Single precursor-based luminescent nitrogen-doped carbon dots and their application for iron (III) sensing

Iron III (Fe³⁺) sensing is of great importance for monitoring its levels in different environmental and biological systems since its levels are tightly associated with many environmental concerns and serious diseases. Compared to the ordinary Fe³⁺ detection methods involving the sophisticated and expensive instruments, the use of fluorescent materials with short response time and low cost attracts much attention. Amongst a variety of fluorescent materials, a nitrogen-doped carbon dot (N-CD) is emerging as promising luminescent materials for biosensing due to their superior photoluminescent properties, good water solubility, and biocompatibility. Herein, N-CD prepared via a green and cost-effective one-pot hydrothermal method using a new single precursor N-(2-hydroxyethyl) ethylenediamine triacetic acid (HEDTA) as both the carbon and nitrogen sources is reported. The blue fluorescent emission of N-CDs is quenched by the addition of Fe³⁺, and the quenching intensity is concentration dependent in the wide range (0.76–400 μM) with a detection limit of 0.16 μM. The quantum yield for the as prepared N-CDs is 14.17%. The N-CDs also show a high selectivity for Fe³⁺ chelation amongst a range of biological metal ions. The fluorescent quenching is attributed to the formation of the coordinate covalent bonds between the Fe³⁺ and N-CDs, and the mechanism is proved to be a static type on the basis of the photoluminescence lifetime and the temperature-dependent fluorescent intensity change. Our eco-friendly and simple strategy will benefit the application of CDs in various fields.     

Iron-based catalysts encapsulated by nitrogen-doped graphitic carbon for selective synthesis of liquid fuels through the Fischer-Tropsch process

Fischer-Tropsch synthesis (FTS) has the potential to be a powerful strategy for producing liquid fuels from syngas if highly selective catalysts can be developed. Herein, a series of iron nanoparticle catalysts encapsulated by nitrogen-doped graphitic carbon were prepared by a one-step pyrolysis of a ferric L-glutamic acid complex. The FeC-800 catalyst pyrolyzed at 800 °C showed excellent catalytic activity (239.4 μmol_CO g_Fe^–1 s^–1), high C₅–C₁₁ selectivity (49%), and good stability in FTS. The high dispersion of ferric species combined with a well-encapsulated structure can effectively inhibit the migration of iron nanoparticles during the reaction process, which is beneficial for high activity and good stability. The nitrogen-doped graphitic carbon shell can act as an electron donor to the iron particles, thus promoting CO activation and expediting the formation of Fe₅C₂, which is the key factor for obtaining high C₅–C₁₁ selectivity.     

A Multi‐responsive Regenerable Europium–Organic Framework Luminescent Sensor for Fe3+, CrVI Anions,and Picric Acid

A novel luminescent microporous lanthanide metal–organic framework (Ln‐MOF) based on a urea‐containing ligand has been successfully assembled. Structural analysis revealed that the framework features two types of 1D channels, with urea N?H bonds projecting into the pores. Luminescence studies have revealed that the Ln‐MOF exhibits high sensitivity, good selectivity, and a fast luminescence quenching response towards Fe³⁺, Cr^VI anions, and picric acid. In particular, in the detection of Cr₂O₇^2? and picric acid, the Ln‐MOF can be simply and quickly regenerated, thus exhibiting excellent recyclability. To the best of our knowledge, this is the first example of a multi‐responsive luminescent Ln‐MOF sensor for Fe³⁺, Cr^VI anions, and picric acid based on a urea derivative. This Ln‐MOF may potentially be used as a multi‐responsive regenerable luminescent sensor for the quantitative detection of toxic and harmful substances.     

Porous organic polymer nanotubes as luminescent probe for highly selective and sensitive detection of Fe<Superscript>3+</Superscript>

Two porous organic polymer nanotubes (PNT-2 and PNT-3) were synthesized via Ni-catalyzed Yamamoto reaction, using 2,4,6-tris-(4-bromo-phenyl)-[1,3,5]-triazine (TBT) as one monomer, and 2,7-dibromopyrene (DBP) or 1,3,6,8-tetrabromopyrene (TBP) as another monomer. The scanning electron microscope (SEM) images show that both PNT-2 and PNT-3 possess clear hollow tube structures. Luminescent measurements indicate that both PNT-2 and PNT-3 can serve as luminescent probe for highly selective and sensitive detection of Fe³⁺ by luminescent quenching effect. Absorption competition quenching (ACQ) mechanism is also proposed to explain luminescent quenching behavior, i.e., the overlap of the UV-spectra between Fe³⁺ and PNTs causes the energy competition, and therefore leads to luminescent quenching. Moreover, both PNT-2 and PNT-3 still show high selectivity and sensitivity for sensing Fe³⁺ in 10% ethanol aqueous solution, which means that the two porous PNTs are promising candidates as luminescent probes for detecting Fe³⁺ in practical applications.     

Highly sensitive and selective ratiometric fluorescent copper sensors: Different binding affinities modulated by three separate side chains of naphthalimide

A series of compounds 1-11 with different side chains of naphthalimide as fluorescent copper sensors were designed and synthesized. Compounds 1, 9, 10 and 11 presented a high selectivity to Cu2+ in a neutral aqueous environment. Here 1, 9 and 10 showed selectivity and affinity to Cu2+ with an association constant of about ～106. It gave somewhat response to Ag+, Co2+, Ni2+ and Fe2+ while 1 detected copper. 9 and 10 displayed better selectivity by changing their hydrophobic side chains to the hydrophilic ones...     

Spatially Responsive Multicolor Lanthanide-MOF Heterostructures for Covert Photonic Barcodes

Micro/nanoscale photonic barcodes based on multicolor luminescent segmented heterojunctions hold potential for applications in information security. However, such multicolor heterojunctions reported thus far are exclusively based on static luminescent signals, thus restricting their application in advanced confidential information protection. Reported here is a strategy to design responsive photonic barcodes with heterobimetallic (Tb³⁺/Eu³⁺) metal—organic framework multicolor heterostructures. The spatial colors could be precisely controlled by thermally manipulating the energy-transfer process between the two lanthanides, thus achieving responsive covert photonic barcodes. Also demonstrated is that spatially resolved responsive barcodes with multi-responsive features could be created in a single heterostructure. These findings offer unique opportunities to purposely design highly integrated responsive microstructures and smart devices toward advanced anti-counterfeiting applications.     

Graphene-based materials for the electrochemical determination of hazardous ions

The use of graphene in the field of electrochemical sensors is increasing due to two main properties that make graphene and derivatives appealing for this purpose: their conductivity and high surface area. In addition, graphene materials can be easily functionalized with nanoparticles (Au, Pt, etc.) or organic molecules (DNA, polymers, etc.) producing synergies that allow higher sensitivity, lower limit of detection as well as increased selectivity. The present review focuses on the most important works published related to graphene-based electrochemical sensors for the determination of hazardous ions (such as As(III), Cd²⁺, Pb²⁺, Hg²⁺, Cr(VI), Cu²⁺, Ag⁺, etc.). The review presents examples of the use of graphene-based electrodes for this purpose as well as important parameters of the sensors such as: limit of detection, linear range, sensitivity, main interferences, stability, and reproducibility. The application of these graphene-based electrodes in real samples (water or food matrices) is indicated, as well. There is room for improvement of these type of sensors and more effort should be devoted to the use of doped graphene (doped for instance with N, B, S, Se, etc.) since electrochemically active sites originated by doping facilitate charge transfer, adsorption and activation of analytes, and fixation of functional moieties/molecules. This will allow the sensitivity and the selectivity of the electrodes to be increased when combined with other materials (nanoparticles/organic molecules).     

A pyrene-based dual chemosensor for colorimetric detection of Cu2+ and fluorescent detection of Fe3+

A pyrene based chemosensor was designed and synthesized. The pyrene fluorophore was connected with a pyridine unit through a Schiff base structure to give the sensor (L). L was tested with a variety of metal ions and exhibited high colorimetric selectivities for Cu²⁺ and Fe³⁺ over other ions. Upon binding with Cu²⁺ or Fe³⁺, L showed an obvious optical color change from colorless to pink for Cu²⁺ or orange for Fe³⁺ over a wide pH range from 3 to 12. Moreover, the fluorescence of L at 370 nm decreased sharply after bonding with Fe³⁺, while other metal ions including Cu²⁺ had no apparent interference. Thus, using such single chemosensor, Cu²⁺ and Fe³⁺ can be detected independently with high selectivity and sensitivity. The limits of detection toward Cu²⁺ and Fe³⁺ were 8.5 and 2.0 μM, respectively. DFT calculation results also proved the formation of stable coordination complexes and the phenomenon of fluorescence quenching by Fe³⁺. Furthermore, L was also successfully used as a bioimaging reagent for detection of Fe³⁺ in living cells.     

Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication     

A new luminescent anionic metal–organic framework based on heterometallic zinc(II)–barium(II) for selective detection of Fe3+ and Cu2+ ions in aqueous solution

Over the past two decades, the development of novel inorganic–organic hybrid porous crystalline materials or metal–organic frameworks (MOFs) using crystal engineering has provoked significant interest due to their potential applications as functional materials. In this context, luminescent MOFs as fluorescence sensors have recently received significant attention for the sensing of ionic species and small molecules. In this work, a new luminescent heterometallic zinc(II)–barium(II)‐based anionic metal–organic framework, namely poly[imidazolium [triaqua(μ₆‐benzene‐1,3,5‐tricarboxylato)bariumtrizinc] tetrahydrate], {(C₃H₄N₂)[BaZn₃(C₉H₃O₆)₃(H₂O)₃]·4H₂O}_n ( 1 ), was synthesized under hydrothermal conditions and characterized. Compound 1 presents a three‐dimensional framework with an unprecedented (3,5)‐connected topology of the point symbol (3.9²).(3³.4².5.9³.10), and exhibits `turn‐off' luminescence responses for the Cu²⁺ and Fe³⁺ ions in aqueous solution based on significantly different quenching mechanisms.     

A Series of Carboxylic‐Functionalized Ionic Liquids and their Solubility for Lanthanide Oxides

Herein we report the synthesis of propanoic acid functionalized ionic liquids (ILs) with various lengths of alkyl chain on the imidazole ring. The synthesized propanoic acid functionalized ILs were used to dissolve Eu₂O₃ (or Tb₄O₇) due to the formation of europium(III) (or terbium(III)) carboxylate, aimed to get soft luminescent materials combining the properties of ILs and attractive luminescent properties of lanthanide ions. The luminescent behavior of Eu³⁺ and Tb³⁺ in the ILs were investigated by luminescence spectroscopy. The affect of the alkyl chain on the luminescent behavior (the asymmetry parameter (R), the lifetime of ⁵D₀, and the ⁵D₀ quantum efficiency) of Eu³⁺ has been discussed.     

Mn,B, N co-doped graphene quantum dots for fluorescence sensing and biological imaging

The fluorescent and quantum yield (QY) of graphene quantum dots has been improved in recent years by doped atoms, which have good application prospects in fluorescence sensors and biological imaging. Here, a one-step hydrothermal synthesis method was used to synthesize manganese ions bonded with boron and nitrogen-doped graphene quantum dots (Mn-BN-GQDs). Compared with the boron and nitrogen co-doping graphene quantum dots (BN-GQDs), the fluorescence properties and quantum yield of Mn-BN-GQDs are significantly improved. Meanwhile, Mn-BN-GQDs exhibit low toxicity and good fluorescence imaging in living cells and has high selectivity to Fe³⁺ ions. Therefore, this experiment design Mn-BN-GQDs as a fluorescence sensor to detect Fe³⁺ ions, providing strong evidence for the advanced high sensitivity, selectivity and wide detection range of the Mn-BN-GQDs as a fluorescence sensor. These results indicate a dual linear relationship with good linear relationships in the 10–100 μM and 100–800 μM ranges, and limit of detection are 0.78 μM and 9.08 μM, respectively. Cellular imaging results demonstrate that Mn-BN-GQDs can be used as fluorescence sensors in biological imaging. Mn-BN-GQDs can be used for fluorescence sensing in biological imaging in combination with low toxicity, QY and quantum dot lifetime.     

Selective and Sensitive Two New Macroacyclic Schiff base Fluorescent Turn-Off Receptors for Fe3+, DFT Calculation and Their Antibacterial Activity

Two new Macroacyclic Schiff base chemosensors (L₁ and L₂) were synthesized by the one pot condensation reaction of 2-[3-(2-formyl phenoxy)propoxy]benzaldehyde and aminophenol in a 1:2 molar ratio and were characterized by IR, NMR spectroscopy. Both Schiff bases displayed high selectivity and sensitivity towards Fe³⁺ over other metal ions in H₂O-DMF solution (Ag⁺,Cu²⁺, Ni²⁺, Zn²⁺, Mg⁺², Mn⁺², Pb⁺², Co⁺², Hg⁺², Cr⁺³, Na⁺, Ba⁺² and Cd²⁺) due to their structure including oxygen donor atoms. The test results showed fluorescence quenching of the fluorophores when Fe³⁺ was bound to the recognition units. From test results, a high selectivity for Fe³⁺ were discovered in this type of sensors, especially, the probe based on 2-aminophenol exhibited more significant quenching in fluorescence intensity compared with 4-aminophenol-based due to its rigidity structure. In addition, the structure of ligands and their antibacterial properties was investigated.     

Highly Sensitive and Selective Spectroscopic Detection of Mercury(II) in Water by Using Pyridylporphyrin–DNA Conjugates

Single‐labeled pyridylporphyrin–DNA conjugates are reported as highly sensitive and selective spectroscopic sensors for mercury(II) ions in water. The effects of chemical structure (thymine versus adenine), number of nucleotides (monomer versus octamer), and porphyrin metalation (Zn versus free base) on the sensitivity and selectivity of mercury(II) detection are explored. The results indicated that pyridylporphyrin rather than the nucleobase plays a crucial role in mercury(II) sensing, because porphyrin conjugates with both adenosine and thymidine exhibited excellent mercury(II) detection. Mercury(II) recognition was shown in emission quenching, as well as in a redshift of the porphyrin Soret band absorption. The limit of detection (LOD, 3σ/slope) of zinc(II) pyridylporphyrin‐5′‐oligodeoxythymidine ( ZnPorT8 ) obtained by fluorescence quenching was calculated to be 21.14 nM . Other metal cations (Zn²⁺, Cd²⁺, Pb²⁺, Mn²⁺, Ca²⁺, Ni²⁺, Mg²⁺, Fe²⁺, Cu²⁺, and Na⁺) did not interfere with the emission and absorption sensing of mercury(II). Free‐base porphyrin–oligothymine conjugate 2HPorT8 displayed similar sensitivity to ZnPorT8 but different selectivity. The results also implied that the sensing properties of porphyrin–deoxythymidine conjugates could potentially be tuned by porphyrin metalation.     

Stability of transition metal complexes with sulfonated polymers

Stability constants of macromolecular metallocomplexes of transition metal ions (Ag⁺, Cu²⁺, Ni²⁺, Fe³⁺) with sulfonated polymers in water and aqueous HCl and NaCl solutions were determined from quenching by transition metal ions of the luminescence of macromolecules labeled with luminescent groups.     

Comparative study for N and S doped carbon dots: Synthesis,characterization and applications for Fe probe and cellular imaging

A facile and eco-friendly approach to prepare nitrogen(N)- and sulfur(S)-doped carbon dots (CDs) by one step microwave-assisted pyrolysis of the precursors with dl-malic acid as carbon source, ethanolamine and ethane-sulfonic acid as N and S dopants, respectively, was reported. Through the extensive investigation on morphology, chemical structures and optical properties of the carbon dots, it was found that the obtained CDs exhibited good luminescence stability, high resistance to photo bleaching and favorite solubility. Compared with undoped CDs, adding the N or S dopant could give rise to a slightly smaller particle size and a long fluorescence lifetime of CDs. Moreover, the optimal N-CDs was successfully employed as good multicolor cell imaging probes due to its fine dispersion in water, excitation-dependent emission, excellent biocompatibility and low toxicity. Besides, such N-CDs showed a wide detection range and excellent accuracy as fluorescent probe for Fe³⁺ ions. This probe enabled the selective detection of Fe³⁺ ions with a linear range of 6.0–200 μM and a limit of detection of 0.80 μM.     

A highly selective fluorescent chemosensor for Fe (III) based on rhodamine 6G dyes derivative

A new fluorescent probe L based on the rhodamine 6G platforms for Fe³⁺ has been designed and synthesised. L showed excellent selectivity and high sensitivity for Fe³⁺ against other metal ions such as K⁺, Na⁺, Ag⁺, Cu²⁺, Co²⁺, Mg²⁺, Cd²⁺, Ni²⁺, Zn²⁺, Fe²⁺, Hg²⁺, Ce³⁺ and Y³⁺ in HEPES buffer (10 mM, pH 7.4)/CH₃CN (40:60, V/V). The distinct color change and the rapid emergence of fluorescence emission provided naked-eyes detection for Fe³⁺. The recognition mechanism of the probe toward Fe³⁺ was evaluated by Job’s plots, IR and ESI-MS. In order to further study their fluorescent properties, L + Fe³⁺ fluorescence lifetime was also measured. Moreover, the test strip results showed that these probes could act as a convenient and efficient Fe³⁺ test kit.     

New method for evaluation of heavy metal binding to alginate beads using pH and conductivity data

Extensive research has been conducted for removal and recovery of heavy metals from wastewater and industrial wastewater in recent years. Due to its low cost and high sorption efficiency, alginate was extensively investigated as a biosorbent. It is known that the sorption of metals to alginate is rate limited. However, the sampling in the beginning of experiments, from 30 seconds to few minutes, is very difficult, if not impossible. In this study, a nontraditional experimental method was used to determine the removal kinetics of metals for short time periods. A relationship among pH, conductivity, and metal concentration was established. It was shown that the sorption mechanism was ion exchange for all metals investigated in this study. A series of experiments was conducted to determine the ion exchange kinetics of different metals at varying pH conditions. Second order pseudo rate kinetics was shown to define the experimental findings well. Results also showed that the extent of exchange significantly reduced as the pH decreased. The selectivity of metal exchange to alginate beads was determined. It was observed that the extent of the ion exchange was greatest for Cu^{2 +} and lowest for Mn^{2 +} and Fe^{2 +}, following the order of Cu^{2 +} > Zn²⁺≅ Co^{2 +}≅ Ni²⁺ > Mn²⁺≅ Fe²⁺.     

A dual chemosensor for Cu2+ and Fe3+ based on π-extend tetrathiafulvalene derivative

A new dual chemosensor (TTF-PBA) for Fe³⁺ and Cu²⁺ in different signal pathways was designed and synthesized. The absorption spectrum, fluorescence spectrum and cyclic voltammograms changed in the presence of Cu²⁺ and Fe³⁺. The optical color changed within 5 s from yellow to orange upon the addition of Cu²⁺, and it changed to dark yellow when Fe³⁺ existed. The cyclic voltammogram of Cu²⁺/TTF-PBA changed from E_ox = 0.50 V, E_red = 0.32 V to E_ox = 0.64 V, E_red = 0.80 V (vs Ag/AgCl) upon the addition of 2.0 equiv. Cu²⁺. As for Fe³⁺/TTF-PBA, its oxidation wave disappeared, and its reduction wave appeared at E_red = ?0.59 V (vs Ag/AgCl) upon the addition of 4.0 equv. Fe³⁺. The sensor displayed high selectivity for Cu²⁺ and Fe³⁺ over other ions including Pb²⁺, Zn²⁺, Ni²⁺, Ag⁺, Cr³⁺, Mn²⁺, Al³⁺, Co²⁺, Pd²⁺, Hg²⁺, Fe^2+, Cd²⁺, Ce³⁺, Bi³⁺ and Au³⁺, the detection limits for Cu²⁺ and Fe³⁺ ion reached as low as 5.33 × 10^?7 mol/L and 5.34 × 10^?7 mol/L, respectively. Furthermore, when Fe³⁺ existed, Cu²⁺ can be detected sequentially by the sensor through the absorption spectrum and the color change observed by naked-eyes.     

Synthesis of multidentate functional monomer for ion imprinting

In this work, N,N,N‐tri(2‐carboxyethyl)‐3‐(2‐aminoethylamino)propyl‐trimethoxysilane was prepared as a multidentate functional monomer. The 3D model of the monomer coordinating with Cu²⁺ indicated that the monomer is able to provide five ligating atoms like ethylenediaminetetraacetic acid‐Cu²⁺ to complex with Cu²⁺. When Cu²⁺ was used as a template ion, the synthesis conditions of Cu²⁺‐imprinted polymers were optimized upon orthogonal design. It is interesting to find that Cu²⁺‐imprinted polymer offers a selectivity coefficient of 192.2 when the molar ratio of Cu²⁺ to monomer was exactly 1:1. That means there is no excess ligating atom in the ion‐imprinted polymer and therefore, the nonspecific adsorption could be avoided. Benefiting from the excellent selectivity of Cu²⁺‐imprinted polymer, even if the concentration of Zn²⁺ was 25 times that of Cu²⁺, Cu²⁺‐imprinted polymer still affords a high selectivity coefficient. Finally, the optimal synthesis conditions for Cu²⁺‐imprinted polymer, except the pH, were adopted to prepare Ni²⁺‐imprinted polymer, and Ni²⁺‐imprinted polymer also offered satisfying selectivity to Ni²⁺. That implies this multidentate monomer is adaptable in ion imprinting and, the optimal synthesis conditions of Cu²⁺‐imprinted polymer except pH are likely suitable for the imprinting of other ions besides Cu²⁺.