Surface-imprinted core–shell Au nanoparticles for selective detection of bisphenol A based on surface-enhanced Raman scattering

Surface-imprinted core–shell Au nanoparticles (AuNPs) were explored for the highly selective detection of bisphenol A (BPA) by surface-enhanced Raman scattering (SERS). A triethoxysilane-template complex (BPA-Si) was synthesized and then utilized to fabricate a molecularly imprinted polymer (MIP) layer on the AuNPs via a sol–gel process. The imprinted BPA molecules were removed by a simple thermal treatment to generated the imprint-removed material, MIP-ir-AuNPs, with the desired recognition sites that could selectively rebind the BPA molecules. The morphological and polymeric characteristics of MIP-ir-AuNPs were investigated by transmission electron microscopy and Fourier-transform infrared spectroscopy. The results demonstrated that the MIP-ir-AuNPs were fabricated with a 2 nm MIP shell layer within which abundant amine groups were generated. The rebinding kinetics study showed that the MIP-ir-AuNPs could reach the equilibrium adsorption for BPA within 10 min owning to the advantage of ultrathin core–shell nanostructure. Moreover, a linear relationship between SERS intensity and the concentration of BPA on the MIP-ir-AuNPs was observed in the range of 0.5–22.8 mg L⁻¹, with a detection limit of 0.12 mg L⁻¹ (blank ± 3 × s.d.). When applied to SERS detection, the developed surface-imprinted core–shell MIP-ir-AuNPs could recognize BPA and prevent interference from the structural analogues such as hexafluorobisphenol A (BPAF) and diethylstilbestrol (DES). These results revealed that the proposed method displayed significant potential utility in rapid and selective detection of BPA in real samples.     

Pushing the surface-enhanced Raman scattering analyses sensitivity by magnetic concentration: A simple non core–shell approach

A simple and accessible method for molecular analyses down to the picomolar range was realized using self-assembled hybrid superparamagnetic nanostructured materials, instead of complicated SERS substrates such as core–shell, surface nanostructured, or matrix embedded gold nanoparticles. Good signal-to-noise ratio has been achieved in a reproducible way even at concentrations down to 5 × 10⁻¹¹ M using methylene blue (MB) and phenanthroline (phen) as model species, exploiting the plasmonic properties of conventional citrate protected gold nanoparticles and alkylamine functionalized magnetite nanoparticles. The hot spots were generated by salt induced aggregation of gold nanoparticles (AuNP) in the presence of those analytes. Then, the aggregates of AuNP/analyte were decorated with small magnetite nanoparticles by electrostatic self-assembly forming MagSERS hybrid nanostructured materials. SERS peaks were enhanced up to 100 times after magnetic concentration in a circular spot using a magnet in comparison with the respective dispersion of the nanostructured material.     

Mn3O4–Au nanozymes as peroxidase mimic and the surface-enhanced Raman scattering nanosensor for the detection of hydrogen peroxide

The artificial enzyme-mimicking system using nanomaterials has attracted significant research interest in chemical and biological sensing for industrial and environmental applications. Mn₃O₄ nanostructure serves as an effective catalyst in oxidation and reduction reactions that mimic natural peroxidase enzymes. In this study, we synthesized Mn₃O₄–Au spindle nanocomposites (Mn₃O₄–Au SNCs) stabilized by L-cysteine using a simple hydrothermal reduction. The enzyme-mimicking peroxidase activity of these Mn₃O₄–Au SNCs with hydrogen peroxide (H₂O₂) was investigated in the presence of a chromogenic substrate, 3,3′,5,5′-tetramethylbenzidine that catalyzed reduction of H₂O₂ in water and milk giving rise to a blue color inferring the nanozyme activity of Mn₃O₄–Au SNCs. The exceptional enzyme-like catalytic activity of Mn₃O₄–Au SNC probes later proved to be excellent surface-enhanced Raman scattering (SERS) sensor nanoprobes for sensitive H₂O₂ detection over a wide concentration range from 0.005 to 10 μM. The developed Mn₃O₄–Au SERS sensor exhibited a lower detection limit (LoD) of 2 nM in water and 0.6 μM in spiked milk indicating sensitivity for H₂O₂ detection with excellent selectivity, reproducibility, and long-term stability. The developed Mn₃O₄–Au nanoprobes demonstrated unique combination of properties with visual and SERS methods for sensitively detecting H₂O₂ in food, overcoming limitations of existing H₂O₂ sensors. The developed SERS method using nanozymes potentially be extended to detecting a variety of other redox chemicals or explosives in industries, environments, and biomedical fields.     

Using a photochemical method and chitosan to prepare surface-enhanced Raman scattering–active silver nanoparticles

In this paper, we report a new strategy for the preparation of surface-enhanced Raman scattering (SERS)-active silver nanoparticles (Ag NPs), using a photochemical method and the presence of chitosan (Ch). First, Ag substrates were subjected to electrochemical oxidation/reduction cycles (ORCs) in deoxygenated aqueous solutions containing 0.1 M HNO₃ and 1 g L⁻¹ Ch (pH 6.9, adjusted by adding 1 M NaOH), resulting in Ag⁺–Ch complexes. These substrates were then irradiated with UV light at various wavelengths to yield the SERS-active Ag NPs. A stronger SERS effect was observed on the SERS-active Ag NPs prepared by using UV irradiation at 310 nm. The pH of the solution and the presence of Ch during the preparation process both affected the resulting SERS activities.     

Iron oxide/tantalum oxide core–shell magnetic nanoparticle-based microwave-assisted extraction for phosphopeptide enrichment from complex samples for MALDI MS analysis

A new type of metal-oxide-coated magnetic nanoparticles (NPs)—tantalum-oxide-coated magnetic iron oxide (Fe₃O₄@Ta₂O₅) NPs—which are used as affinity probes for selectively trapping phosphopeptides from complex samples, is demonstrated in this study. In this approach, phosphopeptide enrichment was achieved by incubating the NPs with sample solutions under microwave heating within 1 min. The NP–target species conjugates were readily isolated from samples by magnetic separation followed by matrix-assisted laser desorption/ionization (MALDI) mass spectrometric analysis. When using human serum as the sample, phosphorylated fibrinopeptide-A-derived ions are the only ions observed in the MALDI mass spectra after enrichment by the Fe₃O₄@Ta₂O₅ NPs. Furthermore, only phosphopeptides appear in the MALDI mass spectra after using the affinity probes to selectively trap target species from the tryptic digest of a cell lysate and milk sample. The results demonstrated that the Fe₃O₄@Ta₂O₅ NPs have the capability of selectively trapping phosphorylated peptides from complex samples. The detection limit of this approach for a phosphopeptide (FQpSEEQQQTEDELQDK) was ~10 fmol. Figure For the first time, tantalum oxide-coated magnetic iron oxide (Fe₃O₄@Ta₂O₅) NPs were demonstrated as suitable affinity-probes for selectively trapping phosphopeptides from complex samples. To shorten the analysis time, phosphopeptide enrichment was achieved by incubating the NPs with sample solutions under microwave-heating within 1 min. MALDI MS was employed for characterization of the species trapped by the NPs.     

Ag@C core–shell structure composites-decorated Ag nanoparticles: zero current potentiometry for detection of hydrogen peroxide

Ag@C core–shell structure composites were successfully synthesized by hydrothermal method, and then Ag nanoparticles were decorated on the surface of Ag@C by reduction of AgNO₃. The morphology, composition and structure of the Ag@C@Ag composites were characterized by scanning electron microscopy (SEM), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD). Cyclic voltammetry and amperometry were used to evaluate the electrocatalytic performance of the Ag@C@Ag/GCE for detection of H₂O₂. Meanwhile, a new electrochemical method of zero current potentiometry was used for electrochemical detection of H₂O₂. The linear range and the detection limit were from 0.2 to 10, and 0.07 μM, respectively.     

A ratiometric electrochemical biosensor for sensitive detection of Hg based on thymine–Hg–thymine structure

In this paper, a simple, selective and reusable electrochemical biosensor for the sensitive detection of mercury ions (Hg²⁺) has been developed based on thymine (T)-rich stem–loop (hairpin) DNA probe and a dual-signaling electrochemical ratiometric strategy. The assay strategy includes both “signal-on” and “signal-off” elements. The thiolated methylene blue (MB)-modified T-rich hairpin DNA capture probe (MB-P) firstly self-assembled on the gold electrode surface via Au–S bond. In the presence of Hg²⁺, the ferrocene (Fc)-labeled T-rich DNA probe (Fc-P) hybridized with MB-P via the Hg²⁺-mediated coordination of T–Hg²⁺–T base pairs. As a result, the hairpin MB-P was opened, the MB tags were away from the gold electrode surface and the Fc tags closed to the gold electrode surface. These conformation changes led to the decrease of the oxidation peak current of MB (I_MB), accompanied with the increase of that of Fc (I_Fc). The logarithmic value of I_Fc/I_MB is linear with the logarithm of Hg²⁺ concentration in the range from 0.5 nM to 5000 nM, and the detection limit of 0.08 nM is much lower than 10 nM (the US Environmental Protection Agency (EPA) limit of Hg²⁺ in drinking water). What is more, the developed DNA-based electrochemical biosensor could be regenerated by adding cysteine and Mg²⁺. This strategy provides a simple and rapid approach for the detection of Hg²⁺, and has promising application in the detection of Hg²⁺ in real environmental samples.     

Development of a tyrosinase-based biosensor for bisphenol A detection using gold leaf–like microstructures

Journal of Solid State Electrochemistry - A simple one-step electrodeposition without template allowed the synthesis of gold microstructures on a screen-printed carbon electrode. Chloroauric ions...     

Toehold-mediated DNA displacement-based surface-enhanced Raman scattering DNA sensor utilizing an Au–Ag bimetallic nanodendrite substrate

A simple and sensitive surface enhanced Raman scattering (SERS)-based DNA sensor that utilizes the toehold-mediated DNA displacement reaction as a target-capturing scheme has been demonstrated. For a SERS substrate, Au–Ag bimetallic nanodendrites were electrochemically synthesized and used as a sensor platform. The incorporation of both Ag and Au was employed to simultaneously secure high sensitivity and stability of the substrate. An optimal composition of Ag and Au that satisfied these needs was determined. A double-strand composed of ‘a probe DNA (pDNA)’ complementary to ‘a target DNA (tDNA)’ and ‘an indicator DNA tagged with a Raman reporter (iDNA)’ was conjugated on the substrate. The conjugation made the reporter molecule close to the surface and induced generation of the Raman signal. The tDNA released the pre-hybridized iDNA from the pDNA via toehold-mediated displacement, and the displacement of the iDNA resulted in the decrease of Raman intensity. The variation of percent intensity change was sensitive and linear in the concentration range from 200 fM to 20 nM, and the achieved limit of detection (LOD) was 96.3 fM, superior to those reported in previous studies that adopted different signal taggings based on such as fluorescence and electrochemistry.     

A colorimetric assay for measuring iodide using Au@Ag core–shell nanoparticles coupled with Cu

Au@Ag core–shell nanoparticles (NPs) were synthesized and coupled with copper ion (Cu²⁺) for the colorimetric sensing of iodide ion (I⁻). This assay relies on the fact that the absorption spectra and the color of metallic core–shell NPs are sensitive to their chemical ingredient and dimensional core-to-shell ratio. When I⁻ was added to the Au@Ag core–shell NPs-Cu²⁺ system/solution, Cu²⁺ can oxidize I⁻ into iodine (I₂), which can further oxidize silver shells to form silver iodide (AgI). The generated Au@AgI core–shell NPs led to color changes from yellow to purple, which was utilized for the colorimetric sensing of I⁻. The assay only took 10 min with a lowest detectable concentration of 0.5 μM, and it exhibited excellent selectivity for I⁻ over other common anions tested. Furthermore, Au@Ag core–shell NPs-Cu²⁺ was embedded into agarose gels as inexpensive and portable “test strips”, which were successfully used for the semi-quantitation of I⁻ in dried kelps.     

Fenugreek hydrogel–agarose composite entrapped gold nanoparticles for acetylcholinesterase based biosensor for carbamates detection

A biosensor was fabricated to detect pesticides in food samples. Acetylcholinesterase was immobilized in a novel fenugreek hydrogel–agarose matrix with gold nanoparticles. Transparent thin films with superior mechanical strength and stability were obtained with 2% fenugreek hydrogel and 2% agarose. Immobilization of acetylcholinesterase on the membrane resulted in high enzyme retention efficiency (92%) and a significantly prolonged shelf life of the enzyme (half-life, 55 days). Transmission electron microscopy revealed that, gold nanoparticles (10–20 nm in diameter) were uniformly dispersed in the fenugreek hydrogel–agarose–acetylcholinesterase membrane. This immobilized enzyme-gold nanoparticle dip-strip system detected various carbamates, including carbofuran, oxamyl, methomyl, and carbaryl, with limits of detection of 2, 21, 113, and 236 nM (S/N = 3), respectively. Furthermore, the fabricated biosensor exhibited good testing capabilities when used to detect carbamates added to various fruit and vegetable samples.     

Designing high performance Pt monolayer core–shell electrocatalysts for fuel cells

In proton exchange membrane fuel cells, platinum (Pt) has been the dominant choice for both the cathode and the anode catalysts. The high Pt content and high associated costs particularly at the cathode, and sluggish oxygen reduction reaction (ORR) kinetics and poor stability, remain a challenge. Pt monolayer (ML) catalysts offer a distinctively reduced Pt content while providing considerable possibilities for enhancing their catalytic activity and stability for the ORR. In this opinion, we first review the achievement in active and stable Pt ML on palladium (Pd) nanoparticle catalysts for the ORR. We then describe the mechanisms that rationalize their high activity and durability. Recently, we developed several novel nanostructured cores to further improve the ORR activity and stability by optimizing their surface orientation, composition, and morphology. The results from the Pt ML catalysts significantly impact the research of electrocatalysis and fuel-cell technology, as they demonstrate an exceptionally effective way of design and syntheses of catalysts.     

α-MoO3 nanowire-based amperometric biosensor for l-lactate detection

Large-scale orthorhombic single-crystalline molybdenum trioxide nanowires were synthesized using a facile one-pot hydrothermal method. Lactate oxidase enzyme was immobilized on the nanowires to produce a highly sensitive electrochemical biosensor for l-lactate detection. At an applied potential of 0.5 V, the sensor exhibited a high sensitivity of 0.87 μA/mM with a fast response to l-lactate (90% of response times within 10 s). A linear response was obtained over a concentration range from 0.5 to 8 mM with a detection limit of 0.15 mM (S/N?=?3). The developed biosensor showed excellent reproducibility and operational stability, as well as the ability to be stored long term.     

A Ti3C2TX/Pt–Pd based amperometric biosensor for sensitive cancer biomarker detection

The detection of cancer biomarkers is of great significance for the early screening of cancer. Detecting the content of sarcosine in blood or urine has been considered to provide a basis for the diagnosis of prostate cancer. However, it still lacks simple, high-precision and wide-ranging sarcosine detection methods. In this work, a Ti₃C₂T_X/Pt–Pd nanocomposite with high stability and excellent electrochemical performance has been synthesized by a facile one-step alcohol reduction and then used on a glassy carbon electrode (GCE) with sarcosine oxidase (SO_x) to form a sarcosine biosensor (GCE/Ti₃C₂T_X/Pt–Pd/SO_x). The prominent electrocatalytic activity and biocompatibility of Ti₃C₂T_X/Pt–Pd enable the SO_x to be highly active and sensitive to sarcosine. Under the optimized conditions, the prepared biosensor has a wide linear detection range to sarcosine from 1 to 1000 µM with a low limit of detection of 0.16 µM (S/N = 3) and a sensitivity of 84.1 µA/mM cm². Besides, the reliable response in serum samples shows its potential in the early diagnosis of prostate cancer. More importantly, the successful construction and application of the amperometric biosensor based on Ti₃C₂T_X/Pt–Pd will provide a meaningful reference for detecting other cancer biomarkers.     

Simultaneous determination of polysorbate 20 and unbound polyethylene-glycol in protein solutions using new core–shell reversed phase column and condensation nucleation light scattering detection

A novel fast and sensitive method has been developed for the specific simultaneous determination of polysorbate 20 (Tween 20) and unbound polyethylene-glycol (PEG) from liquid formulations in the presence of proteins and excipients. The quantitative determination is based on a fast liquid chromatographic (HPLC) separation and condensation nucleation light scattering detection (CNLSD or NQAD™). The method uses a Kinetex core–shell column (100 mm × 3 mm, 2.6 μm) and methanol–water–trifluoroacetic acid mobile phase. The rapid HPLC-CNLSD method presented here is suitable for quantifying polysorbate 20 in the range of 10–60 μg/ml and unbound PEG in the range of 2–40 μg/ml in protein solutions within good manufacturing practices (GMP) of the pharmaceutical industry.     

Electrochemical preparation and characterization of magnetic core–shell nanowires for biomedical applications

Magnetic CoNi@Au core–shell nanorods have been electrochemically synthesized, characterized and functionalized to test their inherent cytotoxicity in order to assess their potential use for biomedical applications. The initially electrodeposited CoNi nanorods have been covered with a gold layer by means of galvanic displacement to minimize the nanowires toxicity and their aggregation, and favour the functionalization. The presence of a gold layer on the nanorod surface slightly modifies the magnetic behaviour of the as-deposited nanorods, maintaining their soft-magnetic behaviour and high magnetization of saturation. The complete covering of the nanorods with the gold shell favours a good functionalization with a layer of (11-Mercaptoundecyl)hexa(ethylene glycol) molecules, in order to create a hydrophilic coating to avoid the aggregation of nanorods, keeping them in suspension and give them stability in biological media. The presence of the organic layer incorporated was detected by means of electrochemical probe experiments. A cytotoxicity test of functionalized core–shell nanorods, carried out with adherent HeLa cells, showed that cell viability was higher than 80% for amounts of nanorods up to 10 μg mL^− 1. These results make functionalized nanorods promising vehicles for targeted drug delivery in medicine, which gives a complementary property to the magnetic nanoparticles.     

Synthesis of bifunctional core–shell particles with a porous zeolite core and a responsive polymeric shell

The aim of our work is the synthesis and characterization of colloidal core–shell particles with a zeolite core and an environmentally responsive shell. We have synthesized colloidal ZSM-5 zeolite and modified the surface with 3-(trimethoxysilyl)propyl methacrylate in order to introduce double bonds at the surface. The cross-linked polymeric shell was prepared by precipitation polymerization using the functionalized zeolite particles as seeds. We employed thermoresponsive poly(N-isopropylacrylamide) and pH-responsive poly(vinylpyridine) as the polymeric shell, respectively. The temperature- and pH-depending swelling and deswelling of the core–shell particles were characterized with dynamic light scattering techniques. Transmission electron microscopy pictures show the morphology of the synthesized particles. It is proposed that these types of bifunctional core–shell particles could be of use for controlled uptake and release applications and separation of molecules.