Poly(amino acid)-based thermoresponsive molecularly imprinted magnetic nanoparticles for specific recognition and release of lysozyme

In this study, poly(amino acid)-based thermoresponsive molecularly imprinted magnetic nanoparticles for recognition and release of lysozyme was prepared via surface imprinting method. For constructing the molecularly imprinted polymer (MIP) layer, amino acid-based thermoresponsive monomer (N-methacryloyl-l-alanine methyl ester, MA-L-Ala-OMe) was mainly selected for the functional monomer along with N,N′-methylenebis(acrylamide) as the crosslinker. The resultant magnetic MIP nanoparticles were characterized in detail. Meanwhile, the dynamic light scattering studies and swelling ratios measurements were carried out for demonstrating the thermoresponsive property of the imprinted nanoparticles. The prepared magnetic MIP nanoparticles showed good adsorption capacity and selective recognition properties to lysozyme. Moreover, the fast adsorption process could reach equilibrium within 15 min. Importantly, the capture and release of lysozyme could be easily realized simply by altering the temperature of aqueous solution. Furthermore, the prepared imprinted nanoparticles were applied to separate lysozyme from the real egg white samples. The results proved that the thermoresponsive MIPs based on MA-L-Ala-OMe have great potential for selectively enriching target proteins in real samples.     

A disposable electrochemical sensor for the determination of indole-3-acetic acid based on poly(safranine T)-reduced graphene oxide nanocomposite

A disposable electrochemical sensor for the determination of indole-3-acetic acid (IAA) based on nanocomposites of reduced graphene oxide (rGO) and poly(safranine T) (PST) was reported. The sensor was prepared by coating a rGO film on a pre-anodized graphite electrode (AGE) through dipping-drying and electrodepositing a uniform PST layer on the rGO film. Scanning electron microscopic (SEM) and infrared spectroscopic (IR) characterizations indicated that PST-rGO formed a rough and crumpled composite film on AGE, which exhibited high sensitive response for the oxidation of IAA with 147-fold enhancement of the current signal compared with bare AGE. The voltammetric current has a good linear relationship with IAA concentration in the range 1.0 × 10⁻⁷-7.0 × 10⁻⁶ M, with a low detection limit of 5.0 × 10⁻⁸ M. This sensor has been applied to the determination of IAA in the extract samples of several plant leaves and the recoveries varied in the range of 97.71-103.43%.     

Sensitive and selective determination of gallic acid in green tea samples based on an electrochemical platform of poly(melamine) film

In this work, an electrochemical sensor coupled with an effective flow-injection amperometry (FIA) system is developed, targeting the determination of gallic acid (GA) in a mild neutral condition, in contrast to the existing electrochemical methods. The sensor is based on a thin electroactive poly(melamine) film immobilized on a pre-anodized screen-printed carbon electrode (SPCE*/PME). The characteristics of the sensing surface are well-characterized by field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and surface water contact angle experiments. The proposed assay exhibits a wide linear response to GA in both pH 3 and pH 7.0 phosphate buffer solutions (PBS) under the optimized flow-injection amperometry. The detection limit (S/N = 3) is 0.076 μM and 0.21 μM in the pH 3 and pH 7 solutions, respectively. A relative standard deviation (RSD) of 3.9% is obtained for 57 successive measurements of 50 μM GA in pH 7 solutions. Interference studies indicate that some inorganic salts, catechol, caffeine and ascorbic acid do not interfere with the GA assay. The interference effects from some orthodiphenolic compounds are also investigated. The proposed method and a conventional Folin–Ciocalteu method are applied to detect GA in green tea samples using the standard addition method, and satisfactory spiked recoveries are obtained.     

基于聚(2-甲基-2-噁唑啉)和聚丙烯酸的混合刷在毛细管电泳在线富集溶菌酶中的应用

制备了一种对溶菌酶具有可控吸附性能的混合刷涂层毛细管,用于毛细管电泳在线富集溶菌酶以提高其检测灵敏度。首先,分别通过阳离子开环聚合和可逆加成-断裂链转移（RAFT）聚合合成聚（2-甲基-2-噁唑啉）（PMOXA）和聚丙烯酸（PAA）,然后将甲基丙烯酸缩水甘油酯（GMA）分别与PMOXA和PAA通过自由基共聚和RAFT聚合合成出聚（2-甲基-2-噁唑啉）-r-甲基丙烯酸缩水甘油酯（PMOXA-r-GMA）和聚丙烯酸-b-聚甲基丙烯酸缩水甘油酯（PAA-b-PGMA）。将PMOXA-r-GMA和PAA-b-PGMA的混合溶液以一定比例加入到毛细管内,通过加热即可制备出基于PMOXA和PAA的混合刷涂层毛细管。X射线光电子能谱（XPS）对毛细管原材料的表面组成研究结果表明,当混合溶液质量浓度为20 g/L、PMOXA-r-GMA和PAA-b-PGMA质量比为1：1时,所得涂层中羧基的含量随着PAA链长的增加而增加;异硫氰酸荧光素标记溶菌酶（FITC-溶菌酶）吸附实验结果显示,通过改变环境的pH和离子强度（I）可以调控涂层毛细管对溶菌酶的吸附和释放,在pH 7（I=10^-5mol/L）条件下,毛细管可以吸附大量的溶菌酶,当条件变为pH 3（I=10^-1mol/L）时,吸附的溶菌酶可以被释放出来。将这种具有溶菌酶可控吸附性能的涂层毛细管用于毛细管电泳在线富集溶菌酶,当PAA链长是PMOXA链长的2.2倍时,溶菌酶的灵敏度增强因子为17.69,检出限为8.7×10^-5g/L;同一天内对溶菌酶连续测定5次以及连续测定5天,峰面积的日内、日间相对标准偏差（RSD）分别为2.9%和4.1%,迁移时间的日内、日间RSD分别为0.9%和2.1%。涂层的制备只需一步,简单易行,而且涂层具有很好的稳定性。本研究为毛细管电泳分析痕量蛋白质提供了一种简单有效的方法。     

氧化石墨烯-邻苯二甲酸二(2-乙基己)酯表面分子印迹吸附剂的合成及应用

合成了以纳米材料氧化石墨烯为载体的表面分子印迹固相萃取材料，建立了分子印迹萃取联用高效液相色谱法检测牛奶塑料包装袋中的塑化剂邻苯二甲酸二（2-乙基己）酯（DEHP）残留的方法。以氧化石墨烯为基质、DEHP为模板分子、甲基丙烯酸为功能单体、N，N-二甲基甲酰胺为溶剂，通过沉淀聚合法合成表面分子印迹材料，优化了合成条件并对产品进行红外光谱、透射电镜表征。对产品的吸附性能（包括选择性、吸附平衡时间、吸附容量、重复使用率等）进行测定。在最优萃取条件下对牛奶包装袋提取液中DEHP进行选择性富集，通过高效液相色谱-紫外法检测，线性范围为0.5~50 mg/L，检出限为0.03 mg/L，定量限为0.1 mg/L。3种加标浓度下回收率为81.6%~92.4%，相对标准偏差（RSDs）小于7%。结果表明，该方法能够应用于实际样品中DEHP分析。     

Hydrogen bonded layer-by-layer assembly of poly(2-vinylpyridine) and poly(acrylic acid): Influence of molecular weight on the formation of microporous film by post-base treatment

This article describes the buildup of hydrogen bonded multilayer film of poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA), and the influence of polymer molecular weight on the formation of microporous film by post-base treatment. The formation of a microporous film involved a two-step mechanism: the release of PAA from P2VP/PAA multilayer, and the reorganization of the remaining P2VP on the substrate. Fourier transform infrared spectroscopy (FT-IR) indicated that the release of PAA from hydrogen bonded multilayer was a rapid process, which was almost independent of the molecular weight of PAA. Furthermore, the molecular weight of P2VP had a great effect on micropore formation by immersing the P2VP/PAA multilayer in basic solution. The rate of micropore formation increased with increasing molecular weight. We anticipate that a comparative study on P2VP/PAA films containing high or low molecular weight polymer provides a way to control the surface morphology, and will be helpful and constructive for the forthcoming discussion about the formation of the microporous film.     

Thermosensitive behavior of amphiphilic triblock copolymers based on poly(acrylic acid) and poly(propylene oxide)

Self‐association in aqueous solution of amphiphilic poly(acrylic acid)‐b‐poly(propylene oxide)‐b‐poly(acrylic acid) (PAA‐b‐PPO‐b‐PAA) copolymers having various outer PAA block lengths are presented. These copolymers show two thermosensitive behaviors. The first one, due to hydrogen bonds between PAA and PPO resulting in large aggregates, was observed by visible spectroscopy. The second one, due to the association of PPO middle block into aggregates, was evidenced by dynamic light scattering and pyrene fluorescence. These critical temperatures both depend on the ionization and the length of PAA blocks. The characterization of the aggregates above the critical aggregation concentration by fluorescence quenching experiments showed a very low aggregation number corresponding to dimers or trimers association depending on the conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1507–1514     

Design, synthesis and characterization of novel biodegradable macrodiols based on poly（DL-lactic acid） and poly（p-dioxanone）

Integrating poly(lactic acid)(PLA),glycolic acid(GA) and ethylene glycol(EG) will hopefully result in a novel copolymer that combines such advantages as fastened and controllable release rate and improved flexibility together with good biocompatibility.In this study,p-dioxanone(PDO) was employed to copolymerize with DL-lactide(LA) via ring-opening melt polymerization using Sn(Oct)_2 as an initiator and ethylene glycol as a co-initiator.The obtained degradable macrodiols(HO-P(LA-co-PDO)-OH) were just such...     

Synthesis and anticancer property of one Fe(II) compound based on 5-(3-pyridyl)tetrazole-2-acetic acid

Abstract

Tetrazole-carboxylate ligands are universally considered as multi-functional candidates for the construction of coordination architectures. A 1-D [Fe(pytza)₂(H₂O)₂]_n·2nH₂O (pytza = 5-(3-pyridyl)tetrazole-acetato) has been prepared. In vitro study on Hela cells show that Hpytza is naturally nontoxic while [Fe(pytza)₂(H₂O)₂]_n·2nH₂O shows high toxicity with a half-maximal inhibitory concentration (IC₅₀) of 6.3?×?10^?5 M. In addition, the compound can effectively inhibit the migration of Hela cells.     

巯基乙酸修饰金电极电化学发光行为的研究及其对盐酸硫必利的测定

在裸金电极上制备了巯基乙酸自组装膜修饰电极(MA/SAMs-Au/CME)。基于盐酸硫必利对联吡啶钌在该电极上的电化学及其发光行为的强烈增敏作用,建立起一种直接测定盐酸硫必利电致化学发光新方法。在最佳实验条件下,盐酸硫必利在1.0×10-4～1.0×10-7mol/L与相对发光强度呈线性关系,其线性回归方程I(强度)=27.169×106c+140.26,r2=0.9959,检出限(S/N=3)为5.11×10-9mol/L。连续测定1.0×10-5mol/L盐酸硫必利10次,发光强度的RSD值为1.8%。对样品进行回收率试验,回收率在94.1%～104.9%之间,RSD为4.5%(n=5)。     

Mussel‐inspired decoration of Ni(OH)2 nanosheets on 2D MoS2 towards enhancing thermal and flame retardancy properties of poly(lactic acid)

In the present work, a facile and environmental method was developed to fabricate the novel functionalized MoS₂ hybrid. Firstly, MoS₂ nanosheets were coated with polydopamine (PDA) through the self‐polymerization of dopamine (MoS₂‐PDA) in a buffer solution. Then the decoration of Ni(OH)₂ on the MoS₂‐PDA was synthesized because of the strong affinity of Ni²⁺ with hydroxyl groups in PDA. Finally, the as‐synthesized MoS₂‐PDA@Ni(OH)₂ was introduced into poly(lactic acid) (PLA) matrix to explore flame retardancy, thermal stability, and crystalline property of the composites. As confirmed by X‐ray diffraction (XRD), Fourier‐transform infrared spectrometer (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA), the MoS₂ nanosheets were dually modified with PDA and Ni(OH)₂ without destroying the original structures. The thermal degradation of PLA with MoS₂‐PDA@Ni(OH)₂ generated a notably higher yield of char. Moreover, the crystallization rate of composites is higher than neat PLA. The cone calorimeter test revealed that the introduction of 3% MoS₂‐PDA@Ni(OH)₂ resulted in lower Peak Heat Release Rate (PHRR) (decreased by 21.7%). Thus, the research provided an innovative functionalization method for manufacturing PLA composites with high performances.     

6-(N,N-Dimethylamino)-2-naphthoylacryl Acid: a Highly Selective and Sensitive Fluorescent Sensor of Copper(II)

A novel fluorescent probe, 6-(N,N-dimethylamino)-2-naphthoylacryl acid(ACADAN) was designed and synthesized as a fluorescent sensor for Cu²⁺ in aqueous media. Significant amplification of fluorescence signals without causing any discernible change of maximum fluorescence emission wavelength(λ_max) was observed upon the addition of Cu²⁺. Importantly, ACADAN is capable of recognizing Cu²⁺ selectively in aqueous media in the presence of various biologically relevant metal ions and the prevalent toxic metal ions in the environment with high sensitivity(detection limit was 0.1 μmol/L).     

Synthesis and properties of novel aromatic polyhydrazides and poly(amide–hydrazide)s based on the bis(ether benzoic acid)s from hydroquinone and substituted hydroquinones

4,4′‐(1,4‐Phenylenedioxy)dibenzoic acid as well as the 2‐methyl‐, 2‐tert‐butyl‐, or 2‐phenyl‐substituted derivatives of this dicarboxylic acid were synthesized in two main steps from p‐fluorobenzonitrile and hydroquinone or its methyl‐, tert‐butyl‐, or phenyl‐substituted derivatives. Polyhydrazides and poly(amide–hydrazide)s were prepared from these bis(ether benzoic acid)s or their diacyl chlorides with terephthalic dihydrazide, isophthalic dihydrazide, or p‐aminobenzoyl hydrazide by means of the phosphorylation reaction or low‐temperature solution polycondensation. Most of the hydrazide polymers and copolymers are amorphous and readily soluble in various polar solvents such as N‐methyl‐2‐pyrrolidone (NMP) and dimethyl sulfoxide. They could be solution‐cast into transparent, flexible, and tough films. These polyhydrazides and poly(amide–hydrazide)s had T_gs in the range of 167–237°C and could be thermally cyclodehydrated into the corresponding poly(1,3,4‐oxadiazole)s and poly(amide–1,3,4‐oxadiazole)s approximately in the region of 250–350°C, as evidenced by the DSC thermograms. All the tert‐butyl‐substituted oxadiazole polymers and those derived from isophthalic dihydrazide were organic soluble. The thermally converted oxadiazole polymers exhibited T_gs in the range of 208–243°C and did not show significant weight loss before 450°C either in nitrogen or in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1169–1181, 1999     

Preparation and characterization of a novel thermally stable unsaturated poly(ester-imide) based on 1,4-bis[2′-trifluoromethyl-4′-(4″-carboxylic acid)trimellitimido phenoxy]benzene

A novel thermally stable unsaturated poly(ester-imide) (UPEI-50) was prepared by thermal polycondensation of a diimidodicarboxylic acid monomer, 1,4-bis[2′-trifluoromethyl-4′-(4″-carboxylic acid)trimellitimido phenoxy]benzene (BTTB), maleic anhydride and 1,2-propylene glycol. The poly(ester-imide) resin obtained was found to be easily dissolved in glycidyl methacrylate (GMA) to give a homogeneous resin composition with low viscosity, which was then thermally cured into thermosetting poly(ester-imide)/glycidyl polymethacrylate polymer composite (UPEI-50/GMA). Effects of curing processing parameters such as the curing temperature and curing time, the reactive monomer concentration and the initiator amount etc. on curing reaction were systematically investigated. Experimental results indicated that the thermally cured UPEI-50/GMA polymer composite exhibited outstanding thermal stability, mechanical and electrical insulating properties.     

Polyelectrolyte complexes of soluble poly-2-[(methacryloyloxy)ethyl]trimethylammonium chloride and its hydrogels with poly(acrylic acid)

The complex formation of poly-2-[(methacryloyloxy)-ethyl]trimethylammonium chloride (PMADQUAT) with poly(acrylic acid) (PAA) of different molecular weights has been studied in aqueous solutions by potentiometric, viscometric, turbidimetric and FTIR spectroscopic methods. The formation of insoluble non-stoichiometric polyelectrolyte complexes has been shown. The stability of polyelectrolyte complexes in solutions of different pH and ionic strength has been evaluated. The formation of polyelectrolyte complexes between hydrogels of PMADQUAT and linear PAA of different molecular weights has been studied. It was shown that the molecular weight of PAA considerably affects the kinetics of interaction as well as the final state of gel-polymer complex.     

Synthesis and anticancer property of one Ce(III) compound based on 5-(2-pyrazinyl)tetrazole-2-acetic acid

Mononuclear [Ce(pztza)₂(H₂O)₆](pztza)·H₂O (1) (pztza = 5-(2-pyrazinyl)tetrazole-2-acetato) has been prepared and characterized by IR, elemental analysis and single-crystal X-ray diffraction. PEG_-5000 (poly(ethyleneglycol_-5000)) coated [Ce(pztza)₂(H₂O)₆](pztza)·H₂O nanoparticles (NPs) can disperse into distilled water. In vitro study on Hela cells shows that Hpztza is nontoxic while [Ce(pztza)₂(H₂O)₆](pztza)·H₂O NPs show high toxicity with half-maximal inhibitory concentration (IC₅₀) of 17 μg/mL (1.93 × 10^?5 M). In addition, such NPs can inhibit the migration of Hela cells effectively.     

Synthesis and properties of soluble and light-colored poly(amide-imide-imide)s based on tetraimide-dicarboxylic acid (TIDA) and various aromatic diamines: TIDA from 4,4′-oxydiphthalic anhydride, 1,4-bis(4-amino-2-trifluoromethylphenoxy)benzene, and 3-aminobenzoic acid

A new tetraimide-dicarboxylic acid (TIDA) I was synthesized starting from 3-aminobenzoic acid (m-ABA), 4,4′-oxydiphthalic anhydride (ODPA), and 1,4-bis(4-amino-2-trifluoromethylphenoxy)benzene (BAFPB) at a 2:2:1 molar ratio in N-methyl-2-pyrrolidone (NMP). A series of organosoluble, light-colored poly(amide-imide-imide)s (PAII, III_a-j) was prepared by triphenyl phosphite-activated polycondensation from the tetraimide-diacid I with various aromatic diamines (II_a-j). All the polymers were readily soluble in a variety of organic solvents such as NMP, N,N-dimethyl acetamide (DMAc), dimethyl sulfoxide, and even in less polar m-cresol and pyridine. Polymer films cast from DMAc had the cutoff wavelengths between 374 and 384 nm and had the b^∗ values in the range of 14.8-30.2. Polymers III_a-j afforded tough, transparent, and flexible films, which had tensile strengths ranging from 87 to 103 MPa, elongations at break from 11% to 37%, and initial moduli from 1.9 to 2.3 GPa. The glass transition temperatures of these polymers were in the range of 242-274 °C. They had 10% weight loss temperature above 526 °C and showed the char yield more than 55% residue at 800 °C in nitrogen.     

A new two‐dimensional CoII coordination polymer based on bis[4‐(2‐methyl‐1H‐imidazol‐1‐yl)phenyl] ether and biphenyl‐4,4′‐diyldicarboxylic acid: synthesis,crystal structure and photocatalytic degradation activity

A novel two‐dimensional Co^II coordination framework, namely poly[(μ₂‐biphenyl‐4,4′‐diyldicarboxylato‐κ²O⁴:O^4′){μ₂‐bis[4‐(2‐methyl‐1H‐imidazol‐1‐yl)phenyl] ether‐κ²N³:N^3′}cobalt(II)], [Co(C₁₄H₈O₄)(C₂₀H₁₈N₄O)]_n, has been prepared and characterized by IR, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. The crystal structure reveals that the compound has an achiral two‐dimensional layered structure based on opposite‐handed helical chains. In addition, it exhibits significant photocatalytic degradation activity for the degradation of methylene blue.     

Synthesis and characterization of a cadmium(II)–organic supramolecular coordination compound based on the multifunctional 2‐amino‐5‐sulfobenzoic acid ligand

Much attention has been paid by chemists to the construction of supramolecular coordination compounds based on the multifunctional ligand 5‐sulfosalicylic acid (H₃SSA) due to the structural and biological interest of these compounds. However, no coordination compounds have been reported for the multifunctional amino‐substituted sulfobenzoate ligand 2‐amino‐5‐sulfobenzoic acid (H₂asba). We expected that H₂asba could be a suitable building block for the assembly of supramolecular networks due to its interesting structural characteristics. The reaction of cadmium(II) nitrate with H₂asba in the presence of the auxiliary flexible dipyridylamide ligand N,N′‐bis[(pyridin‐4‐yl)methyl]oxamide (4bpme) under ambient conditions formed a new mixed‐ligand coordination compound, namely bis(3‐amino‐4‐carboxybenzenesulfonato‐κO¹)diaquabis{N,N′‐bis[(pyridin‐4‐yl)methyl]oxamide‐κN}cadmium(II)–N,N′‐bis[(pyridin‐4‐yl)methyl]oxamide–water (1/1/4), [Cd(C₇H₆NO₅S)₂(C₁₄H₁₄N₄O₂)₂(H₂O)₂]·C₁₄H₁₄N₄O₂·4H₂O, (1), which was characterized by single‐crystal and powder X‐ray diffraction analysis (PXRD), FT–IR spectroscopy, thermogravimetric analysis (TG), and UV–Vis and photoluminescence spectroscopic analyses in the solid state. The central Cd^II atom in (1) occupies a special position on a centre of inversion and exhibits a slightly distorted octahedral geometry, being coordinated by two N atoms from two monodentate 4bpme ligands, four O atoms from two monodentate 4‐amino‐3‐carboxybenzenesulfonate (Hasba⁻) ligands and two coordinated water molecules. Interestingly, complex (1) further extends into a threefold polycatenated 0D→2D (0D is zero‐dimensional and 2D is two‐dimensional) interpenetrated supramolecular two‐dimensional (4,4) layer through intermolecular hydrogen bonding. The interlayer hydrogen bonding further links adjacent threefold polycatenated two‐dimensional layers into a three‐dimensional network. The optical properties of complex (1) indicate that it may be used as a potential indirect band gap semiconductor material. Complex (1) exhibits an irreversible dehydration–rehydration behaviour. The fluorescence properties have also been investigated in the solid state at room temperature.