Radical polymerization of 2-methacryloyloxyethyl phosphorylcholine in water: kinetics and salt effects

The homogeneous polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) as betaine monomer with potassium peroxydisulfate (KPS) was kinetically investigated in water by means of FT-near IR spectroscopy. The overall activation energy of the polymerization was estimated to be 12.8 kcal/mol. The initial polymerization rate (R_p) at 40 °C was given by R_p = k[KPS]^0.98[MPC]^1.9. The presence of alkaline metal halides accelerated the polymerization. The larger the radius of metal cation or halide ion was, the larger the accelerating effect was. The accelerating salt effect was explained by interactions of salt ions with ionic moieties of the propagating polymer radical and/or the MPC monomer. A kinetic study was also performed on the polymerization of MPC with KPS in water in the presence of NaCl of 2.5 mol/l. R_p at 40 °C was expressed by R_p = k[KPS]^0.6[MPC]^1.6. A very low value of 4.7 kcal/mol was obtained as the overall activation energy of the polymerization.     

Radical polymerization behavior of vinyl phenylsufonylacetate

Vinyl phenylsulfonylacetate (VPSA) was prepared by the reaction of vinyl chloroacetate with sodium benzenesulfinate in acetone in the presence of a phase-transfer catalyst. VPSA showed a high radical homopolymerizability similar to vinyl acetate in spite of the fact that VPSA carries a phenyl group. The polymerization of VPSA with 2,2^′-azobisisobutyrate (MAIB) was kinetically investigated in acetone. The overall activation energy of the polymerization was 27.6 kcal/mol. The polymerization rate (R_p) at 50 °C was expressed by R_p=k[MAIB]^0.67[VPSA]^1.1. Poly(VPSA) showed exothermic (27 °C) and endothermic (57 °C) peaks in its DCS curve, corresponding to crystallization and melting. The tacticity of poly(VPSA) was estimated to be rr=29, mr=49, and mm=22.     

Synthesis of B-trisubstituted borazines via the rhodium-catalyzed hydroboration of alkenes with N,N′,N″-trimethyl or N,N′,N″-triethylborazine

Hydroboration of terminal and internal alkenes with N,N′,N″-trimethyl- and N,N′,N″-triethylborazine was carried out at 50 °C in the presence of a rhodium(I) catalyst. Addition of dppb or DPEphos (1 equiv.) to RhH(CO)(PPh₃)₃ gave the best catalyst for hydroboration of ethylene at 50 °C, resulting in a quantitative yield of B,B′,B″-triethyl-N,N′,N″-trimethylborazine. On the other hand, a complex prepared from (t-Bu)₃P (4 equiv.) and [Rh(coe)₂Cl]₂ gave the best yield for hydroboration of terminal or internal alkenes.     

Synthesis and structural characterization of a dichloro zinc complex of N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane: Application to ring opening polymerization of rac-lactide

A novel dichloro zinc complex (L¹)ZnCl₂, where L¹ is N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane, has been synthesized and characterized. The dimethyl derivatives, generated in situ from the well characterized dichloro zinc complexes (L¹)ZnCl₂ and (L²)ZnCl₂, where L² is N,N′-bis-(benzyl)-(R,R)-1,2-diaminocyclohexane, were employed as initiators for the ring opening polymerization (ROP) of rac-lactide (rac-LA). The complexes were found to be highly efficient initiators yielding the polylactide (PLA) with a narrow molecular weight distribution. The catalytic activity and heterotactic selectivity of the Zn(II) complexes were affected by the substituents on the phenyl groups of benzyl moieties in (R,R)-1,2-diaminocyclohexane. The dimethyl derivative of (L²)ZnCl₂ produced highly stereocontrolled PLA with P_r = 0.75 at −25 °C.     

Ruthenium-catalysed asymmetric transfer hydrogenation of N-(tert-butanesulfinyl)imines

The ruthenium complex prepared from [RuCl₂(p-cymene)]₂ and (1S,2R)-1-amino-2-indanol is a very efficient catalyst for the asymmetric transfer hydrogenation of (R)-N-(tert-butanesulfinyl)ketimines in isopropanol. By carefully removing all possible moisture from the reaction medium, chiral primary amines with very high optical purities (up to >99% ee) can be easily prepared in excellent yields by the diastereoselective reduction of the imines followed by removal of the sulfinyl group under mild acidic conditions. Reaction times of 1-4 h were needed to complete the reduction reactions when they were performed at 40 °C.     

Alkyl and dialkylammonium tetrafluoroborate catalyzed cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane

Alkyl and dialkylammonium tetrafluoroborate promoted cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane (1) in DMSO-d₆ were studied. The isomerization equilibrium constant K are within the range of 3.74-3.30 from 22 to 47 °C. Thermodynamic parameters of ΔH° and ΔS° for the isomerization were −0.95 kcal/mol and −0.59 cal/mol-K respectively. The isomerization rate is first order in [cis-1] and second order in [R_nNH_4−nBF₄]. Both components of R_nNH_4−n⁺ and BF₄⁻ are essential for the catalytic cis-trans isomerization. The catalytic strength follows the decreasing order of ⁺H₃N(CH₂)₆NH₃⁺>n-C₈H₁₇NH₃⁺>n-C₁₆H₃₃NH₃⁺>Me₃CNH₃⁺>PhCH₂NH₃⁺>Et₂NH₂⁺?Ph₂CHNH₃⁺, Et₃NH⁺. Inversion region was observed in the plot of ln(k_f/T) versus (1/T) with the ceiling located at around 38 °C. The positive activation enthalpy of 9 kcal/mol was estimated at 22-32 °C. The activation enthalpy turns to be slightly negative at T>38 °C.     

N,N′-Diaminoethane linked bis-TEMPO-mediated free radical polymerization of styrene

The N,N′-diaminoethane linked bis-TEMPO nitroxide (C2)-mediated free radical polymerization of styrene at 135 °C in bulk was studied. It was found that under comparable conditions a single nitroxide group of C2 biradical retards the polymerization more than TEMPO. The results were discussed in terms of through-space interactions between two TEMPO moieties of C2 biradical and diffusion effects. According to experimental results analyzed by means of statistical methods, the polymerization system displays a bimodal molecular-weight distribution (MWD) from the beginning of the polymerization process, most probably by undergoing decomposition side reactions leading to irreversible polymer arm (P) separation from PC2P to PC2 and PC2H alkoxyamines. The scale of the decomposition depends rather on the time the system is maintained at the polymerization temperature than on conversion of monomer. Generally, the contribution of low molecular weight chains to overall MWD increases with time of polymerization whereas the contribution of high molecular weight chains to MWD increases for less controlled polymerization systems. For polymers obtained at high [dinitroxide]/[initiator] ratio, the thermal treatment of polystyrene in mass at 135 °C unexpectedly revealed an increase of M_n, which can probably be ascribed to post-polymerization effects involving polystyrene with unsaturated chains end groups.     

Synthesis and characterization of copolymers of limonene with styrene initiated by azobisisobutyronitrile

The radical copolymerization of limonene with styrene by azobisisobutyronitrile in xylene at 80 ± 0.1 °C for 2 h, under inert atmosphere of N₂, yields alternating copolymers. The kinetic expression is R_p∝[I]^0.5[Sty]^1.0[Lim]^−1.0. The overall activation energy is calculated as 41 kJ/mol. The FTIR and ¹H-NMR spectra of copolymers show bands at 3000 and 1715 cm⁻¹ and peaks at 6.8 δ and 5.3 δ due to phenyl protons of styrene and trisubstituted olefinic protons of limonene, respectively. The values of reactivity ratios r₁(Sty)=0.0625 and r₂(Lim)=0.014, calculated by Kelen-Tüdos method. The Alfrey-Price Q-e parameters for limonene are 0.438 and −0.748, respectively. The penultimate unit effect is favoured in the present system and the value of φ is 38.49.     

Highly active new α-diimine nickel catalyst for the polymerization of α-olefins

A new silylated α-diimine ligand, bis[N,N′-(4-tert-butyl-diphenylsilyl-2,6-diisopropylphenyl)imino]acenaphthene 3, and its corresponding Ni(II) complex, {bis[N,N′-(4-tert-butyl-diphenylsilyl-2,6-diisopropylphenyl)imino]acenaphthene}dibromonickel 4, have been synthesized and characterized. The crystal structures of 3 and 4 were determined by X-ray crystallography. In the solid state, complex 4 is a dimer with two bridging Br ligands linking the two nickel centers, which have square pyramidal geometries. Complex 4, activated either by diethylaluminum chloride (DEAC) or methylaluminoxane (MAO) produces very active catalyst systems for the polymerization of ethylene and moderately active for the polymerization of propylene. The activity values are in the order of magnitude of 10⁷ g PE (mol Ni [E] h)⁻¹ for the polymerization of ethylene and of 10⁵ g PP (mol Ni [P] h)⁻¹ for the polymerization of propylene. NMR analysis shows that branched polyethylenes (PE) are obtained at room or higher temperatures and almost linear PE is obtained at 0 °C with 4/DEAC.     

Selection of entrainers in the 1-hexene/n-hexane system with a limited solubility

Vapor-liquid equilibria (VLE) have been measured for five 1-hexene/n-hexane/ionic liquid systems and 1-hexene/n-hexane/NMP (N-methyl-2-pyrrolidone) system with a headspace-gas chromatography (HSGC) apparatus at 333.15 K. The ionic liquids investigated were 1,3-dimethylimidazolium tetrafluoroborate [C₂MIM]⁺[BF₄]⁻, 1-butyl-3-methylimidazolium tetrafluoroborate [C₄MIM]⁺[BF₄]⁻, 1-methyl-3-octylimidazolium tetrafluoroborate [C₈MIM]⁺[BF₄]⁻, 1,3-dimethylimidazolium dicyanamide [C₂MIM]⁺[N(CN)₂]⁻ and 1-octylquinolinium bis(trifluoromethylsulfonyl)amide [C₈Chin]⁺[BTA]⁻. It was found that at low feeding concentration of 1-hexene and n-hexane, the separation ability of ionic liquids is in the order of [C₂MIM]⁺[BF₄]⁻ > [C₄MIM]⁺[BF₄]⁻ ≈ [C₂MIM]⁺[N(CN)₂]⁻ > [C₈MIM]⁺[BF₄]⁻ > [C₈Chin]⁺[BTA]⁻, which is consistent with the priori prediction of the COSMO-RS (conductor-like screening model for real solvents) model. But at high feeding concentration, the separation ability of ionic liquids is in the order of [C₂MIM]⁺[BF₄]⁻ < [C₄MIM]⁺[BF₄]⁻ ≈ [C₂MIM]⁺[N(CN)₂]⁻ < [C₈MIM]⁺[BF₄]⁻ < [C₈Chin]⁺[BTA]⁻. The liquid demixing effect should be taken into account. The activity coefficients of 1-hexene and n-hexane at infinite dilution calculated with the COSMO-RS model were correlated using the NRTL, Wilson and UNIQUAC model. In this work the predictive results from the COSMO-RS model and UNIFAC model for the 1-hexene/n-hexane and 1-hexene/n-hexane/NMP systems were compared. The UNIFAC model is one of the most important academic contributions by Prof. Jürgen Gmehling.     

Ce10[Si10O9N17]Br, Nd10[Si10O9N17]Br and Nd10[Si10O9N17]Cl oxonitridosilicate halides with a new layered structure type

The isotypic oxonitridosilicate halides Ce₁₀[Si₁₀O₉N₁₇]Br, Nd₁₀[Si₁₀O₉N₁₇]Br and Nd₁₀[Si₁₀O₉N₁₇]Cl were obtained by the reaction of the respective lanthanide metals, their oxides and halides with “Si(NH)₂” in a radiofrequency furnace at temperatures around 1800 °C, using CsBr, resp. CsCl, as a flux. The crystal structures were determined by single-crystal X-ray diffraction (Pbam, no. 55, Z=2; Ce/Br: a=10.6117(9) Å, b=11.2319(10) Å, c=11.688(8) Å, R1=0.0356; Nd/Br: a=10.523(2) Å, b=11.101(2) Å, c=11.546(2) Å, R1=0.0239; Nd/Cl: a=10.534(2) Å, b=11.109(2) Å, c=11.543(2) Å, R1=0.0253) and represent a new layered structure type. The structure refinements were performed utilizing an O/N-distribution model according to Paulings rules, i.e. nitrogen was positioned on all bridging sites and mixed O/N-occupation was assumed on the terminal sites resulting in charge neutrality of the compounds. The layers consist of condensed [SiN₂(O/N)₂] and [SiN₃(O/N)] tetrahedra of Q² and Q³ type. The chemical composition of the compounds was derived from chemical analyses for Nd₁₀[Si₁₀O₉N₁₇]Br and electron probe micro analyses (EPMA) for all three compounds. The results of IR spectroscopic investigations are reported.     

N,N-polymethylene-bisadenine complexes with d metal ions

The reaction of N⁹,N^9′-(tri or tetramethylene)-bisadenines (Ade₂C_x; x = 3 or 4) in HCl 2 M at 50 °C with MCl₂ · 2H₂O [M = Zn(II), Cd(II)] yields outer sphere compounds like the previously described [(H-Ade)₂C₃][ZnCl₄] · H₂O (3) and [(H-Ade)₂C₃]₂[Cd₂Cl₈(H₂O)₂] · 4H₂O (4) for Ade₂C₃ and the new {[(H-Ade)₂C₄][Cd₂Cl₆(H₂O)₂] · 2H₂O}_n (5) for Ade₂C₄. On the other hand, only in case of Zn(II) complexes by changing [HCl] to 0.1 M, the inner sphere compounds [H-(Ade)₂C₃(ZnCl₃)] (6) and [H-(Ade)₂C₄(ZnCl₃)] · 1.5H₂O (7) are obtained. X-ray diffraction study of compound 6, which represents the first inner sphere complex with a N⁹,N^9′-bisadenine, shows a zwitterionic form with one adenine ring protonated at N(1) while the other ring is coordinated via N(7) to a ZnCl₃ moiety as in other alkyl-adenine derivatives. In addition, with Ade₂C₄, is also possible to obtain another inner sphere complex: [(H-Ade)₂C₄(ZnCl₃)₂] · 3H₂O (8).     

Long-lived polymer radicals. VI. Polymerization of N-methylmethacrylamide with formation of living propagation radicals

The polymerization of N-methylmethacrylamide (NMMAm) with azobisisobutyronitrile (AIBN) was investigated kinetically in benzene. This polymerization proceeded heterogeously with formation of the very stable poly(NMMAm) radicals. The overall activation energy of this polymerization was calculated to be 23 kcal/mol. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.63-0.68[NMMAm]^1?2.5. Dependence of R_p on the monomer concentration increased with increasing NMMAm concentration. From an ESR study, cyanopropyl radicals escaping the solvent cage were found to be converted to the living propagating radicals of NMMAm in very high yields (ca. 90%). Formation mechanism of the living polymer radicals was discussed on the basis of kinetic, ESR spectroscopic, and electron microscopic results.     

Effects of macromolecular matrix on the process of radical polymerization of ionizable monomers

Radical polymerization of methacrylic acid (MAA) and acrylic acid (AA) in the presence of a positively charged macromolecular matrix was studied. In the presence of a matrix, the rates of polymerization were remarkably increased, especially in high pH region. This suggests that electrostatic interaction between the macromolecular matrix and the growing chains and/or the monomer molecules plays an important role in the process of polymerization reaction. The kinetic orders were greatly influenced by the relative matrix concentration (PC) as follows: for (PC)₀ > [M]₀, R_p = k[M]^0.9 [PC]_0.3 [I]^0.8≤ [M]₀ R_p = k[M]^0.3[PC]⁰[I]^0,8 where [M] and [I] are monomer and initiator concentration, respectively, and k is a constant. The mechanism of the interaction of matrix with monomer and/or growing chains in the process of the propagation is discussed. The complex formed in the matrix polymerization could be easily made into fiber by spinning.     

Effect of clay on the corrosion protection efficiency of PMMA/Na-MMT clay nanocomposite coatings evaluated by electrochemical measurements

The preparation of PMMA-clay nanocomposites was investigated by using sodium dodecylbenzenesulfonate (SDS) and potassium peroxodisulfate (KPS) as a surfactant and chain initiator for an in situ emulsion polymerization reaction, respectively. The as-prepared nanocomposites were then characterized by Fourier transformation infrared (FTIR) spectroscopy, wide-angle X-ray diffraction (WAXRD) patterns and transmission electron microscopy (TEM).It should be noted that the nanocomposite coating containing 1 wt% of clay loading was found to exhibit an observable enhanced corrosion protection on cold-rolled steel (CRS) electrode at higher operational temperature of 50 °C, which was even better than that of uncoated and electrode-coated with PMMA alone at room temperature of 30 °C based on the electrochemical parameter evaluations (e.g., E_corr, R_p, I_corr, R_corr and impedance). In this work, all electrochemical measurements were performed at a double-wall jacketed cell, covered with a glass plate, through which water was circulated from a thermostat to maintain a constant operational temperature of 30, 40 and 50 ± 0.5 °C. Moreover, a series of electrochemical parameters shown in Tafel, Nyquist and Bode plots were all used to evaluate PCN coatings at three different operational temperatures in 5 wt% aqueous NaCl electrolyte. The molecular barrier properties at three different operational temperatures of PMMA and PCN membranes were investigated by gas permeability analyzer (GPA) and vapor permeability analyzer (VPA). Effect of material composition on the molecular weight and optical properties of neat PMMA and PCN materials, in the form of solution and membrane, were also studied by gel permeation chromatography (GPC) and UV-vis transmission spectra.     

Synthesis,electrochemistry and in situ spectroelectrochemistry of a new Co(III) thio Schiff-base complex with N,N′-bis(2-aminothiophenol)-1,4-bis(carboxylidene phenoxy)butane

A new cobalt Schiff-base complex, [Co(L)(OH)(H₂O)] (where L = [N,N′-bis(2-aminothiophenol)-1,4-bis(carboxylidene phenoxy)butane), was synthesized and its electrochemical and spectroelectochemical properties were investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and thin-layer spectro-electrochemistry in solutions of dimethyl sulfoxide (DMSO) and dichloromethane (CH₂Cl₂). The [Co(L)(OH)(H₂O)] complex displays two well-defined reversible reduction processes with the corresponding anodic waves. The half-wave potentials of the first and second reduction processes were displayed at E_1/2 = 0.08 V and E_1/2 = −1.21 V (scan rate: 0.100 Vs⁻¹) in DMSO, and E_1/2 = −0.124 V and E_1/2 = −1.32 V (scan rate: 0.100 Vs⁻¹) in CH₂Cl₂. The potentials of the reduction processes in DMSO are shifted toward negative potentials (0.220–0.112 V) compared to those in CH₂Cl₂. The electrochemical results are assigned to two one-electron reduction processes; [Co(III)L] + ⁻e → [Co(II)L]⁻ and [Co(II)L]⁻ + ⁻e → [Co(I)L]²⁻. The six-coordination of the complex remains unchanged during the reduction processes and the electron transfer processes were not followed by a chemical reaction upon scan reversal. It was also seen that [Co(L)(OH)(H₂O)] was reduced at a more positive potential than the corresponding salen analogs. The shift and reversibility are apparently related to the high degree of electron delocalization of the [Co(L)(OH)(H₂O)] complex, having a N₂O₂S₂ donor set and two additional benzene units. Additionally, in situ spectroelectrochemical measurements support Co(III)/Co(II) and Co(II)/Co(I) reversible reduction processes with the observation of the corresponding spectral changes with the applied potentials E_app = −0.40 and −1.60 V. Application of the spectroelectrochemical results allowed the determination ofE_1/2 and n (the number of electrons) from the spectra of the fully oxidized and reduced species in one unified experiment as well. The results obtained by this method are in agreement with those by the CV and DPV methods.     

Sonogashira reactions catalyzed by a new and efficient copper(I) catalyst incorporating N-benzyl DABCO chloride

A new and effective catalytic system using [N-benzyl DABCO]⁺[Cu₄Cl₅]⁻ was developed for the palladium-free Sonogashira cross-coupling reactions of phenylacetylene with a variety of aryl halides. In this homogeneous catalytic system, 1-benzyl-4-aza-1-azoniabicyclo[2.2.2]octane chloride, a quaternary ammonium salt containing a coordinating center, plays an important role and increases the efficiency of Cu(I) species during the reaction. A number of internal alkynes were produced in moderate to excellent yields, in short reaction times in DMF at 135 °C.     

Liquid crystal behaviour of ionic allylpalladium complexes containing 2-pyrazolylpyridine as bidentate N,N′-ligand

Two types of Pd-complexes containing the new N,N′-ligands 2-[3-(4-alkyloxyphenyl)pyrazol-1-yl]pyridine (pz^Rpy; R = C₆H₄OC_nH_2n+1, n = 6 (hp), 10 (dp), 12 (ddp), 14 (tdp), 16 (hdp), 18 (odp)) (1-6), namely c-[Pd(Cl)₂(pz^Rpy)] (7-10) and c-[Pd(η³-C₃H₅)(pz^Rpy)]BF₄ (11-16), have been synthesised and characterised by different spectroscopic techniques. Those members of the second type containing the largest chains (R = ddp 13, tdp 14, hdp 15, odp 16) have been found to have liquid crystal properties showing smectic A mesophases. By contrast, neither the free ligands pz^Rpy nor their related c-[Pd(Cl)₂(pz^Rpy)] complexes exhibited mesomorphism. The new synthesised metallomesogens are mononuclear complexes with an unsymmetrical molecular shape as deduced from the X-ray structures of c-[Pd(η³-C₃H₅)(pz^Rpy)]BF₄ (R = hp, 11; dp, 12). Both compounds, which are isostructural, show a distorted square-planar environment on the palladium centres defined by the allyl and the bidentate pz^Rpy ligands. The crystal structure reveals that both the counteranion and the pz^Rpy ligand function as a source of hydrogen-bonding and intermolecular π?π contacts resulting in a ²D supramolecular assembly.     

Synthesis characterizations and properties of a new fluoro-maleimide polymer

Novel 4-(4-trifluoromethyl)phenoxy N-phenyl-maleimide (FPMI) was synthesized. The free radical-initiated polymerization of FPMI was carried out in 1,4-dioxane solution using azobisisobutyronitrile as initiator. The monomer was investigated by FTIR, ¹H NMR, ¹³C NMR and elemental analysis, while the polymer was investigated by FTIR, ¹H NMR and ¹³C NMR. The effect of the monomer concentration, initiator concentration and temperature on the rate of polymerization (R_p) was studied. The activation energy of the polymerization was calculated (ΔE = 48.94 kJ/mol). The molecular weight of PFPMI and polydispersity index of the polymer were determined by gel permeation chromatography and were equal to 73,500, 16,700 and 2.27, respectively. The properties of PFPMI, including thermal behavior, thermal stability, the glass transition temperature (T_g = 236 °C), photo-stability, solubility and solution viscosity were studied.     

Effect of ketimide ligand for ethylene polymerization and ethylene/norbornene copolymerization catalyzed by (cyclopentadienyl)(ketimide)titanium complexes-MAO catalyst systems: Structural analysis for CpTiCl2(NCPh2)

Ligand effects on the catalytic activity [and norbornene (NBE) incorporation] for both ethylene polymerization and ethylene/NBE copolymerization using half-titanocenes (titanium half-sandwich complexes) containing ketimide ligand of type Cp′TiCl₂[NC(R¹)R²] [Cp′ = Cp (1), C⁵Me⁵ (Cp^∗, 2); R¹,R² = ^tBu,^tBu (a), ^tBu,Ph (b), Ph,Ph (c)]-methylaluminoxane (MAO) catalyst systems have been investigated. CpTiCl₂[NC(^tBu)Ph] (1b) CpTiCl₂(NCPh₂) (1c), and Cp^∗TiCl₂(NCPh₂) (2c) were prepared and identified; the structure of Cp^∗TiCl₂(NCPh₂) (2c) was determined by X-ray crystallography. The catalytic activity for ethylene polymerization increased in the order: 1a > 1b > 1c, suggesting that an electronic nature of the ketimide ligand affects the activity. However, molecular weight distributions for resultant (co)polymers prepared by 1b,c and by 2c-MAO catalyst systems were bi- or multi-modal, suggesting that the ketimide substituent plays a key role in order for these (co)polymerizations to proceed with single catalytically-active species. CpTiCl₂(NC^tBu₂) (1a) exhibited both remarkable catalytic activity and efficient NBE incorporation for ethylene/NBE copolymerization.