Crystal structures and phase transitions of SrZr(PO4)2-BaZr(PO4)2 solid solutions

A complete series of solid solutions was prepared in the SrZr(PO₄)₂-BaZr(PO₄)₂ system and examined by conventional X-ray powder diffraction (XRPD). The crystals of Sr_xBa_1−xZr(PO₄)₂ with x?0.1 were isomorphous with yavapaiite (KFe(SO₄)₂, space group C2/m). The solid solution with 0.2?x?0.7 has been composed of a new phase, showing a superstructure along the a-axis (c-axis of the yavapaiite substructure). The crystals with 0.8?x?0.9 were composed of both the new phase and the triclinic phase, the latter being isostructural with SrZr(PO₄)₂ (x=1). The crystal structure of the new phase has been determined using direct methods, and it has been further refined by the Rietveld method. The crystal of Sr_0.7Ba_0.3Zr(PO₄)₂ (x=0.7) is monoclinic (space group P2/c, Z=4 and D_x/Mg m⁻³=3.73) with a=1.53370(8) nm, b=0.52991(3) nm, c=0.84132(4) nm, β=92.278(1)° and V=0.68321(6) nm³. Final reliability indices are R_wp=7.32%, R_p=5.60% and R_B=3.22%. The powder specimen was also examined by high-temperature XRPD and differential thermal analysis (DTA) to reveal the occurrence of two phase transitions during heating; the space group changed from P2/c to C2/m at ∼400 K, followed by the monoclinic-to-hexagonal (or trigonal) transition at 1060 K. The P2/c-to-C2/m transition has been, for the first time, described in the yavapaiite-type compounds.     

Efficient UV-emitting X-ray phosphors: octahedral Zr(PO4)6 luminescence centers in potassium hafnium–zirconium phosphates K2Hf1−xZrx(PO4)2 and KHf2(1−x)Zr2x(PO4)3

Potassium hafnium–zirconium phosphates, K₂Hf_1−xZr_x(PO₄)₂ and KHf_2(1−x)Zr_2x(PO₄)₃, are broad-band UV-emitting phosphors. At room temperature, they have emission peak maxima at approximately 322 and 305 nm, respectively, under 30 kV peak molybdenum X-ray excitation. Both phosphors demonstrate luminescence efficiencies that make them up to 60% as bright as commercially available CaWO₄ Hi-Plus. The solid-state and flux synthesis conditions, and X-ray excited UV luminescence of these two phosphors are discussed. Even though the two compounds have different atomic structures, they contain zirconium in the same active luminescence environment as that found in highly efficient UV-emitting BaHf_1−xZr_x(PO₄)₂. All the three materials have hafnium and zirconium in octahedral coordination via oxygen-atom corner sharing with six separate PO₄ tetrahedra. This octahedral Zr(PO₄)₆ moiety appears to be an important structural element for efficient X-ray excited luminescence, as are the edge-sharing octahedral TaO₆ chains for tantalate emission.     

Preparation and characterization of lithium ion-conducting glass-ceramics in the Li1 + xCrxGe2 − x(PO4)3 system

Li₂O–Cr₂O₃–GeO₂–P₂O₅ based glasses were synthesized by a conventional melt-quenching method and successfully converted into glass-ceramics through heat treatment. Experimental results of DTA, XRD, ac impedance techniques and FESEM indicated that Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics treated at 900 °C for 12 h in the Li_1 + xCr_xGe_2 − x(PO₄)₃ (x = 0–0.8) system exhibited the best glass stability against crystallization and the highest ambient conductivity value of 6.81 × 10⁻⁴ S/cm with an activation energy as low as 26.9 kJ/mol. In addition, the Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics displayed good chemical stability against lithium metal at room temperature. The good thermal and chemical stability, excellent conducting property, easy preparation and low cost make it promising to be used as solid-state electrolytes for all-solid-state lithium batteries.     

Influence of ceramic process and Eu content on the composite multiferroic properties of the Ba6−2xLn2xFe1+xNb9−xO30 TTB system

The present work reports the optimisation of the composition and elaboration process of Ba_6−2xLn_2xFe_1+xNb_9−xO₃₀ (0.6 < x < 1.0), a composite multiferroic below 440 K. Both firing and sintering conditions have been investigated in order to lower the two spurious phases content and to improve the ceramic quality. The Eu content has also been varied, with subsequent adjustment of cationic content to maintain charge compensation and site occupancies. The evolution of phase content, dielectric and magnetic properties has been evaluated with respect to these parameters. It was found that optimal processing parameters allow a significant improvement of dielectric properties but leave magnetic properties unaffected. Eu content modification impacts both the dielectric and magnetic properties of the TTB samples and changes their dielectric behaviour from ferroelectric to relaxor.     

Structural and magnetic properties of the solid solution () YMn1−x(Cu3/4Mo1/4)xO3

Recently, the ferroelectromagnet YMnO₃ has been the focus of interest because it exhibits both antiferromagnetism (Néel temperature 80 K) and ferroelectricity (Curie temperature 914 K). There have been no reports of complete YMn_1−xM_xO₃ solid solutions in which substitution of the foreign M cation preserves the hexagonal P6₃cm structure. In contrast there exist several homeotypic phases with the general formula, Ln_1+nCu_nMO_3+3n (n=1 (M=Ti), 2 (M=V) and 3 (M=Mo); Ln: lanthanide). Several YMn_1−x(Cu_3/4Mo_1/4)_xO₃ compounds have been synthesized. The solid solution, from YMnO₃ (x=0) to YCu_3/4Mo_1/4O₃ (x=1) has been characterized by X-ray diffraction and transmission electron microscopy study. For 0<x<0.9, the compounds are found to crystallize in the non-centrosymmetric structure, space group P6₃cm, of YMnO₃. The Mn-free end member, x=1, crystallizes in a complex multiple cell, the superstructure being associated to Cu³⁺/Mo⁶⁺ cationic ordering. Dilution of the Mn³⁺ magnetic array by the paramagnetic (Cu²⁺) and diamagnetic (Mo⁶⁺) cations is found to decrease the antiferromagnetic ordering temperature and it becomes undetectable for x0.5 compositions.     

Preparation and electrical properties of new oxide ion conductors Ce6−xDyxMoO15−δ (0.0 ≤ x ≤ 1.8)

Ce_6−xDy_xMoO_15−δ (0.0 ≤ x ≤ 1.8) were synthesized by modified sol–gel method. Structural and electrical properties were investigated by means of X-ray diffraction (XRD), Raman, X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The XRD patterns showed that the materials were single phase with a cubic fluorite structure. Impedance spectroscopy measurement in the temperature range between 350 °C and 800 °C indicated a sharp increase in conductivity for the system containing small amount of Dy₂O₃. The Ce_5.6Dy_0.4MoO_15−δ detected to be the best conducting phase with the highest conductivity (σ_t = 8.93 × 10⁻³ S cm⁻¹) is higher than that of Ce_5.6Sm_0.4MoO_15−δ (σ_t = 2.93 × 10⁻³ S cm⁻¹) at 800 °C, and the corresponding activation energy of Ce_5.6Dy_0.4MoO_15−δ (0.994 eV) is lower than that of Ce_5.6Sm_0.4MoO_15−δ (1.002 eV).     

Critical covalence and superconductivity in Ln2−xCexCuO4

The variations of superconductive properties with x of the n-type Ln_2−xCe_xCuO₄ (Ln = La_0.5Nd_0.5, Nd, or Gd) systems have been investigated. As the size of Ln³⁺ decreases, (i) the solubility limit x of Ce decreases, (ii) the value of x at which a transition from antiferromagnetic semiconductor to superconductor occurs increases, and (iii) the width Δx of the superconductive region decreases. The decreasing solubility of Ce with decreasing size of Ln³⁺ is due to decreasing tensile strain in the CuO₂ sheets. The progressive shift of the semiconductor to superconductor transition to higher x values with decreasing size of Ln³⁺ is explained on the basis of increasing electrostatic Madelung energy E_M caused by decreasing Cu---O bond length. A larger E_M means a larger charge transfer gap Δ and a smaller covalent-mixing parameter λ and bandwidth W; so a decreasing size of Ln³⁺ necessitates a higher level of Ce-doping in order to achieve a critical covalence essential for superconductivity to occur.     

Structure and redox properties of CexPr1−xO2−δ mixed oxides and their catalytic activities for CO, CH3OH and CH4 combustion

A series of Ce_xPr_1−xO_2−δ mixed oxides were synthesized by a sol–gel method and characterized by Raman, XRD and TPR techniques. The oxidation activity for CO, CH₃OH and CH₄ on these mixed oxides was investigated. When the value x was changed from 1.0 to 0.8, only a cubic phase CeO₂ was observed. The samples were greatly crystallized in the range of the value x from 0.99 to 0.80, which is due to the formation of solid solutions caused by the complete insertion of Pr into the CeO₂ crystal lattices. Raman bands at 465 and 1150 cm⁻¹ in Ce_xPr_1−xO_2−δ samples are attributed to the Raman active F_2g mode of CeO₂. The broad band at around 570 cm⁻¹ in the region of 0.3 ≤ x ≤ 0.99 can be linked to oxygen vacancies. The new band at 195 cm⁻¹ may be ascribed to the asymmetric vibration caused by the formation of oxygen vacancies. The TPR profile of Pr₆O₁₁ shows two reduction peaks and the reduction process is followed: . The reduction temperature of Ce_xPr_1−xO_2−δ mixed oxides is lower than those of Pr₆O₁₁ or CeO₂. TPR results indicate that Ce_xPr_1−xO_2−δ mixed oxides have higher redox properties because of the formation of Ce_xPr_1−xO_2−δ solid solutions. The presence of the oxygen vacancies favors CO and CH₃OH oxidation, while the activity of CH₄ oxidation is mostly related to reduction temperatures and redox properties.     

Luminescent properties of the potassium zinc phosphates of composition K1−xTlxZn(PO3)3

Crystalline and glassy K_1−xTl_xZn(PO₃)₃ polyphosphates have been synthesized and characterized. UV–visible spectroscopy was systematically used in order to analyze the optical properties of Tl⁺ ions both in crystalline and glassy forms with the similar compositions. The investigated polyphosphates can be considered as a model system since the spectroscopic properties of Tl⁺ ions in the glasses could be deduced by comparison with those in crystals. From structural point of view, in the crystalline forms the thallium ions are six-fold coordinated in a dissymmetrical oxygenated sites. Three luminescences (α, A_X, A_T) have been then observed and were attributed to the isolated Tl⁺ ions. In the glassy forms, an additional luminescence (D) has been detected in the low-energy range and was assigned to the Tl⁺ pairs formation. The relationship between the Tl⁺ site symmetry and its optical properties is discussed in the context of the Fukuda's model.     

Synthesis and low temperature fluorination of the alkaline-earth palladates Ba2−xSrxPdO3 (x = 0–2)

Since the discovery of superconductivity in Sr₂CuO₂F_2+δ there has been an increased interest in ternary oxide-fluorides. Sr₂CuO₂F_2+δ is prepared via low temperature (T = 220 °C) reaction routes. Low temperature fluorination induces an interesting structural rearrangement in the parent compound Sr₂CuO₃, which is a one-dimensional material containing linear chains of vertex sharing CuO₄ squares along the crystallographic b axis. Upon fluorination, one oxide is substituted by two fluorides and Cu²⁺ becomes octahedrally coordinated by four oxides and two fluorides. The fluorinated compound Sr₂CuO₂F_2+δ displays the T-type structure (La₂CuO₄). Insertion of excess fluorine, δ, also takes place and this fluorine occupies interstitial sites in the T structure. Although the starting material Ca₂CuO₃ is isostructural to Sr₂CuO₃, Ca₂CuO₂F_2+δ displays the T′ (Nd₂CuO₄) structure due to the smaller radius of Ca²⁺ compared to that of Sr²⁺.

The alkaline-earth palladates with the general formula A₂PdO₃ (A = Ba, Sr) are isostructural with the A₂CuO₃(A = Ca, Sr) materials. We prepared the Ba_2−xSr_xPdO₃ (x = 0–2) series and performed low temperature fluorination, which led to the synthesis of the series Ba_2−xSr_xPdO₂F_2+δ (0 ≤ x ≤ 1.5). All the compounds in the Ba_2−xSr_xPdO₂F_2+δ series show T′ structure (Ca₂CuO₂F_2+δ). Similarities and differences with Sr₂CuO₂F_2+δ and Ca₂CuO₂F_2+δ will be discussed.     

Li3−xTi2(PO4)3 (0 ≤ x ≤ 1): A new mixed valent titanium(III/IV) phosphate with a NASICON-type structure

A new NASICON-related structure of lithium titanium phosphate Li_2.72Ti₂(PO₄)₃ has been determined. This compound crystallizes in an orthorhombic system, Pbcn, with a = 12.064 (3) Å, b = 8.663 (3) Å, c = 8.711 (4) Å, V = 910.4 (8) ų, and Z = 4. The single crystal structure of this novel mixed valent titanium(III/IV) phosphate reveals one titanium atom per asymmetric unit. Two lithium sites are characterized by a pair of distorted polyhedra, Li(1)O₄ and Li(2)O₅, which share a common edge resulting in a short Li(1) … Li(2) distance, i.e., 2.29 (5) Å. Magnetic susceptibility and microprobe analysis confirmed the structural composition. The room temperature ionic conductivity is comparable with that of the known Li_1+xTi^IV_2−xIn^III_x(PO₄)₃, which suggests possible fast ionic conductivity.     

Synthesis and X-ray crystal structures of [Ru4H4(CO) 11(PPh3)] and [Ru4−x IrxH2−x(CO) 12(PPh3) ] (x = 0 or 1)

Three tetranuclear clusters [Ru₄H₄(CO)₁₁(PPh₃)] (1), [Ru₄H₂(CO)₁₂(PPh₃)] (2) and [Ru₃IrH(CO)₁₂(PPh₃)] (3) were formed in the reaction of [Ir(CO)Cl(PPh₃)₂] and Na[Ru₃H(CO)₁₁] in tetrahydrofuran. Complexes 1–3 were characterized by IR and ¹H and ³¹P NMR, and the structure of the clusters was confirmed by single crystal X-ray analysis. In 2 and 3 one of the carbonyls bridges between two ruthenium atoms; otherwise the compounds contain only terminal carbonyls.     

Synthesis of ternary and quaternary CuInxGa1−xSe2 (0 ≤ x ≤ 1) semiconductor nanocrystals

Semiconducting CuIn_xGa_1−xSe₂ nanocrystals (20–30 nm) have been synthesized over the whole composition range using a facile solution-based method. Depending on the synthesis conditions, the nanocrystals exhibit a cubic or spherical morphology with a narrow size distribution. The band gap increases with increasing Ga concentration and the values are close to those observed in the bulk.     

Synthesis and electrical properties of Li1+ x M x Ti2– x (PO4)3 (where M =Sc, Al, Fe, Y; x =0.3) superionic ceramics

Compounds of the system Li_{1+ x} M _x Ti_{2– x} (PO₄)₃ (where M=Sc, Al, Fe, Y; x=0.3) were synthesized by a solid-state reaction and studied by X-ray diffraction. The ceramic samples were sintered and investigated by complex impedance spectroscopy in the frequency range 10⁶–1.2×10⁹ Hz in the temperature range 300–600 K. Two relaxation dispersions related to the fast Li⁺ ion transport in bulk and grain boundaries were found. The activation energies of the bulk conductivity and relaxation frequency were obtained from the slops of Arrhenius plots. The values of the activation energies of the bulk ionic conductivity and relaxation frequency were found to be very similar in all the materials investigated. That can be attributed to the fact that the temperature dependences of the bulk conductivity are caused only by the mobility of the fast Li⁺ ions, while the number of charge carriers remains constant with temperature. Electronic Publication     

Structure and stability of closo-BnHn−2(CO)2 (n = 5–12)

Closo-B_nH_n−2(CO)₂ (n = 5–12), isolobal analogues of closo-C₂B_n−2H_n, have been investigated at the B3LYP/6-311+G^**density functional level of theory. The most stable isomers of closo-B_nH_n−2(CO)₂ are similar to those of closo-C₂B_n−2H_n in geometric patterns apart from closo-B₆H₄(CO)₂, and closo-B_nH_n−2(CO)₂ is much less strained than closo-C₂B_n−2H_n. Energetic analysis identifies closo-B₆H₄(CO)₂, closo-B₁₂H₁₀(CO)₂ and closo-B₁₀H₈(CO)₂ to be most stable, of which the latter two cages have been prepared experimentally. On the basis of the negative and rather large nucleus independent chemical shifts (NICS), closo-B_nH_n−2(CO)₂ are aromatic. To aid further experimental study, the CO stretching frequencies have been computed.     

Phase equilibria and crystal structure of the solid solution LaFe1−xNixO3−δ (0 ≤ x ≤ 1)

Phase equilibria in the LaFeO₃–“LaNiO₃” were studied at 1100 °C in air. The samples were synthesized by standard ceramic and/or solution route via nitrate or citrate precursors. According to the results of XRD it was found that the homogeneity ranges of LaFe_1−xNi_xO_3−δ solid solution lay within 0.0 ≤ x ≤ 0.4 (sp.gr. Pbnm) and 0.6 ≤ x ≤ 0.8 (sp.gr. ). The structural parameters (bond lengths, atom coordinates) for the single-phase samples were refined using Rietveld analysis. The unit cell parameters versus LaFe_1−xNi_xO_3−δ composition are presented.     

Photoluminescence of Ce, Pr and Tb activated Sr3Ln(PO4)3 under VUV-UV excitation

The spectroscopic properties in VUV-Vis range for the eulytite structural phosphors Sr₃Gd(PO₄)₃:Ln³⁺ (Ln³⁺=Ce³⁺, Pr³⁺, Tb³⁺), Sr₃Ce(PO₄)₃, Sr₃Gd(PO₄)₃ and Sr₃Tb(PO₄)₃ were investigated. The bands near 170 nm in VUV excitation spectra are assumed to connect with the host lattices related absorption. The f-d transitions of Ce³⁺, Pr³⁺ and Tb³⁺ in the host lattices are assigned and corroborated. A convenient experiment formulation on the relationship between the lowest f-d transition energies and n value for trivalent 4fⁿ-series rare earth ions in these host lattices is applied.     

Synthesis and structure of two lanthanide complexes with isonicotinic acid N-oxide (HL): [Ln(L)2(H2O)4]n·(NO3)n·n(H2O) (Ln = Sm or Tb)

Two new lanthanide complexes of isonicotinic acid N-oxide (HL), namely [Ln(L)₂(H₂O)₄]_n·(NO₃)_n·n(H₂O) for Ln = Sm or Tb, have been synthesized and characterized by spectroscopic and crystallographic methods. IR spectra suggest that isonicotinic acid N-oxide acts as a O,O′-bidentate ligand, the N-oxide group as well as the nitrate group are not involved in coordination. Single crystal analyses have shown that both complexes are isomorphous, where the Ln(III) centers are eight coordinated by four O atoms of four water ligands and other four O atoms of two isonicotinic acid N-oxide ligands. The carboxylate groups are only involved in the bidentate syn–syn bridging mode into infinite chains. Hydrogen bonds between aqua ligands, lattice molecules, nitrate and N-oxide groups are formed giving a three-dimensional network.     

Thin films of Ln1−xSrxCoO3 (Ln=La, Nd and Gd) and SrRuO3 by nebulized spray pyrolysis

Thin films of La_1−xSr_xCoO₃, Nd_0.5Sr_0.5CoO₃, Gd_0.5Sr_0.5CoO₃ and SrRuO₃ have been deposited on Si(100), LaAlO₃(100) and SrTiO₃(100) single crystal substrates by nebulized spray pyrolysis. The films deposited on Si are generally polycrystalline, but they are highly oriented on the oxide substrates. The cobaltate films are generally not metallic, but exhibit low resistivity specially when x=0.3 and 0.5, the latter also exhibiting ferromagnetic characteristics. Films of La_0.7Sr_0.3CoO₃ show negative magnetoresistance of 35% around 180 K. Films of SrRuO₃ are metallic on Si and LaAlO₃ substrates but show an insulator–metal transition on SrTiO₃ around 130 K, around which temperature negative magnetoresistance is observed.     

Crystal chemistry, modulated structure, and electrical conductivity in the oxygen excess scheelite-based compounds La1−xThxNbO4+x/2 and LaNb1−xWxO4+x/2

For La_1−xTh_xNbO_4+x/2, three phases with broad homogeneity regions occur, for 0.075 ≤ x ≤ 0.37, 0.41 < x < 0.61, and 0.65 ≤ x ≤ 0.74. All are related to the scheelite structure type, with at least the first exhibiting an incommensurate structural modulation. An analogous structurally modulated phase was found for LaNb_1−xW_xO_4+x/2 for 0.11 ≤ x ≤ 0.22. Additional phases occur at La_0.2Th_0.8NbO_4.4 and LaNb_0.4W_0.6O_4.3. The electrical conductivity and the direction and wavelength of the structural modulation have been characterized for the La_1−xTh_xNbO_4+x/2 phase with 0.075 ≤ x ≤ 0.37.