Electrophoretic deposition of TiO2 nanoparticles using organic dyes

Electrophoretic deposition method has been developed for the deposition of TiO(2) nanoparticles modified with organic dyes. Alizarin red, alizarin yellow and pyrocatechol violet dyes were used for the dispersion and charging of TiO(2) in ethanol and anodic electrophoretic deposition of TiO(2) films. The deposition yield was varied by the variation of dye concentration in suspensions and deposition time. Aurintricarboxylic acid dye was used for the deposition of TiO(2) from aqueous suspensions. It was found that thin films of pure aurintricarboxylic acid and composite aurintricarboxylic acid TiO(2) films can be obtained. The deposition yield was studied by quartz crystal microbalance. Dye film thickness was varied in the range of 0.1-2 μm by variation in the deposition time at a constant voltage. The composition of the films and the amount of the deposited material can be varied by the variation of TiO(2) and dye concentration in suspensions and deposition time. The films were studied by Fourier transform infrared spectroscopy, thermogravimetric analysis, differential thermal analysis and electron microscopy. The deposition mechanisms were discussed. The electrophoretic deposition method offers advantages for the fabrication of dye-sensitized TiO(2) films.     

Growth of organic n-conductors on thin polymer films for use in organic field effect transistors

Thin films of different polymers - poly(styrene) (PS), poly(methylmethacrylate) (PMMA), poly(vinylcarbazole) (PVCz), poly(vinylchloride) (PVC) and poly(vinylidene fluoride) (PVDF) - were deposited by spin-coating or by vapor deposition. On these polymers, thin films of (hexadecafluorophthalocyaninato)-oxovanadium (F₁₆PcVO) were prepared by physical vapor deposition. The growth of these films was monitored in situ by optical spectroscopy. The optical absorbance spectra were analyzed based on the coupling of transition dipoles to obtain information on the intermolecular arrangement of chromophores in the films. In all of these samples, the molecules are oriented with their molecular plane preferentially perpendicular to the substrate surface. This gives the desired overlap of the π-systems for electric conductance parallel to the substrate. Differences in the interactions were detected when deposition temperatures below or above the glass transition temperature of a given polymer were compared. The morphology of the polymer films and the deposited semiconductors were investigated by atomic force microscopy and scanning electron microscopy. The influence of the chosen substrate on the film structure is determined. The optical and electric properties of the films could thereby be influenced and the applicability of such films as active layers in organic thin film transistors is discussed.     

Assembly of poly(N-isopropylacrylamide)-co-acrylic acid microgel thin films on polyelectrolyte multilayers: Effects of polyelectrolyte layer thickness, surface charge, and microgel solution pH

Temperature- and pH-sensitive poly(N-isopropylacrylamide)?Cco-acrylic acid (pNIPAm-co-AAc) microgels were deposited on glass substrates coated with polyelectrolyte multilayers composed of the polycation poly(allylamine hydrochloride) (PAH) and the polyanion poly(sodium 4-styrenesulfonate) (PSS). The microgel density and structure of the resultant films were investigated as a function of: (1) the number of PAH/PSS layers (layer thickness); (2) the charge on the outer layer of the polyelectrolyte multilayer film; and (3) the pH of microgel deposition solution. The resultant films were studied by differential interference contrast optical microscopy, atomic force microscopy, and scanning electron microscopy. It was found that the coverage of the microgels on the surface was a complex function of the pH of the deposition solution, the charge on the outer layer of the polyelectrolyte thin film and the PAH/PSS layer thickness; although it appears that microgel charge plays the biggest role in determining the resultant surface coverage.     

Electrophoretic deposition of polyacrylic acid and composite films containing nanotubes and oxide particles

Electrophoretic deposition (EPD) method has been developed for the deposition of thin films of polyacrylic acid (PAA). This method allowed the formation of uniform films of controlled thickness on conductive substrates. It was shown that PAA can be used as a common dispersing agent suitable for charging and EPD of various materials, such as multiwalled carbon nanotubes, halloysite nanotubes, MnO(2), NiO, TiO(2) and SiO(2). The feasibility of EPD of composite films containing the nanotubes and oxide particles in a PAA matrix has been demonstrated. The kinetics of deposition and deposition mechanisms were investigated and discussed. The films were studied by thermogravimetric analysis, differential thermal analysis, X-ray diffraction and scanning electron microscopy. The results indicated that film thickness and composition can be varied. Obtained results pave the way for the fabrication of PAA and composite films for biomedical, electrochemical and other applications.     

Electrophoretic deposition of chiral polymers and composites

Electrophoretic deposition (EPD) method has been developed for the deposition of thin films of chiral polymers. EPD of poly-L-lysine (PLL) and poly-L-ornithine (PLO) films was performed for the first time on conductive substrates from aqueous and ethanol-water solutions. The deposition yield was monitored using a quartz crystal microbalance. The results demonstrated that the deposition yield can be varied by variation of the deposition time, voltage and polymer concentration in the solutions. It was shown that PLL and PLO provided stabilization and charging of hydroxyapatite (HA) nanoparticles in suspensions. Composite PLL-HA and PLO-HA films of controlled thickness were prepared by EPD. Electron microscopy investigations showed that the thickness of the PLL, PLO and composite films was varied in the range of 0-3 μm. The polymer and composite films can be used for biomedical applications.     

Influence of polymeric additives on biomimetic silica deposition on patterned microstructures

Microstructured polymer films prepared by photochemical grafting of different polymers were used as restricted reaction areas in silica deposition experiments. Linear and branched poly(alkyleneimines) and poly(allylamine hydrochloride) in pure aqueous or phosphate-containing solutions were used as additives to silica precursor solutions. The silica deposits obtained by spin-coating these solutions onto microstructured polymer films were investigated by scanning electron microscopy and atomic force microscopy. Experiments with poly(alkylene imines) in the silica precursor solution show the deposition of smooth and granular silica structures that closely mimic the natural patterns. The structure formation can be explained by physicochemical processes. Hypotheses that have been made for the natural silification processes can be evaluated on this basis.     

Electrodeposition of hyaluronic acid and hyaluronic acid–bovine serum albumin films from aqueous solutions

Hyaluronic acid (HYH) films were prepared from aqueous sodium hyaluronate (HYNa) solutions by anodic electrodeposition. The film thickness was varied in the range of 0–20 μm by the variation of the deposition time and HYNa concentration. The deposition rate was low at HYNa concentration below 1 g L⁻¹ and increased significantly in the range of 3–5 g L⁻¹. The addition of bovine serum albumin (BSA) to the HYNa solutions resulted in increased deposition yield, which was attributed to the formation of composite HYH–BSA films. The thickness of the HYH–BSA films deposited by anodic electrodeposition was varied in the range of 0–80 μm. The HYH and composite HYH–BSA films were studied by scanning electron microscopy, thermogravimetric analysis, differential thermal analysis, Fourier transform infrared spectroscopy and circular dichroism spectroscopy. The deposition mechanism and kinetics of deposition are discussed.     

Microstructured reaction areas for the deposition of silica

Patterned films with hexagonal structures were prepared by photochemical grafting of hydrophobic poly(acrylic acid 2-ethyl-hexylester) (PEHAA) as barrier and poly(ethylene imine) (PEI) as reaction area. The films have been characterized by ellipsometry, contact angle measurements, and scanning electron microscopy (SEM). These patterned films have been used in silica mineralization experiments by dipping them into a silica precursor solution. Silica deposition occurs only in PEI-coated areas, resulting in regular arrays of lens-shaped silica particles. The deposited silica was investigated by SEM and atomic force microscopy (AFM). Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Surface characteristics of a self-polymerized dopamine coating deposited on hydrophobic polymer films

This study aims to explore the fundamental surface characteristics of polydopamine (pDA)-coated hydrophobic polymer films. A poly(vinylidene fluoride) (PVDF) film was surface modified by dip coating in an aqueous solution of dopamine on the basis of its self-polymerization and strong adhesion feature. The self-polymerization and deposition rates of dopamine on film surfaces increased with increasing temperature as evaluated by both spectroscopic ellipsometry and scanning electronic microscopy (SEM). Changes in the surface morphologies of pDA-coated films as well as the size and shape of pDA particles in the solution were also investigated by SEM, atomic force microscopy (AFM), and transmission electron microscopy (TEM). The surface roughness and surface free energy of pDA-modified films were mainly affected by the reaction temperature and showed only a slight dependence on the reaction time and concentration of the dopamine solution. Additionally, three other typical hydrophobic polymer films of polytetrafluoroethylene (PTFE), poly(ethylene terephthalate) (PET), and polyimide (PI) were also modified by the same procedure. The lyophilicity (liquid affinity) and surface free energy of these polymer films were enhanced significantly after being coated with pDA, as were those of PVDF films. It is indicated that the deposition behavior of pDA is not strongly dependent on the nature of the substrates. This information provides us with not only a better understanding of biologically inspired surface chemistry for pDA coatings but also effective strategies for exploiting the properties of dopamine to create novel functional polymer materials.     

Influence of shape and surface properties of microstructured reaction areas on the deposition of silica

Differently shaped reaction areas for silica deposition were created by photochemical grafting of hydrophobic poly(acrylic acid 2-ethyl-hexylester) as barrier and a hydrophilic polymer employing a mask having hexagons, pentagons, squares and stripes. Poly(ethylene glycol), poly(acrylic acid), branched and linear poly(ethylene imine) and linear poly(methylpropylene imine) have been applied as hydrophilic polymer in the reaction area. These patterned films have been used in silica mineralization experiments by dipping them into a silica precursor solution. Investigations of the polymer films and silica depositions have been done by contact angle measurements, ellipsometry and scanning electron microscopy (SEM). Silica deposition occurs only in the hydrophilically coated areas, resulting in regular arrays of lens-like silica particles. There are only minor differences due to the shape of the reaction area. The influence of the different hydrophilic polymers can be explained by their wetting behaviour.     

Thermal and environmental stability of poly(4-ethynyl-p-xylylene-co-p-xylylene) thin films

The aim of this paper was to test the thermal and environmental stability of poly(4-ethynyl-p-xylyleneco-p-xylylene) thin films prepared by chemical vapor deposition(CVD) and to optimize the reaction conditions of the polymer.Fourier transformed infrared spectroscopy(FTIR),thermogravimetric analysis(TGA) and fluorescence microscopy were employed to investigate the stability of the reactive polymer coatings in various environmental conditions.Chemical reactivity of the thin films were then tested by Huisgen 1,3-dipolar cycloaddition reaction(‘‘click' reaction).The alkyne functional groups on poly(4-ethynyl-p-xylylene-co-p-xylylene) thin films were found to be stable under ambient storage conditions and thermally stable up to 100 8C when annealed at 0.08 Torr in argon.We also optimized the click reaction conditions of azide-functionalized molecules with poly(4-ethynyl-p-xylylene-co-p-xylylene).The best reaction result was achieved,when copper concentration was 0.5 mmol/L,sodium ascorbate concentration to copper concentration was 5:1.In contrast,the azide concentration and temperature had no obvious effect on the surface reaction.     

Poly(vinyl alcohol)-α-chitin composites reinforced by oil palm empty fruit bunch fiber-derived nanocellulose

Poly(vinyl alcohol)-α-chitin composite films reinforced by oil palm empty fruit bunch fiber-derived nanocellulose were prepared by casting technique. Fourier transform infrared spectroscopy analysis revealed partial miscibility between chitin and poly(vinyl alcohol) through hydrogen bonding, as supported by differential scanning calorimetry and field emission scanning electron microscopy. Tensile strength of the poly(vinyl alcohol)/chitin films increased with α-chitin content varied from 10 to 30?wt%, which was from 29.06 to 39.27?MPa. With the addition of 1?wt% nanocellulose, a maximum improvement of 57.64 and 50.66% in terms of tensile strength and Young’s modulus was achieved, respectively.     

Photolithographically patterned surface modification of poly(dimethylsiloxane) via UV-initiated graft polymerization of acrylates

Patterned surface modification of poly(dimethylsiloxane) (PDMS) is achieved by combining ultraviolet-initiated graft polymerization (UV-GP) and photolithography. Poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA) patterns were grafted onto PDMS with micrometer-scale feature edge resolution. The morphology and chemical composition of the grafted layers were assessed by optical and atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and XPS imaging. AFM section analyses demonstrated the deposition of 33 +/- 1 and 62 +/- 8 nm thick patterned films of PAA and PMAA, respectively. Spatially resolved C 1s XPS provided images of carboxylic acid functionalities, verifying the patterned deposition of acrylate films on PDMS. These observations demonstrate the general usefulness of UV-GP and photolithography for micropatterning.     

Hot filament chemical vapor deposition of poly(glycidyl methacrylate) thin films using tert-butyl peroxide as an initiator

We have demonstrated the successful deposition of poly(glycidyl methacrylate) (PGMA) thin films using hot filament chemical vapor deposition (HFCVD) with tert-butyl peroxide as the initiator. The introduction of the initiator allows for film deposition at low filament temperatures (<200 degrees C) and greatly improves the film deposition rates. The retention of the pendant epoxide chemical functionality and the linear polymeric structure in the deposited films were confirmed by infrared spectroscopy and X-ray photoelectron spectroscopy. The number-average molecular weight of the PGMA films can be systematically varied from 16,000 to 33,000 by adjusting the filament temperature and flow ratio of the initiator to the precursor. The apparent activation energies observed from PGMA deposition kinetics (100.9+/-9.6 kJ/mol) and from molecular weight measurements (-54.8+/-2.0 kJ/mol) are close to the calculated overall activation energies for the polymerization rate (104.4 kJ/mol) and number-average molecular weight (-59.2 kJ/mol), which supports the hypothesis of the free radical polymerization mechanism in the HFCVD PGMA deposition.     

Kinetic studies of glucose oxidase in polyelectrolyte multilayer films by means of scanning electrochemical microscopy (SECM)

Multilayer films of glucose oxidase (GOx) and poly(dimethyl diallyl ammonium chloride) (PDDA) prepared by layer-by-layer deposition were studied using scanning electrochemical microscopy (SECM). Aminated glass slides were coated with five bilayers of poly(styrene sulfonate) (PSS) and PDDA and used as substrates onto which GOx/PDDA multilayers were deposited. UV-Vis experiments confirmed multilayer growth, scanning force microscopic images provided morphological information about the films. SECM current-distance curves enabled the determination of kinetic information about GOx in GOx/PDDA multilayers as a function of layer number, film termination, inert covering layers, and enzyme substrate concentration after fitting to numerical models. The results indicate that only the topmost layers contributed significantly to the conversion. An odd-even pattern was observed for PDDA-terminated films or GOx-terminated films that correlated with morphological changes.     

Structural,optical and electric properties of nanocrystalline MgSe thin films deposited by chemical route using triethanolamine as a complexing agent

Semiconducting nanocrystalline thin films of magnesium selenide have been prepared using economic chemical bath deposition technique onto glass substrates at room temperature. The deposition bath consists of magnesium chloride, triethanolamine, hydrazine hydrate and selenium dioxide. The quantity of triethanolamine in the deposition bath was varied to study its effect on growth process as well as on physical properties of MgSe. The deposited films were characterized using X-ray diffraction, scanning electron microscopy and atomic force microscopy techniques. The effect of complexing agent (TEA) on optical and electrical properties is reported. It was found that as the triethanolamine in deposition bath increases, optical band-gap and electrical resistivity decreases. The thermo-emf measurement shows p-type nature of MgSe.     

Tunable resistive m-dPEG acid patterns on polyelectrolyte multilayers at physiological conditions: template for directed deposition of biomacromolecules

This paper describes a new class of salt-responsive poly(ethylene glycol) (PEG) self-assembled monolayers (SAMs) on top of polyelectrolyte multilayer (PEMs) films. PEM surfaces with poly(diallyldimethylammonium chloride) as the topmost layer are chemically patterned by microcontact printing (muCP) oligomeric PEG molecules with an activated carboxylic acid terminal group (m-dPEG acid). The resistive m-d-poly(ethylene glycol) (m-dPEG) acid molecules on the PEMs films were subsequently removed from the PEM surface with salt treatment, thus converting the nonadhesive surfaces into adhesive surfaces. The resistive PEG patterns facilitate the directed deposition of various macromolecules such as polymers, dyes, colloidal particles, proteins, liposomes, and nucleic acids. Further, these PEG patterns act as a universal resist for different types of cells (e.g., primary cells, cell lines), thus permitting more flexibility in attaching a wide variety of cells to material surfaces. The patterned films were characterized by optical microscopy and atomic force microscopy (AFM). The PEG patterns were removed from the PEM surface at certain salt conditions without affecting the PEM films underneath the SAMs. Removal of the PEG SAMs and the stability of the PEM films underneath it were characterized with ellipsometry and optical microscopy. Such salt- and pH-responsive surfaces could lead to significant advances in the fields of tissue engineering, targeted drug delivery, materials science, and biology.     

Functionalization of solid surfaces with thermoresponsive protein-resistant films

Pulsed plasma polymerization of N-isopropylacrylamide leads to the deposition of thermoresponsive films. The reversible (switching) behavior of these poly(N-isopropylacrylamide) surfaces has been exemplified by screening the adsorption of fibrinogen and fluorescein isothiocyanate labeled bovine serum albumin proteins by surface plasmon resonance (SPR) and fluorescence microscopy at low and elevated temperatures.     

Superhydrophobic surfaces formed using layer-by-layer self-assembly with aminated multiwall carbon nanotubes

A convenient and simple route to functionalized multiwall carbon nanotubes (MWNTs) using the reaction of the amine (NH) groups of polyethyleneimine (PEI) with MWNTs in N,N-dimethylformamide (DMF) at 50 degrees C is described. The product functionalized MWNTs (MWNT-NH-PEI) contain 6-8% by weight PEI based on elemental analysis, thermal gravimetric analysis, and titration. The products form stable emulsions in water below pH 9 and can be derivatized to form alkylated MWNTs that are dispersible in organic media. Such MWNT-NH-PEI nanoparticles can also be used in covalent or ionic layer-by-layer assembly to form nanocomposite thin films on functionalized polyethylene (PE) films and powders. Such nanocomposite films were analyzed by contact angle analysis, atomic force microscopy (AFM), and confocal Raman microscopy. These analyses show that these superhydrophilic surfaces have micro/nanoroughness with a roughly uniform distribution of MWNT nanoparticles. Superhydrophobic PE films can be formed either from ionic layer-by-layer self-assembly of MWNT-NH-PEIs and poly(acrylic acid) or from covalent layer-by-layer self-assembly of MWNT-NH-PEIs and Gantrez if the final graft is acrylated with a mixed anhydride prepared from ethyl chloroformate and octadecanoic acid. The resulting octadecylated surface produced by five covalent layer-by-layer deposition steps has a water contact angle of 165 degrees and a sliding angle of less than 5 degrees. The corresponding surface produced by five ionic layer-by-layer deposition steps has a water contact angle of 155 degrees but exhibits water pinning. The ionically assembled nanocomposite graft is labile under acidic conditions. The covalently assembled graft is more chemically robust.     

Influence of solvent quality on the growth of polyelectrolyte multilayers

The effect of solvent conditions on the growth of polyelectrolyte (PE) multilayer films comprising poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonate sodium salt) (PSS) on planar substrates was investigated by means of surface plasmon resonance spectroscopy (SPRS), quartz crystal microbalance (QCM), and atomic force microscopy techniques. The solvent quality was varied by the addition of ethanol to the PE solutions used for deposition of the layers, thus tuning the relative strength of electrostatic and secondary intermolecular and intramolecular interactions. Experiments were performed with PE solutions both without added electrolyte and containing 0.5 M NaCl. Decreasing the solvent quality (i.e., increasing the amount of ethanol in the adsorption solution) resulted in a marked increase of both the multilayer film thickness and mass loading, as determined from the SPRS spectra and QCM frequency shifts, respectively. With the solution composition approaching the precipitation point, thick PAH/PSS films were formed due to the screening of the electrostatic intra- and interchain repulsions and enhanced hydrophobic interactions between the polyelectrolyte chains. However, the films formed from water/ethanol mixtures remained stable upon subsequent exposure to water or salt-containing solutions: no significant film desorption occurred after up to 24 h of exposure to water or 0.5 M NaCl solutions. In addition, the effect of postdeposition exposure to water/ethanol mixtures was investigated for PE multilayers assembled from aqueous solutions. In this case, the optical thickness of the films was determined during exposure to water/ethanol mixtures, and instead of swelling, the polyelectrolyte films collapse to the surface as a result of the unfavorable segment-solvent interactions.