Photochemistry of the IrCl<Subscript>6</Subscript><Superscript>2−</Superscript> complex in aqueous solutions in the presence of the bromide anions

Laser flash photolysis (308 nm) was applied to study photochemistry of the IrCl₆ ²⁻ complex in aqueous solutions in the presence of the Br⁻ anions. The formation of the Br₂ ^·− radical anions in the reaction between the Br⁻ ion and secondary radical pair formed after the photon absorption by the initial complex was observed. The Br₂ ^·− radical anions decay both in recombination and in the reaction with the initial IrCl₆ ²⁻ complex.     

Features of high-temperature behavior in NdCaCoO<Subscript>4</Subscript>—the catalyst of the partial oxidation of methane to syngas

The peculiarities of the high-temperature (373–1173 K) behavior and transport properties of NdCaCoO₄, which is a highly active and selective catalyst of the partial oxidation of methane to syngas, were considered. A relationship between its thermal and electrophysical properties and the structure and defectiveness of the oxygen sublattice was found. The electric conductivity of this compound, which is a two-dimensional analog of perovskite, was found to be almost independent of the oxygen pressure (\(p_{O_2 } = 10^{ - 4} - 1\) atm) and to increase with temperature, reaching ～100 S/cm at 1173 K. The temperature dependence of the conductivity of the n-type semiconductor NdCaCoO₄ has two thermoactivation regions (373–573 and 573–873 K), in which the activation energy is almost doubled (0.46 and 0.81 eV, respectively). The discovered tendencies that determine the unique catalytic properties of this material are probably due to the change in the energy spectrum of this compound. The hypothetical reasons for this change are discussed.     

Thermogravimetric study of the reduction of CuO–WO<Subscript>3</Subscript> oxide mixtures in the entire range of molar ratios

The present study reports the results of investigation on the role of metakaolin in the formation of ettringite in a model relevant to Portland cement. The model consists of ternary system (Trio) metakaolin–lime–gypsum. Five samples of defined ternary system were cured at different temperatures 20, 30, 40, 50 and 60 °C. Conduction calorimeter TAM AIR was mainly used to capture heat evolution at different temperatures. Thermoanalytical (simultaneous TGA/DSC) and X-ray diffraction methods were used to identify different products after curing. It results that ettringite is the main hydration product supplemented by calcium silicate and calcium aluminosilicate hydrates according to sample composition. The mechanism and kinetics of hydration, as displayed by calorimetric curves, depend on composition of samples and curing temperatures. Two main types of processes have been elucidated: reaction of aluminum ions with sulfate ones in the presence of calcium ions in aqueous solution to form ettringite supplemented by pozzolanic activity leading to the formation of calcium silicate and calcium aluminosilicate hydrates. Concomitant condensation of alumina and silica species and carbonation have influenced the course of hydration. Activation energy E _a depends slightly on composition of ternary system.     

Formation of the center of ignition in a CH<Subscript>3</Subscript>Cl–Cl<Subscript>2</Subscript> mixture under the action of UV light

The dependence of temperature on time is investigated using a microthermocouple at different distances from a UV light source in a mixture of chlorine and chloromethane. These relationships give an idea of the size and location of a center of photoignition. It is found that if the size of the reaction vessel in the direction of the luminous flux is much greater than the dimensions of the ignition center, the thermal expansion of a reacting gas mixture has a huge impact on such photoignition parameters as the critical concentration limits and the critical intensity of UV radiation. It is found that by increasing the length of the vessel, some chlorinated combustible mixtures lose the ability to ignite when exposed to UV light.     

Synthesis and study of the heat capacity of orthovanadate TbVO<Subscript>4</Subscript> in the range 5–859 K

The heat capacity of TbVO₄ has been measured by the adiabatic calorimetry (5–346 K) and differential scanning calorimetry (344–859 K) methods. The C_p = f(T) plot has an extreme point (32 K). The thermodynamic properties of the oxide compounds have been calculated from the experimental data. A general equation that describes the heat capacity of terbium orthovanadate as a function of temperature in the range 35–859 K has been derived.     

Thermodynamics of the Interaction of the Ni<Superscript>2+</Superscript> Ion with the L-β-Phenyl-α-Alanine Anion in Aqueous Solution

The enthalpies of the interaction of the L-β-phenyl-α-alanine anion with the Ni²⁺ ion in aqueous solution were measured by calorimetry for the ionic strength I = 0.5, 1.0, and 1.5 (KNO₃ as a supporting electrolyte) at 298.15 K. The thermodynamic parameters of the formation of Ni(II) complexes with phenylalanine in aqueous solution were calculated. The effect of the ligand structure on the thermodynamic parameters of complexation reactions in solution was discussed.     

Quantum-chemical study of the role of conical intersections in photoisomerization processes of the [RuCl<Subscript>5</Subscript>NO]<Subscript>2−</Subscript> complex

The potential surfaces of the ground and lowest excited states of the [RuCl₅NO]_2? complex ion were studied by density functional theory. The conical intersections between the potential surfaces of the ground and lowest excited states were found and characterized. The possible routes from the conical intersection points to the ground state and metastable bond isomers were traced. A preliminary scheme, describing photoisomerizations in the complex, was suggested.     

Mechanochemical Activation of Cu–CeO<Subscript>2</Subscript> Mixture as a Promising Technique for the Solid-State Synthesis of Catalysts for the Selective Oxidation of CO in the Presence of H<Subscript>2</Subscript>

A new ecologically clean method for the solid-phase synthesis of oxide copper–ceria catalysts with the use of the mechanochemical activation of a mixture of Cu powder (8 wt %) with CeO₂ was developed. It was established that metallic copper was oxidized by oxygen from CeO₂ in the course of mechanochemical activation. The intensity of a signal due to metallic Cu in the X-ray diffraction analysis spectra decreased with the duration of mechanochemical activation. The Cu¹⁺, Cu²⁺, and Ce³⁺ ions were detected on the sample surface by X-ray photoelectron spectroscopy. The application of temperature-programmed reduction (TPR) made it possible to detect two active oxygen species in the reaction of CO oxidation in the regions of 190 and 210–220°C by a TPR-H₂ method and in the regions of 150 and 180–190°C by a TPR-CO method. It is likely that the former species occurred in the catalytically active nanocomposite surface structures containing Cu–O–Ce bonds, whereas the latter occurred in the finely dispersed particles of CuO on the surface of CeO₂. The maximum conversion of CO (98%, 165°C) reached by the mechanochemical activation of the sample for 60 min was almost the same as conversion on a supported CuO/CeO₂ catalyst.     

Study of the effect of methods for liquid-phase synthesis of nanopowders on the structure and physicochemical properties of ceramics in the CeO<Subscript>2</Subscript>–Y<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Two alternative chemical synthesis methods—cryotechnological coprecipitation of hydroxides and cocrystallization of salts—were used for preparing (CeO₂)_1–x (Y₂O₃) _x nanopowders (x = 0.10, 0.15, 0.20) with a mean coherent scattering domain size of ~7–11 nm and S _sp = 2.1–97.5 m²/g. From these nanopowders, ceramic nanomaterials with mean coherent scattering domain sizes of ~61–85 nm were synthesized. It was studied how the phase composition, microstructure, and electrical transport properties of the produced samples depend on the Y₂O₃ content of a CeO₂-based solid solution and on the synthesis method. It was shown that, in the series (CeO₂)_1–x (Y₂O₃) _x (x = 0.10, 0.15, 0.20), the solid solution (CeO₂)_0.90(Y₂O₃)_0.10 has the highest ionic conductivity with the ion transport number t _i = 0.73 (600°C). In its physicochemical characteristics, this ceramic can be used as a solid electrolyte of intermediate-temperature fuel cells.     

The influence of the organolithium reagent nature on the possibility of the O→C<Subscript>sp</Subscript> migration of the R<Subscript>3</Subscript>Si group in propynes HC≡CCH<Subscript>2</Subscript>OSiR<Subscript>3</Subscript>

A possibility of the O→C_sp 1,4-migration of the R₃Si group in silyl ethers of terminal acetylenic alcohols upon treatment with organolithium reagents (RLi) was studied. In the case of 3-trimethylsilyloxypropyne, depending on the nature of RLi, the heterolysis of the Si—O bond occurs either by the action of acetylide formed as a result of deprotonation with the formation of 3-trimethylsilylprop-2-yn-1-ol trimethylsilyl ether, or by the action of the metalation agent with the formation of propargyl alcohol. The realization of the O→C_sp 1,4-migration of the Me₃Si group requires the use of mild organolithium reagents (lithium hexamethyldisilazanide and diisopropylamide). Silyl ethers having steric hindrance at the carbon atom bonded to the reaction center or around the silicon atom do not react with the studied organolithium reagents.     

Theoretical evaluation of the radiative lifetimes of LiCs and NaCs in the A<Superscript>1</Superscript>Σ<Superscript>+</Superscript> state

Calculations of the adiabatic potential energy curves and the transition dipole moments between the ground (A¹Σ⁺) and the first excited (A¹Σ⁺) states have been determined for the LiCs and NaCs molecules. The calculations are performed using an ab initio approach based on non-empirical pseudopotentials for Cs⁺, Li⁺ and Na⁺ cores, parameterized l-dependent polarization potentials and full configuration interaction calculations. The potential energy curves and the transition dipole moment are used to estimate the radiative lifetimes of the vibrational levels of the A⁺Σ⁺ state using the Franck–Condon (FC) approximation and the approximate sum rule method. The radiative lifetimes associated with the A⁺Σ⁺ state are presented here for the first time. These data can help experimentalists to optimize photoassociative formation of ultracold molecules and their longevity in a trap or in an optical lattice.     

Raman study of the variation in anatase structure of TiO<Subscript>2</Subscript> nanopowders due to the changes of sol–gel synthesis conditions

TiO₂ nanopowders were produced by sol–gel technique under different synthesis conditions. XRD results have shown that obtained nanopowders are in anatase phase, with the presence of a small amount of highly disordered brookite phase, whereas nanocrystallite size and amount of brookite slightly depend on sol–gel synthesis conditions. Raman measurements confirm these results. The analyses of the shift and width of the most intensive anatase E _g Raman mode by phonon confinement model suggest that anatase crystallite size should be in the range between 11 and 15 nm, what is in excellent correlation with XRD results. Obtained results have shown that Raman spectroscopy is a highly sensitive method for the estimation of anatase crystallite size as well as brookite content in TiO₂ nanopowders synthesized by variable sol–gel synthesis conditions.     

Tensimetric investigation of the CrCl<Subscript>3</Subscript>—Cl<Subscript>2</Subscript> system in the temperature range of 600–1200 K

The sublimation pressure of chromium trichloride was measured by the static method with a quartz membrane-gauge manometer in the temperature range of 875–1230 K. An approximating equation for the sublimation pressure vs. temperature was found. The enthalpy (259.4±4 kJ mol^–1) and the entropy (224.2±3.5 J mol^–1 K^–1) of sublimation at 298 K were calculated. For the process 2 CrCl₃(g) + Cl₂(g) = 2 CrCl₄(g), the following values were obtained: _r H°₂₉₈ = –207.1±11.6 kJ mol^–1 and _r S°₂₉₈ = –173.6±10 5 J mol^–1 K^–1.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1561–1564, August, 2004.     

Investigation of the Role of Ionic Liquids in Tuning the p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> Values of Some Anionic Indicators

The effect of imidazolium-based ionic liquids, ([C₁₂mim][Cl] and [C₈mim][Cl]), on the acid-base equilibria of two sulfonated indicators has been studied. The presence of ILs leads to decreased pK _a values because of the stronger electrostatic interaction of cationic ILs with the basic forms of the indicators with more negative charge. The longer alkyl side chain of [C₁₂mim][Cl] compared to [C₈mim][Cl] results in stronger hydrophobic interaction of this IL with the basic forms of the dyes leading to a more effective decrease in the pK _a values. Also, the transition points and transition intervals of the acid-base titration curves of the indicators were affected by the presence of ILs. It was found that the IL interaction with acid-base indicators also results in sharpening the acid-base titration curves of the indicators. From these observations, it is concluded that the presence of ILs can tune the pK _a values of indicators. All the experiments were performed spectrophotometrically and the results were obtained using curve fitting methods.     

Effect of the sequence of chemical transformations on the spatial segregation of components and formation of periclase-spinel nanopowders in the MgO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–H<Subscript>2</Subscript>O System

Specific features of the process in which oxide nanopowders are formed in a hydrothermal treatment of coprecipitated magnesium and iron oxides were studied. It was shown that the rate at which oxide nanoparticles are formed increases when reagents structurally close to the final product are used. It was found that, with the hydrothermal treatment of coprecipitated magnesium and iron hydroxides at 450°C combined with the subsequent thermal treatment in air at temperatures of 400–600°C, it is possible to obtain a homogeneous mixture of nanocrystalline powders based on an iron-containing spinel phase and magnesium oxide.     

<Superscript>119</Superscript>Sn Mössbauer study of the influence of a gas atmosphere on the valence state and distribution of tin atoms in the MgO structure

Analysis of the Mössbauer spectra of dopant ¹¹⁹Sn in cubic MgO has demonstrated that the Sn²⁺ ions can be stabilized on the surface of crystallites of an oxide with a structure differing from the corundum structure. The Mössbauer parameters (at 100 K, the isomer shift is δ = 2.50 ± 0.01 mm/s and the quadrupole splitting is Δ = 2.30 ± 0.02 mm/s) point to the stereochemical activity of the lone pair of Sn²⁺. Being in contact with oxygen at 295 K, tin is rapidly converted to the tetravalent state (δ = 0.08 ± 0.01 mms, Δ = 0.58 ± 0.01 mm/s). The lack of formation of Sn²⁺ on the surface of another cubic oxide (MnO) can be explained by rapid segregation of tin from the bulk of crystallites as stannate clusters.     

Measurement of uranium in small quantities in phosphates by use of γ-ray spectrometry and the 1001 keV peak of <Superscript>234m</Superscript>Pa

Phosphates, naturally containing trace amounts of uranium, were examined using direct γ-ray spectrometry. Both normal and Compton-suppressed counting modes were utilized. The 1001 keV photo peak of the second daughter of ²³⁸U was chosen because of its isolation from other, potentially interfering peaks. The findings suggest that with the aid of Compton suppression, it is possible to quantify low uranium levels in phosphates using samples sizes of order 10 grams within an accuracy of 5%. The uranium content was determined in several sample types and was found to range from 60±4 to 70±8 μg/g, depending on the sample composition. This investigation also considered the effects of sample size, counting time, and counting technique as sources of precision maximization. This work has shown that only a small amount of phosphate is needed to determine the constituent concentration, instead of the standard several hundred grams of material.     

Atomic models of the structure of niobium silicides in Nb–Si <Emphasis Type="Italic">in situ</Emphasis> composites

The results of the investigation of the phase and quantitative composition of reinforcing phases of the Nb–Nb₅Si₃ in situ eutectic composite during high-gradient directional crystallization are reported. The crystal structures of the hexagonal γ and tetragonal α modifications of Nb₅Si₃ silicide are comparatively characterized. Possible structural positions for the stabilizing atoms in the structure of hexagonal silicide are proposed. The dependence of the creep deformation resistance on the silicide structure is discussed.