Dimethyl ether oxidation at elevated temperatures (295-600 K)

Dimethyl ether (DME) has been proposed for use as an alternative fuel or additive in diesel engines and as a potential fuel in solid oxide fuel cells. The oxidation chemistry of DME is a key element in understanding its role in these applications. The reaction between methoxymethyl radicals and O(2) has been examined over the temperature range 295-600 K and at pressures of 20-200 Torr. This reaction has two product pathways. The first produces methoxymethyl peroxy radicals, while the second produces OH radicals and formaldehyde molecules. Real-time kinetic measurements are made by transient infrared spectroscopy to monitor the yield of three main products-formaldehyde, methyl formate, and formic acid-to determine the branching ratio for the CH(3)OCH(2) + O(2) reaction pathways. The temperature and pressure dependence of this reaction is described by a Lindemann and Arrhenius mechanism. The branching ratio is described by f = 1/(1 + A(T)[M]), where A(T) = (1.6(+2.4)(-1.0) x 10(-20)) exp((1800 +/- 400)/T) cm(3) molecule(-1). The temperature dependent rate constant of the methoxymethyl peroxy radical self-reaction is calculated from the kinetics of the formaldehyde and methyl formate product yields, k(4) = (3.0 +/- 2.1) x 10(-13) exp((700 +/- 250)/T) cm(3) molecule(-1) s(-1). The experimental and kinetics modeling results support a strong preference for the thermal decomposition of alkoxy radicals versus their reaction with O(2) under our laboratory conditions. These characteristics of DME oxidation with respect to temperature and pressure might provide insight into optimizing solid oxide fuel cell operating conditions with DME in the presence of O(2) to maximize power outputs.     

Kinetics of hydrolysis of 8-(arylamino)-2'-deoxyguanosines

The 8-(arylamino)-2'-deoxyguanosines, or C-8 adducts, are the major adducts formed by reaction of N-arylnitrenium ions derived from carcinogenic and mutagenic amines with 2'-deoxyguanosine (d-G) and guanosine residues of DNA. The hydrolysis kinetics of three C-8 adducts 1a-c were determined by UV and HPLC methods at 20 degrees C under acidic, neutral, and mildly alkaline conditions. At pH < 2 the dominant hydrolysis process is spontaneous cleavage of the C-N bond of the doubly protonated substrate, 1H(2)(+2) (Scheme 2). The C-8 adducts are 2- to 5-fold more reactive than d-G under these conditions. At 3 < pH < 6 the hydrolysis kinetics are dominated by cleavage of the C-N bond of the monoprotonated nucleoside 1H(+). Under these conditions the hydrolysis kinetics are accelerated by 40- to 1300-fold over that of d-G. The rate increase appears to be caused by a combination of steric acceleration of C-N bond cleavage and a decrease in the ionization constant of 1H(+), K(a1), due to the electron-donating properties of the arylamino C-8 substituent. Under neutral pH conditions a slow (k(obs) approximately 10(-8) s(-1) to 5 x 10(-7) s(-1)) spontaneous cleavage of the C-N bond of the neutral nucleoside, 1, occurs that has not been previously reported for simple purine nucleosides. Finally, under mildly alkaline conditions a process consistent with spontaneous decomposition of the anion 1(-) or OH(-)-induced decomposition of 1 is observed. The latter process has been observed for other purine nucleosides, including the closely related 1d, and involves nucleophilic attack of OH(-) on C-8 to cleave the imidazole ring of the purine.     

Microwave-Assisted Synthesis and Characterization of Poly(2-(dimethylamino)ethyl methacrylate) Grafted Gellan Gum

Poly(2-(dimethylamino)ethylmethacrylate) was grafted on gellan gum (GG) in aqueous medium under microwave irradiation using ammonium persulfate and N,N,N′N′-tetramethylethylenediamine as the initiation system. Grafted copolymers were characterized by FT-IR, TGA, and SEM techniques. The influence of microwave power, exposure time, and composition of the reaction mixture on extent of grafting was studied. Conditions for obtaining the highest degree of grafting were optimized. The rate of grafting was determined from weight measurements. The overall activation energy for grafting is found to be 31.2 kJ/mol, indicating the occurrence of the grafting process with absorption of low thermal energy.     

Determination of the rate constants for the NCO(X2Pi) + Cl(2P) and Cl(2P) + ClNCO(X1A') reactions at 293 and 345 K

The rate constant for the reaction of the isocyanato radical, NCO(X2Pi) with chlorine atoms, Cl(2P), has been measured at 293 +/- 2 and 345 +/- 3 K to be (6.9 +/- 3.8) x 10(-11) and (4.0 +/- 2.2) x 10(-11) cm3 molecules(-1) s,(-1) respectively, where the uncertainties include both random and systematic errors. The measurements were carried out at pressures of 1.3-6.2 Torr with either Ar or CF4 as the bath gas and were independent of both pressure and nature of the third body. Equal concentrations of NCO and Cl atoms were created by 248 nm photolysis of ClNCO. The reaction was monitored by following the temporal dependence of NCO(X2Pi) using time-resolved infrared absorption spectroscopy on rotational transitions of the NCO(10(1)1) <-- (00(1)0) combination band. The reaction rate constant was determined by using a simple chemical model and minimizing the sum of the residuals between the experimental and computer generated temporal NCO concentration profiles. The reaction Cl + ClNCO --> Cl2 + NCO was found to contribute to the observed NCO. The rate constant for this reaction was found to be (2.4 +/- 1.6) x 10(-13) and (1.9 +/- 1.2) x 10(-13) cm3 molecules(-1) s,(-1) at 293 and 345 K, respectively, where the uncertainties include both random and systematic error.     

纳米Cu2O催化二苯甲烷二氨基甲酸苯酯无溶剂热分解制备二苯甲烷二异氰酸酯

研究了无溶剂条件下纳米Cu₂O催化二苯甲烷二氨基甲酸苯酯(MDPC)热分解制备二苯甲烷二异氰酸酯(MDI),考察了纳米Cu₂O的制备条件与反应条件对MDPC热分解反应性能的影响.结果表明,水解法制备的纳米Cu₂O在Ar中于300℃焙烧2h,其催化性能最佳;最佳的反应条件为Cu₂O用量为原料总重的0.06%,反应温度220℃,反应压力0.6kPa,反应时间12min,此时MDPC转化率达到99.8%,MDI选择性86.2%.     

First row transition metal complexes of (E)-2-(2-(2-hydroxybenzylidene) hydrazinyl)-2-oxo-N-phenylacetamide complexes

Manganese(II), iron(II), cobalt(II), nickel(II), copper(II), and chromium(III) complexes of (E)-2-(2-(2-hydroxybenzylidene)hydrazinyl)-2-oxo-N-phenylacetamide were synthesized and characterized by elemental and thermal (TG and DTA) analyses, IR, UV-vis and (1)H NMR spectra as well as magnetic moment. Mononuclear complexes are obtained with 1:1 molar ratio except [Mn(HOS)(2)(H(2)O)(2)] and [Co(OS)(2)](H(2)O)(2) complexes which are obtained with 1:2 molar ratios. The IR spectra of ligand and metal complexes reveal various modes of chelation. The ligand behaves as a monobasic bidentate one and coordination occurs via the enolic oxygen atom and azomethine nitrogen atom. The ligand behaves also as a monobasic tridentate one and coordination occurs through the carbonyl oxygen atom, azomethine nitrogen atom and the hydroxyl oxygen. Moreover, the ligand behaves as a dibasic tridentate and coordination occurs via the enolic oxygen, azomethine nitrogen and the hydroxyl oxygen atoms. The electronic spectra and magnetic moment measurements reveal that all complexes possess octahedral geometry except the copper complexes possesses a square planar geometry. From the modeling studies, the bond length, bond angle, HOMO, LUMO and dipole moment had been calculated to confirm the geometry of the ligands and their investigated complexes. The thermal studies showed the type of water molecules involved in metal complexes as well as the thermal decomposition of some metal complexes. The protonation constant of the ligand and the stability constant of metal complexes were determined pH-metrically in 50% (v/v) dioxane-water mixture at 298 K and found to be consistent with Irving-Williams order. Moreover, the minimal inhibitory concentration (MIC) of these compounds against Staphylococcus aureus, Escherechia coli and Candida albicans were determined.     

Functional metal-porphyrazine derivatives and their polymers. VIII. Catalase-like activity of Fe(III)- and Co(II)-2,9,16,23-tetracarboxyphthalocyanine supported on poly(2-vinylpyridine-CO-styrene)

The decomposition reaction of hydrogen peroxide by Fe(III)- and Co(III)-2,9,16,23-tetracarboxyphthalocyanine supported on poly(2-vinylpyridine-CO-styrene) and the quaternized one, was studied at pH 7.0 in aqueous media. The kinetics of this reaction was also investigated at pH 7.0 by measuring the initial velocity V₀ of the increasing concentration of O₂ with a Warburg respirometer. The reaction proceeded according to the catalaselike mechanism. Fe(III)-2,9,16,23-tetracarboxyphthalocyanine supported on poly(2-vinylpyridine-CO-styrene) was a remarkably effective catalyst for a H₂O₂ decomposition reaction. The coordination sphere around the Fe(III)-phthalocyanine ring was characterized by electronic and ESR spectroscopy. Fe(III)-phthalocyanine supported on the copolymer dispersed in water was the five-coordinated, high-spin type. A typical competitive inhibition in respect of H₂O₂ by CN- was observed. ESR spectrum of this system showed the low spin iron(III) in the octahedral ligand field. The polymer coils hindered undesirable dimerization of metal-phthalocyanine molecules by the shielding effect.     

The solid-state polymerization of cyanotetramminecobalt(III)-μ-cyanoaquotetrammine- cobalt(III) perchlorate: Effect of water vapor pressure

The effect of the water vapor pressure on the solid-state polymerization reaction of cyanotetramminecobalt(III)-μ-cyanoaquotetramminecobalt(III) perchlorate was investigated. The reaction temperature increased with increasing water vapor pressure. At a constant water vapor pressure, the reaction temperature increased as the heating rate increased. A reaction mechanism for these phenomena is postulated.     

在Pt/Al2O3催化剂上苯的内扩散对负0.9级动力学的影响

在Pt/Al₂O₃催化剂上用外循环反应器研究了内扩散对苯完全氧化动力学的影响,当用30～40目(即0.45～0.60mm)催化剂时反应在动力学区域进行.若O₂过量时则动力学区域苯的完全氧化可用-0.9级速率方程描述.当催化剂粒径增至φ6×5mm时,反应在内扩散区域进行并变为一0.1级反应.催化剂有效因子η在0.24～0.12之间.在同一温度下,η_实验随苯分压p_苯的增加而增大;而p_苯相近时,η_实验则随温度的升高而减小.动力学区域的反应活化能为55.5kJ/mol,内扩散区域的反应活化能为34.9kJ/mol,其值约为动力学区域的活化能与苯分子扩散活化能的算术平均值.     

Synthesis,Crystal Structure and Thermal Behavior of 4,5-Dimethoxy-2-(dinitromethylene)imidazolidine

A new energetic material, 4,5-dimethoxy-2-(dinitromethylene)imidazolidine(DMDNI), was synthesized by the reaction of 4,5-dihydroxyl-2-(dinitromethylene)-imidazolidine(DDNI) and methanol, and structurally characterized by single crystal X-ray diffraction. DMDNI crystallized in triclinic space group P, with crystal data a=0.4324(4) nm, b=1.3599(11) nm, c=1.7503(14) nm, α=77.406(14)°, β=84.494(15)°, γ=87.976(14)°, V=0.9997(14) nm³, Z=4, μ＝0.140 mm^-1, F(000)=488, D_c=1.556 g/cm³, R₁=0.0773 and wR₂=0.1574. Thermal decomposition of DMDNI was studied, and its thermal decomposition process was divided into two stages. The first stage was a mel- ting process and the second stage was an exothermic decomposition process. The enthalpy, apparent activation energy and pre-exponential constant of the exothermic decomposition reaction are -491.5 J/g, 142.3 kJ/mol and 10^14.24 s^-1, respectively. The critical temperature of thermal explosion is 162.47℃. DMDNI has a lower thermal stability than DDNI but it is close to that of 4,5-diacetoxyl-2-(dinitromethylene)-imidazolidine(DADNI).     

Reactions of NO2 with BaO/Pt(111) model catalysts: the effects of BaO film thickness and NO2 pressure on the formation of Ba(NOx)2 species

The adsorption and reaction of NO(2) on BaO (<1, ～3, and >20 monolayer equivalent (MLE))/Pt(111) model systems were studied with temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and infrared reflection absorption spectroscopy (IRAS) under ultra-high vacuum (UHV) as well as elevated pressure conditions. NO(2) reacts with sub-monolayer BaO (<1 MLE) to form nitrites only, whereas the reaction of NO(2) with BaO (～3 MLE)/Pt(111) produces mainly nitrites and a small amount of nitrates under UHV conditions (P(NO(2))≈ 1.0 × 10(-9) Torr) at 300 K. In contrast, a thick BaO (>20 MLE) layer on Pt(111) reacts with NO(2) to form nitrite-nitrate ion pairs under the same conditions. At elevated NO(2) pressures (≥1.0 × 10(-5) Torr), however, BaO layers at all these three coverages convert to amorphous barium nitrates at 300 K. Upon annealing to 500 K, these amorphous barium nitrate layers transform into crystalline phases. The thermal decomposition of the thus-formed Ba(NO(x))(2) species is also influenced by the coverage of BaO on the Pt(111) substrate: at low BaO coverages, these species decompose at significantly lower temperatures in comparison with those formed on thick BaO films due to the presence of a Ba(NO(x))(2)/Pt interface where the decomposition can proceed at lower temperatures. However, the thermal decomposition of the thick Ba(NO(3))(2) films follows that of bulk nitrates. Results obtained from these BaO/Pt(111) model systems under UHV and elevated pressure conditions clearly demonstrate that both the BaO film thickness and the applied NO(2) pressure are critical in the Ba(NO(x))(2) formation and subsequent thermal decomposition processes.     

Kinetics and mechanism of the reaction of Cl atoms with CH2 CO (Ketene)

The kinetics and mechanism of the gas-phase reaction of Cl atoms with CH₂CO have been studied with a FTIR spectrometer/smog chamber apparatus. Using relative rate methods the rate of reaction of Cl atoms with ketene was found to be independent of total pressure over the range 1–700 torr of air diluent with a rate constant of (2.7 ± 0.5) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹ at 295 K. The reaction proceeds via an addition mechanism to give a chloroacetyl radical (CH₂ClCO) which has a high degree of internal excitation and undergoes rapid unimolecular decomposition to give a CH₂Cl radical and CO. Chloroacetyl radicals were also produced by the reaction of Cl atoms with CH₂ClCHO; no decomposition was observed in this case. The rates of addition reactions are usually pressure dependent with the rate increasing with pressure reflecting increased collisional stabilization of the adduct. The absence of such behavior in the reaction of Cl atoms with CH₂CO combined with the fact that the reaction rate is close to the gas kinetic limit is attributed to preferential decomposition of excited CH₂ClCO radicals to CH₂Cl radicals and CO as products as opposed to decomposition to reform the reactants. As part of this work ab initio quantum mechanical calculations (MP2/6-31G(d,p)) were used to derive Δ_fH₂₉₈(CH₂ClCO) = −(5.4 ± 4.0) kcal mol⁻¹. © 1996 John Wiley & Sons, Inc.     

Photocatalytic oxidation of the herbicide (4-chloro-2-methylphenoxy)acetic acid (MCPA) over TiO2

The photocatalytic decomposition of the herbicide (4-chloro-2-methylphenoxy)acetic acid (MCPA), C₉H₉ClO₃, in aqueous suspensions containing TiO₂ was investigated by following the formation of intermediates via recording proton NMR spectra. One of theoretically possible intermediates, 4-chloro-2-methylphenolmethanoate, was synthesized by a modified esterification procedure. Based on the data obtained a possible reaction mechanism was proposed. The rate of MCPA aromatic ring decomposition was followed by pH changes during illumination. As a result, apparent reaction rate constant was found to be 7.0×10⁻⁶ mol dm⁻³ min⁻¹. The complete mineralization was attained after about 15 h of illumination.     

Ab initio study of the reaction of propionyl (C2H5CO) radical with oxygen (O2)

The reaction of propionyl radical with oxygen has been studied using the full coupled cluster theory with the complete basis set. This is the first time to gain a conclusive insight into the reaction mechanism and kinetics for this important reaction in detail. The reaction takes place via a chemical activation mechanism. The barrierless association of propionyl with oxygen produces the propionylperoxy radical, which decomposes to form the hydroxyl radical and the three-center alpha-lactone predominantly or the four-center beta-propiolactone. The oxidation of propionyl radical to carbon monoxide or carbon dioxide is not straightforward rather via the secondary decomposition of alpha-lactone and beta-propiolactone. Kinetically, the overall rate constant is almost pressure independent and it approaches the high-pressure limit around tens of torr of helium. At temperatures below 600 K, the rate constant shows negative temperature dependence. The experimental yields of the hydroxyl radical can be well reproduced, with the average energy transferred per collision -DeltaE=20-25 cm(-1) at 213 and 295 K (helium bath gas). At low pressures, together with the hydroxy radical, alpha-lactone is the major product, while beta-propiolactone only accounts for about one-fifth of alpha-lactone. At the high-pressure limit, the production of the propionylperoxy radical is dominant together with a fraction of the isomers. The infrared spectroscopy or the mass spectroscopy techniques are suggested to be employed in the future experimental study of the C2H5CO+O2 reaction.     

Catalytic oxidation of ammonia on RuO2(110) surfaces: mechanism and selectivity

The selective oxidation of ammonia to either N2 or NO on RuO2(110) single-crystal surfaces was investigated by a combination of vibrational spectroscopy (HREELS), thermal desorption spectroscopy (TDS) and steady-state rate measurements under continuous flow conditions. The stoichiometric RuO2(110) surface exposes coordinatively unsaturated (cus) Ru atoms onto which adsorption of NH3 (NH3-cus) or dissociative adsorption of oxygen (O-cus) may occur. In the absence of O-cus, ammonia desorbs completely thermally without any reaction. However, interaction between NH3-cus and O-cus starts already at 90 K by hydrogen abstraction and hydrogenation to OH-cus, leading eventually to N-cus and H2O. The N-cus species recombine either with each other to N2 or with neighboring O-cus leading to strongly held NO-cus which desorbs around 500 K. The latter reaction is favored by higher concentrations of O-cus. Under steady-state flow condition with constant NH3 partial pressure and varying O2 pressure, the rate for N2 formation takes off first, passes through a maximum and then decreases again, whereas that for NO production exhibits an S-shape and rises continuously. In this way at 530 K almost 100% selectivity for NO formation (with fairly high reaction probability for NH3) is reached.     

Partial decomposition of dolomite in CO2

Thermal decomposition of dolomite into CaCO₃ and MgO under CO₂ was investigated by isothermal kinetic measurements, X-ray diffraction analysis, and electron diffraction. The decomposition was described as an interfacial reaction. Crystalline CaCO₃ is formed in an extremely orientated state even if the temperature is higher than the decomposition temperature of calcite, at least at the earlier stage of the decomposition. The crystallites of MgO grow with time and temperature, while the grain size of CaCO₃ remains constant during the isothermal decomposition. The CaCO₃ crystallite size is minimal at about 750°C. The classical theories of the mechanism of the formation of CaCO₃ from dolomite were reexamined, and a direct formation theory was suggested on the basis of the results of X-ray analysis.     

Synthesis of 2-substituted 3-aroylindenes via palladium-catalyzed carbonylative cyclization of diethyl 2-(2-(1-alkynyl)phenyl)malonates with aryl halides

[reaction: see text] The palladium-catalyzed reaction of readily accessible diethyl 2-(2-(1-alkynyl)phenyl)malonates with aryl halides under a balloon pressure of CO produced 2-substitued 3-aroylindenes in good yields. The reaction is believed to proceed via cyclization of the alkyne containing a proximate nucleophilic center promoted by an acylpalladium complex.     

4-(2-Hydroxyaryl)-1,2,3-selenadiazoles as Precursors of Benzofuran-2-selenolates

The reaction of selenium dioxide with o-hydroxyacetophenone semicarbazones gives 4-(2-hydroxyaryl)-1,2,3-selenadiazoles which undergo ready decomposition by the action of potassium carbonate to form benzofuran-2-selenolates. The latter can be alkylated with methyl iodide and benzyl chloride and arylated with 2,4-dinitrochlorobenzene. Intermediate formation of 2-(o-hydroxyphenyl)ethyneselenolate during decomposition of 1,2,3-selenadiazoles was proved by the isolation of methyl o-methoxyphenylethynyl selenide when the substrate was treated with potassium carbonate in the presence of methyl iodide.     

汞(II)-甲基百里酚兰-X(SCN^-,Br^-,I^-)三元混合配位化合物稳定常数的测定

With mercury (II)-methyl thymol blue-X (SCN, Br, I) as example, two methods are investigated in this paper. The first one bases on the variation experimental design, so that classical method of degree of dissociation can be used to calculate the stability constant from the molar ratio curve obtained. This method is simple, adaptable to cases where the decomposition is relatively weak. The second method requires the preliminary acquisition of the equilibrium constant of the decomposition reaction, with the calculation of the stability constant of the preceding formation reaction thereon. The evaluation procedure is more strict. Thhis method is applicable whether the decomposition reaction is strong or weak. Thus, we obtain stability constants of ternary complexes with rather strong subsequent decomposition reaction, such as Hg.MTB.I. Results obtained are rather satisfactory.     

高聚物固体电解质聚氧化乙烯－溴化铜复阻抗谱及介电常数的静水压效应

采用分子量５００万的聚氧化乙烯和无水溴化铜，通过混溶蒸发法制备成高聚物固体电解质Ｐ（ＥＯ）ｎ－ＣｕＢｒ２薄膜，并在０．１～３００ＭＰａ范围不同的流体静水压下详细测量其复平面阻抗谱，分别得到在不同压力下离子电导率和介电常数与测量频率的关系．进一步解谱准确地求出Ｐ（ＥＯ）ｎ－ＣｕＢｒ２（ｎ＝１２、１６）薄膜离子电导率和介电常数的静水压效应，并结合Ｘ－光物相分析，根据离子迁移通道的物理图象和高聚物的极化机构进行了初步的讨论．添加２０％的增塑剂碳酸丙烯酯，较大改进了压力下的导电性．１２０～３００ＭＰａ的离子电导率提高一个数量级