Palladium(II) extraction with 1-{[2-(2,4-Dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]-methyl}-1H-1,2,4-triazole from nitric acid solutions

Palladium(II) extraction from nitric acid solutions with 1-{[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]-methyl}-1H-1,2,4-triazole in toluene is studied. The reagent efficiently extracts palladium(II) from 0.2–6 M HNO₃ by a coordination mechanism yielding the complex Pd₂(NO₃)₄ S ₃ in the organic phase. The reagent can be used for selective separation of palladium(II) from nickel(II), copper(II), and iron(III) in the specified aqueous phase acidity range.     

Complexing and extraction of palladium(II) by <Emphasis Type="Italic">n</Emphasis>-alkyl(tolyl)thiamethylcalix[4]arenes from chloride solutions

Complexing [PdCl₄]^2? with calix[4]arenes (L) functionalized by CH₂SR (R = Me (1), n-Bu (2), or p-Tol (3)) in their upper rims has been studied in toluene and CCl₄. The stoichiometry of the extracted palladium species (PdCl₂) _n L, where n = 1 or 2 is established by spectroscopic methods (NMR spectroscopy, UV/Vis spectrophotometry, atomic absorption) and extraction. For slow coordinative extraction, the concentration constants of complex formation and extraction from chloride solutions are determined using the coupled equilibria method. The kinetic and thermodynamic laws of extraction coincide, and their parameters increase in the following row of the substituents at the sulfur atom: p-Tol < Bu < Me.     

Extraction of gold(III), palladium(II), and platinum(IV) by 1-[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-ylmethyl]-1<Emphasis Type="Italic">H</Emphasis>-1,2,4-triazole from hydrochloric acid solutions

The extraction of gold(III), palladium(II), and platinum(IV) with 1-[[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]methyl]-1H-1,2,4-triazole from hydrochloric acid solutions into toluene has been studied. The extraction follows the anion-exchange mechanism. The concentration constants and thermodynamic parameters of the extraction reaction have been calculated. The reagent is proposed for use in the extraction of the sum of precious metals.     

Evaluation of unsymmetrical dithiodiglycolamide as novel extractant for application in selective separation of palladium(II) from aqueous solutions

A novel unsymmetrical multidentate ligand namely; N,N'-dimetyl-N,N'-didecyldithiodiglycolamide (DMD³TDGA) was synthesized and used as agent for the selective extraction of palladium(II) from hydrochloric acid solutions. A systematic investigation was carried out on the extraction of Pd(II) using DMD³TDGA. The quantitative extraction of Pd(II) with DMD³TDGA in n-dodecane is observed at ~4 M HCl. The main extracted species of Pd(II) is PdC_l2. DMD³TDGA and IR spectra of the extracted species were investigated. The extraction of palladium(II) from various concentrations of hydrochloric acid solutions in the presence of metal ions, such as Pt(IV), Rh(III), Cr(II), Ni(II), Fe(III), Nd(III), Zr(II), and Mn(II) was carried. DMD³TDGA showed very high selectivity and extractability for Pd(II). Quantitative back extraction of Pd(II) was obtained in single contact using thiourea solution. The results obtained indicated that, excellent separation of Pd(II) from the investigated metal ions can be achieved. Five successive cycles of extraction/back-extraction, indicating excellent stability and re-utilization of this new extractant can be used for selective separation of Pd(II) from other elements in hydrochloric acid medium.     

Extraction and complexation of Cu(II) with undecanoic acid <Emphasis Type="Italic">N,N</Emphasis>-diethylhydrazide

A new reagent, undecanoic acid N,N-diethylhydrazide, was synthesized, and its pK _a1 was determined. The reagent recovers Cu(II) to 99–100% from solutions whose acidity ranges from pH 6 to 1 M NH₃. Copper(II) is extracted in the form of a neutral complex of the composition Cu(II):reagent = 1:2. The reagent is incorporated in the complex in the deprotonated form. An equation for the extraction of Cu(II) from ammonia solutions was suggested. The extraction isotherm was constructred. Ammonium salts, when present in solution, considerably decrease the degree of copper extraction. The reagent is less efficient extractant of copper than N,N-diethylbenzhydrazide.     

Extraction of palladium(II) from hydrochloric acid solutions by (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)-pentan-3-ol

The extraction properties of (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)-pentan-3-ol (with chloroform as a diluent) with respect to palladium(II) were studied. Palladium(II) was found to be efficiently extracted by the reagent from 0.1–6 M HCl solutions by the coordination mechanism. The rate of palladium(II) recovery depends on the hydrochloric acid and chloride ion concentrations in the aqueous phase. Conditions for the selective separation of palladium(II) and copper(II) from nickel(II), cobalt(II), and iron(III) were determined.     

Extraction and concentration of palladium(II) from simulated refining process solutions using 1<Emphasis Type="Italic">Н</Emphasis>-1,2,4-triazole derivatives

A procedure was developed for recovery and concentration of residual palladium(II) from a “lean” refining solution by extraction with 1Н-1,2,4-triazole derivatives. Palladium(II) is extracted quantitatively from 1 M hydrochloric acid solutions and under optimum conditions is selectively separated from platinum(IV) and rhodium(III).     

Coagulation and heterocoagulation interactions of components in aqueous dispersed systems microcrystalline cellulose–TiO<Subscript>2</Subscript>, microcrystalline cellulose–TiOSO<Subscript>4</Subscript>, and TiO<Subscript>2</Subscript>–TiOSO<Subscript>4</Subscript>

A procedure was developed for recovery and concentration of residual palladium(II) from a “lean” refining solution by extraction with 1Н-1,2,4-triazole derivatives. Palladium(II) is extracted quantitatively from 1 M hydrochloric acid solutions and under optimum conditions is selectively separated from platinum(IV) and rhodium(III).     

Synthesis and crystal structure of polymeric thiocyanato-bridged copper(II) complex with 4-nitro-2-[(2-piperidin-1ylethylimino)methyl] phenolate

A polymeric thiocyanato-bridged Schiff base copper(II) complex [Cu(L)(NCS)] _n , where L is 4-nitro-2-[(2-piperidin-1-ylethylimino)methyl]phenolate, has been synthesized and structurally characterized by elemental analysis, infrared spectra, and single crystal X-ray diffraction. The complex crystallizes in the monoclinic space group P2₁ with a = 8.527(5), b = 10.296(6), c = 9.697(6) Å, β = 103.77(2)°, V = 826.8(8) ų, Z = 2. In the complex, the Cu atom is in a square pyramidal coordination with one O and two N donor atoms of the Schiff base ligand and with one thiocyanate N atom, defining the basal plane, and with one symmetry related thiocyanate S atom occupying the apical position. The thiocyanate ligand links the Cu atoms through the end-to-end bridging mode.     

Structure and EPR spectra of binuclear copper(II) complexes with acyldihydrazones of benzenedicarboxylic acids and 5-substituted 2-hydroxyacetophenones

Binuclear copper(II) complexes with acyldihydrazones of 1,3- or 1,4 benzenedicarboxylic acid and 5-methyl- or 5-bromo-2-hydroxyacetophenone in which coordination polyhedra are connected by an aromatic bridge have been synthesized and studied. The structure of the copper(II) complex with diacylhydrazone of isophthalic acid and 2-hydroxy-5-methylacetophenone (H₄L) of composition [Cu₂L · 3Py] was studied by X-ray diffraction. The crystals are monoclinic: a = 12.1996(12) Å, b = 17.7295(17) Å, c = 17.9339(17) Å, β = 109.7450(10)°, space group P2₁/n, Z = 4. The complex is of the “dimer of dimers” type and contains two binuclear subunits that bind together into a centrosymmetric dimer owing to the coordination of the copper cation to the phenoxyl oxygen atom of a neighboring binuclear molecule to form the Cu₂O₂ moiety, in which the copper atoms are 3.409 Å apart. The distance between the copper(II) cations in the binuclear subunit is 8.56 atoms (2N + O) of the doubly deprotonated acylhydrazone moiety and the nitrogen atom of the pyridine molecule. One of the copper cation is additionally coordinated to an extra pyridine molecule so that its coordination sphere is completed to a tetragonal pyramid. The second copper atom is involved in additional interaction with the phenoxyl oxygen atom of the neighboring molecule. The EPR spectra of solutions of the binuclear complexes show an isotropic signal of four HFS lines (g _o = 2.065–2.143, a _Cu = 52.1–66.5 × 10^?4 cm^?1) typical of mononuclear copper(II) complexes.     

Study on extraction of cobalt(II) by sodium laurate/pentan-1-ol/heptane/NaCl microemulsion system

A microemulsion consisting of sodium laurate, n-pentanol, n-heptane and NaCl solution was investigated for Co(II) extraction. The dilution method and conductivity method were used for the determination of structural parameters of sodium laurate/pentan-1-ol/heptane/NaCl microemulsion system. Co(II) was found to be extracted into the microemulsion phase due to the compound formation of [CoCl]⁺[R₁₁COO]^?, which was confirmed by the continuous variation of R₁₁COONa concentration. Moreover, the effects of cosurfactant, the contact time, the phase ratios, PH and the NaCl concentration in feed solutions on the cobalt extraction yield were investigated. Under the optimum conditions, the extraction percentage of Co(II) could reach 98.9%.     

Synthesis and crystal structures of two Schiff base copper(II) complexes derived from 4-chloro-2-[(2-morpholin-4-ylethylimino)methyl]phenol

A centrosymmetric mononuclear copper(II) complex, [Cu(L¹)₂] (I), and a phenolate oxygen-bridged dinuclear copper(II) complex, [Cu₂(L²)₄] (II) (HL¹ = 4-chloro-2-[(2-morpholin-4-ylethylimino)methyl]phenol, HL² = 4-chloro-2-(cyclohexylimino-methyl)phenol), were synthesized and characterized by elemental analyses, IR, and single crystal X-ray diffraction. The crystal of I is monoclinic: space group {ITP}2₁/n, a = 13.396(3), b = 5.339(1), c = 19.740(4) Å, β = 108.64(3), V = 1337.8(5) ų, {ITZ} = 2. The crystal of II is monoclinic: space group P2₁, a = 9.157(2), b = 22.715(4), c = 12.169(2) Å, = 95.28(3), {ITV} = 2520.4(8) Å3, {ITZ}= 2. The Cu atom in I, lying on the inversion center, is four-coordinate in a square planar geometry with two phenolate oxygen and two imine nitrogen atoms. Each Cu atom in II is five-coordinate in a square pyramidal geometry with two phenolate oxygen and two imine nitrogen atoms from two L² ligands defining the basal plane and with one phenolate oxygen atom of another L² ligand occupying the apical position.     

Syntheses and crystal structures of copper(II) and nickel(II) complexes derived from 2-bromo-4-chloro-6-[(2-methylaminoethylimino)methyl]phenol

A new centrosymmetric mononuclear copper(II) complex [Cu(L)₂](ClO₄)₂ (I) and a new centrosymmetric mononuclear nickel(II) complex [Ni(L)₂(MeOH)₂](ClO₄)₂ (II), where L is the zwitterionic ligand 2-bromo-4-chloro-6-[(2-methylammonioethylimino)methyl]phenolate, have been prepared from the Schiff base 2-bromo-4-chloro-6-[(2-methylaminoethylimino)methyl]phenol with copper perchlorate and nickel perchlorate, respectively. The complexes were characterized by elemental analysis, infrared spectra, and single-cyrstal X-ray diffraction (CIF files CCDC nos. 1408054 (I) and 1407973 (II)). Complex I crystallizes in the monoclinic space group P2₁/c with unit cell dimensions a = 7.7736(4), b = 21.608(1), c = 8.5194(4) Å, β = 93.907(2)°, V = 1427.7(1) ų, Z = 2, R ₁ = 0.0546, and wR ₂ = 0.1531. Complex II crystallizes in the monoclinic space group P2₁/c with unit cell dimensions a = 21.324(3), b = 16.821(2), c = 9.425(1) Å, β = 90.114(2)°, V = 3380.5(7) ų, Z = 4, R ₁ = 0.0693, and wR ₂ = 0.1627. The Cu atom in I is in square planar coordination, and the Ni atom in II is in octahedral coordination.     

New coordination modes of iminodiacetamide type ligands in palladium(II) complexes: crystallographic and DFT studies

The reactions of N-alkyliminodiacetamide derivatives, namely N-ethyliminodiacetamide (CH₃CH₂N(CH₂CONH₂)₂; Etimda) and N-isopropyliminodiacetamide (CH₃)₂CHN(CH₂CONH₂)₂; i-Primda), with sodium tetrachloropalladate(II) in aqueous solutions were investigated. Three new palladium(II) complexes, [Pd(Etimda_?H)₂]?2H₂O (1), [Pd(i-Primda_?H)₂]?2H₂O (2) and [PdCl₂(i-Primda)] (3), were obtained and characterized by X-ray structural analysis, infrared spectroscopy and thermal analysis (TGA). The square planar coordination environments around the palladium(II) ions in complexes 1 and 2 consist of two N,N′-bidentate N-alkyliminodiacetamidato ligands, with imino N atoms in trans-position. The complex 3 also exhibits a square planar coordination environment around Pd(II), but with two chloride ions and one neutral N-isopropyliminodiacetamide ligand bound in an N,O′-bidentate coordination mode. The described coordination modes, as well as the presence of deprotonated amide groups in ligands in 1 and 2, are found for the first time in palladium(II) complexes with iminodiacetamide type ligands. The molecular geometries and infrared spectra of these three complexes were also modelled using DFT calculations, at the BP86-D3/def2-TZVPP/PCM level of theory. The RMSD values suggest a good agreement of the calculated and experimental geometries. A QTAIM analysis suggests a qualitative correlation between bond lengths and energy densities, also supported by an NBO analysis. The dimer interaction energy between complex units was estimated at about ?15 kcal/mol for all complexes.     

Selective extraction of Cs(I) using 1,3-[(2,4-diethylheptylethoxy)oxy]-2,4-crown-6-calix[4]arene in ionic liquid solvents and its application to the treatment of high-level liquid waste

To separate heat-generating Cs from high-level liquid waste (HLLW), the extraction of Cs(I) using 1,3-[(2,4-diethylheptylethoxy)oxy]-2,4-crown-6-calix[4]arene (calix[4]arene-R14) in combination with 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) ionic liquids ([C _n mim][NTf₂], where n?=?2, 4, and 6) was investigated. Under moderately acidic conditions, the calix[4]arene-R14/[C _n mim][NTf₂] system showed a higher extraction efficiency (E_Cs) than that exhibited by the conventional calix[4]arene-R14/dichloromethane system. All extraction processes reached equilibrium within 5 min. Slope analysis revealed that the Cs:calix[4]arene-R14 inclusion complex has a 1:1 stoichiometry. The extraction was found to be exothermic and influenced by the presence of Na(I). These extraction systems exhibited high efficiency and selectivity for Cs(I) in simulated HLLW.     

Synthesis and crystal structures of cobalt(III) and zinc(II) complexes derived from 4-chloro-2-[(2-morpholin-4-ylethylimino)methyl]phenol with urease inhibitory activity

A new mononuclear cobalt(III) complex, [CoL₂(N₃)]₂ · CH₃OH (I), and a new mononuclear zinc(II) complex, [ZnLCl(CH₃OH)] (II) (HL = 4-chloro-2-[(2-morpholin-4-ylethylimino)methyl]phenol), were prepared and structurally characterized by elemental analyses, infrared spectroscopy, and single- crystal X-ray diffraction. The crystal of I is monoclinic: space group P2₁/c, a = 18.742(2) Å, b = 15.197(2) Å, c = 25.646(2) Å, β = 125.996(3)°, V = 5909.8(11) ų, Z = 4. The crystal of II is monoclinic: space group P2₁/c, a = 7.257(1) Å, b = 24.707(2) Å, c = 9.637(1) Å, β = 101.557(2)°, V = 1692.9(3) ų, Z = 4. The Co atom in I is in an octahedral coordination, and the Zn atom in II is in a trigonal-bipyramidal coordination. The urease inhibitory test shows that complex I has strong urease inhibitory activity, while complex II has no activity.     

Versatility and reactivity of salicylaldehyde <Emphasis Type="Italic">S</Emphasis>-methylisothiosemicarbazone in palladium(II) complexes

New palladium(II) complexes, [Pd(HL)Cl] · H₂O (I) and {K[Pd(L¹)(NO₂)] · H₂O}₂, with S-methylisothiosemicarbazone of salicylaldehyde (H₂L) and its derivative (H₂L¹) were synthesized. X-ray diffraction analysis demonstrated the ambident nature of S-alkylated thiosemicarbazone, which is attached to palladium(II) through O, N, and S donor atoms in I and through O, N, and N atoms in II. This is the first known case of metal coordination of the alkylated sulfur atom of a thiosemicarbazide moiety of the ligand. A mechanism of nitrosation of the terminal amide nitrogen atom of the H₂L¹ ligand during complexation was proposed.     

Binuclear Au(III)-Pd(II) complex with deprotonated diethylenetriamine as a bridging ligand: Synthesis and crystal structure

The heterobinuclear complex [AuCl(μ-Dien*)PdCl₃] (Dien* is deprotonated diethylenetriamine) was obtained and examined by X-ray diffraction analysis. Crystals are orthorhombic: a = 13.886(3) Å, b = 7.213(1) Å, c = 11.824(2) Å, V = 1184.3(4) ų, space group Pna2₁, Z = 4, _calcd = 3.070 g/cm³, R = 0.02. The coordination entities of gold and palladium are AuN₃Cl and PdNCl₃, respectively. The central N(2) atom of deprotonated diethylenetriamine is the shared vertex of the coordination squares of gold and palladium.     

Copper(II) complex with 3-(2-hydroxy-3-sulfo-5-nitrophenylhydrazo)pentane-2,4-dione: Synthesis and structure

The copper(II) complex with 3-(2-hydroxy-3-sulfo-5-nitrophenylhydrazo)pentane-2,4-dione (H₃L) is studied, and its crystal structure is studied by X-ray diffraction analysis. The crystals of [Cu(H₂O)₂]₂(μ-L)₂[Cu(H₂O)₄] (I) are triclinic (space group P \(\bar 1\)) at 100 K, a = 7.085(3), b = 10.373(5), c = 12.265(6) Å, α = 0.842(5)°, β = 104.996(6)°, γ = 99.156(6)°, Z = 1). The C=O and NH groups of hydrazone and the OH and SO₃H groups from the aromatic moiety of the molecule are involved in coordination with the copper(II) atom. In the centrosymmetric trinuclear molecule the central Cu(2) atom has the coordination number six, and the terminal Cu(1) atoms have the coordination number five. The thermal properties of complex I are studied. The complex formation of copper(II) with the H₃L ligand in an aqueous solution at temperatures 298 ± 0.5, 308 ± 0.5, and 318 ± 0.5 K is studied by potentiometric titration. The standard thermodynamic functions of the complex formation are determined.     

Platinum(II) and platinum(IV) chloro complexes with (<Emphasis Type="Italic">RS</Emphasis>)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1Н-1,2,4-triazol-1-ylmethyl)pentan-3-ol

Platinum(II) and platinum(IV) chloro complexes with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1Н-1,2,4-triazol-1-ylmethyl)pentan-3-ol (L), namely, cis-[PtCl₂L₂], trans-[PtCl₂L₂], and trans-[PtCl₄L₂], were synthesized. The structures of their coordination cores and the coordination mode of the reagent to the metal ions via the N(4) atom of the triazole ring were determined by electronic, IR, and NMR ¹H and ¹³C spectroscopy. The ratio between treo and erythro diastereomers and the conformation of reagent L in the complexes were established from the complete assignment of signals in their NMR spectra.