quantum dots based on CdTe nanoparticles doped with Eu и Gd atoms is carried out. Partial densities of states of CdTe:Eu and CdTe:Gd quantum dots are calculated and analyzed. X-ray absorption near edge (XANES) spectra near the Eu K-, L₁-, and L₃- and Gd K-, L₁-, and L₃-edges of CdTe:Eu and CdTe:Gd quantum dots are calculated. The sensitivity of XANES spectroscopy for the verification of parameters of a nanosized atomic structure of quantum dots based on CdTe particles doped with atoms of rare earth elements and the determination of the local atomic structure around the atoms of rare earth elements in quantum dots is demonstrated.     

<Emphasis Type="Italic">Tetra</Emphasis>-EDOT substituted 3D electrochromic polymers with lower band gaps

A couple of novel electrochromic materials poly(2,3,4,5-tetrakis(2,3-hydrothieno[3,4-b]dixin-5-yl)-1-methyl-1H-pyrrole) (P(t-EDOT-mPy)) and poly(5,5′,5′′,5′′′-(thiophene-2,3,4,5-tetrayl)tetrakis(2,3-dihydrothieno[3,4-b][1,4]dioxine)) (P(t-EDOT-Th)) are electrodeposited via multi-position polymerization of their tetra-EDOT substituted monomers t-EDOT-mPy and t-EDOT-Th, respectively. Compared with the linear 2D structured poly(thiophene) (E _g=2.2 eV) and poly(2,5-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)thiophene) (E _g=1.7 eV), P(t-EDOT-Th) (E _g=1.62 eV) has the lowest band gap. Hence, we speculate that the band gaps of the two polymers, having 3D structures, are decreased in contrast to non-substituted polymers or bi-EDOT substituted polymers, thiophene and 1-methyl-1H-pyrrole. The results indicated that P(t-EDOT-Th) thin films are more stable and show higher transmittance amid two polymers, which may find their utilization in organic optoelectronics.     

Synthesis and structure of bis(1,2-diaminoethane) copper(II) bis(<Emphasis Type="Italic">o</Emphasis>-hydroxybenzoate) monohydrate and <Emphasis Type="Italic">trans</Emphasis>-diaquabis(1,2-diaminoethane)copper(II) bis(<Emphasis Type="Italic">o</Emphasis>-aminobenzoate)

X-ray structural analysis has been performed for two complex compounds: Cu(en)₂(o-HB)₂H₂O (I) (a = 16.873(4) Å, b = 8.713(2) Å, c = 14.803(3) Å, β = 91.15(2)°, V = 2175.8(8) ų, C2/c, Z = 4, R(F) = 0.0263, 1516 reflections with I > 3σ (I)) and [Cu(en)₂(OH₂)₂]²⁺(o-AB^?)₂ (II) (a = 7.488(5) Å, b = 22.122(8) Å, c = 7.856(5) Å, β = 118.77(2)°, V = 1140.7(11) ų, P2₁/n, Z = 2, R(F) = 0.0432, 1684 reflections with I > 3σ(I)) synthesized under identical conditions (en is ethylenediamine, o-HB is o-hydroxybenzoate, and o-AB is o-aminobenzoate). Although the compounds were assumed to have similar structures and the Cu-Lig bond lengths and the cis and trans angles are acceptable for an octahedral structure, the geometric parameters of o-HB suggest that the copper atom has a plane square environment.     

X-ray photoelectron spectroscopic study of the interaction of supported metal catalysts with NO<Subscript>x</Subscript>

The reactions of the platinum and rhodium model catalysts applied to aluminum oxide with NO_x (10 Torr NO + 10 Torr O₂) were studied by X-ray photoelectron spectroscopy. The reaction conducted at room temperature formed on the surface of the oxide support the NO _3,s ^? nitrate ions characterized by the N1s line at 407.4 eV and O1s line at 533.1 eV and the NO _2,s ^? nitrite ions characterized by the N1s line with a binding energy of 404.7 eV. At the same time, the Pt4f and Rh3d lines of the supported platinum particles are shifted toward higher binding energies by 0.5–1.0 eV and 0.7–1.2 eV, respectively. It is assumed that the binding energies increase due to changes in the chemical state of the platinum metal in which oxygen is dissolved. The reaction of NO_x with Pt/Al₂O₃ at 200°C forms platinum oxide defined by the Pt4f _7/2 line with a binding energy of 72.3 eV.     

Neutron diffraction study of dehydrogenation of titanium carbohydrides TiC<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>H<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>

The possibility of the synthesis of hydrogen-nonstoichiometric cubic titanium carbide ТiС _х of high purity from powdery nonstoichiometric cubic titanium carbohydride ТiС _х H _y or nonstoichiometric titanium carbide with admixture hydrogen by annealing in a continuously maintained vacuum of no worse than 1.33 × 10^–3 Pa at temperatures of 600–750°C for several hours has been shown. Similar annealing at higher temperatures (T ≥ 800°C) does not lead to the complete removal of hydrogen from a sample due to intensive sintering. In this case, it seems that pores between sintered particles are hydrogen traps, and the release of hydrogen through the surface of sintered particles is hindered.