Simultaneous voltammetric determination of dopamine and ascorbic acid at an electrode modified with the gold-palladium binary system

The catalytic activities of gold, palladium, and rhodium particles and their binary systems electrodeposited on the surface of a glassy-carbon electrode in the oxidation of dopamine and ascorbic acid are compared. As compared to individual noble metals, the Au-Pd binary system exhibits a higher catalytic activity that manifests itself in a multiple increase in the oxidation current of the mediator and in a decrease in the oxidation potential of the substrate. It is found that dopamine and ascorbic acid can be simultaneously determined by voltammetry at an electrode modified with the Au-Pd binary system. The catalytic currents of substrate oxidation are linear functions of the concentrations in the ranges from (1 × 10^?3 to 1 × 10^?7) M for dopamine and from (5 × 10^?3 to 1 × 10^?6) M for ascorbic acid.     

Flow-injection spectrophotometric determination of chloride with an on-line solid mercury(II) thiocyanate minicolumn and bromide with a silver thiocyanate minicolumn

Flow-injection spectrophotometric procedures are described for the determination of chloride and bromide using on-line solid mercury(II) thiocyanate and silver thiocyanate minicolumns, respectively. The linear response ranges for chloride and bromide are 0.28 × 10^?4?8.5 × 10^?4 M and 0.38 × 10^?4?2.4 × 10^?4 M, respectively. The sample throughput for both systems is 100 h^?1. The lifetime of the minicolumns is 50 and 200 injections, respectively.     

Fluorescence Enhancement of Rare Earths by Yttrium and its Application

Abstract

A study of the enhancement effect on the fluorescence intensity of the Eu³⁺–-thenoyltrifluoroacetone (TTA)–-cetyltri–-methylammonium bromide (CTMAB) and the Dy³⁺ pyrocatechol–-3,5-disulphonic acid (Tiron) systems by Y³⁺has been carried out. In the presence of yttrium the fluorescence intensity of the systems was enhanced by a factor of about 100 and 15, respectively. The fluorescence intensity was a linear function of the concentration of europium or dysprosium in the range 1.0 × 10^?10–-1.0 × 10^?8mol dm^?3 and 8.0 × 10^?8–-9.0 × 10^?6mol dm^?3, respectively. The detection limit was 1.0 × 10^?11mol dm^?3 and 1.0 × 10^?10mol dm^?3, respectively. The standard addition method was used for the determination of europium or dysprosium in rare earth oxides and gave satisfactory results. The mechanism of enhanced fluorescence was proposed.     

Comparative study of potentiometric and amperometric tissue-based electrodes for oxalate

Acetone-precipitated pulp from banana skins is physicall entrapped at the tip of a carbon dioxide gas-sensor and on a hydrogen peroxide sensor probe to determine oxalate potentiometrically and amperometrically in aqueous solution and inurine. The enzyme present in the tissue is oxalate oxidase. The potentiometric response has a slope of 47–50 mV/decade for 1 × 10^?4 M–2 × 10^?3 M oxalate with a detection limit of 2 × 10^?5 M. The amperometric response is linear for 2 × 10^t-5–3 × 10^?4 M oxalate with a dectection limit of 2 × 10^?6 M. Average recoveries of oxalate added to aqueous samples were 96.2% and 98.0%, and average relative standrd deviations were 3.8% and 3.6% for the potentiometric and amperometric systems, respectively. Oxalate was determined in six control urine samples, with relative errors of about 2.5%, by both electrode systems after a simple clean-up.     

Synthesis and properties of polymeric analogs of ionic liquids

A number of methacrylate ionic monomers with different structures and mobilities of ionic centers were synthesized. The free-radical polymerization of these monomers in solution affords high-molecular-mass (M _sD = 0.5 to 2.5 × 10⁶) thermally stable (T _dec > 170°C) polyelectrolytes or cationic or anionic “polymeric ionic liquids.” The conductivities of polycation- and polyanion-derived coatings are (7.4 × 10^?10)?(7.6 × 10^?7) and (4.9 × 10^?10)-(1.6 × 10^?7) S/cm (25°C), respectively. As exemplified by poly(1-[3-(methacryloyloxy)propyl]-3-methylimidazolium bis[(trifluoromethanesulfonyl)imide]), the molecular mass and glasstransition temperature of the polymer affect the ionic conductivity of the film coating. The transition from linear polyelectrolytes to crosslinked systems based on ionic monomers and poly(ethylene glycol dimethacrylate) 750 leads to the formation of elastic films featuring satisfactory strength, reduced glass-transition temperatures (?8 to +15°C), and increased ionic conductivity (up to 3.2 × 10^?6 S/cm (25°C)).     

Flow injection determination of hydrogen peroxide using diperiodatoargentate- and diperiodatonickelate-luminol chemiluminescence

A novel chemiluminescence (CL) method for the determination of hydrogen peroxide is described. Method is based on the transition metals in highest oxidation state complex, which include diperiodatoargentate (DPA) and diperiodatonickelate (DPN) and show excellent sensitisation on the luminol-H₂O₂ CL reaction with low luminol concentration in alkaline medium. In particular, the sensitiser which was previously reported (such as Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Fe³⁺, Cr³⁺, KIO₄, K₃Fe(CN)₆ etc.) to be unobserved CL due to poor sensitisation with such low concentration of luminol which makes the method hold high selectivity. Based on this observation, the detection limits were 6.5?×?10^?9?mol?L^?1 and 1.1?×?10^?8?mol?L^?1 hydrogen peroxide for the DPN- and DPA-luminol CL systems, respectively. The relative CL intensity was linear with the hydrogen peroxide concentration in the range of 2.0?×?10^?8–6.0?×?10^?6?mol?L^?1 and 4.0?×?10^?8–4.0?×?10^?6?mol?L^?1 for the DPN- and DPA-luminol CL systems, respectively. The proposed method had good reproducibility with a relative standard deviation of 3.4% (8.0?×?10^?7?mol?L^?1, n?=?7) and 1.0% (2.0?×?10^?6?mol?L^?1, n?=?7) for the DPN- and DPA-luminol CL systems, respectively. A satisfactory result has been gained for the determination of H₂O₂ in rainwater and artificial lake water by use of the proposed method.     

Flow-injection determination of paraoxon by inhibition of immobilized acetylcholinesterase

Two flow-injection methods (continuous-flow and stopped-flow) are proposed for the determination of paraoxon, applying the dual-injection technique and spectrophotometric detection. They are based on the inhibition of the acetylcholinesterase-catalysed hydrolysis of α-naphthyl acetate and subsequent reaction of the α-naphthol produced with p-nitrobenzenediazonium fluoroborate. For the continuous-flow system the calibration graph was linear from 5 × 10^?7 to 1.5 × 10^?5 M, the relative standard deviation (r.s.d.) (n=6) for an 8 × 10^?6 M standard was 1.4%, the limit of detection (3σ) was 4 × 10^?7 M and the sample throughput was ca. 60 h^?1. For the stopped-flow system the linear range was from 1 × 10^?8 to 4 × 10^?7 M, the r.s.d. for a 2.5 × 10^?7 M standard was 0.9%, the limit of detection was 8 × 10^?9 M and the sample throughput was 30 h^?1.     

Kinetics of the gas-phase reactions of NO3 radicals with a series of aromatics at 296 ± 2 K

Rate constants have been determined at 296 ± 2 K for the gas phase reaction of NO₃ radicals with a series of aromatics using a relative rate technique. The rate constants obtained (in cm³ molecule^?1 s^?1 units) were: benzene, <2.3 × 10^?17; toluene, (1.8 ± 1.0) × 10^?17; o? xylene, (1.1 ± 0.5) × 10^?16; m? xylene, (7.1 ± 3.4) × 10^?17; p? xylene, (1.4 ± 0.6) × 10^?16; 1,2,3-trimethylbenzene, (5,6 ± 2.6) × 10^?16; 1,2,4-trimethylbenzene (5.4 - 2.5) × 10^?16; 1,3,5-trimethylbenzene, (2.4 ± 1.1) × 10^?16; phenol, (2.1 ± 0.5) × 10^?12; methoxybenzene, (5.0 ± 2.8) × 10^?17; o-cresol, (1.20 ± 0.34) × 10^?11; m-cresol, (9.2 ± 2.4) × 10^?12; p-cresol, (1.27 ± 0.36) × 10^?11; and benzaldehyde, (1.13 ± 0.25) × 10^?15. These kinetic data, together with, in the case of phenol, product data, suggest that these reactions proceed via H-atom abstraction from the substituent groups. The magnitude of the rate constants for the hydroxy-substituted aromatics indicates that the nighttime reaction of NO₃ radicals with these aromatics can be an important loss process for both NO₃ radicals and these organics, as well as being a possible source of nitric acid, a key component of acid deposition.     

Sensitive spectrophotometric detection of dopamine,levodopa and adrenaline using surface plasmon resonance band of silver nanoparticles

A simple and effective procedure is proposed for spectrophotometric determination of catecholamines; Dopamine (1), L-Dopa (2) and Adrenaline (3). It was found that the reduction of Ag⁺ to silver nanoparticles (Ag-NPs) by these catecholamines in the presence of polyvinylpyrrolidone (PVP) as a stabilizing agent produced very intense surface plasmon resonance peak of Ag-NPs. The plasmon absorbance of the Ag-NPs allows the quantitative spectrophotometric detection of the catecholamines. The calibration curves derived from the changes in absorbance at λ = 440 nm were linear with concentration of Dopamine, Levodopa and Adrenaline in the range of 3.2×10^?6? 2.0×10^?5 M, 1.6×10^?7 ? 1.0×10^?5 M, 1.5×10^?6? 4.0×10^?5 M, respectively. The detection limits (3σ) were 1.2×10^?6 M, 8.6 ×10^?8 M, 9.7 ×10^?7 M for the Dopamine, L-Dopa and Adrenaline, respectively. The method was applied successfully to the determination of catecholamines in Ringer’s injection serum.     

Sensitive determination of tilmicosin,erythromycin ethylsuccinate and clindamycin by CE with electrochemiluminescence detection using azithromycin as internal standard and its applications

A sensitive approach for the simultaneous determination of tilmicosin, erythromycin ethylsuccinate and clindamycin was developed by CE coupled with electrochemiluminescence detection with ionic liquid. The parameters for CE, electrochemiluminescence detection and the effect of ionic liquid were investigated systematically. The three analytes were well separated and detected within 8 min. The limits of detection (S/N=3) of tilmicosin, erythromycin ethylsuccinate and clindamycin are 3.4×10^?9, 2.3×10^?8 and 1.3×10^?8 mol/L, respectively. The precisions (RSD%) of the peak area and the migration time are from 0.8 to 1.5% and from 0.2 to 0.5% within a day and from 1.8 to 2.7% and from 0.6 to 0.8% in 3 days, respectively. The limits of quantitation (S/N=10) of tilmicosin, erythromycin ethylsuccinate and clindamycin are 3.2×10^?8, 2.9×10^?7 and 9.1×10^?8 mol/L in human urines and 5.5×10^?8, 3.2×10^?7 and 2.1×10^?7 mol/L in milk samples, respectively. The recoveries of three analytes at different concentration levels in urine, milk and drugs are between 90.0 and 104.7%. The proposed method was successfully applied to the determination of three analytes in human urine, milk and drugs.     

Non-Newtonian flow curves including lower and upper Newtonian regions for dilute and moderately concentrated polystyrene solutions

The non-Newtonian viscosity in steady flow was measured for solutions of polystyrene (M?_w/M?_n = 1.1) in diethyl phthalate at 30.0°C. In the moderately concentrated solutions, from 6.03 × 10^?2 to 5.62 × 10^?1g/cm³, the viscosity data modified by frictional parameters fit the Graessley theoretical curve for a narrow distribution polymer. The dilute solutions, from 3.26 × 10^?3 to 1.57 × 10^?2 g/cm³, were nonentangled systems whose non-Newtonian properties could be explained by the excluded volume effect as proposed by Fixman. On the basis of the non-Newtonian data, it was concluded that the solution of 3.30 × 10^?2 g/cm³ was a lower critical entanglement concentration, which was distinguished from the usual higher critical concentration for entanglement. This lower critical concentration was also found in the concentration dependence of the activation energy of flow and the absorbance at 310 nm.     

Enzyme electrodes with substrate and co-enzyme amplification

The enzyme couples horseradish peroxidase/glucose dehydrogenase, glucose oxidase/glucose dehydrogenase, and cytochrome b₂/lactate dehydrogenase are applied in enzyme electrodes. Based on amplification by the recyclization reactions catalyzed by these two-enzyme systems, NADH, NAD⁺, glucose, lactate and pyruvate, are determined with 8–40-fold increased sensitivity compared to the unamplified reactions. Detection limits are 1.0 × 10^?6 M NADH, 1.2 × 10^?6 M NAD⁺, 8 × 10^?7 M glucose, and 3 × 10^?7 M lactate or pyruvate.     

Quasielastic neutron scattering measurements of monomer molecular motions in micellar aggregates

Quasielastic neutron scattering measurements have been made on some micellar aggregates. It is shown that the observed spectra arise almost exclusively from monomer motions in the aggregates. Two illustrative systems were studied, direct micelles of tetradecyl trimethyl ammonium bromide in water, and reverse micelles of aerosol OT in cyclohexane with different amounts of water solubilised inside the micellar core. For the aerosol OT micelles, the translational diffusion is fast (8×10^?10 m².sec^?1) and independent of the size of the water pool. Rotational correlation times are of the order of 4×10^?11 sec. At high water contents the water in these pools is similar to bulk aqueous electrolytic solutions. For the tetradecyl trimethyl ammonium bromide micelles the translational diffusion constant was found to be 5×10^?10 m².sec^?1.     

A multivariate calibration procedure for the tensammetric determination of detergents

A multivariate calibration procedure based on singular value decomposition (SVD) and the Ho-Kashyap algorithm is used for the tensammetric determination of the cationic detergents Hyamine 1622, benzalkonium chloride (BACl), N-cetyl-N,N,N-trimethylammonium bromide (CTABr) and mixtures of CTABr and BACl. The sensitivity and accuracy depend strongly on the nature of the detergent. Acceptable accuracy is obtained with a two-step calculation procedure in which calibration constants for the total concentration range of interest are used to guide the choice of a more specific set of calibration constants which are valid for a much smaller concentration span. For Hyamine 1622, concentrations in the range 5 × 10^?6?2 × 10^?4 M could be determined with an accuracy of ± 10^?6 M. For CTABr, these numbers were 3 × 10^?6?2 × 10^?4 M and ± 5 × 10^?7 M; for BACl, they were 2 × 10^?3?9 × 10^?2 g l^?1 and ± 1 × 10^?3 g l^?1. In the mixtures of CTABr and BACl, the accuracies were ± 3 × 10^?6 M and × 1 × 10^?3 g l^?1, respectively.     

Determination of some quinoxaline-N-dioxide derivatives by adsorptive stripping voltammetry

Some derivatives of quinoxaline-N-dioxides, which are used as growth promoters in animals (Carbadox, Cyadox, Olaquindox), can be determined at nanomolar concentrations by stripping volatammetry from a static mercury drop electrode after adsorptive accumulation on the electrode surface. With differential pulse voltammetry, in 0.1 M sodium perchlorate with 5% (v/v) dimethylformamide, the detection limit for Cyadox is 3 × 10^?10 mol 1^?1 after accumulation for 300 s in stirred solution; detection limits are 2 × 10^?9 mol 1^?1 (180 s accumulation) for Carbadox and 7 × 10 mol 1^?1 (60 s accumulation) for Olaquindox. The relative standard deviations are 0.85% for Cyadox (4 × 10^?9 mol 1^?1), 0.54% for Carbadox (2 × 10^?8 mol 1^?1) and 0.95% for Olaquindox (2 × 10^?8 mol 1^?1). Surfactants interfere.     

Organocobalt chelates as initiators of emulsion polymerization of styrene

The kinetics of decomposition of organocobalt chelates in the pH range of 2.2–7.0 has been studied. It has been shown that the rate constant of decomposition of the octyl chelate complex at 20°C changes from ～3 × 10^?3 to ～6 × 10^?6 s^?1 in the above pH range. The rate constants of decomposition of complexes with ethyl, octyl, and cetyl ligands, as estimated at 20°C and pH 8.3, are 1.69 × 10^?4, 1.39 × 10^?4, and 2.42 × 10^?5 s^?1, respectively. As evidenced by emission spectrometry measurements, ～100% of organocobalt chelates with ethyl and isopropyl ligands occur in the aqueous phase, while organocobalt chelates with octyl and cetyl ligands are partitioned between monomer and aqueous phases. The rates of initiation of the emulsion polymerization of styrene have been measured by the inhibited polymerization procedure. It has been demonstrated that among three tested compounds (diphenyl picryl hydrazyl, hydroquinone, and benzoquinone), benzoquinone has been found to be a suitable inhibitor for the polymerization under study. The rates of initiation of styrene polymerization at 30°C for organocobalts with ethyl, octyl, and cyclohexyl ligands are 1.0 × 10^?7, 1.04 × 10^?7, and 3.7 × 10^?6 mol/(l s), respectively. The rate constant of decomposition of the organocobalt complex with the octyl ligand at 30°C is 2.28 × 10^?5 s^?1, and the efficiency of initiation with this complex is 0.95.     

Effects of pH and Concentration on Cs Ions Sorption and Diffusion in Crushed Granite by Using Batch and Modified Capillary Method

A comprehensive evaluation of Cs ions sorption to and diffusion in crushed granite was conducted in this study. The sorption capacity of crushed granite suggested by the Langmuir model was 5.48 × 10^?6 mol‐Cs/g‐granite. The distribution coefficient (Kd) was around 7.5 mL/g and pH independent. By using an in‐diffusion method with a modified capillary column, some diffusion relevant parameters of Cs ions in crushed granite were derived. The apparent diffusion coefficient (Da) seemed unaffected by Cs concentration (1.15 × 10^?10 to 2.82 × 10^?10 m²/s, at 10^?7 and 10^?3 M, respectively). The determined effective diffusion coefficients (De) were located in the window from 8.59 × 10^?10 (10^?7 M) to 1.69 × 10^?9 (10^?3 M) m²/s. Under various pH environments, pH independent Da (9.0 × 10^?9 m²/s) and De (1.0 × 10^?9 m²/s) values were observed. Under current systems, consistently higher De than Da implied the diffusion of Cs ions was governed by surface diffusion phenomenon. Whereas the pH insensitive feature indicated the Cs sorption to crushed granite was mainly through ion‐exchange reaction. Moreover, further SEM/EDS mapping clearly showed the adsorbed Cs ions were highly concentrated on the fracture surface of biotite.     

Study on a Fluorometric Method for the Determination of Protein in Serum Using Quercetin‐Lanthanum (III)‐Sodium Dodecyl Benzene Sulfonate‐Protein System

Abstract

It was found that the fluorescence intensity of lanthanum (III) (La³⁺)‐quercetin (Qu) complex is greatly enhanced by proteins in the presence of sodium dodecyl benzene sulfonate (SDBS). Based on this finding, a new fluorimetric method for the determination of proteins was developed. Under optimum conditions, the enhanced intensity of fluorescence is in proportion to the concentration of proteins in the range of 2.5×10^?8 to 1.0×10^?5 g/mL for bovine serum albumin (BSA), 5.0×10^?8 to 1.5×10^?5 g/mL for human serum albumin (HSA), and 1.0×10^?7 to 1.5×10^?5 g/mL for egg albumin (EA). Their detection limits (S/N=3) are 5.0×10^?9 g/mL, 7.0×10^?9 g/mL, and 2.1×10^?8 g/mL, respectively. The interaction mechanism was also studied.     

Determination of biogenic amines from electrocatalytic responses of graphite electrodes modified with metallic osmium or an osmium oxide-ruthenium cyanide film

Particles of osmium or an inorganic polymeric film of osmium oxide-ruthenium cyanide (OsO-RuCN) electrodeposited on glassy carbon (GC) electrocatalyze the oxidation of dopamine (DA), adrenaline (AD), and noradrenaline (NAD). It is found that these biogenic amines are determined with a high sensitivity by oxidation at an electrode with an OsO-RuCN film. Procedures for the voltammetric determination of DA, AD, or NAD at a composite film electrode are developed. The currents of the substrate oxidation are linear functions of the concentrations in the ranges from 5 × 10^?7 to 1 × 10^?3 M for DA and from 1 × 10^?6 to 1 × 10^?3 M for AD and NAD.     

Potentiometric sensors based on organic ion exchangers for determining tetraalkylammonium salts

Potentiometric sensors with plasticized polymer membranes based on organic ion exchangers, tetraalkylammonium dodecyl sulfates (benzyldimethyldodecylammonium, benzyldimethyltetradecylammonium, dimethyldistearylammonium), have been proposed for the determination of quaternary ammonium salts in model solutions and KATAPAV technical solutions. The thermal stability, composition, and solubility product have been estimated. It has been shown that ion associates are stable to 60?C70°C, K _S varies in the range from 2 × 10^?8 to 5 × 10^?10. The basic electrochemical parameters of the sensors have been determined as well, such as linearity ranges of the electrode function (5 × 10^?5 (5 × 10^?6)?1 × 10^?2 (1 × 10^?3) M) and slopes of the electrode functions (47?C59 mV/pc), response time (60?C90 sec), potential drift (2?C3 mV/day), operation period (3?C4 months), limits of detection for tetramethylammonium salts (1 × 10^?5?4 × 10^?7 M).