Determination by MALDI-TOF MS of the structures obtained from polytransesterification of diethyl 2,6-pyridinedicarboxylate and poly(ethylene glycol)

Polyesters from reaction of diethyl 2,6-pyridinedicarboxylate with poly(ethylene glycol) 1000 were synthesized through a polytransesterification process using titanium(IV) alkoxide as catalyst. The resulting polyesters were characterized by size-exclusion chromatography (SEC) and matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). The structures of the polyesters were established and revealed the formation of several cyclic and linear populations of varying size. Detailed analysis of the MALDI-TOF mass spectra of the obtained polyesters has revealed the presence of linear polycondensates bearing various end groups among which those attributed to an exchange reaction between alkyl groups of the catalyst and ester groups of the polycondensates.     

Determination of self-exchange rate of alkanethiolates in self-assembled monolayers on gold using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In this paper, we describe a new method for determining the exchange rates of alkanethiolates in self-assembled monolayers (SAMs) on gold using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) to analyze the compositions of the alkanethiolate in SAMs rapidly and directly. In particular, to investigate the self-exchange of alkanethiols, we prepared a deuterated alkanethiol that has the same molecular properties as the non-deuterated alkanethiol but a different molecular weight. SAMs consisting of deuterated alkanethiolates were immersed in a solution of the non-deuterated alkanethiol, and the influences of the immersion time, temperature, concentration, and solvent on the self-exchange rates were investigated. Furthermore, we assessed the exchange rates among alkanethiols with different carbon chain lengths and different size of ethylene glycol units. In addition, we performed molecular dynamics simulations using a model SAM system in order to understand the molecular mechanism of the exchange process.     

Matrix-assisted and polymer-assisted laser desorption/ionization time-of-flight mass spectrometric analysis of low molecular weight polystyrenes and polyethylene glycols

Recently, matrices based on oligomers of dioxin and thiophene (polymer-assisted laser desorption/ionization (PALDI)) have been described for mass spectrometric (MS) analysis of low molecular weight compounds (Woldegiorgis A, von Kieseritzky F, Dahlstedt E, Hellberg J, Brinck T, Roeraade J. Rapid Commun. Mass Spectrom. 2004; 18: 841-852). In this paper, we report the use of PALDI matrices for low molecular weight polymers. An evaluation with polystyrene and polyethylene glycol showed that no charge transfer ionization occurs. Ionization is mediated through metal ion adduction. Comparison of matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) data for two very low molecular weight polymers with data obtained from size-exclusion chromatography (SEC) revealed a systematic difference regarding mean molecular weight and dispersity. Further, the mass spectra obtained with PALDI matrices had a higher signal-to-noise ratio than the spectra obtained with conventional matrices. For polymers with higher molecular weights (>1500 Da), the conventional matrices gave better performance. For evaluation of the MALDI spectra, three non-linear mathematical models were evaluated to model the cumulative distributions of the different oligomers and their maximal values of Mw, Mn and PDI. Models based on sigmoidal or Boltzmann equations proved to be most suitable. Objective modeling tools are necessary to compare different sample and instrumental conditions during method optimization of MALDI analysis of polymers, since the bias between MALDI and SEC data can be misleading.     

Discrimination of Thermoplastic Polyesters by MALDI-TOF MS and Py-GC/MS

The aim of this work is to discriminate thermoplastic polyester-polyethylene terephthalate (PET), polybutylene terephthalate (PBT), and polytrimethylene terephthalate (PTT), which cannot be easily identified by many methods. Both matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS) were applied to identify these polyesters owing to their analytical ability to determining polymers' chemical structure. The three thermoplastic polyesters can be easily distinguished by MALDI-TOF MS according to their different repeated units. Py-GC/MS was used to analyze their specific pyrolyzates. The three polyesters can be identified through their characteristic pyrolysis products as well.     

Data processing method for the determination of accurate molecular weight distribution of polymers by SEC/MALDI-MS.

A novel data processing method for a hyphenated technique, size exclusion chromatography/matrix-assisted laser desorption/ionization-mass spectrometry (SEC/MALDI-MS), has been proposed to determine accurate molecular weight distributions on the basis of the individual oligomer species of a polymer. This method is based on the concept that the individual peak intensities of MALDI mass spectrum observed for every SEC fraction with narrow molecular weight distribution could be adjusted to the quantified values to reveal the accurate molecular weight distribution using the signal intensity of the corresponding fraction on the SEC chromatogram observed with a refractive index detector. At first, the theory of the proposed date processing is described in detail. Then, experimental verification of the method is described. This was performed through the characterization of mixtures of three kinds of monodispersed polystyrene reference materials (weight average molecular weight = ca. 6000, 10000, and 18000) as model samples. An accurate trimodal molecular weight distribution for the individual oligomer species of the sample was obtained without any influence of the chromatographic band broadening observed in the original SEC chromatogram. Moreover, the method for depicting the elution profiles of individual oligomer species during SEC separation was also obtained as a "mass chromatogram" using the data processing procedure.     

Characterization of implant device materials using size-exclusion chromatography with mass spectrometry and with triple detection

A more complete understanding of the raw materials used for making implant device materials becomes increasingly important in the medical device industry. Often such detailed information requires utilization of a combination of analytical techniques. In this work, we characterize a poly(dimethyl siloxane) (PDMS) material using on-line size exclusion chromatography (SEC) with electrospray ionization (ESI) and matrix assisted laser desorption ionization (MALDI) mass spectrometry (MS) techniques. Here, we obtain detailed molecular compositional information such as repeat units, end group chemistry, and identification of impurities in both the high and low mass range. SEC with light scattering, viscosity, and refractive index detection (triple detection) is used to obtain information on a small quantity of high mass impurity that was undetected by both SEC-ESI and MALDI MS techniques. SEC with triple detection measures absolute molecular weights and molecular weight distributions. We compare average molecular weight values of the implantable device polymer obtained by SEC with triple detection, SEC-ESI, and SEC-MALDI MS techniques.     

Hyperbranched polyesters: synthesis, characterization, and molecular simulations

New types of hyperbranched polyesters were synthesized by the reaction of 2,2-bis(hydroxymethyl) propionic acid as an AB2-type monomer with pentaerythritol, trimethylol propane, or glycerol as the core moiety. The obtained globular networks were characterized by NMR and MALDI-TOF spectroscopic techniques. Molecular weights determined by MALDI-TOF were confirmed by gel permeation chromatography. Fourier transform infrared (FTIR) spectroscopy was used for the quantitative evaluation of hydrogen bonding as well as to study the structure-property relationship. To investigate the changes and types of intermolecular H-bonding interactions in hyperbranched polyesters with a variation in molecular structure, the deconvolution of FTIR spectra was carried out using Origin 6.0 software through the Gaussian curve-fitting method. Molecular simulations were performed through molecular mechanics and molecular dynamics (MD) calculations using the DISCOVER module. Cohesive energy density, solubility parameters, and surface properties of the hyperbranched polyesters were calculated. Further, vibrational analysis was computed using MD simulations for all the hyperbranched polyesters developed in this work.     

Papain Purification Insights: Monitoring by Electrophoretic Approaches and MALDI-TOF Peptide Mass Fingerprint Analyses

Papain was purified from dried Carica papaya latex by fractioned salt precipitation in presence of sodium tetrathionate to preserve enzymatic activity. Purification was followed by different electrophoretic methods. Identification of the purified product was afforded by submitting the peptides obtained by tryptic digestion of papain to matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF/TOF MS) analysis. Comparison of the peptide masses analyzed by peptide mass fingerprinting (PMF) MALDI-TOF and those obtained by theoretical tryptic digestion, revealed the presence of some peptides belonging the other three endopeptidases contained in papaya latex (very similar to papain in molecular weight and pI) in the purified fraction of papain. The PMF by MALDI-TOF could be applied as a method to follow papain purification.     

Application of ketenes to well‐defined polyester synthesis. II. Synthesis of reactive polyester by living anionic polymerization of (4‐halophenyl)ethylketene

Novel ketenes, (4‐chlorophenyl)ethylketene and (4‐bromophenyl)ethylketene, were synthesized by dehydrochlorination of 2‐(4‐halophenyl)butanoyl chlorides, and their anionic polymerizations by lithium (4‐methoxyphenoxide) in tetrahydrofuran at ?20 °C were carried out to afford the corresponding polyesters with narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.3) quantitatively. Polymerizations with various feed ratios afforded the corresponding polyesters with predictable molecular weights and narrow molecular weight distributions. Kinetic studies of the polymerizations at ?78 °C revealed that the polymerization rates were apparently larger than that of ethylphenylketene, which is considered to be responsible for the enhanced electrophilicities of the monomers via the introduction of electron‐negative halogen atoms. Monomer conversion agreed with the first‐order kinetic equation. These results strongly support the living mechanism of this polymerization. The obtained polyesters were modified by a palladium‐catalyzed coupling reaction of the side‐chain 4‐halophenyl group with 4‐methoxyphenylboronic acid, demonstrating their potential as reactive polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2093–2102, 2001     

Size exclusion chromatography/mass spectrometry applied to the analysis of polysaccharides.

A novel method for analysing polysaccharide materials is described which employs size-exclusion chromatography (SEC) followed by detection by on-line electrospray ionisation mass spectrometry (ESI-MS) and off-line matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOFMS). It is demonstrated through SEC/ESI ion trap mass spectrometry that the formation of multiply charged oligomer ions, which bind up to five sodium cations, allows the rapid analysis of polysaccharide ions with molecular weights in excess of 9 kDa. MALDI spectra generated from fractionation of the effluent collected from the same SEC separation are shown to be in good agreement with the ESI spectra with respect to molecular weight distributions and types of ions generated. ESI and MALDI mass spectra of samples obtained from sequential graded ethanol precipitation and SEC fractionation of acid and enzymatically digested arabinoxylan polysaccharides show important structural differences between polysaccharide fragments. In addition, a comparison is made between the mass spectra of native and permethylated SEC-separated fragments of acid and enzymatically treated arabinogalactan. Linkage information of the permethylated arabinogalactan oligomers can be rapidly established through the use of on-line SEC/ESI-MS( n) experiments.     

Ring-expansion polycondensation of 2-stanna-1,3-dioxepane (or 1,3-dioxepene) with dicarboxylic acid chlorides

2,2-Dibutyl-2-stanna-1,3-dioxepane 1 (or 1,3-dioxepene 2) were prepared from 1,4-butane (or 1,4-butene) diol and dibutyltin dimethoxide. They were polycondensed at 80°C in n-heptane with adipoyl-, suberoyl, sabacoyl chloride and with decane-1,10-dicarbonyl chloride. In the case of suberoyl chloride and 2,2-dibutyl-2-stanna-1,3-dioxepane reaction time, temperature and stoichiometry were varied to optimize both the molecular weight and the fraction of cyclic polyesters. With a slight excess of the dicarboxylic acid chlorides, only macrocyclic polyesters were obtained in all cases. The resulting cyclic polyesters were characterized by viscosity measurements, by ¹H and ¹³C NMR and by MALDI-TOF mass spectrometry.     

超支化聚(β-环糊精)的合成与表征

通过硅氢加成反应, 以ABx型功能化β-环糊精大单体为原料, 采用一步法合成出新型超支化聚(β-环糊精)高分子. ABx大单体由单取代对甲苯磺酰化β-CD依次与烯丙基胺、1,1,3,3-四甲基二硅氧烷(含氢双封头)及丙烯酰氯反应得到. 采用1H NMR, 13C NMR, 29Si NMR和飞行时间质谱对ABx大单体及其聚合物的结构进行了表征. 利用凝胶渗透色谱/多角度激光光散射(SEC/MALLS)联用仪得到了超支化聚(β-环糊精)的分子量、分子量分布及本体黏度.     

STRUCTURAL CHARACTERIZATION OF POLY(ϵ-CAPROLACTONE) AND POLY(ϵ-CAPROLACTONE-b-ISOBUTYLENE-b-ϵ-CAPROLACTONE) BLOCK COPOLYMERS BY MALDI-TOF MASS SPECTROMETRY

Poly(?-caprolactone)(PC1) and PC1-polyisobutylene-PC1 (PC1-PIB-PC1) block copolymers were synthesized in anhydrous toluene by in situ conversion of 2-methyl-1-propanol (2M1P) and α,ω-dihydroxy PIB, respectively, to the corresponding aluminum alkoxide by reaction with a stoichiometric amount of triethylaluminum (TEA) followed by the addition of e-caprolactone. Structural characterization of 2M1P-initiated PCl by gel permeation chromatography (GPC) and matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) mass spectrometry (MS) demonstrated the presence of cyclic oligomers, which are produced by intramolecular transesterification reactions that become significant at high monomer conversions. A minor fraction of chains bearing carboxylic acid termini was also observed in the MALDI-TOF mass spectrum; however, carboxylic acid chain ends could not be detected by ¹³C NMR analysis. Thus, the likely origin of the carboxylic acid termini is fragmentation of the initiator residue from the chain end during MALDI-TOF analysis. For PCl-PIB-PCl block copolymers, two different α,ω-telechelic PIB diols were used as macroinitiators, one derived from allyl and one from isopropenyl terminated PIB. Terminal olefins were converted to primary alcohols via regioselective hydroboration followed by alkaline hydrogen peroxide oxidation. After reaction with ?-caprolactone, formation of a block copolymer was evidenced by a shift of the polymer peak to lower elution volume in GPC analysis. Block copolymers possessed molecular weight distributions ≤1.4, and molecular weights of the PCl blocks calculated from GPC were in excellent agreement with those found using MALDI-TOF MS. Structural analysis indicated that the PCl end blocks were severed from the crude block copolymer during MS analysis, for both allyl- and isopropenyl-derived materials. For allyl-derived materials the PCl blocks were found to predominantly carry a C₂ residue at the point of detachment of the PIB block; however, the isopropenyl-derived block copolymers showed a complex mixture of different residues suggesting a complex fragmentation mechanism during loss of the PIB block.     

MALDI-TOF MS analysis of native and permethylated or benzimidazole-derivatized polysaccharides

MALDI-TOF MS provides rapid and sensitive analyses of larger biomolecules. However, MS analyses of polysaccharide have been reported to have lower sensitivity compared to peptides and proteins. Here, we investigated some polysaccharides chemically derivatized by permethylation and ortho-phenylene diamine (OPD) tagging. Methylated glycan is obviously able to improve the sensitivity for mass spectrometry detection. Oxidative condensation by UV-activation tagging to saccharides by OPD and peptide-OPD also improve the sensitivity of MALDI-TOF MS analyses. Polysaccharides including dextran, glucomannan, arabinoxylan, arabinogalactan and beta-1,3-glucan, isolated from nutritional supplements of Ganoderma lucidum and Saccharomyces pastorianus were measured using MALDI-TOF MS with 2,5-dihydroxybenzoic acid (2,5-DHB) as the matrix. These glycans were also derivatized to methylated and benzimidazole-tagged glycans by chemical transformation for molecular weight analysis. The derivatized polysaccharides showed excellent MALDI-TOF MS signal enhancement in the molecular weight range from 1 to 5 kDa. Here, we demonstrate an efficient method to give glycan-benzimidazole (glycan-BIM) derivatives for polysaccharide determination in MALDI-TOF MS. Therefore, permethylated or benzimidazole-derivatized polysaccharides provide a new option for polysaccharide analysis using MALDI-TOF MS.     

Evaluation of the quantitativeness of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using an equimolar mixture of uniform poly(ethylene glycol) oligomers

Quantitativeness of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was elucidated using an equimolar mixture of uniform poly(ethylene glycol) (PEG) oligomers with no molecular weight distributions. Uniform PEG oligomers with degrees of polymerization n = 6-40 were separated from commercial PEG samples by preparative super-critical fluid chromatography. MALDI-TOF mass spectra of an equimolar mixture of the uniform PEG oligomers were recorded by adding a mixture of 2,5-dihydroxybenzoic acid as a matrix reagent and four chlorinated salts, i.e. LiCl, NaCl, KCl and RbCl. Remarkable non-quantitative effects were observed in the MALDI-TOF mass spectra in both the lower and higher molecular mass regions. At higher molecular masses greater than about 10(3), PEG oligomers with larger molecular mass yielded lower spectral intensities irrespective of the species of adduct cations and higher laser powers induced larger decreases in mass spectral intensities with the increase in their molecular masses. On the other hand, in the lower molecular mass region, less than about 10(3), the observed non-quantitative effect greatly depends on the species of adduct cations, indicating that the stability of the PEG-cation complex affects the MALDI-TOF mass spectral intensities of uniform PEG oligomers.     

利用MALDI-TOF质谱技术研究MPEG-b-PCL两嵌段共聚物的嵌段长度及嵌段分布

利用基质辅助激光解吸电离飞行时间质谱(MALDI-TOF MS)结合源后分解(PSD)技术对甲氧基封端的聚乙二醇-b-聚己内酯(MPEG-b-PCL)两嵌段共聚物进行了结构分析. 根据得到的MALDI-TOF MS谱图和PSD碎片信息清晰地确定了嵌段共聚物的嵌段长度和嵌段分布. 结果表明, 采用MALDI-TOF MS结合PSD技术研究这类嵌段共聚物链结构非常有效. 这为更好地认识和应用这类嵌段共聚物提供了重要的依据, 同时也建立了分析这类嵌段共聚物的方法.     

基质辅助激光解吸电离飞行时间质谱技术分析三七和海兔神经连索内的皂甙组分

基质辅助激光解吸电离飞行时间(MALDI-TOF)质谱技术能高效解吸三七提取液(Panaxnotoginseng Extraction, PNE)中的混合皂甙分子为皂甙离子,并供质量分析器检测与分析.选用MALDI-TOF 质谱技术直接分析色谱纯皂甙样品的纯度,其检测灵敏度优于反相高效液相色谱法(RP-HPLC).优化提取中药三七(Panax notoginseng, PN)的混合皂甙, 选用MALDI-TOF质谱技术直接分析PNE中的皂甙种类和相对含量,发现PNE至少含有20种不同分子结构的皂甙组分,其中人参皂甙(Ginsenoside) Rg1和三七皂甙(Notoginsenoside)R1含量相对较高.选用薄板层析法(TLC)制备PNE中的R1皂甙.MALDI-TOF质谱技术研究蓝斑背肛海兔(Notarcus leachiicirrosus Stimpson, NLCS)神经连索内的超微量R1的组成与分布.建立PNE皂甙的指纹图谱,并适合于评价中药三七的品质和分析体内超微量皂甙的代谢过程与机理.     

含有28个氨基酸的复杂多肽的串级质谱全序列分析研究

利用MALDI-TOF/TOF MS和ESI-MS/MS对一种含有多达28个氨基酸的复杂合成多肽成功进行了全序列测定. 通过调节激光强度、碰撞诱导解离(CID)能量等质谱参数以及依据不同序列分析软件, 获得了涵盖所有b型和y型碎片离子的串级质谱图. 结果显示这种方法可以有效地解决de novo测序方法遇到的谱峰过于复杂导致运算死机等问题. 通过讨论如何对含有超过20个氨基酸片断的多肽进行合格串级质谱实验, 为蛋白质组学肽段序列测定提供了新的方法和思路.     

Block length determination of the block copolymer mPEG‐b‐PS using MALDI‐TOF MS/MS

The molar mass determination of block copolymers, in particular amphiphilic block copolymers, has been challenging with chromatographic techniques. Therefore, methoxy poly(ethylene glycol)‐b‐poly(styrene) (mPEG‐b‐PS) was synthesized by atom transfer radical polymerization (ATRP) and characterized in detail not only by conventional chromatographic techniques, such as size exclusion chromatography (SEC), but also by matrix‐assisted laser/desorption ionization tandem mass spectrometry (MALDI‐TOF MS/MS). As expected, different molar mass values were obtained in the SEC measurements depending on the calibration standards (either PEG or PS). In contrast, MALDI‐TOF MS/MS analysis allowed the molar mass determination of each block, by the scission of the weakest point between the PEG and PS block. Thus, fragments of the individual blocks could be obtained. The PEG block showed a depolymerization reaction, while for the PS block fragments were obtained in the monomeric, dimeric, and trimeric regions as a result of multiple chain scissions. The block length of PEG and PS could be calculated from the fragments recorded in the MALDI‐TOF MS/MS spectrum. Furthermore, the assignment of the substructures of the individual blocks acquired by MALDI‐TOF MS/MS was accomplished with the help of the fragments that were obtained from the corresponding homopolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Separation and Identification of Oligomeric-Hindered Amine Light Stabilizer Uvasorb HA 88 by High-performance Liquid Chromatography (HPLC) Coupled With Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (MALSI-TOF-MS)

Abstract

Uvasorb HA 88 is widely used as a light stabilizer to prevent plastic polymer degradation. Its high molecular weight and oligomeric characters provide challenge for quality control. In this study, high-performance liquid chromatography (HPLC) coupled with electrospray ionization time of flight mass spectrometry (ESI-TOF MS) was applied for separation and detection of Uvasorb HA 88. The synthesis scheme was deduced and confirmed by the characterization of Uvasorb HA 88 products from different batches. Direct matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) was employed for the detailed characterization of chemical composition of Uvasorb HA 88. Furthermore, a reliable reversed-phase high-performance liquid chromatography (RP-HPLC) coupled with MALDI-TOF MS method was established and the weight-average and number-average molecular masses were calculated. The results revealed that six oligomers with repeat unit numbers from 1 to 4 were present in Uvasorb HA 88. A molecular weight of up to 6808?g mol^?1 was detected and two new series of oligomers were reported for the first time. Different series of oligomers and positional isomers were observed in Uvasorb HA 88. This work provides a suitable method to evaluate the technical grade of Uvasorb HA 88 as well as comprehensive characterization of complex oligomeric hindered amine light stabilizers.