Syntheses and evaluation of novel biodegradable amino acid based anhydride polymer resins and composites

A novel synthetic biodegradable oligomer based upon methacrylated aminocaproyl maleamic acid (MACMA), was synthesized and characterized. Injectable and in situ crosslinkable polymer networks were formulated by copolymerization of MACMA with triethyleneglycol dimethacrylate (TEGDMA). In addition, composites composed of MACMA, TEGDMA and beta-tricalcium phosphate (β-TCP) were prepared. The networks and composites were initiated by photo- and redox-polymerization, respectively. The initial compressive (CS) and diametral tensile strengths (DTS) of these materials were determined and used to evaluate the effects of MACMA/TEGDMA ratios on the degradation behavior of the materials. The neat resin networks exhibited initial CS values ranging from 6.7 to 284.2 MPa and the composites demonstrated initial DTS values ranging from 2.8 to 20.8 MPa and CS values ranging from 19.1 to 119.5 MPa. During the course of degradation the polymer neat resins lost 51%, 69% and 61% of their initial CS after 3 weeks for the MACMA/TEGDMA ratios at 25/75, 50/50 and 75/25, respectively. The resin with the MACMA/TEGDMA ratio of 75/25 completely degraded after 6 months. The composite with the MACMA/TEGDMA ratio of 25/75 exhibited a significant increase in CS after an initial decrease for 7 days and then lost 57% of its initial CS after 3 months. The composite composed of poly(MACMA) homopolymer showed a complete degradation after 21 days.     

Syntheses of biodegradable polymer networks based on polycaprolactone and glutamic acid

Biodegradable trifunctional oligomer was synthesized from polycaprolactone and glutamic acid and characterized by Fourier‐transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopies. Injectable and in situ crosslinkable polymer networks were fabricated by the copolymerization of oligomer with triethylene glycol dimethacrylate (TEGDMA) and used to evaluate the initial compressive strengths, viscosities, shrinkages, thermal stabilities, and biodegradabilities in the forms of polymer network neat resin and their composites with β‐tricalcium phosphate. The initial compressive strengths (CS) values of neat resins ranged from 9.54 to 187.6 MPa. Both neat resins and composites had polymerization shrinkage ranging from 0% to 11.7%, which increased with increasing of TEGDMA contents in resin. Moreover, in polymer composite resins, shrinkage values decreased with increasing filler level from 0% to 4.6%, and exothermic evolution values decreased from 33.5°C to 29.7°C as increasing filler level. The composite with the formulation of (polycaprolactone)‐glutamate triacrylate (PCLGTA)/TEGDMA (25/75) and powder/liquid (P/L) ratio of 1.0 exhibited the highest exothermal and lowest shrinkage values. The increase of oligomer in the formulation led to an increase in viscosity.     

Synthesis and formulation of vinyl-containing polyacids for improved light-cured glass-ionomer cements

Vinyl-containing poly(acrylic acid-co-itaconic acid) copolymers were synthesized and used to formulate light-curable cements containing reactive glass fillers (Fuji II LC). The conditions for light curing were studied and optimized. Effects of molecular weight (MW), grafting ratio, comonomer, liquid composition, powder/liquid (P/L) ratio, glass powder and aging were evaluated. The results show that the vinyl-containing glass-ionomer cements (GICs) prepared in this study exhibit higher compressive strength (CS, 225.6 MPa), diametral tensile strength (DTS, 28.4 MPa) and much higher flexural strength (FS, 116.4 MPa), as compared to commercial Fuji II LC GIC (186.6 in CS, 19.1 in DTS and 57.1 in FS). The optimal light-exposure time was found to be around 10 min, and concentrations of CQ and DC were 0.5% (by weight) and 1.0%, respectively. Effects of MW, grafting ratio, P/L ratio and content of polymer in the liquid formulation were significant. The highest strengths were found for the optimal formulations where the MW was 15,000 (weight average), grafting ratio 25 mol%, P/L ratio 2.7 and liquid composition 50:20:30. During aging, the cement showed an increase of strength over the first week and then no change for a month. SEM analysis suggests that more integrated microstructures and smaller glass particles can lead to higher FS and higher polymer content in GICs leads to tough fracture surface and plastic deformation.     

Mechanical,thermal and morphological properties of poly(ε‐caprolactone)/zein blends

Blends of poly(ε‐caprolactone) (PCL) with zein (PCL/zein) in different proportions (100/0, 75/25, 50/50, 25/75 and 0/100 wt% containing 5 wt% glycerol) were compared based on their mechanical properties (tensile strength, elongation at break, and Young's modulus), and on their thermal properties, the latter determined by thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA). The morphology of the materials was studied by scanning electron microscopy (SEM). Blends of PCL/zein showed reduced tensile strength and elongation at break, but increased Young's modulus compared to the pure polymers, in agreement with the DMTA and SEM results. These findings indicated that PCL and zein were incompatible. TGA showed that the thermal stability was enhanced by the addition of zein to PCL, whereas SEM showed a poor interfacial interaction between the polymers. Copyright © 2004 John Wiley & Sons, Ltd.     

聚ε-己内酯/聚吡咯电纺膜的制备与性能

以吡咯(Py)和聚ε-己内酯(PCL)为原料、氯仿为溶剂,并掺杂一定量的十二烷基硫酸钠制备电纺膜,利用三氯化铁的氧化作用原位生成聚吡咯(PPy).对所得到的PCL/PPy电纺膜用红外光谱进行表征,在扫描电镜和透射电镜下观察纤维形貌,并测定力学性能和体积电阻率.结果表明,所生成的PPy以纳米粒子形式附着在电纺纤维表面,随着Py相对于PCL的质量百分含量由0增加到20%,PCL/PPy电纺膜的纤维直径从(730±341)nm逐渐下降至(325±84)nm;膜的拉伸模量和拉伸强度由不含Py的(25.7±0.8)MPa和(2.48±0.14)MPa分别增加至含有20%Py的(48.4±7.6)MPa和(5.05±0.59)MPa,断裂伸长率由(129±27)%下降至(86.2±9.1)%;体积电阻率降低了2～3个数量级.该PCL/PPy电纺纤维膜以期可作为电活性材料用于功能或生物医用领域.     

Studies on poly(ε‐caprolactone)/thiodiphenol blends: The specific interaction and the thermal and dynamic mechanical properties

The effects of several low molecular weight compounds with hydroxyl groups on the physical properties of poly(ε‐caprolactone) (PCL) were investigated by Fourier transform infrared (FTIR) spectroscopy and high‐resolution solid‐state ¹³C NMR. PCL and 4,4′‐thiodiphenol (TDP) interact through strong intermolecular hydrogen bonds and form hydrogen‐bonded networks in the blends at an appropriate TDP content. The thermal and dynamic mechanical properties of PCL/TDP blends were investigated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis, respectively. The melting point of PCL decreased, whereas both the glass‐transition temperature and the loss tangent tan δ of the blend increased with an increase in TDP content. The addition of 40 wt % TDP changed PCL from a semicrystalline polymer in the pure state to a fully amorphous elastomer. The molecules of TDP lost their crystallizability in the blends with TDP contents not greater than 40 wt %. In addition to TDP, three other PCL blend systems with low molecular weight additives containing two hydroxyl groups, 1,4‐dihydroxybenzene, 1,4‐di‐(2‐hydroxyethoxy) benzene, and 1,6‐hexanediol, were also investigated with FTIR and DSC, and the effects of the chemical structure of the additives on the morphology and thermal properties are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1848–1859, 2000     

Viscoelastic behavior and phase domain formation in Millar interpenetrating polymer networks of polystyrene

Millar-type interpenetrating polymer networks (IPNs) are composed of two identical networks. In the present case Millar IPNs of polystyrene/polystyrene were prepared where the crosslinker levels of the two networks differed by a factor of 10. Polymer network I contained 0.4% divinylbenzene (DVB) and polymer network II contained 4% DVB, the polymers having the following weight proportions: 75/25, 50/50, and 25/75. A single polystyrene network containing 2.2% DVB was synthesized for comparison with the 50/50 Millar IPN, both containing the same average amount of crosslinker. The creep behavior of the Millar IPNs was found to be dominated by polymer network I, as were the rubbery moduli and swelling behavior in toluene. These results suggested that polymer I domains are more continuous in space and polymer II domains are less continuous. The Donatelli equation predicted polymer II domain sizes of 60 Å to 100 Å for the Millar IPNs. Electron micrographs of specimens containing 1% isoprene in polymer II offered visual evidence for the segregation of polymer II domains from polymer I, and showed that the polymer II domains were, in fact, less continuous. Polymer II domains varied from about 50 to 100 Å in size, as predicted. These results have implications for gelation processes in general.     

SYNTHESIS OF POLY(ACRYLIC ACID-CO-ITACONIC ACID) IN CARBON DIOXIDE–METHANOL MIXTURES

ABSTRACT

High fluidity solvents, such as supercritical fluids, have several advantages over traditional solvents as polymerization media, such as offering a more environmentally-friendly reaction media, providing increased reaction rates, and simplifying the separation and purification of polymers. In this study, a traditional glass-ionomer polymer, poly(acrylic acid-co-itaconic acid) (PAA/IA) was synthesized by using mixtures of CO₂ and methanol as the reaction solvent and was characterized by ¹H-NMR, FT-IR, GPC, and viscometry. The mechanical and working properties of the glass-ionomer cements, prepared by mixing aqueous solutions of the polymers with Fuji II glass powder, were evaluated for compressive strength (CS), diametral tensile strength (DTS) and flexural strength (FS), as well as setting time and working time. The results showed that the polymerization reaction in CO₂/methanol mixtures was faster and had higher conversion than the polymerization reaction in water. The glass-ionomer formulations made from the copolymer prepared under SC conditions showed higher CS, comparable FS and DTS compared with those made from the same polymer prepared in water. Both of the synthesized copolymers had significantly higher CS and FS than Fuji II. The working properties of PAA/IA made in CO₂/methanol met the requirement of ANSI/ADA No. 96.     

Materials for peripheral nerve regeneration

Recent efforts in scientific research in the field of peripheral nerve regeneration have been directed towards the development of artificial nerve guides. We have studied various materials with the aim of obtaining a biocompatible and biodegradable two layer guide for nerve repair. The candidate materials for use as an external layer for the nerve guides were poly(caprolactone) (PCL), a biosynthetic blend between PCL and chitosan (CS) and a synthesised poly(ester-urethane) (PU). Blending PCL, which is a biocompatible synthetic polymer, with a natural polymer enhanced the system biocompatibility and biomimetics, fastened the degradation rates and reduced the production costs. Various novel block poly(ester-urethane)s are being synthesised by our group with tailored properties for specific tissue engineering applications. One of these poly(ester-urethane)s, based on a low molecular weight poly(caprolactone) as the macrodiol, cycloesandimethanol as the chain extender and hexamethylene diisocyanate as the chain linker, was investigated for the production of melt extruded nerve guides. We studied natural polymers such as gelatin (G), poly(L-lysine) (PL) and blends between chitosan and gelatin (CS/G) as internal coatings for nerve guides. In vitro and in vivo tests were performed on PCL guides internally coated either with G or PL to determine the differences in the quality of nerve regeneration associated with the type of adhesion protein. CS/G natural blends combined the good cell adhesion properties of the protein phase with the ability to promote nerve regeneration of the polysaccharide phase. Natural blends were crosslinked both by physical and chemical crosslinking methods. In vitro neuroblast adhesion tests were performed on CS/G film samples, PCL/CS and PU guides internally coated with G to evaluate the ability of such materials towards nerve repair.     

Enhanced mechanical property of chitosan via blending with functional poly(ε-caprolactone)

Blends of chitosan and poly(ε-caprolactone-co-2-oxepane-1,5-dione) (PCO) were fabricated by solvent casting technique using 77% acetic acid as the cosolvent. The interactions between chitosan and PCO were analyzed by Fourier transform infrared spectroscopy, nuclear magnetic resonance, and differential scanning calorimetry. The miscibility became poorer with increase of PCO from 50% to 75%, which was supported by the Flory–Huggins interaction parameter and crystallinity of PCO. According to X-ray pattern, crystallinity of CS became weaker when PCO content was improved. Results indicated that there existed stronger interactions in comparison with PCL/CS blends. Therefore, the addition of functional polyester PCO made the brittle chitosan ductile. The elongation was significantly prolonged to 21.60 ± 4.92% with the break stress maintaining about 32 MPa, better than that of PCL blends. The degradation behavior showed slower degradation rate compared with pure CS and the morphology was illustrated by scanning electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Crystallization Behavior of Poly(3-hydroxybutyrate) (PHB), Poly(ε-caprolactone) (PCL) and Their Blend (50:50 wt.%) Studied by 2D FT-IR Correlation Spectroscopy

Variable-temperature FT-IR spectra of poly(3-hydroxybutyrate) (PHB), poly(ε-caprolactone) (PCL) and a PHB/PCL (50:50 wt.%) blend were analyzed by two-dimensional correlation spectroscopy (2DCOS). For this purpose the ν(CO) region was employed to characterize in some detail the crystallization behavior of the investigated polymer systems during cooling from the melt. The asynchronous 2D correlation spectra clearly captured the existence of three components in the crystallinity-sensitive region of the CO stretching mode for PHB and PCL, respectively: a well-ordered, an inter-mediate and a less ordered crystalline state. Furthermore, by 2DCOS application a sequential order of the observed structural changes could be proposed for the whole temperature range during the crystallization of both polymers. In the case of the PHB/PCL (50:50 wt.%) polymer blend, we have split up the spectral data set in the sub-sets between 200–120 °C and 70–30 °C for a more detailed 2DCOS analysis. In this way we could separate the crystallization process of PHB and PCL in the polymer blend.     

Synthesis,characterization, and thermal degradation mechanism of fast biodegradable PPSu/PCL copolymers

Poly(propylene succinate)/poly(ε‐caprolactone) (PPSu/PCL) 25/75, 50/50, and 75/25 w/w copolymers were prepared using a combination of polycondensation and ring opening polymerization. The randomness of copolymers was characterized using ¹H NMR and ¹³C NMR spectroscopy. From molecular weights and DSC measurements it was observed that the molecular weight decreased with increasing the wt % content of PPSu, while the copolymers containing 50 and 75 wt % PPSu were completely amorphous. Enzymatic hydrolysis revealed that biodegradation rate was much enhanced compared with that of neat PCL and increased by increasing the PPSu content. From TGA analysis it was also found that the PPSu/PCL copolymers had similar thermal decomposition behaviour with the pure polyesters and exhibited their maximum decomposition rates at temperatures 400–420 °C. Two different mechanisms, which follow each other, were used to adequately describe their decomposition kinetics. The first one corresponded to the first stage taking place at 280–365 °C, where small mass loss was recorded and activation energies ranged between 94 and 156 kJ/mol. The second one took place at 370–460 °C and corresponded to the stage where the main polyester mass was decomposed. The activation energies for this stage ranged between 200 and 240 kJ/mol. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5076–5090, 2007     

Fabrication of chitosan/collagen/hydroxyapatite scaffolds with encapsulated Cissus quadrangularis extract

Here, we demonstrated the fabrication of a composite scaffold (chitosan [CS], collagen [Col], and hydroxyapatite [HA]) with the incorporation of encapsulated Cissus quadrangularis (CQ) extract for tissue engineering applications. First, the crude extract of CQ loaded nanoparticles were synthesized via double emulsion technique using polycaprolactone (PCL) and polyvinyl alcohol (PVA) as oil and aqueous phases, respectively. Both PCL (20, 40, and 80 mg/mL) and PVA (0.5%, 1%, and 3% w/v) concentrations were varied to determine the optimum concentrations for CQ‐loaded nanoparticle preparation. The CQ‐loaded PCL nanoparticles (CQ‐PCL NPs), prepared with 20 mg/mL PCL and 0.5% (w/v) PVA, exhibited the smallest size of 334.22 ± 43.21 nm with 95.54 ± 1.49% encapsulation efficiency. Then, the CQ‐PCL NPs were incorporated into the CS/Col/HA scaffolds. These scaffolds were also studied for their ultrastructure, pore sizes, chemical composition, compressive modulus, water swelling, weight loss, and biocompatibility. The results showed that the addition of CQ‐PCL NPs into the scaffolds did not dramatically alter the ultrastructure and properties of the scaffolds, compared to CS/Col/HA scaffolds alone. However, incorporation of CQ‐PCL NPs in the scaffolds improved the release profile of CQ by preventing the initial burst release and prolonging the release rate of CQ. In addition, the CQ‐PCL NPs‐loaded CS/Col/HA scaffolds supported the attachment and proliferation of MC3T3‐E1 osteoblast cells.     

The electrospun poly(ε‐caprolactone)/fluoridated hydroxyapatite nanocomposite for bone tissue engineering

Biodegradable cell‐incorporated scaffolds can guide the regeneration process of bone defects such as physiological resorption, tooth loss, and trauma which medically, socially, and economically hurt patients. Here, 0, 5, 10, and 15 wt% fluoridated hydroxyapatite (FHA) nanoparticles containing 25 wt% F^? and 75 wt% OH^? were incorporated into poly(ε‐caprolactone) (PCL) matrix to produce PCL/FHA nanocomposite scaffolds using electrospinning method. Then, scanning electron microscopy (SEM), X‐ray diffraction (XRD) pattern, and Fourier transform infrared spectroscopy (FTIR) were used to evaluate the morphology, phase structure, and functional groups of prepared electrospun scaffolds, respectively. Furthermore, the tensile strength and elastic modulus of electrospun scaffolds were investigated using the tensile test. Moreover, the biodegradation behavior of electrospun PCL/FHA scaffolds was studied by the evaluation of weight loss of mats and the alternation of pH in phosphate buffer saline (PBS) up to 30 days of incubation. Then, the biocompatibility of prepared mats was investigated by culturing MG‐63 osteoblast cell line and performing MTT assay. In addition, the adhesion of osteoblast cells on prepared electrospun scaffolds was studied using their SEM images. Results revealed that the fiber diameter of prepared electrospun PCL/FHA scaffolds alters between 700 and 900 nm. The mechanical assay illustrated the mat with 10 wt% FHA nanoparticles revealed the highest tensile strength and elastic modulus. The weight loss alternation of mats determined around 1% to 8% after 30 days of incubation. The biocompatibility and cell adhesion of mats improved by increasing the amounts of FHA nanoparticles.     

Open-pore biodegradable foams prepared via gas foaming and microparticulate templating

Open-pore biodegradable foams with controlled porous architectures were prepared by combining gas foaming and microparticulate templating. Microparticulate composites of poly(epsilon-caprolactone) (PCL) and micrometric sodium chloride particles (NaCl), in concentrations ranging from 70/30 to 20/80 wt.-% of PCL/NaCl were melt-mixed and gas-foamed using carbon dioxide as physical blowing agent. The effects of microparticle concentration, foaming temperature, and pressure drop rate on foam microstructure were surveyed and related to the viscoelastic properties of the polymer/microparticle composite melt. Results showed that foams with open-pore networks can be obtained and that porosity, pore size, and interconnectivity may be finely modulated by optimizing the processing parameters. Furthermore, the ability to obtain a spatial gradient of porosity embossed within the three-dimensional polymer structure was exploited by using a heterogeneous microparticle filling. Results indicated that by foaming composites with microparticle concentration gradients, it was also possible to control the porosity and pore-size spatial distribution of the open-pore PCL foams.     

Michael addition for crosslinking of poly(caprolactone)s

Poly(caprolactone) (PCL) networks have received significant attention in the literature because of many emerging potential applications as biodegradable materials. In this study, the Michael addition reaction was used for the first time to synthesize biodegradable networks using crosslinking of acetoacetate‐functionalized PCL (PCL bisAcAc) oligomers with neopentyl glycol diacrylate. Hydroxyl‐terminated PCL telechelic oligomers with number‐average molecular weights ranging from 1000 to 4000 g/mol were quantitatively functionalized with acetoacetate groups using transacetoacetylation. In addition to difunctional PCL oligomers, hydroxyl‐terminated trifunctional star‐shaped PCL oligomers were functionalized with acetoacetate groups. Derivatization of the terminal hydroxyl groups with acetoacetate groups was confirmed using FTIR spectroscopy, ¹H NMR spectroscopy, mass spectrometry, and base titration of hydroxyl end groups. PCL bisAcAc precursors were reacted with neopentyl glycol diacrylate in the presence of an organic base at room temperature. The crosslinking reactions yielded networks with high gel contents (>85%). The thermomechanical properties of the networks were analyzed to investigate the influence of molecular weight between crosslink points. The glass transition and the extent of crystallinity of the PCL networks were dependent on the molecular weight of the PCL segment. Dynamic mechanical analysis indicated that the plateau modulus of the networks was dependent on the molecular weight of PCL, which was related to the crosslink density of the networks. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5437–5447, 2009     

Photocurable biodegradable poly(ɛ-caprolactone)/poly(ethylene glycol) multiblock copolymers showing shape-memory properties

Biodegradable multiblock copolymers were synthesized by a polycondensation of poly(ɛ-caprolactone) (PCL) diols of molecular weight (MW)=3,000 and poly(ethylene glycol)s (PEG) of MW=3,000 with 4,4′-(adipoyldioxy)dicinnamic acid (CAC) dichloride as a chain extender in diphenyl ether at 180 °C for 2 h, and were characterized by GPC, ¹H-NMR, FTIR, UV, DSC, and WAXS. These photosensitive copolymers were irradiated by a 400-W high-pressure mercury lamp (λ>280 nm) from 5–60 min to form a network structure. The gel contents increased with irradiation time, and attained ca. 90% after 60 min for all copolymers. The degree of swelling in a distilled water at ambient temperature, and the rate of degradation in a phosphate buffer solution (pH 7.2) at 37 °C increased with increasing PEG components. The shape-memory tests were performed by a cyclic thermomechanical experiments for the photocured CAC/PCL/PEG (75/25) films. The film with a gel content of 57% showed the best shape-memory property with strain fixity rate of 100% and strain recovery rate of 88%.     

Thermal Degradation of Poly(ε-caprolactone), Poly(L-lactic acid) and their Blends with Poly(3-hydroxy-butyrate) Studied by TGA/FT-IR Spectroscopy

Summary: The thermal degradation behavior of poly(ε-caprolactone) (PCL) and poly(L-lactic acid) (PLA) have been studied in different environment. It was found that these polymers undergo completely different degradation processes in nitrogen and oxygen atmosphere. In oxygen environment PCL and PLA mainly decompose to CO₂, CO, water and short-chain acids. In nitrogen atmosphere PCL releases 5-hexenioc acid, CO₂, CO and ε-caprolactone, whereas PLA decomposes to acetaldehyde, CO₂, CO and lactide. The polymer blends of poly(3-hydroxybutyrate) (PHB) with PCL and PLA decompose similar to the individual homopolymers with crotonic acid as the initial decomposition product of PHB.     

Preparation and characterization of microspheres based on blend of poly(lactic acid) and poly(ɛ-caprolactone) with poly(vinyl alcohol) as emulsifier

In this paper, microspheres were prepared by oil-in-water (o/w) emulsion solvent evaporation method. Biodegradable polymer such as blend of poly (lactic acid) (PLA) and poly(?-caprolactone) (PCL) with certain compositions and characteristics was used to prepare the microspheres with poly(vinyl alcohol) (PVA) as an emulsifier. This study observed the microspheres particle’s size distribution at various concentrations of PVA (1%, 1.5%, 2%, and 2.5% PVA). The PVA volume variations effects during the process (50, 100, 150, 200, and 250 mL) were also observed. The blend of PLA and PCL is formed only by physical interaction between them. This can be seen from the FTIR spectrum which shows both PLA and PCL component. The microspheres physical size and appearance were observed by optical microscope (MO). The overall results of this study showed that the formula which used 50–150 mL of 2.5% polyvinyl alcohol produced the microspheres with the most uniform size distribution.     

Poly(caprolactone triol) as plasticizer agent for cellulose acetate films: influence of the preparation procedure and plasticizer content on the physico‐chemical properties

The influence of the plasticizer content and film preparation procedure on the morphology, density, thermal and mechanical properties of cellulose acetate (CA) films plasticized with poly‐(caprolactone triol) (PCL‐T), were studied. Differential scanning calorimetry (DSC), thermal mechanical analysis (TMA), scanning electron microscopy (SEM), wide‐angle X‐ray diffraction (WAXD) and infrared spectroscopy (FT‐IR) techniques were used. The films were prepared by dry‐casting CA and CA/PCL‐T in acetone or acetone/water solutions, which produced transparent and opaque films, respectively. In contrast to the transparent films, which were dense, the opaque films presented a porous morphology. However, the presence of PCL‐T reduced the opaque film porosity, increasing, in consequence, its bulk density. The TMA results revealed that PCL‐T reduced the glass transition temperature more significantly in the transparent than in opaque films. Only the transparent CA/PCL‐T films presented a melting temperature, that reduced with higher concentrations of PCL‐T, suggesting a higher ordering (crystallinity) when the films were prepared in the absence of water, as observed from WAXD curves. The mechanical properties also showed that the transparent films were more soft and tough than the opaque films. In summary, PCL‐T was a good plasticizer agent for CA films due to the presence of hydrogen bonds between the components (FT‐IR spectra). The presence of water in the dry casting process has a significant effect mainly on film morphology and mechanical properties. Copyright © 2004 John Wiley & Sons, Ltd.