Anchimeric assistance by γ-substituents Z, Z=MeO, PhO, MeS or PhS, in reactions of the bromides (Me3Si)2(ZMe2Si)CSiMe2Br with AgBF4

The new organosilicon bromides (Me₃Si)₂(ZMe₂Si)CSiMe₂Br with Z=PhO or MeS have been prepared and new spectroscopic data obtained for the previously reported compounds with Z=H, F, Br, Me, Ph, MeO or PhS. Competitions between pairs of bromides for a deficiency of AgBF₄ in Et₂O, with the determination of the ratio of the fluoride products by ¹⁹F-NMR spectroscopy, have led to the following approximate relative reactivities of the bromides and so to the relative abilities of the γ-Z groups to provide anchimeric assistance to the leaving of Br⁻ in this reaction: Me, 1; Ph, 40; PhO, 3400; PhS, 5000; MeS, 7000; MeO, 54 000. In methanolysis in CH₂Cl₂, (Me₃Si)₂(MeOMe₂Si)CSiMe₂Cl has been found to be roughly 120 times as reactive as (Me₃Si)₂(PhOMe₂Si)CSiMe₂Cl. Combination of the results with previously available information suggests the following approximate order of ability of γ-groups Z to provide anchimeric assistance in reactions at the Si---X bonds in compounds (Me₃Si)₂(ZMe₂Si)CSiMe₂X: OCOMe>OMe>OCOCF₃>MeS>PhS, PhO>N₃, Cl>NCS>Ph>CH=CH₂>Me.     

A stannaethene with a planar environment of the tricoordinated tin and carbon atoms

Addition of the diarylstannylene R″₂Sn (R″ = 2−^tBu−4,5,6-Me₃C₆H) to the cryptodiborylcarbene (Me₃Si)₂C(B^tBu)₂C furnishes the stannaethene (Me₃Si)₂C(B^tBu)₂C=SnR″₂ (10). The X-ray structure analysis of 10 reveals a strictly planar environment of the tricoordinated tin and carbon atoms and a slight twisting of the Sn=C double bond.     

Preparation and reactions of some sterically hindered silanols, including [tris(trimethylsilyl)methyl]silanetriol

The silanol TsiSiMe₂OH (Tsi = (Me₃Si)₃C) has been made by hydrolysis of the iodide TsiSiMe₂I in H₂O/dioxane or H₂O/Me₂SO. It has been shown to react with some acid chlorides RCOCl (R=Me, Et, CICH₂ Ph, 4-O₂NC₆H₄, and 3,5- (O₂N)₂C₆H₃) and anhydrides (RCO)₂O (R = Me, CF₃, or Ph) to give the carboxylates TsiSiMe₂OCOR, and with SO₂Cl₂ to give TsiSiMe₂OSO₂Cl. The triol TsiSi(OH)₃ has been made by treatment of TsiSiH(OH)I with H₂O/Me₂SO at 150°C or with a mixture of aqueous AgClO₄ and an organic solvent. The triol has been shown to react with RCOCl (R = Me, Et, or Ph) or (RCO)₂O (R = Ph) to give the corresponding TsiSi(OCOR)₃, with (CF₃CO)₂O to give TsiSi(OH)₂(OCOCF₃), and with a mixture of Me₃SiCl and AgClO₄ in benzene or one of Me₃Sil and (Me₃Si)NH to give TsiSi(OSiMe₃)₃. The triol is unusually stable, but decomposes at its m.p. of 285–290°C.     

Titanium imido complexes containing 1,3,5-triazacyclohexane ligands

The syntheses of the 1,3,5-trimethyl- and tri-tert-butyl-1,3,5-triazacyclohexane-supported imido complexes [M(NR)(R′₃tach)Cl₂] (M = Ti or Zr (NMR only); R = Bu^t or 2,6-C₆H₃Prⁱ₂; R′ = Me or Bu^t) are reported, along with that of the thermally robust dibenzyl derivative [Ti(NBu^t)(Me₃tach)(CH₂Ph)₂]. The tert-butylimido ligand in [Ti(NBu^t)(Me₃tach)Cl₂] undergoes exchange with ArNH₂ (Ar = 4-C₆H₄Me or 2,6-C₆H₄Me or 2,6-C₆H₃Prⁱ₂) to form the corresponding arylimides [Ti(NAr)(Me₃tach)Cl₂]. The Me₃tach ring in [Ti(NR)(Me₃tach)Cl₂] undergoes slow exchange with Bu^t₃tach or Me₃tacn (1,4,7-trimethyl-1,4,7-triazacyclononane) to give the ring-exchanged products [Ti(NR)(Bu^t₃tach)Cl₂] and [Ti(NR)(Me₃tacn)Cl₂], respectively. The complexes [Ti(NR)(Me₃tach)X₂] (R = Bu^t or 2,6-C₆H₃Prⁱ₂; X = Cl or CH₂Ph) exhibit room-temperature dynamic NMR behaviour via an unusual trigonal twist of the facially coordinated Me₃tach ligand, and the activation parameters for these processes have been measured and are discussed. The X-ray structures of [Ti(NR)(Bu^t₃tach)Cl₂] (R = Bu^t or 2,6-C₆H₃Prⁱ₂) and [Ti(NBu^t)(Me₃tach)(X)₂] [X= Cl or CH₂Ph) are reported. Me₃tach and Bu^t₃tach = 1,3,5-trimethyl- and tri-tert-butyl-1,3,5-triazacyclohexane, respectively.     

A study of ortho- and para-siloxyanilines for the synthesis of mono-, bi-, and tetra-nuclear early transition metal–imido complexes

The siloxyanilines o-Me₃SiOC₆H₄NH₂ (1) and p-RMe₂SiOC₆H₄NH₂ (R=H (2); R=Me (3)), and their N-silylated derivatives p-Me₃SiOC₆H₄NHSiMe₃ (4) and p-Me₃SiOC₆H₄N(SiMe₃)₂ (5) have been prepared from ortho- or para-aminophenol and used in the synthesis of imido complexes. Thus, binuclear [{Ti(η⁵-C₅H₅)Cl}{μ-NC₆H₄(p-OSiMe₃)}]₂ (6) and mononuclear [TiCl₂{NC₆H₄(p-OSiMe₃)}(py)₃] (7) imido complexes have been obtained from the reaction of 3 and [Ti(η⁵-C₅H₅)Cl₃] or [TiCl₂(N^tBu)(py)₃], respectively. In contrast, the reaction of 1 with TiCl₄ and ^tBupy affords the titanocycle [TiCl₂{OC₆H₄(o-NH)---N,O}(^tBupy)₂] (8). Compound 5 has also been used to prepare the niobium imide complex [NbCl₃{NC₆H₄(p-OSiMe₃)}(MeCN)₂] (9), by its reaction with NbCl₅ in CH₃CN. These findings have been applied to the synthesis of polynuclear systems. Thus, chlorocarbosilane Si[CH₂CH₂CH₂Si(Me)₂Cl]₄ (CS–Cl) has been functionalized with the ortho- and para-aminophenoxy groups to give 10 and 11, respectively. The use of 11 has allowed the formation of the tetranuclear compound 12. Attempts to synthesize terminal imido titanium complexes from 10 and TiCl₄ in the presence of ^tBupy and Et₃N, give complex 8 and carbosilane CS–Cl.     

Studies on phenol permeation through supported liquid membranes containing functionalized polyorganosiloxanes

In this study, the functionalized, linear, hydrophobic fluid organosiloxane polymers, namely, methylhydrosiloxane–dimethylsiloxane copolymers supported on a polypropylene microporous flat sheet membrane (Celgard 2502 and 2402) have been tested as supported liquid membranes (SLMs) for phenol recovery from aqueous phases into a 0.1 M NaOH phase. The functionalized polymers include, Me₃SiO[MeSi(OR)O]_x[Me₂SiO]_ySiMe₃ (containing x = 15–18, 25–35 and 50–55 mol% of R, where R is –(CH₂)_nNMe₂ (n = 3 or 4 or 6) or –(CH₂)₂OEt pendent organofunctional groups. The functionalities, R, tested were derived from the commercially available 3-dimethylamino-1-propanol and 2-ethoxyethanol as well as newly synthesized 4-dimethylamino-1-butanol and 6-dimethylamino-1-hexanol which have been made for the purpose of this study.

The study showed that phenol permeation expressed as permeate flux through the membranes increases with the larger number of carbon spacers in the alkyl chain of the aminoalcohol pendent, larger porosity of the polypropylene support films, higher mol% of the methylhydrosiloxane portion functionalized and faster flow rates of both the feed and the receiving phases. Phenol permeation was enhanced significantly when the mol% of the methylhydrosiloxane portion was 50–55 or 25–35 with 6-dimethylamino-1-hexanol functionality supported on Celgard 2502.     

Anchimeric assistance in solvolysis of an organosilicon chloride and acetate

The compound (Me₃Si)₃CSiMeClI reacts with Hg(OAc)₂ in AcOH to give (Me₃Si)₂C(SiMe₂OAc)₂, under conditions in which the chloride (Me₃Si)₃CSiMe₂Cl is inert. Similarly, (Me₃Si)₂C(SiMe₂OAc)₂ reacts with CF₃CO₂H to give (Me₃Si)₂C[SiMe₂(O₂CCF₃)]₂ under conditions in which (Me₃Si)₃CSiMe₂OAc is inert. The results can be accounted for in terms of anchimeric assistance by the neighbouring acetoxy or trifluoroacetoxy group to the breaking of the Si---Cl or Si---OAc bond.     

The first 2,3-dihydro-1H-[1,2,4] triphosphole

Protonation of the lithium triphospha-cyclopentenyl salt Li (P₃C₂Bu^t₂RR′) (R=(Me₃Si)₂CH-, R′=Buⁿ) with HCl affords the new 2,3-dihydro-1H-[1,2,4] triphosphole P₃C₂Bu^t₂(H) (Buⁿ)CH(SiMe₃)₂ which has been structurally characterised as its [W(CO)₅] complex.     

Synthesis and electrochemical behaviour of the cyanamide-isocyanide complexes of rhenium, trans-[ReL(CNR)(Ph2PCH2CH2PPh2)2] ( L = NCNH2 or NCNH)

Reaction of trans-[ReCl(CNR)(dppe)₂] (R = Me (Ia) or ^tBu (Ib); DPPE = Ph₂PCH₂CH₂PPh₂) in CH₂Cl₂ with cynamide in the presence of TlBF₄ forms the new cynamide-isocyanide complexes trans-[Re(CNR)(NCNH₂)(dppe)₂][BF₄] (R = Me (IIa) or ^tBu (IIb)), which upon treatment by ^tBuOK or Et₃N give trans-[Re(NCNH)(CNR)(dppe)₂] (R = Me (IIIa) or ^tBu (IIIb)). The electrochemical behaviour of these species was studied by cyclic voltammetry and controlled potential electrolysis at a Pt electrode in an aprotic solvent, and cathodic reduction of II results in the formation of III.     

Synthesis and chemistry of the bis(trimethylsilyl)amido bis-tetrahydrofuranates of the group 2 metals magnesium, calcium, strontium and barium. X-ray crystal structures of Mg[N(SiMe3)2]2·2THF and related Mn[N(SiMe3)2]2·2THF

Transamination reactions utilizing the compound mercuric bis(trimethylsilyl)amide, Hg{N(SiMe₃)₂}₂, in tetrahydrofuran (THF), and the metals Na, Mg, Ca, Sr, Ba and Al have been investigated. Thus the THF solvated compounds Na[N(SiMe₃)₂]·THF and M[N(SiMe₃)₂]₂·2THF, M = Mg, Ca, Sr and Ba (1–4), have been prepared. The X-ray crystal structures of 1 and the related manganese compound Mn[N(SiMe₃)₂]₂·2THF (5) are reported. Interaction of the silylamides, 2–4, with a range of crown ethers apparently proceeded with elimination of silylamine, (Me₃Si)₂NH, and novel ring opening of the crown ethers, generating species containing a donor alkoxide ligand with a vinyl ether function, presumably, ---O(CH₂CH₂O)_nCH=CH₂ (n = 3−5). The silylamides 2–4 were also cleanly converted to the corresponding alkoxides (from ¹H NMR data) in reactions with stoichiometric quantities of 3-ethyl-3-pentanol.     

Preparation, structures, and haptotropic rearrangement of novel dinuclear ruthenium complexes, (μ2,η:η-guaiazulene)Ru2(CO)4(CNR)

Novel isonitrile derivatives of a diruthenium carbonyl complex, (μ₂,η³:η⁵-guaiazulene)Ru₂(CO)₅ (2), were synthesized by substitution of a CO ligand by an isonitrile, and were subjected to studies on thermal and photochemical haptotropic interconversion. Treatment of 2 (a 45:55 mixture of two haptotropic isomers, 2-A and 2-B) with RNC at room temperature resulted in coordination of RNC and alternation of the coordination mode of the guaiazulene ligand to form (μ₂,η¹:η⁵-guaiazulene)Ru₂(CO)₅(CNR), 5d–5f, [5d; R=^tBu, 5e; 2,4,6-Me₃C₆H₂, or 5f; 2,6-ⁱPr₂C₆H₃] in moderate to good yields. Thermal dissociation of a CO ligand from 5 at 60 °C resulted in quantitative formation of a desirable isonitrile analogue of 2, (μ₂,η³:η⁵-guaiazulene)Ru₂(CO)₄(CNR), 4d–4f, [4d; R=^tBu, 4e; 2,4,6-Me₃C₆H₂, or 4f; 2,6-ⁱPr₂C₆H₃], as a 1:1 mixture of the two haptotropic isomers. A direct synthetic route from 2 to 4d–4f was alternatively discovered; treatment of 2 with one equivalent of RNC at 60 °C gave 4d–4f in moderate yields. All of the new compounds were characterized by spectroscopy, and structures of 5d (R=^tBu) and 4d-A (R=^tBu) were determined by crystallography. Thermal and photochemical interconversion between the two haptotropic isomers of 4d–4f revealed that the isomer ratios in the thermal equilibrium and in the photostatic state were in the range of 48:52–54:46.     

Synthesis and structural behavior of the P-functional organotin chlorides [Ph2P(CH2)3]2SnCl2, Ph2P(CH2)3SnCl2Me, and Ph2P(CH2)nSnCl3 (n=2, 3)

The P-functional organotin dichloride [Ph₂P(CH₂)₃]₂SnCl₂ (3) is synthesized by reaction of Ph₂P(CH₂)₃MgCl with SnCl₄ independently of the molar ratio of the starting compounds. The corresponding organotin trichlorides Ph₂P(CH₂)_nSnCl₂R (4: n=2, R=Cl; 5: n=3, R=Cl; 6: n=3, R=Me) are formed in a cleavage reaction of Ph₂P(CH₂)_nSnCy₃ (n=2, 3) with SnCl₄ or MeSnCl₃, respectively. The main features of the crystal structures of 3–6 are both intra- and intermolecular PSn coordinations and the existence of intermolecular Sn---ClSn bridges. For further characterization of the title compounds, the adducts 4(Ph₃PO)₂ (7) and 5(Ph₃PO) (8), as well as the P-oxides and P-sulfides of 3–6 (9–15), are synthesized. The results of crystal structure analyses of 7, 11, 12, and 14 are reported. The structures of 9–15 are characterized by intramolecular P=XSn interactions (X=O, S). A first insight into the structural behavior of the compounds 3–15 in solution is discussed on the basis of multinuclear NMR data.     

Reactions of the sterically hindered organosilicon diol (Me3Si)2C(SiMe2OH)2 and some of its derivatives

The diol R₂C(SiMe₂OH)₂ (R = Me₃Si) has been shown to react with: SO₂Cl₂ to give R₂ Me₂; SOCl₂ to give R₂C(SiMe₂Cl)₂; Me₃SiI or Me₃SiCl to give R₂C(SiMe₂OSiMe₃)₂; R′COCl; (R′ = Me or CF₃) to give R₂C(SiMe₂O₂CR′)-(SiMe₂Cl); (R′CO)₂O (R′ = Me or CF₃ to give R₂C(SiMe₂O₂CR′)₂; with MeOH containing acid to give R₂C(SiMe₂OMe)₂; with neutral MeOH to give R₂C-(SiMe₂OMe)₂ and probably R₂ Me₂; MeLi to give R₂C(SiMe₂OLi)₂ (and the latter to react with PhMeSiF₂ to give R₂ Me₂). The diacetate R₂C(SiMe₂O₂CMe)₂ reacts with CsF in MeCN to give R₂C(SiMe₂F)₂; it does not react with NaN₃ or KSCN in MeCN, but the bis(trifluoroacetate) reacts with these salts with KOCN to give R₂C(SiMe₂X)₂ (X = N₃, NCS, NCO).     

Group 4 metallacarboranes of constrained geometries derived from B(cage)- and C(cage)-silylamido-substituted carborane ligands: a synthetic and structural investigation

The reactions of RNHSi(Me)₂Cl (1, R=t-Bu; 2, R=2,6-(Me₂CH)₂C₆H₃) with the carborane ligands, nido-1-Na(C₄H₈O)-2,3-(SiMe₃)₂-2,3-C₂B₄H₅ (3) and Li[closo-1-R′-1,2-C₂B₁₀H₁₀] (4), produced two kinds of neutral ligand precursors, nido-5-[Si(Me)₂N(H)R]-2,3-(SiMe₃)₂-2,3-C₂B₄H₅, (5, R=t-Bu) and closo-1-R′-2-[Si(Me)₂N(H)R]-1,2-C₂B₁₀H₁₀ (6, R=t-Bu, R′=Ph; 7, R=2,6-(Me₂CH)₂C₆H₃, R′=H), in 85, 92, and 95% yields, respectively. Treatment of closo-2-[Si(Me)₂NH(2,6-(Me₂CH)₂C₆H₃)]-1,2-C₂B₁₀H₁₁ (7) with three equivalents of freshly cut sodium metal in the presence of naphthalene produced the corresponding cage-opened sodium salt of the “carbons apart” carborane trianion, [nido-3-{Si(Me)₂N(2,6-(Me₂CH)₂C₆H₃)}-1,3-C₂B₁₀H₁₁]³⁻ (8) in almost quantitative yield. The reaction of the trianion, 8, with anhydrous MCl₄ (M=Ti and Zr) in 1:1 molar ratio in dry tetrahydrofuran (THF) at −78 °C, resulted in the formation of the corresponding half-sandwich neutral d⁰-metallacarborane, closo-1-M[(Cl)(THF)_n]-2-[1′-η¹σ-N(2,6-(Me₂CH)₂C₆H₃)(Me)₂Si]-2,4-η⁶-C₂B₁₀H₁₁ (M=Ti (9), n=0; M=Zr (10), n=1) in 47 and 36% yields, respectively. All compounds were characterized by elemental analysis, ¹H-, ¹¹B-, and ¹³C-NMR spectra and IR spectra. The carborane ligand, 7, was also characterized by single crystal X-ray diffraction. Compound 7 crystallizes in the monoclinic space group P2₁/c with a=8.2357(19) Å, b=28.686(7) Å, c=9.921(2) Å; β=93.482(4)°; V=2339.5(9) ų, and Z=4. The final refinements of 7 converged at R=0.0736; wR=0.1494; GOF=1.372 for observed reflections.     

(Dimethylaminoethyl)cyclopentadienyl-liganden in der chemie von gruppe-13-elementen (Al, Ga, In

The synthesis of cyclopentadienyl complexes containing polydentate C₅R₄(CH₂CH₂NMe₂) ligands (R = H, Me) and Group 13 elements (Al, Ga, In) is described. The compounds (C₅Me₄CH₂CH₂NMe₂) AlX₂ (X = Me, Cl, Br, I), (C₅Me₄CH₂CH₂NMe₂)MCl ₂ (M = Ga, In), (C₅H₄CH₂CH₂NMe₂)AlX₂ (X = H, Me, Et, Cl), (C₅H₄CH_2- CH₂NMe₂)GaCl₂,and (C₅H₄CH₂CH₂NMe₂)InMe₂ are obtained by three different procedures. All compounds that have been characterized, so far, by X-ray diffraction studies show an additional intramolecular coordination of the nitrogen atom in the side chain. Monomeric structures and sufficient volatilities make them potential candidates for MOCVD processes.     

Group 14 chalcogenides featuring a bicyclo[3.3.0]octane skeleton

Reactions of mixtures of Cl₂MeSiSiMeCl₂ (1) and Me₂MCl₂ (M=Si, Ge, Sn) with either H₂S/NEt₃ or Li₂E (E=Se, Te) yielded the bicyclo[3.3.0]octanes Me₂M(E)₂Si₂Me₂(E)₂MMe₂. A carbon containing analog, (CH₂)₅C(S)₂Si₂Me₂(S)₂C(CH₂)₅, was prepared from 1 and (CH₂)₅C(SH)₂. Crystal structures of three of these compounds were determined and the observed conformations of the bicyclo[3.3.0]octane skeletons compared with results of density functional theory calculations. Another class of silchalcogenides featuring a bicyclo[3.3.0]octane skeleton, E(Me₂Si)₂Si₂Me₂(SiMe₂)₂E, was formed from the doubly branched hexasilane (ClMe₂Si)₂Si₂Me₂(SiMe₂Cl)₂ and H₂S/NEt₃ or Li₂E. All products were characterized by multinuclear NMR (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹¹⁹Sn, and ¹²⁵Te).     

ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.     

New phosphabenzenes by [4 + 2] cycloaddition of stannoles to 1-phospha-1-alkynes — determination of signs of coupling constants [J(P, C), J(P, H), J(P, Si), J(Sn, P)]

Stannoles bearing dialkylboryl groups in 3-position react with 1-phospha-1-alkynes P≡C---^tBu (1) and P≡C---CH₂^tBu (2) by [4 + 2] cycloaddition and elimination of stannylene to give phosphabenzenes in high yield. The stannylenes oligomerise to give [R¹₂Sn]_n with n ≥ 7 (R --- Me, Et, -(CH₂)₅₋ or, in the case of R¹ = ^tBu, react with the stannole itself. All phosphabenzenes are characterized by their consistent sets of NMR data. The absolute signs of the coupling constants ⁿJ(³¹P, ¹H), ⁿJ(³¹P, ¹³C), ²J(³¹P, ²⁹Si) and ²J(¹¹⁹Sn, ³¹P) were determined by appropriate ID and 2D NMR experiments.     

Synthesis of methyltrioxorhenium(VII) arylamine complexes and mono- and bis(ortho)-chelated arylaminorhenium(VII) trioxides

From the reaction of MeReO₃ with the neutral arylamine C₆H₅CH₂NMe₂ and the aryldiamine C₆H₄(CH₂NMe₂)₂−1,3, have been isolated in good yields the 1/1 adduct complex [MeReO₃ · C₆H₅CH₂NMe₂], 1, and the 2/1 adduct complex [(MeReO₃)₂ · C₆H₄(CH₂NMe₂)₂− 1,3], 2, respectively. The X-ray molecular structure of 2 shows that both rhenium centres have a trigonal bipyramidal geometry and in the axial positions of each rhenium centre are one of the NMe₂ units of the aryldiamine ligand and a methyl group. The mono(ortho)-chelated arylaminorhenium trioxide complex [ReO₃(C₆H₄CH₂NMe₂−2], 3, can be synthesized by a transmetallation reaction of ClReO₃ with [ZnC₆H₄CH₂NMe₂−2₂] in a 2:1 molar ratio. In a similar way the bis(ortho)-chelated arylaminorhenium trioxide complex [ReO₃C₆H₃(CH₂NMe₂)₂−2,6], 4, can be synthesized by addition of a mixture of [Li₂C₆H₃(CH₂NMe₂)₂−2,6₂] and ZnCl₂ to ClReO₃. Complexes 3 and 4 have been isolated as white solids in 66% and 81% yields respectively. The rhenium centre in complex 4 has a bicapped tetrahedral geometry in which the monoanionic C₆H₃(CH₂NMe₂)₂−2,6⁻ ligand is pseudo-facially bonded with a characteristic N1-Re-N2 angle of 107.7(3)°, a Re-C_ipso bond length of 2.112(11) Å and Re-N1 and Re-N2 bond lengths of 2.518(9) Å and 2.480(8) Å respectively.     

Synthesis and properties of alkyldicyclopentadienyl-vanadium(III) compounds

The compounds Cp₂VR (R = CH₃, C₂H₅, n-C₃H₇, n-C₄H₉, n-C₅H₁₁, CH₂C(CH₃)₃ or CH₂Si(CH₃)₃) have been prepared from Cp₂ VCl and RMgX in n-pentane. The air-sensitive compounds are stable at room temperature, but decompose between 65 and 138°C. The thermal stability decreases in the order R = CH₃ CH₂Si(CH₃)₃ > C₂H₅ > CH₂C(CH₃)₃ > n-C₅H₁₁ > n-C₄H₉ > n-C₃H₇. Compounds with R = i-C₃H₇ or t-C₄H₉ could not be obtained.