Arm-first method as a simple and general method for synthesis of miktoarm star copolymers

Miktoarm star copolymers containing two or more arm species were synthesized by atom transfer radical polymerization using a simple and general "arm-first" method, that is, one-pot cross-linking a mixture of different linear macroinitiator (MI) species by a divinyl cross-linker, such as divinylbenzene. Using linear MIs with a high degree of bromine chain-end functionality, including polyacrylate, polystyrene, polymethacrylate and poly(ethylene oxide), resulted in high-yield star polymers (>90%). Characterized by liquid adsorption chromatography techniques, which separated star polymers on the basis of the chemical composition of arms, the obtained star product was proved to be miktoarm star copolymers containing two or more arm species in one molecule, instead of mixture of different homoarm star polymers. Within our investigation, the molar ratios of the arms in the miktoarm star copolymers were always in agreement with the composition of the initial MI mixture, indicating the powerful capacity of this arm-first method for synthesis of miktoarm star copolymers with potentially any molar ratios and species of the arms. By using a mixture containing five types of linear MIs with different chemical compositions, miktoarm star copolymers containing five kinds of arms were synthesized for the first time, which significantly expanded the methodologies for synthesis of miktoarm star copolymers by living polymerization techniques.     

Synthesis of miktoarm star (block) polymers based on a heterofunctional initiator via combination of ROP, ATRP and functional group transformation

Versatile miktoarm three-arm star polymers, (polystyrene)(polyε-caprolactone)₂ ((PS)(PCL)₂), (PS-b-poly(n-butyl acrylate))(PCL-b-PS-b-poly(n-butyl acrylate))₂ ((PS-b-PnBA)(PCL-b-PS-b-PnBA)₂) and (PtBA-b-PS)(PCL-b-PtBA-b-PS)₂ were synthesized via combination of atom-transfer radical polymerization (ATRP), functional group transformation technique and ring opening polymerization (ROP) using 1,1-dihydroxymethyl-1-(2-bromoisobutyryloxy)methyl ethane (DHB) as a heterofunctional initiator. In the synthesis of (PS)(PCL)₂ by combination of ROP of ε-caprolactone (ε-CL) and ATRP, the implementation sequence, ROP followed by ATRP, was proved to be effective to get a well-defined miktoarm star polymer than the reverse one. The two miktoarm star block polymers, (PS-b-PnBA)(PCL-b-PS-b-PnBA)₂ and (PtBA-b-PS)(PCL-b-PtBA-b-PS)₂, were prepared by one ROP step, one group transformation and ATRP steps using the same initiator. All the polymers have defined structures and their molecular weights are adjustable with good controllability.     

Aggregation phenomena of linear and miktoarm star copolymers of styrene and dimethylsiloxane: Influence of the architecture

The micellar behavior of PS-b-PDMS, PS-b-PDMS-b-PS linear block and (PS)₂(PDMS) miktoarm star copolymers of polystyrene (PS) and polydimethylsiloxane (PDMS) is investigated in DMF, a selective solvent for PS. The linear PS-b-PDMS and star (PS)₂(PDMS) copolymers exhibit different macromolecular architectures but similar compositions and total molecular weight, while the linear PS-b-PDMS-b-PS copolymer has the same composition as the diblock and miktoarm star but double their molecular weight. Static, dynamic light scattering and viscometry were used for the structural characterization of the micelles. Aggregation numbers were found to increase in the order PS-b-PDMS-b-PS < (PS)₂(PDMS) < PS-b-PDMS. The corona thickness was dependent on the molecular weight of the soluble PS chains. In the case of (PS)₂(PDMS), although the core area per PS chain, A_C, was significantly lower than that of the linear copolymers, the coronal chains were not significantly stretched. This can be attributed to the stiff nature of the PS chains, which maintains the elongated form of the chains.     

Synthesis of well‐defined miktoarm star polymers of poly(dimethylsiloxane) by the combination of chlorosilane and benzyl chloride linking chemistry

A series of novel four‐arm A₂B₂ and A₂BC and five‐arm A₂B₂C miktoarm star polymers, where A is poly(dimethylsiloxane) (PDMS), B is polystyrene (PS), and C is polyisoprene (PI), were successfully synthesized by the combination of chlorosilane and benzyl chloride linking chemistry. This new and general methodology is based on the linking reaction of in‐chain benzyl chloride functionalized poly(dimethylsiloxane) (icBnCl–PDMS) with the in‐chain diphenylalkyl (icD) living centers of PS‐DLi‐PS, PS‐DLi‐PI, or (PS)₂‐DLi‐PI. icBnCl–PDMS was synthesized by the selective reaction of lithium PDMS enolate (PDMSOLi) with the chlorosilane groups of dichloro[2‐(chloromethylphenyl)ethyl]methylsilane, leaving the benzyl chloride group intact. The icD living polymers, characterized by the low basicity of DLi to avoid side reactions with PDMS, were prepared by the reaction of the corresponding living chains with the appropriate chloro/bromo derivatives of diphenylethylene, followed by a reaction with BuLi or the living polymer. The combined molecular characterization results of size exclusion chromatography, ¹H NMR, and right‐angle laser light scattering revealed a high degree of structural and compositional homogeneity in all miktoarm stars prepared. The power of this general approach was demonstrated by the synthesis of a morphologically interesting complex miktoarm star polymer composed of two triblock terpolymer (PS‐b‐PI‐b‐PDMS) and two diblock copolymer (PS‐b‐PI) arms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6587–6599, 2006     

Block and star block copolymers by mechanism transformation X. Synthesis of poly(ethylene oxide) methyl ether/polystyrene/poly(l-lactide) ABC miktoarm star copolymers by combination of RAFT and ROP

Poly(ethylene oxide) methyl ether/polystyrene/poly(l-lactide) (MPEO/PSt/PLLA) ABC miktoarm star copolymers were synthesized by combination of reversible addition-fragmentation transfer (RAFT) polymerization and ring-opening polymerization (ROP) using bifunctional macro-transfer agent, MPEO with two terminal dithiobenzoate and hydroxyl groups. It was prepared by reaction of MPEO with maleic anhydride (MAh), subsequently reacted with dithiobenzoic acid and ethylene oxide. RAFT polymerization of St at 110 °C yielded block copolymer, MPEO-b-PSt [(MPEO)(PSt)CH₂OH], and then it was used to initiate the polymerization of l-lactide in the presence of Sn(OCt)₂ at 115 °C to produce ABC miktoarm star polymers, s-[(MPEO)(PSt)(PLLA)]. The structures of products obtained at each synthetic step were confirmed by NMR and gel permeation chromatography data.     

Morphology and microphase separation of star copolymers

Star copolymers have attracted significant interest due to their different characteristics compared with diblock copolymers, including higher critical micelle concentration, lower viscosity, unique spatial shape, or morphologies. Development of synthetic skills such as anionic polymerization and controlled radical polymerization have made it possible to make diverse architectures of polymers. Depending on the molecular architecture of the copolymer, numerous morphologies are possible, for instance, Archimedean tiling patterns and cylindrical microdomains at symmetric volume fraction for miktoarm star copolymers as well as asymmetric lamellar microdomains for star‐shaped copolymers, which have not been reported for linear block copolymers. In this review, we focus on morphologies and microphase separations of miktoarm (A_mB_n and ABC miktoarm) star copolymers and star‐shaped [(A‐b‐B)_n] copolymers with nonlinear architecture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1–21     

Synthesis,characterization, and fluorescence of pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer with pentaerythritol core

Novel and well‐defined pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymers were successfully achieved by combination of esterification, atom transfer radical polymerization (ATRP), divergent reaction, ring‐opening polymerization (ROP), and coupling reaction on the basis of pentaerythritol. The reaction of pentaerythritol with 2‐bromopropionyl bromide permitted ATRP of styrene (St) to form four‐arm star‐shaped polymer (PSt‐Br)₄. The molecular weights of these polymers could be adjusted by the variation of monomer conversion. Eight‐hydroxyl star‐shaped polymer (PSt‐(OH)₂)₄ was produced by the divergent reaction of (PSt‐Br)₄ with diethanolamine. (PSt‐(OH)₂)₄ was used as the initiator for ROP of ε‐caprolactone (CL) to produce eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL)₂)₄. The molecular weights of (PSt‐b‐(PCL)₂)₄ increased linearly with the increase of monomer. After the coupling reaction of hydroxyl‐terminated (PSt‐b‐(PCL)₂)₄ with 1‐pyrenebutyric acid, pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL‐pyrene)₂)₄ was obtained. The eight‐arm star‐shaped dendrimer‐like copolymers presented unique thermal properties and crystalline morphologies, which were different from those of linear poly(ε‐caprolactone) (PCL). Fluorescence analysis indicated that (PSt‐b‐(PCL‐pyrene)₂)₄ presented slightly stronger fluorescence intensity than 1‐pyrenebutyric acid when the pyrene concentration of them was the same. The obtained pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer has potential applications in biological fluorescent probe, photodynamic therapy, and optoelectronic devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2788–2798, 2008     

Synthesis of ABC-type miktoarm star polymers by “click” chemistry, ATRP and ROP

ABC-type miktoarm star polymers, poly(ethylene oxide)-block-polystyrene-block-poly (ε-caprolactone)s (PEO-b-PS-b-PCL) were synthesized via combination of “click” chemistry, atom-transfer radical polymerization (ATRP) and ring opening polymerization (ROP). Azide ended PEO arms, PEO-N₃, and a trifunctional molecule, propargyl 2-hydroxylmethyl-2-(α-bromoisobutyraloxymethyl)-propionate (PHBP), were prepared first, respectively. A “click” reaction of PEO-N₃ and PHBP generated a PEO macroinitiator, PEO-(Br)(OH) with two functionalities, one is hydroxyl group and the other is α-bromoisobutyraloxyl group. Consecutive ATRP of styrene (St) and ROP of ε-caprolactone (ε-CL) from the PEO macroinitiator produced the PEO-b-PS-b-PCL miktoarm stars. All the structures of the polymers were determined.     

Drug and plasmid DNA co-delivery nanocarriers based on abctype polypeptide hybrid miktoarm star copolymers

We report on the fabrication of self-assembled micelles from ABC-type miktoarm star polypeptide hybrid copolymers consisting of poly(ethylene oxide), poly(L-lysine), and poly(ε-caprolactone) arms, PEO(-b-PLL)-b-PCL, and their functional applications as co-delivery nanocarriers of chemotherapeutic drugs and plasmid DNA. Miktoarm star copolymer precursors, PEO(-b-PZLL)-b-PCL, were synthesized at first via the combination of consecutive "click" reactions and ring-opening polymerizations (ROP), where PZLL is poly(ε-benzyloxycarbonyl-L-lysine). Subsequently, the deprotection of PZLL arm afforded amphiphilic miktoarm star copolymers, PEO(-b-PLL)-b-PCL. In aqueous media at pH 7.4, PEO(-b-PLL)-b-PCL self-assembles into micelles consisting of PCL cores and hydrophilic PEO/PLL hybrid coronas. The hydrophobic micellar cores can effectively encapsulate model hydrophobic anticancer drug, paclitaxel; whereas positively charged PLL arms within mixed micellar corona are capable of forming electrostatic polyplexes with negatively charged plasmid DNA (pDNA) at N/P ratios higher than ca. 2. Thus, PEO(-b-PLL)-b-PCL micelles can act as co-delivery nanovehicles for both chemotherapeutic drugs and genes. Furthermore, polyplexes of pDNA with paclitaxel-loaded PEO(-b-PLL)-b-PCL micelles exhibited improved transfection efficiency compared to that of pDNA/blank micelles. We expect that the reported strategy of varying chain topologies for the fabrication of co-delivery polymeric nanocarriers can be further applied to integrate with other advantageous functions such as targeting, imaging, and diagnostics.     

Syntheses and characterization of 16‐arm star and star diblock copolymer and AB8 9‐miktoarm star copolymer via NMRP and ROP from dendritic multifunctional macroinitiators

A dendritic macroinitiator having 16 TEMPO‐based alkoxyamines, Star‐16 , was prepared by the reaction of a dendritic macroinitiator having eight TEMPO‐based alkoxyamines, [G‐3]‐OH , with 4,4′‐bis(chlorocarbonyl)biphenyl. The nitroxide‐mediated radical polymerization (NMRP) of styrene (St) from Star‐16 gave 16‐arm star polymers with PDI of 1.19–1.47, and NMPR of 4‐vinylpyridine from the 16‐arm star polymer gave 16‐arm star diblock copolymers with PDI of 1.30–1.43. The ring‐opening polymerization of ε‐caprolactone from [G‐3]‐OH and the subsequent NMRP of St gave AB₈ 9‐miktoarm star copolymers with PDI of 1.30–1.38. The benzyl ether linkages of the 16‐arm star polymers and the AB₈ 9‐miktoarm star copolymers were cleaved by treating with Me₃SiI, and the resultant poly(St) arms were investigated by size exclusion chromatography (SEC). The SEC results showed PDIs of 1.23–1.28 and 1.18–1.22 for the star polymers and miktoarm stars copolymers, respectively, showing that they have well‐controlled poly(St) arms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1159–1169, 2007.     

Hydrodynamic properties of model 3-miktoarm star copolymers

The synthesis of well-defined, nearly monodispersed, 3-miktoarm (from the greek word μlkτós meaning mixed) star copolymer of the A₂B type is described. A and B is either polystyrene (PS), polybutadiene (PBd), or polyisoprene (PI). The sequential controlled addition of living anionic B and A chains to methyltrichlorosilane leads to narrow molecular weight distribution miktoarm star copolymers with homogeneous composition. Characterization was carried out by size exclusion chromatography, low-angle laser light scattering, laser differential refractometry, membrane and vapor pressure osmometry, nuclear magnetic resonance and ultraviolet spectroscopy. Analysis of [η], R_H and R_v of the A₂B and one A₂B₂ miktoarm copolymers, suggests that a small expansion of the copolymer occurs either in a good solvent for both species or in a Θ solvent for one of them, as compared with the corresponding star homopolymers. This is in contrast to results obtained on linear block copolymers, and is due to the increased occurrence of heterocontacts in the miktoarm starshaped architecture. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of amphiphilic star copolymers of 2-(dimethylamino)ethyl methacrylate and methyl methacrylate: Effects of architecture and composition

Six amphiphilic star copolymers comprising hydrophilic units of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and hydrophobic units of methyl methacrylate (MMA) were prepared by the sequential group transfer polymerization (GTP) of the two comonomers and ethylene glycol dimethacrylate (EGDMA) cross-linker. Four star-block copolymers of different compositions, one miktoarm star, and one statistical copolymer star were synthesized. The molecular weights (MWs) and MW distributions of all the star copolymers and their linear homopolymer and copolymer precursors were characterized by gel permeation chromatography (GPC), while the compositions of the stars were determined by proton nuclear magnetic resonance (¹H NMR) spectroscopy. Tetrahydrofuran (THF) solutions of all the star copolymers were characterized by static light scattering to determine the absolute weight-average MW () and the number of arms of the stars. The of the stars ranged between 359,000 and 565,000 g mol⁻¹, while their number of arms ranged between 39 and 120. The star copolymers were soluble in acidic water at pH 4 giving transparent or slightly opaque solutions, with the exception of the very hydrophobic DMAEMA₁₀-b-MMA₃₀-star, which gave a very opaque solution. Only the random copolymer star was completely dispersed in neutral water, giving a very opaque solution. The effective pKs of the copolymer stars were determined by hydrogen ion titration and were found to be in the range 6.5-7.6. The pHs of precipitation of the star copolymer solutions/dispersions were found to be between 8.8-10.1, except for the most hydrophobic DMAEMA_10-b-MMA₃₀-star, which gave a very opaque solution over the whole pH range.     

Facile synthesis of star‐shaped copolymers via combination of RAFT and ring opening polymerization

Reversible addition fragmentation chain transfer (RAFT) polymerization and bifunctional sparteine/thiourea organocatalyst‐mediated ring opening polymerization (ROP) were combined to produce poly(L ‐lactide) star polymers and poly(L ‐lactide‐co‐styrene) miktoarm star copolymers architecture following a facile experimental procedure, and without the need for specialist equipment. RAFT was used to copolymerize ethyl acrylate (EA) and hydroxyethyl acrylate (HEA) into poly(EA‐co‐HEA) co‐oligomers of degree of polymerization 10 with 2, 3, and 4 units of HEA, which were in turn used as multifunctional initiators for the ROP of L ‐lactide, using a bifunctional thiourea organocatalytic system. Furthermore, taking advantage of the living nature of RAFT polymerization, the multifunctional initiators were chain extended with styrene (poly((EA‐co‐HEA)‐b‐styrene) copolymers), and used as initiators for the ROP of L ‐lactide, to yield miktoarm star copolymers. The ROP reactions were allowed to proceed to high conversions (>95%) with good control over molecular weights (ca. 28,000‐230,000 g/mol) and polymer structures being observed, although the molecular weight distributions are generally broader (1.3–1.9) than those normally observed for ROP reactions. The orthogonality of both polymerization techniques, coupled with the ubiquity of HEA, which is used as a monomer for RAFT polymerization and as an initiator for ROP, offer a versatile approach to star‐shaped copolymers. Furthermore, this approach offers a practical approach to the synthesis of polylactide star polymers without a glove box or stringent reaction conditions. The phase separation properties of the miktoarm star copolymers were demonstrated via thermal analyses. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6396–6408, 2009     

Synthesis and morphological characterization of miktoarm star copolymers (PCL)2(PS)2 of poly(ε‐caprolactone) and polystyrene

An heterofunctional initiator combining two reactive sites for ring opening polymerization and two for atom transfer radical polymerization was used to prepare three A₂B₂ miktoarm star copolymers of poly(ε‐caprolactone) (PCL) and polystyrene (PS). The morphology and thermal properties were studied by transmission electron microscopy, polarized light optical microscopy, and differential scanning calorimetry. The (PCL)₂(PS)₂ 72/28 (72 wt % PCL) sample was crystallized from a disordered melt. In this case, crystallization drove the structure formation and a lamellar morphology was obtained at the microdomain level, while spherulites were observed at a superstructural level. The other two samples, 39/61 and 27/73, with lower PCL content and higher total molecular weight, were not able to form spherulites. Surprisingly, these miktoarm star copolymers exhibited hexagonally packed cylinders and spheres morphologies, respectively, instead of lamellar and cylindrical morphology. Such unexpected and novel behavior was explained in terms of the higher resistance of the arms to be stretched in a miktoarm star copolymer when compared with the corresponding linear diblocks. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5387–5397, 2007     

Composition and molecular weight analysis of styrene-acrylic copolymers using thermal field-flow fractionation

Thermal field-flow fractionation coupled with online multiangle light scattering, differential refractive index and quasielastic light scattering (ThFFF-MALS/dRI/QELS) was used to simultaneously determine the molecular weight (MW) and composition of polystyrene-poly(n-butyl acrylate) (PS-PBA) and polystyrene-poly(methyl acrylate) (PS-PMA) copolymers. The online measurement of the normal diffusion coefficient (D) by QELS allowed calculation of the copolymer thermal diffusion coefficient (D(T)) of sample components as they eluted from the ThFFF channel. DT was found to be independent of MW for copolymers with similar compositions and dependent on composition for copolymers with similar MW in a non-selective solvent. By using a solvent that is non-selective to both blocks of the copolymer, it was possible to establish a universal calibration plot of DT versus mole fraction of one of the monomer chemistries comprising the copolymer. PS-PBA and PS-PMA linear diblock polymers were determined to vary in composition from 100/0 to 20/80 wt% PS/acrylate and ranged in MWs between 30 and 360 kDa. The analysis of a PS-PBA miktoarm star copolymer revealed a polydisperse material with a weight percent PBA of 50-75% and MW ranging from 100 to 900 kDa. The presented ThFFF-MALS/dRI/QELS method allowed rapid characterization of polymers with MW and chemical distributions in a single analysis.     

A New Approach for the Synthesis of Miktoarm Star Polymers Through a Combination of Thiol–Epoxy “Click” Chemistry and ATRP/Ring‐Opening Polymerization Techniques

A new approach was developed for synthesis of certain A₃B₃‐type of double hydrophilic or amphiphilic miktoarm star polymers using a combination of “grafting onto” and “grafting from” methods. To achieve the synthesis of desired miktoarm star polymers, acetyl protected poly(ethylene glycol) (PEG) thiols (M_n = 550 and 2000 g mol^?1) were utilized to generate A₃‐type of homoarm star polymers through an in situ protective group removal and a subsequent thiol–epoxy “click” reaction with a tris‐epoxide core viz. 1,1,1‐tris(4‐hydroxyphenyl)ethane triglycidyl ether. The secondary hydroxyl groups generated adjacent to the core upon the thiol–epoxy reaction were esterified with α‐bromoisobutyryl bromide to install atom transfer radical polymerization (ATRP) initiating sites. ATRP of N‐isopropylacrylamide (NIPAM) using the three‐arm star PEG polymer fitted with ATRP initiating sites adjacent to the core afforded A₃B₃‐type of double hydrophilic (PEG)₃[poly(N‐isopropylacrylamide)] (PNIPAM)₃ miktoarm star polymers. Furthermore, the generated hydroxyl groups were directly used as initiator for ring‐opening polymerization of ε‐caprolactone to prepare A₃B₃‐type of amphiphilic (PEG)₃[poly(ε‐caprolactone)]₃ miktoarm star polymers. The double hydrophilic (PEG)₃(PNIPAM)₃ miktoarm star polymers showed lower critical solution temperature around 34 °C. The preliminary transmission electron microscopy analysis indicated formation of self‐assembly of (PEG)₃(PNIPAM)₃ miktoarm star polymer in aqueous solution. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 146–156     

Synthesis and pyrolysis of ABC type miktoarm star copolymers with polystyrene,poly(lactic acid) and poly(ethylene glycol) arms

An ABC type miktoarm star copolymer possessing polystyrene (PS), poly(lactic acid) (PLA) and poly(ethylene glycol) (PEG) arms was synthesized by combining Atom Transfer Radical Polymerization (ATRP) and Ring Opening Polymerization (ROP) with two click chemistries, namely thiol–ene and copper catalyzed azide–alkyne cycloaddition (CuAAC). For this purpose, a core 1-(allyloxy)-3-azidopropan-2-ol with allyl and azide functionalities was synthesized in two steps. Then, clickable polymers, polystyrene with thiol functionality (PS–SH) and poly(ethylene glycol) with alkyne functionality (PEG–acetylene) were independently prepared. As the first step of the grafting onto process, PS–SH was thiol–ene clicked onto the core to yield PS–N₃–OH. The second arm was then incorporated onto the core by the Ring Opening Polymerization (ROP) of l-(?)-Lactide (LA) using as PS–N₃–OH initiator and tin(II) 2-ethylhexanoate as catalyst. Finally, alkyne–PEG–acetylene was bonded to the resulting PLA–PS–N₃ using CuAAC click reaction. All intermediates, related polymers at different stages and final PS–PLA–PEG miktoarm star copolymer were characterized by ¹H NMR, FT-IR, SEC and DP-MS analyses. Direct pyrolysis mass spectrometry, (DP-MS) analyses of PS–PLA–PEG and all intermediate polymers indicated that the decomposition of PS and PEG chains occurred almost independently, following the degradation mechanisms of the corresponding homopolymers. On the other hand, during the pyrolysis of PS–PLA–PEG, elimination of H₂O during the decomposition of PEG chains at the early stages of pyrolysis caused hydrolysis of PLA chains and increased the yields of CO₂, CO and units involving unsaturation and/or crosslinked structure.     

Thermal curing and photocuring of a DGEBA modified with multiarm star poly(glycidol)-b-poly(ε-caprolactone) polymers of different arm lengths

The influence of two multiarm star polymers, hyperbranched poly(glycidol)-b-poly(ε-caprolactone) of different arm lengths, on the thermal curing and the photocuring of a diglycidyl ether of bisphenol A epoxy resin (DGEBA) is studied. Star polymer with short arms PCL-10 decelerates more the thermal curing than the polymer with long arms PCL-30 because the latter is less solubilized in the epoxy matrix and its effect on the polymerization of the resin and the thermal–mechanical properties is less important. The kinetic triplet corresponding to the thermal curing of the different formulations has been determined. In the analysis of the photocuring process, we have also found that short-arm star PCL-10 is better solubilized in the epoxy matrix and its effect on the photocuring kinetics is more significant than that of the long-arm star. The effect of both polymers on the thermal–mechanical properties of the cured thermosets is less important due to the lower solubility at the relatively low photocuring temperatures.     

Synthesis and cleavage of core‐labile poly(alkyl methacrylate) star polymers

Core‐cleavable star polymers were synthesized by the coupling of living anionic poly(alkyl methacrylate) arms with either dicumyl alcohol dimethacrylate (DCDMA) or 2,5‐dimethyl‐2,5‐hexanediol dimethacrylate (DHDMA). This synthetic methodology led to the formation of star polymers that exhibited high molecular weights and relatively narrow molecular weight distributions. The labile tertiary alkyl esters in the DCDMA and DHDMA star polymer cores were readily hydrolyzed under acidic conditions. High‐molecular‐weight star polymer cleavage led to well‐defined arm polymers with lower molecular weights. Hydrolysis was confirmed via ¹H NMR spectroscopy and gel permeation chromatography. Thermogravimetric analysis (TGA) of the star polymers demonstrated that the DCDMA and DHDMA star polymer cores also thermally degraded in the absence of acid catalysts at 185 and 220 °C, respectively, and the core‐cleavage temperatures were independent of the arm polymer composition. The difference in the core‐degradation temperatures was attributed to the increased reactivity of the DCDMA‐derived cores. TGA/mass spectrometry detected the evolution of the diene byproduct of the core degradation and confirmed the proposed degradation mechanism. The DCDMA monomer exhibited a higher degradation rate than DHDMA under identical reaction conditions because of the additional resonance stabilization of the liberated byproduct, which made it a more responsive cleavable coupling monomer than DHDMA. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3083–3093, 2003     

星形聚氧乙烯及星形杂臂氧化乙烯-苯乙烯共聚物的合成

以原子转移自由基偶联法合成了多臂星形聚合物S-PEO和星形杂臂共聚物PEO-PS。以傅立叶红外光谱(FT-IR)和核磁共振(1H NMR)分析方法确定了产物的结构。以GPC分析测试了产物的分子量和分子量分布。GPC分析结果表明所得聚合物分子量增大,分子量分布窄,偶联反应效率可高达99%以上。