A high sensitive assay platform based on surface-enhanced Raman scattering for quantification of protease activity

In this study, a new, sensitive, and rapid assay was developed to quantitatively measure the proteolytic enzyme activity using the surface-enhanced Raman scattering (SERS) probe. Two different shapes of gold nanoparticles, gold nanosphere and nanorod particles were produced. SERS label, comprising self-assembled monolayers (SAMs) of Raman reporter molecule (5,5-Dithiobis (2-Nitrobenzoic acid), DTNB), was coated on the surface of the nanoparticles. Two different SERS-based analysis platforms were designed using gold-coated glass slide and polystyrene microtiter plate. The calibration curves were obtained by plotting the intensity of the SERS signal of symmetric NO₂ stretching of DTNB at 1326 cm⁻¹vs. the protease concentration. The effects of nanoparticle geometry and assay platform on the protease assay were investigated and the best working combination of the parameters was selected as rod shaped SERS probe and gold-coated glass slide. The correlation between the protease activity and SERS signal was found to be linear within the range of 0.1-2 mU/mL (R² = 0.979). The limit of detection (LOD) and limit of quantification (LOQ) values of the validated method were found as 0.43 and 1.30 mU/mL, respectively. The intra-day and inter-day precisions of the method, as relative standard deviation (RSD), were determined as 2.5% and 3.6%, respectively. The developed method was successfully applied for quantitative analysis of the commercial enzyme preparate that is used in cheese making process. It was also used for investigation of substrate specificity of protease enzyme towards the casein and bovine serum albumin. The proposed method has a flexibility to try different substrates for the detection of various enzyme activities.     

Fe2O3@Au core/shell nanoparticle-based electrochemical DNA biosensor for Escherichia coli detection

A Fe₂O₃@Au core/shell nanoparticle-based electrochemical DNA biosensor was developed for the amperometric detection of Escherichia coli (E. coli). Magnetic Fe₂O₃@Au nanoparticles were prepared by reducing HAuCl₄ on the surfaces of Fe₂O₃ nanoparticles. This DNA biosensor is based on a sandwich detection strategy, which involves capture probe immobilized on magnetic nanoparticles (MNPs), target and reporter probe labeled with horseradish peroxidase (HRP). Once magnetic field was added, these sandwich complexes were magnetically separated and HRP confined at the surfaces of MNPs could catalyze the enzyme substrate and generate electrochemical signals. The biosensor could detect the concentrations upper than 0.01 pM DNA target and upper than 500 cfu/mL of E. coli without any nucleic acid amplification steps. The detection limit could be lowered to 5 cfu/mL of E. coli after 4.0 h of incubation.     

A surface-enhanced Raman scattering method for detection of trace glutathione on the basis of immobilized silver nanoparticles and crystal violet probe

Unsatisfactory sensitivity and stability for molecules with low polarizability is still a problem limiting the practical applications of surface-enhanced Raman scattering (SERS) technique. By preparing immobilized silver nanoparticles (Fe₃O₄/Ag) through depositing silver on the surface of magnetite particles, a highly sensitive and selective SERS method for the detection of trace glutathione (GSH) was proposed on the basis of a system of Fe₃O₄/Ag nanoparticles and crystal violet (CV), in which the target GSH competed with the CV probe for the adsorption on the Fe₃O₄/Ag nanoparticles. Raman insensitive GSH replaced the highly Raman sensitive CV adsorbed on the surface of Fe₃O₄/Ag particles. This replacement led to a strong decrease of the CV SERS signal, which was used to determine the concentration of GSH. Under optimal conditions, a linear response was established between the intensity decrease of the CV SERS signal and the GSH concentration in the range of 50–700 nmol L⁻¹ with a detection limit of 40 nmol L⁻¹. The use of a Fe₃O₄/Ag substrate provided not only a great SERS enhancement but also a good stability, which guarantees the reproducibility of the proposed method. Its use for the determination of GSH in practical blood samples and cell extract yielded satisfactory results.     

Fluorescent detection of protein kinase based on zirconium ions-immobilized magnetic nanoparticles

We report here an affinity separation-based fluorometric method for monitoring the activity and inhibition of protein kinase. In this assay, when the fluorescein isothiocyanate (FITC) labeled substrate peptides (S-peptide) are phosphorylated by kinase, the product peptides (P-peptide) will be adsorbed and concentrated onto the surface of Zr⁴⁺-immobilized nitrilotriacetic acid-coated magnetic nanoparticles (Zr-NTA MNPs) through the chelation of Zr⁴⁺ and phosphate groups. After magnetic separation, the fluorescence intensity of the homogeneous solution changes dramatically. Hence the fluorescence response allows this MNPs-based method to easily probe kinase activity by a spectrometer. The feasibility of the method has been demonstrated by sensitive measurement of the activity of cAMP-dependent protein kinase (PKA) with a low detection limit (0.5 mU μL⁻¹). Moreover, the system is successfully applied to estimate the IC₅₀ value of PKA inhibitor H-89 and detect the Forskolin/3-isobutyl-1-methylxanthine (IBMX) stimulated activation of PKA in cell lysate. Additionally, Zr-NTA MNPs are reusable by stripping Zr⁴⁺ ions from NTA-coated MNPs and rechelating again. This method, which relies on the surface-functionalized MNPs, presents a promising candidate for simple and cost-effective assay of kinase activity and inhibitor screening.     

Silver overlayer-modified surface-enhanced Raman scattering-active gold substrates for potential applications in trace detection of biochemical species

Because Ag and Au nanoparticles (NPs) possess well-defined localized surface plasmon resonance (LSPR) they are popularly employed in the studies of surface-enhanced Raman scattering (SERS). As shown in the literature and in our previous studies, the advantage of SERS-active Ag NPs is their higher SERS enhancement over Au NPs. On the other hand, the disadvantage of SERS-active Ag NPs compared to Au NPs is their serious decay of SERS enhancement in ambient laboratory air. In this work, we develop a new strategy for preparing highly SERS-active Ag NPs deposited on a roughened Au substrate. This strategy is derived from the modification of electrochemical underpotential deposition (UPD) of metals. The coverage of Ag NPs on the roughened Au substrate can be as high as 0.95. Experimental results indicate that the SERS of Rhodamine 6G (R6G) observed on this developed substrate exhibits a higher intensity by ca. 50-fold of magnitude, as compared with that of R6G observed on the substrate without the deposition of Ag NPs. The limit of detection (LOD) for R6G measured on this substrate is markedly reduced to 2 × 10⁻¹⁵ M. Moreover, aging of SERS effect observed on this developed substrate is significantly depressed, as compared with that observed on a generally prepared SERS-active Ag substrate. These aging tests were performed in an atmosphere of 50% relative humidity (RH) and 20% (v/v) O₂ at 30 °C for 60 day. Also, the developed SERS-active substrate enables it practically applicable in the trace detection of monosodium urate (MSU)-containing solution in gouty arthritis without a further purification process.     

Fabrication of bimetallic microfluidic surface-enhanced Raman scattering sensors on paper by screen printing

Au–Ag bimetallic microfluidic, dumbbell-shaped, surface enhanced Raman scattering (SERS) sensors were fabricated on cellulose paper by screen printing. These printed sensors rely on a sample droplet injection zone, and a SERS detection zone at either end of the dumbbell motif, fabricated by printing silver nanoparticles (Ag NPs) and gold nanoparticles (Au NPs) successively with microscale precision. The microfluidic channel was patterned using an insulating ink to connect these two zones and form a hydrophobic circuit. Owing to capillary action of paper in the millimeter-sized channels, the sensor could enable self-filtering of fluids to remove suspended particles within wastewater without pumping. This sensor also allows sensitive SERS detection, due to advantageous combination of the strong surface enhancement of Ag NPs and excellent chemical stability of Au NPs. The SERS performance of the sensors was investigated by employing the probe rhodamine 6G, a limit of detection (LOD) of 1.1 × 10⁻¹³ M and an enhancement factor of 8.6 × 10⁶ could be achieved. Moreover, the dumbbell-shaped bimetallic sensors exhibited good stability with SERS performance being maintained over 14 weeks in air, and high reproducibility with less than 15% variation in spot-to-spot SERS intensity. Using these dumbbell-shaped bimetallic sensors, substituted aromatic pollutants in wastewater samples could be quantitatively analyzed, which demonstrated their excellent capability for rapid trace pollutant detection in wastewater samples in the field without pre-separation.     

A gold@silica core–shell nanoparticle-based surface-enhanced Raman scattering biosensor for label-free glucose detection

The gold nanostar@silica core–shell nanoparticles conjugated with glucose oxidase (GOx) enzyme molecules have been developed as the surface-enhanced Raman scattering (SERS) biosensor for label-free detection of glucose. The surface-immobilized GOx enzyme catalyzes the oxidation of glucose, producing hydrogen peroxide. Under laser excitation, the produced H₂O₂ molecules near the Au nanostar@silica nanoparticles generate a strong SERS signal, which is used to measure the glucose concentration. The SERS signal of nanostar@silica∼GOx nanoparticle-based sensing assay shows the dynamic response to the glucose concentration range from 25 μM to 25 mM in the aqueous solution with the limit of detection of 16 μM. The sensing assay does not show any interference when glucose co-exists with both ascorbic acid and uric acid. The sensor can be applied to a saliva sample.     

Preparation and characterization novel polymer-coated magnetic nanoparticles as carriers for doxorubicin

The poly(lactide-co-glycolide)-coated magnetic nanoparticles (PLGA MNPs) were prepared as carriers of doxorubicin (PLGA-DOX MNPs) through water-in-oil-in-water (W/O/W) emulsification method. The characteristics of PLGA-DOX MNPs were measured by using transmission electron microscopy (TEM) and vibrating-sampling magnetometry (VSM). It was found that the synthesized nanoparticles were spherical in shape with an average size of 100 ± 20 nm, low aggregation and good magnetic responsivity. Meanwhile, the drug content and encapsulation efficiency of nanoparticles can be achieved by varying the feed weight ratios of PLGA and DOX particles. These PLGA-DOX MNPs also demonstrated sustained release of DOX at 37 °C in buffer solution. Besides, influence of drug-loaded nanoparticles on in vitro cytotoxicity was determined by MTT assay, while cellular apoptosis was detected by Annexin V-FITC apoptosis detection kit. The results showed that PLGA-DOX MNPs retained significant antitumor activities. Therefore, PLGA-DOX MNPs might be considered a promising drug delivery system for cancer chemotherapy.     

An approach for the surface functionalized gold nanoparticles with pH-responsive polymer by combination of RAFT and click chemistry

In this report, we demonstrated a novel efficient post-modification route for preparation of smart hybrid gold nanoparticles with poly(4-vinylpyridine) (P4VP) based on RAFT and click chemistry. A new azide terminated ligand was first synthesized to modify gold nanoparticles by ligand exchange reaction, and then click reaction was used to graft alkyne terminated P4VP which was prepared by RAFT onto the surface of gold nanoparticles. The functionalized hybrid gold nanoparticles were characterized by TEM, FTIR, and XPS etc. The results indicated that the P4VP was successfully grafted onto the surface of gold nanoparticles by click reaction. The surface grafting density was calculated to be about 6 chains/nm²_. In addition, the hybrid gold nanoparticles showed a pH responsive phenomenon as the pH value changed around 5.     

A rapid and highly sensitive portable chemiluminescent immunosensor of carcinoembryonic antigen based on immunomagnetic separation in human serum

To detect a biomarker for lung cancer, carcinoembryonic antigen (CEA), a highly sensitive, selective, rapid and portable immunosensor based on immunomagnetic separation and chemiluminescence immunoassay was introduced. A sandwich scheme assay has been utilized with horseradish peroxidase (HRP) labeled anti-CEA antibody and immunomagnetic beads (IMBs). The presence of target protein CEA caused the formation of the sandwich structures (IMBs-CEA-HRP labeled antibody). IMBs were applied to capture CEA and immobilize CEA through the external magnetic field. The HRP at the surface of the antibody catalytically oxidized the luminescence substrate to generate optical signals which were detected by a portable home-made luminometer and which were directly proportional to the concentration of CEA in the samples. The signals were dependent on CEA concentrations in a linear range from 0 to 50 ng mL⁻¹. The limit of detection (LOD) of this method was as low as 5.0 pg mL⁻¹ (S/N = 3). The novel immunosensor was highly sensitive with an assay time of <35 min. The intra- and inter-assay coefficients of variation were <10%. The anti-CEA antibody can be bound to the bead efficiently with a conjugation rate of 73%. IMBs could be stored in 4 °C protecting from light for 2 months without obvious reduction of biological activity. Human reference sera mixed with various concentrations of CEA were tested with the proposed method and commercial enzyme-linked immunosorbent assay (ELISA) kit, and a good linear relationship was obtained. This proposed technique demonstrated an excellent performance for quantifying CEA and was expected to be used for clinical testing.     

A novel optical thrombin aptasensor based on magnetic nanoparticles and split DNAzyme

In this paper, we report a novel and sensitive optical sensing protocol for thrombin detection based on magnetic nanoparticles (MNPs) and thrombin aptamer, employing split HRP-mimicking DNAzyme halves as its sensing element, which can catalyze the H₂O₂-mediated oxidation of the colorless ABTS into a blue-green product. A single nucleotide containing the recognition element and sensing element is utilized in our protocol. The specific recognition of thrombin and its aptamer leads to the structure deformation of the DNA strands and causes the split of the DNAzyme halves. Therefore, the decrease of absorption spectra can be recorded by the UV–visible Spectrophotometer. DNA-coated MNPs are utilized to separate the interferential materials from the analyst, thus making this assay can be applied in the detection of thrombin in complex samples, such as human plasma. This original, sensitive and cost-effective assay showed favorable recognition for thrombin. The absorbance signals with the concentration of thrombin over a range from 0.5 to 20 nM and the detection limit of thrombin was 0.5 nM. The controlled experiments showed that thrombin signal was not interfered in the presence of other co-existence proteins.     

Dual-color upconversion fluorescence and aptamer-functionalized magnetic nanoparticles-based bioassay for the simultaneous detection of Salmonella Typhimurium and Staphylococcus aureus

A sensitive luminescent bioassay for the simultaneous detection of Salmonella Typhimurium and Staphylococcus aureus was developed using aptamer-conjugated magnetic nanoparticles (MNPs) for both recognition and concentration elements and using upconversion nanoparticles (UCNPs) as highly sensitive dual-color labels. The bioassay system was fabricated by immobilizing aptamer 1 and aptamer 2 onto the surface of MNPs, which were employed to capture and concentrate S. Typhimurium and S. aureus. NaY_0.78F₄:Yb_0.2,Tm_0.02 UCNPs modified aptamer 1 and NaY_0.28F₄:Yb_0.70,Er_0.02 UCNPs modified aptamer 2 further were bond onto the captured bacteria surface to form sandwich-type complexes. Under optimal conditions, the correlation between the concentration of S. Typhimurium and the luminescent signal was found to be linear within the range of 10¹–10⁵ cfu mL⁻¹ (R² = 0.9964), and the signal was in the range of 10¹–10⁵ cfu mL⁻¹ (R² = 0.9936) for S. aureus. The limits of detection of the developed method were found to be 5 and 8 cfu mL⁻¹ for S. Typhimurium and S. aureus, respectively. The ability of the bioassay to detect S. Typhimurium and S. aureus in real water samples was also investigated, and the results were compared to the experimental results from the plate-counting methods. Improved by the magnetic separation and concentration effect of MNPs, the high sensitivity of UCNPs, and the different emission lines of Yb/Er- and Yb/Tm-doped NaYF₄ UCNPs excited by a 980 nm laser, the present method performs with both high sensitivity and selectivity for the two different types of bacteria.     

β−cyclodextrins-based inclusion complexes of CoFe2O4 magnetic nanoparticles as catalyst for the luminol chemiluminescence system and their applications in hydrogen peroxide detection

β−cyclodextrins (β−CD)-based inclusion complexes of CoFe₂O₄ magnetic nanoparticles (MNPs) were prepared and used as catalysts for chemiluminescence (CL) system using the luminol-hydrogen peroxide CL reaction as a model. The as-prepared inclusion complexes were characterized by XRD (X-ray diffraction), TGA (thermal gravimetric analysis) and FT-IR. The oxidation reaction between luminol and hydrogen peroxide in basic media initiated CL. The effect of β−CD-based inclusion complexes of CoFe₂O₄ magnetic nanoparticles and naked CoFe₂O₄ magnetic nanoparticles on the luminol-hydrogen peroxide CL system was investigated. It was found that inclusion complexes between β−CD and CoFe₂O₄ magnetic nanoparticles could greatly enhance the CL of the luminol-hydrogen peroxide system. Investigation on the kinetic curves and the chemiluminescence spectra of the luminol-hydrogen peroxide system demonstrates that addition of CoFe₂O₄ MNPs or inclusion complexes between β−CD and CoFe₂O₄ MNPs does not produce a new luminophor of the chemiluminescent reaction. The luminophor for the CL system was still the excited-state 3-aminophthalate anions (3-APA*). The enhanced CL signals were thus ascribed to the possible catalysis from CoFe₂O₄ MNPs or inclusion complexes between β−CD and CoFe₂O₄ nanoparticles. The feasibility of employing the proposed system for hydrogen peroxide sensing was also investigated. Experimental results showed that the CL emission intensity was linear with hydrogen peroxide concentration in the range of 1.0 × 10⁻⁷ to 4.0 × 10⁻⁶ mol L⁻¹ with a detection limit of 2.0 × 10⁻⁸ mol L⁻¹ under optimized conditions. The proposed method has been used to determine hydrogen peroxide in water samples successfully.     

Separation and detection of multiple pathogens in a food matrix by magnetic SERS nanoprobes

A rapid and sensitive method was developed here for separation and detection of multiple pathogens in food matrix by magnetic surface-enhanced Raman scattering (SERS) nanoprobes. Silica-coated magnetic probes (MNPs@SiO₂) of ∼100 nm in diameter were first prepared via the reverse microemulsion method using cetyltrimethylammonium bromide as a surfactant and tetraethyl orthosilicate as the silica precursor. The as-prepared MNPs@SiO₂ were functionalized with specific pathogen antibodies to first capture threat agents directly from a food matrix followed by detection using an optical approach enabled by SERS. In this scheme, pathogens were first immuno-magnetically captured with MNPs@SiO₂, and pathogen-specific SERS probes (gold nanoparticles integrated with a Raman reporter) were functionalized with corresponding antibodies to allow the formation of a sandwich assay to complete the sensor module for the detection of multiple pathogens in selected food matrices, just changing the kinds of Raman reporters on SERS probes. Here, up to two key pathogens, Salmonella enterica serovar Typhimurium and Staphylococcus aureus, were selected as a model to illustrate the probability of this scheme for multiple pathogens detection. The lowest cell concentration detected in spinach solution was 10³ CFU/mL. A blind test conducted in peanut butter validated the limit of detection as 10³ CFU/mL with high specificity, demonstrating the potential of this approach in complex matrices.     

Toehold-mediated DNA displacement-based surface-enhanced Raman scattering DNA sensor utilizing an Au–Ag bimetallic nanodendrite substrate

A simple and sensitive surface enhanced Raman scattering (SERS)-based DNA sensor that utilizes the toehold-mediated DNA displacement reaction as a target-capturing scheme has been demonstrated. For a SERS substrate, Au–Ag bimetallic nanodendrites were electrochemically synthesized and used as a sensor platform. The incorporation of both Ag and Au was employed to simultaneously secure high sensitivity and stability of the substrate. An optimal composition of Ag and Au that satisfied these needs was determined. A double-strand composed of ‘a probe DNA (pDNA)’ complementary to ‘a target DNA (tDNA)’ and ‘an indicator DNA tagged with a Raman reporter (iDNA)’ was conjugated on the substrate. The conjugation made the reporter molecule close to the surface and induced generation of the Raman signal. The tDNA released the pre-hybridized iDNA from the pDNA via toehold-mediated displacement, and the displacement of the iDNA resulted in the decrease of Raman intensity. The variation of percent intensity change was sensitive and linear in the concentration range from 200 fM to 20 nM, and the achieved limit of detection (LOD) was 96.3 fM, superior to those reported in previous studies that adopted different signal taggings based on such as fluorescence and electrochemistry.     

An electrochemical immunosensor for carcinoembryonic antigen enhanced by self-assembled nanogold coatings on magnetic particles

A quick and reproducible electrochemical-based immunosensor technique, using magnetic core/shell particles that are coated with self-assembled multilayer of nanogold, has been developed. Magnetic particles that are structured from Au/Fe₃O₄ core-shells were prepared and aminated after a reaction between gold and thiourea, and additional multilayered coatings of gold nanoparticles were assembled on the surface of the core/shell particles. The carcinoembryonic antibody (anti-CEA) was immobilized on the modified magnetic particles, which were then attached on the surface of solid paraffin carbon paste electrode (SPCE) by an external magnetic field. This is an assembly of a novel immuno biosensor for carcinoembryonic antigen (CEA). The sensitivity and response features of this immunoassay are significantly affected by the surface area and the biological compatibility of the multilayered nanogold. The linear range for the detection of CEA was from 0.005 to 50 ng mL⁻¹ and the limit of detection (LOD) was 0.001 ng mL⁻¹. The LOD is approximately 500 times more sensitive than that of the traditional enzyme-linked immunosorbent assay for CEA detection.     

Pseudo-homogeneous immunoextraction of epitestosterone from human urine samples based on gold-coated magnetic nanoparticles

A pseudo-homogeneous immunoextraction method based on gold-coated magnetic nanoparticles (MNPs) for the specific extraction and quantitative analysis of epitestosterone (17α-hydroxy-4-androsten-3-one, abbreviated as “ET”) from human urine samples by high-performance liquid chromatography (HPLC) has been developed. Half-IgG of anti-ET monoclonal antibodies were covalently immobilized onto (Fe₃O₄)_core-Au_shell (Fe₃O₄@Au) MNPs. An external magnetic field was applied to collect the MNPs which were then rinsed with distilled water followed by elution with absolute methanol to obtain ET as the analyte. The obtained extraction solution was analyzed by HPLC with UV detection (244 nm) within 12 min. The standard calibration curve for ET showed good linearity in the range of 20-200 ng mL⁻¹ in phosphate-buffered saline (PBS) solutions with acceptable accuracy and precision. Limit of detection for ET was 0.06 ng mL⁻¹ due to an enrichment factor of 100-fold was achieved. The results obtained by the present method for spiked human urine samples were in agreement with those from indirect competitive enzyme-linked immunoadsorbent assays (ELISAs). The antibody-conjugated Fe₃O₄@Au MNPs are novel materials for immunoaffinity extraction. Compared with the conventional technique using immunoaffinity column, the method described here for sample pretreatment was fast, highly specific, and easy to operate.     

Ultrasensitive determination of DNA sequences by flow injection chemiluminescence using silver ions as labels

We presented a new strategy for ultrasensitive detection of DNA sequences based on the novel detection probe which was labeled with Ag⁺ using metallothionein (MT) as a bridge. The assay relied on a sandwich-type DNA hybridization in which the DNA targets were first hybridized to the captured oligonucleotide probes immobilized on Fe₃O₄@Au composite magnetic nanoparticles (MNPs), and then the Ag⁺-modified detection probes were used to monitor the presence of the specific DNA targets. After being anchored on the hybrids, Ag⁺ was released down through acidic treatment and sensitively determined by a coupling flow injection–chemiluminescent reaction system (Ag⁺–Mn²⁺–K₂S₂O₈–H₃PO₄–luminol) (FI–CL). The experiment results showed that the CL intensities increased linearly with the concentrations of DNA targets in the range from 10 to 500 pmol L⁻¹ with a detection limit of 3.3 pmol L⁻¹. The high sensitivity in this work may be ascribed to the high molar ratio of Ag⁺–MT, the sensitive determination of Ag⁺ by the coupling FI–CL reaction system and the perfect magnetic separation based on Fe₃O₄@Au composite MNPs. Moreover, the proposed strategy exhibited excellent selectivity against the mismatched DNA sequences and could be applied to real samples analysis.     

Pushing the surface-enhanced Raman scattering analyses sensitivity by magnetic concentration: A simple non core–shell approach

A simple and accessible method for molecular analyses down to the picomolar range was realized using self-assembled hybrid superparamagnetic nanostructured materials, instead of complicated SERS substrates such as core–shell, surface nanostructured, or matrix embedded gold nanoparticles. Good signal-to-noise ratio has been achieved in a reproducible way even at concentrations down to 5 × 10⁻¹¹ M using methylene blue (MB) and phenanthroline (phen) as model species, exploiting the plasmonic properties of conventional citrate protected gold nanoparticles and alkylamine functionalized magnetite nanoparticles. The hot spots were generated by salt induced aggregation of gold nanoparticles (AuNP) in the presence of those analytes. Then, the aggregates of AuNP/analyte were decorated with small magnetite nanoparticles by electrostatic self-assembly forming MagSERS hybrid nanostructured materials. SERS peaks were enhanced up to 100 times after magnetic concentration in a circular spot using a magnet in comparison with the respective dispersion of the nanostructured material.     

Bare gold nanoparticles mediated surface-enhanced Raman spectroscopic determination and quantification of carboxylated single-walled carbon nanotubes

The paper proposes a simple and portable approach for the surface enhanced Raman scattering (SERS) spectroscopy in situ determination of carboxylated single walled carbon nanotubes (SWNTs) in river water samples. The method is based on the subsequent microfiltration of a bare gold nanoparticles solution and the water sample containing soluble carbon nanotubes by using a home-made filtration device with a small filtration diameter. An acetate cellulose membrane with a pore size of 0.2 μm first traps gold nanoparticles to form the SERS-active substrate and then concentrates the carbon nanotubes. The measured SERS intensity data were closely fit with a Langmuir isotherm. A portable Raman spectrometer was employed to measure SERS spectra, which enables in situ determination of SWNTs in river waters. The limit of detection was 10 μg L⁻¹. The precision, for a 10 mg L⁻¹ concentration of carbon nanotubes, is 1.19% intra-membrane and 10.5% inter-membrane.