Effect of variable viscosity on MHD non-Darcy mixed convective heat transfer over a stretching sheet embedded in a porous medium with non-uniform heat source/sink

An analysis has been presented to investigate the effect of temperature-dependent viscosity on non-Darcy MHD mixed convective heat transfer past a porous medium by taking into account of Ohmic dissipation and non-uniform heat source/sink. Thermal boundary layer equation takes into account of viscous dissipation and Ohmic dissipation due to transverse magnetic field and electric field. The governing fundamental equations are first transformed into system of ordinary differential equations using self-similarity transformation and are solved numerically by using the fifth-order Runge–Kutta–Fehlberg method with shooting technique for various values of the physical parameters. The effects of variable viscosity, porosity, Eckert number, Prandtl number, magnetic field, electric field and non-uniform heat source/sink parameters on velocity and temperature profiles are analyzed and discussed. Favorable comparisons with previously published work on various special cases of the problem are obtained. Numerical results on the development of the local skin-friction co-efficient and local Nusselt number with non-uniform heat source/sink are tabulated for various physical parameters to show the interesting aspects of the solution.     

Lie group analysis for thermal-diffusion and diffusion-thermo effects on free convective flow over a porous stretching surface with variable stream conditions in the presence of thermophoresis particle deposition

A study has been carried out to obtain the solutions for heat and mass transfer from natural convection flow along a vertical surface with temperature-dependent fluid viscosity embedded in a porous medium due to thermal-diffusion (Soret) and diffusion-thermo (Dufour) effects. This paper concerns with a steady two-dimensional flow of incompressible fluid over a vertical stretching sheet. The fluid viscosity is assumed to vary as a linear function of temperature. A scaling group of transformations is applied to the governing equations. The impact of thermophoresis particle deposition with chemical reaction in the presence of thermal-diffusion and diffusion-thermo effects plays an important role on the temperature and concentration boundary layer. The results thus obtained are presented graphically and discussed.     

MHD non-Darcy mixed convective diffusion of species over a stretching sheet embedded in a porous medium with non-uniform heat source/sink, variable viscosity and Soret effect

The effects of temperature dependent viscosity and non-uniform heat source/sink on non-Darcy MHD mixed convection boundary layer flow over a vertical stretching sheet embedded in a fluid-saturated porous media is studied in this paper. Boundary layer equations are transformed into ordinary differential equations using self-similarity transformation which are then solved numerically using fifth-order Runge-Kutta-Fehlberg method with shooting technique for various values of the governing parameters. The effects of variable viscosity, porosity, electric field parameter, non-uniform heat source/sink parameters, Soret number and Schmidt number on concentration profiles are analyzed and discussed. Favorable comparisons with previously published work on various special cases of the problem are obtained. Numerical results for variation of the local Sherwood number with buoyancy parameter, Schmidt number, and Soret number are reported graphically to show some interesting aspects of the physical parameters.     

Unsteady flow with heat and mass transfer of a third grade fluid over a stretching surface in the presence of chemical reaction

This paper describes the unsteady flow with heat and mass transfer characteristics in a third grade fluid bounded by a stretching sheet. The resulting problems are solved by means of homotopy analysis method (HAM). Convergence of derived series solutions is explicitly discussed. Graphical results for various interesting parameters are presented and analyzed.     

The effect of variable viscosity on MHD viscoelastic fluid flow and heat transfer over a stretching sheet

An analysis has been carried out to study the momentum and heat transfer characteristics in an incompressible electrically conducting non-Newtonian boundary layer flow of a viscoelastic fluid over a stretching sheet. The partial differential equations governing the flow and heat transfer characteristics are converted into highly non-linear coupled ordinary differential equations by similarity transformations. The effect of variable fluid viscosity, Magnetic parameter, Prandtl number, variable thermal conductivity, heat source/sink parameter and thermal radiation parameter are analyzed for velocity, temperature fields, and wall temperature gradient. The resultant coupled highly non-linear ordinary differential equations are solved numerically by employing a shooting technique with fourth order Runge–Kutta integration scheme. The fluid viscosity and thermal conductivity, respectively, assumed to vary as an inverse and linear function of temperature. The analysis reveals that the wall temperature profile decreases significantly due to increase in magnetic field parameter. Further, it is noticed that the skin friction of the sheet decreases due to increase in the Magnetic parameter of the flow characteristics.     

Lie group analysis of natural convection heat and mass transfer in an inclined surface with chemical reaction

In this paper we examine the convective flow, heat and mass transfer of an incompressible viscous fluid past a semi-infinite inclined surface with first-order homogeneous chemical reaction by Lie group analysis. The governing partial differential equations are reduced to a system of ordinary differential equations using scaling symmetries. Numerical solutions of the resulting ordinary differential equations are obtained using the fourth-order Runge–Kutta method. From the numerical results, it is observed that the thickness of the momentum boundary layer increases with increasing the chemical reaction parameter and the Schmidt number. The thicknesses of the thermal and concentration boundary layers are decreased with increasing the chemical reaction parameter and the Schmidt number.     

Convective heat and mass transfer in three-dimensional mixed convection flow of viscoelastic fluid in presence of chemical reaction and heat source/sink

Heat and mass transfer effects in the three-dimensional mixed convection flow of a viscoelastic fluid with internal heat source/sink and chemical reaction have been investigated in the present work. The flow generation is because of an exponentially stretching surface. Magnetic field normal to the direction of flow is considered. Convective conditions at the surface are also encountered. Appropriate similarity transformations are utilized to reduce the boundary layer partial differential equations into the ordinary differential equations. The homotopy analysis method is used to develop the solution expressions. Impacts of different controlling parameters such as ratio parameter, Hartman number, internal heat source/sink, chemical reaction, mixed convection, concentration buoyancy parameter and Biot numbers on the velocity, temperature and concentration profiles are analyzed. The local Nusselt and Sherwood numbers are sketched and examined.     

Effects of Soret Dufour,chemical reaction and thermal radiation on MHD non-Darcy unsteady mixed convective heat and mass transfer over a stretching sheet

A study has been carried out to analyze the combined effects of Soret (thermal-diffusion) and Dufour (diffusion-thermo) on unsteady MHD non-Darcy mixed convection over a stretching sheet embedded in a saturated porous medium in the presence of thermal radiation, viscous dissipation and first-order chemical reaction. Energy equation takes into account of viscous dissipation, thermal radiation and Soret effects. The governing differential equations are transformed into a set of non-linear coupled ordinary differential equations and solved using similarity analysis with numerical technique using appropriate boundary conditions for various physical parameters. The numerical solution for the governing nonlinear boundary value problem is based on shooting algorithm with Runge–Kutta–Fehlberg integration scheme over the entire range of physical parameters. The effects of various physical parameters on the dimensionless velocity, temperature and concentration profiles are depicted graphically and analyzed in detail. Favorable comparisons with previously published work on various special cases of the problem are obtained. Numerical results for local skin-friction, local Nusselt number, and local Sherwood number are tabulated for different physical parameters.     

Heat transfer in MHD viscoelastic boundary layer flow over a stretching sheet with non-uniform heat source/sink

This paper presents the study of momentum and heat transfer characteristics in a hydromagnetic flow of viscoelastic liquid over a stretching sheet with non-uniform heat source, where the flow is generated due to a linear stretching of the sheet and influenced by uniform magnetic field applied vertically. Here an analysis has been carried out to study the effect of magnetic field on the visco-elastic liquid flow and heat transfer over a stretching sheet with non-uniform heat source. The non-linear boundary layer equation for momentum is converted into ordinary differential equation by means of similarity transformation and is solved exactly. Heat transfer differential equation is also solved analytically. The effect of magnetic field on velocity, skin friction and temperature profiles are presented graphically and discussed.     

MHD power-law fluid flow and heat transfer over a non-isothermal stretching sheet

This article presents a numerical solution for the magnetohydrodynamic (MHD) non-Newtonian power-law fluid flow over a semi-infinite non-isothermal stretching sheet with internal heat generation/absorption. The flow is caused by linear stretching of a sheet from an impermeable wall. Thermal conductivity is assumed to vary linearly with temperature. The governing partial differential equations of momentum and energy are converted into ordinary differential equations by using a classical similarity transformation along with appropriate boundary conditions. The intricate coupled non-linear boundary value problem has been solved by Keller box method. It is important to note that the momentum and thermal boundary layer thickness decrease with increase in the power-law index in presence/absence of variable thermal conductivity.     

Similarity solution in MHD: Effects of thermal diffusion and diffusion thermo on free convective heat and mass transfer over a stretching surface considering suction or injection

An analysis is carried out to study free convective heat and mass transfer of an incompressible, electrically conducting fluid over a stretching sheet in the presence of suction and injection with thermal-diffusion (Soret) and diffusion-thermo (Dufour) effects. The similarity solutions are obtained using scaling transformations. Furthermore, the similarity equations are solved numerically by using shooting technique with fourth-order Runge–Kutta integration scheme. A comparison with previously published work is performed and the results are found to be in good agreement. Numerical results of the local skin friction coefficient, the local Nusselt number and the local Sherwood number as well as the velocity, the temperature and the concentration profiles are presented for different physical parameters. The result indicates: (i) for fluids with medium molecular weight (H₂, air), Dufour and Soret effects should not be neglected; and (ii) the suction and injection parameter has significant impact in controlling the rate of heat transfer in the boundary layer.     

Effects of temperature-dependent viscosity and variable thermal conductivity on MHD non-Darcy mixed convective diffusion of species over a stretching sheet

A numerical model is presented to study the effects of temperature-dependent viscosity and variable thermal conductivity on mixed convection problem. Two important types of wall heating conditions namely, prescribed surface temperature and prescribed wall heat flux which arise in polymer industries are considered. The problem is solved numerically by using the fifth-order Runge–Kutta Fehlberg method with shooting technique. It is found that the Prandtl number is to decrease the skin friction coefficient, local Nusselt number and local Sherwood number. The effects of non-uniform heat source/sink and porous parameter are analyzed on velocity, temperature, skin friction co-efficient, Nusselt and Sherwood numbers.     

Heat and mass transfer in MHD non-Darcian flow of a micropolar fluid over a stretching sheet embedded in a porous media with non-uniform heat source and thermal radiation

A mathematical analysis has been carried out to study magnetohydrodynamic boundary layer flow, heat and mass transfer characteristic on steady two-dimensional flow of a micropolar fluid over a stretching sheet embedded in a non-Darcian porous medium with uniform magnetic field. Momentum boundary layer equation takes into account of transverse magnetic field whereas energy equation takes into account of Ohmic dissipation due to transverse magnetic field, thermal radiation and non-uniform source effects. An analysis has been performed for heating process namely the prescribed wall heat flux (PHF case). The governing system of partial differential equations is first transformed into a system of non-linear ordinary differential equations using similarity transformation. The transformed equations are non-linear coupled differential equations which are then linearized by quasi-linearization method and solved very efficiently by finite-difference method. Favorable comparisons with previously published work on various special cases of the problem are obtained. The effects of various physical parameters on velocity, temperature, concentration distributions are presented graphically and in tabular form.     

Unsteady MHD stagnation-point flow with heat and mass transfer in a micropolar fluid in the presence of thermophoresis and suction/injection

The effect of suction or injection on unsteady MHD flow with heat and mass transfer in a micropolar fluid near the forward stagnation point flow with thermophoresis has been investigated. The problem is reduced to a system of non-dimensional partial differential equations, which are solved numerically using the implicit finite-difference scheme. Profiles for velocity, microrotation, temperature and concentration as well as the skin friction, the rate of heat and mass transfer are determined and presented graphically for physical parameters. The results show that the suction increases the skin friction, the rate of heat and mass transfer while opposite trend is observed for the case of injection. It is also found that the effect of thermophoresis is decrease the concentration boundary layer thickness.     

Finite element analysis of hydromagnetic flow and heat transfer of a heat generation fluid over a surface embedded in a non-Darcian porous medium in the presence of chemical reaction

An analysis is carried out to study the flow, chemical reaction and mass transfer of a steady laminar boundary layer of an electrically conducting and heat generating fluid driven by a continuously moving porous surface embedded in a non-Darcian porous medium in the presence of a transfer magnetic field. The governing partial differential equations are converted into ordinary differential equations by similarity transformation and are solved numerically by using the finite element method. The results obtained are presented graphically for velocity, temperature and concentration profiles, as well as the Sherwood number for various parameters entering into the problem.     

Combined effects of non-uniform heat source/sink and thermal radiation on heat transfer over an unsteady stretching permeable surface

The present paper is concerned with the study of flow and heat transfer characteristics in the unsteady laminar boundary layer flow of an incompressible viscous fluid over continuously stretching permeable surface in the presence of a non-uniform heat source/sink and thermal radiation. The unsteadiness in the flow and temperature fields is because of the time-dependent stretching velocity and surface temperature. Similarity transformations are used to convert the governing time-dependent nonlinear boundary layer equations for momentum and thermal energy are reduced to a system of nonlinear ordinary differential equations containing Prandtl number, non-uniform heat source/sink parameter, thermal radiation and unsteadiness parameter with appropriate boundary conditions. These equations are solved numerically by applying shooting method using Runge–Kutta–Fehlberg method. Comparison of numerical results is made with the earlier published results under limiting cases. The effects of the unsteadiness parameter, thermal radiation, suction/injection parameter, non-uniform heat source/sink parameter on flow and heat transfer characteristics as well as on the local Nusselt number are shown graphically.     

Unsteady flow of a Maxwell fluid over a stretching surface in presence of chemical reaction

An analysis is presented for unsteady two-dimensional flow of a Maxwell fluid over a stretching surface in presence of a first order constructive/destructive chemical reaction. Using suitable transformations, the governing partial differential equations are converted to ordinary one and are then solved numerically by shooting method. The flow fields and mass transfer are significantly influenced by the governing parameters. Fluid velocity initially decreases with increasing unsteadiness parameter and concentration decreases significantly due to unsteadiness. The effect of increasing values of the Maxwell parameter is to suppress the velocity field. But the concentration is enhanced with increasing Maxwell parameter.     

Heat transfer in MHD viscoelastic boundary layer flow over a stretching sheet with thermal radiation and non-uniform heat source/sink

An analysis has been carried out to study the flow and heat transfer characteristics for MHD viscoelastic boundary layer flow over an impermeable stretching sheet with space and temperature dependent internal heat generation/absorption (non-uniform heat source/sink), viscous dissipation, thermal radiation and magnetic field due to frictional heating. The flow is generated due to linear stretching of the sheet and influenced by uniform magnetic field, which is applied vertically in the flow region. The governing partial differential equations for the flow and heat transfer are transformed into ordinary differential equations by a suitable similarity transformation. The governing equations with the appropriate conditions are solved exactly. The effects of viscoelastic parameter and magnetic parameter on skin friction and the effects of viscous dissipation, non-uniform heat source/sink and the thermal radiation on heat transfer characteristics for two general cases namely, the prescribed surface temperature (PST) case and the prescribed wall heat flux (PHF) case are presented graphically and discussed. The numerical results for the wall temperature gradient (the Nusselt number) are presented in tables and are discussed.     

The effect of mass transfer on MHD free convective radiating flow over an impulsively started vertical plate embedded in a porous medium

The laminar convective heat and mass transfer flow of an incompressible, viscous, electrically conducting fluid over an impulsively started vertical plate with conduction-radiation embedded in a porous medium in presence of transverse magnetic eld has been studied. An exact solution is derived by solving the dimensionless governing coupled partial differential equations. As the equations are nonlinear, so Laplace transform technique is used to solve it. The eects of important physical parameters on the velocity, temperature, concentration, skin friction, Nusselt number and Sherwood number have been analyzed through graphs. The results of the present study agree well with the previous solutions obtained without mass transfer. After the consideration of mass transfer, some dierent results are noticed. Applications of the present study arise in material processing systems and different industries.