Facile fabrication of hollow silica and titania microspheres using plasma-treated polystyrene spheres as sacrificial templates

By means of a plasma technique, the surfaces of monodisperse polystyrene (PS) colloids have been modified with hydroxyl groups. Using these surface-modified PS colloids as sacrificial templates, we have fabricated silica-coated PS colloids (PS@silica) and titania-coated PS colloids (PS@titania) composite microspheres as well as hollow and mesoporous silica and titania microspheres. This process not only demonstrated a facile, low-cost, environmentally benign way to fabricate hollow oxides structures but also offered a feasible alternative to the preparation of polymer/inorganic oxide composites by templating against the polymer substrate with hydrophobic surfaces.     

Fabrication of mesoporous core-shell structured titania microspheres with hollow interiors

Thermally stable mesoporous core-shell structured titania microspheres with well-defined hollow interiors were directly prepared by a novel hydrothermal precipitation of TiCl4 in the presence of urea and ammonium sulfate.     

Fabrication of polystyrene–PbS core-shell and hollow PbS microspheres with sulfonated polystyrene templates

Uniform inorganic- (PbS) coated polymer core-shell and hollow PbS microspheres were prepared by an easy and economical approach. Monodisperse polystyrene (PS) microspheres were used as templates, as well as the core of the composite spheres; lead sulfide shells were obtained through the reaction of lead acetate (Pb(CH₃COO)₂) and thioacetamide (TAA) at room temperature. The morphologies and structures of the as-synthesized products were systematically characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), and Fourier transform infrared spectra (FTIR). The fluorescence property of the as-synthesized product was also investigated. A reasonable mechanism for the formation of PS–PbS core-shell and hollow PbS microspheres was discussed. According to a series of parallel experiments, effects of related experimental parameters were also carefully investigated, such as the molar ratio of Pb(CH₃COO)₂ to TAA, reaction temperature, etc.     

Double direct templating of periodically nanostructured ZnS hollow microspheres

We introduce a "double direct templating" method for obtaining hollow microspheres with periodically nanostructured walls. Silica or polystyrene colloids are dispersed in a self-assembled hexagonal lyotropic liquid crystal containing precursors for ZnS. The semiconductor ZnS mineralizes on the surface of the colloid, expressing a pore morphology that is a copy of the structure of the liquid crystal. After etching of the sacrificial colloids, hollow capsules with templated and uniform mesoporous shells are obtained.     

Fabrication of macroporous foam and microspheres of polystyrene by Pickering emulsion polymerization

Poly(styrene-co-methacrylic acid) (PS-co-MAA) particles were synthesized via surfactant-free emulsion polymerization and then used as particulate emulsifiers for preparation of Pickering emulsions. Our results showed that adjusting the solution pH can tune the wettability of PS-co-MAA particles to stabilize either water-in-oil (W/O) or oil-in-water (O/W) Pickering emulsions. Stable W/O emulsions were obtained with PS-co-MAA particles at low pH values due to their better affinity to the dispersed oil phase. In contrast, increasing the pH value significantly changed the stabilizing behavior of the PS-co-MAA particles, leading to the phase inversion and formation of stable O/W emulsions. We found that the oil/water ratio had a significant influence on pH value of the phase inversion. It decreased with decreasing the oil/water ratio, and no phase inversion occurred when the styrene volume fraction reduced to 10 %. Additionally, macroporous polystyrene (PS) foam and PS microspheres were obtained via polymerization of Pickering high internal phase emulsion (Pickering HIPE) and O/W Pickering emulsion, respectively.     

Fabrication of hollow titania microspheres with tailored shell thickness

Submicron hollow spheres are an interesting class of materials that receive significant attention nowadays. Closed and mechanically robust homogeneous hollow titania microspheres with as much shell thickness as 130 nm were fabricated by coating polystyrene beads with titania nanoparticles using sol–gel chemistry and subsequently removing the core either via heating or a chemical dissolution process. The thickness of the titania shell deposited on polystyrene core was finely tuned between 100 and 130 nm by varying the concentration of titania precursor, i.e., Ti(OEt)₄ salt from 0.5 to 2 mM during the coating process. The obtained hybrid core–shell particles and hollow microspheres were characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, and thermo-gravimetric analysis. The approach employed is well suited to the preparation of titania-coated polystyrene hybrid particles and hollow titania spheres, which can find their applications as novel building blocks with unique optical properties for fabrication of advanced materials, catalyst, and drug delivery system.     

Fabrication of hollow silica microspheres utilizing a hydrothermal approach

Hollow silica microspheres(HSMSs) have been successfully fabricated via a facile hydrothermal route using D-glucose as the sacrificial template and sodium silicate powder as the silica precursor.The resulting silica hollow particles were characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),X-ray diffraction(XRD),and infrared spectroscopy(IR).The surface area was determined using the BET method.SEM and TEM images exhibited micro-sized silica hollow particles with a size of ~1.5μm.     

Fabrication of polymeric-Laponite composite hollow microspheres via LBL assembly

Hollow structure microspheres with composite polymeric-Laponite shells were prepared by electrostatic self-assembly of Laponite on the polymeric hollow microspheres in this work. The multilayer hydrophilic core/hydrophobic shell polymer latex particles containing carboxyl groups inside were first synthesized via seeded emulsion polymerization, followed by alkali treatment, generating polymeric hollow microspheres. Then, polyethyleneimine (PEI) and Laponite were alternately electrostatic adsorbed on the prepared polymeric hollow microspheres to form polymeric-Laponite composite hollow microspheres. It was indicated that the morphology of alkali-treated microspheres could be tuned through simply altering the dosage of alkali used in the post-treatment process. Along with the increasing of the coating layers, the zeta potential of microspheres absorbed PEI or Laponite approximately tended to be constant respectively, and the thickness of Laponite layer around the hollow microspheres increased clearly, getting more uniform and homogenous. Furthermore, the corresponding polymeric-Laponite hollow microspheres showed high pressure resistance ability compared to the polymeric hollow microspheres.     

Dual latex/surfactant templating of hollow spherical silica particles with ordered mesoporous shells

Hollow spherical silica particles with hexagonally ordered mesoporous shells are synthesized with the dual use of cetyltrimethylammonium bromide (CTAB) and unmodified polystyrene latex microspheres as templates in concentrated aqueous ammonia. In most of the hollow mesoporous particles, cylindrical pores run parallel to the hollow core due to interactions of CTAB/silica aggregates with the latices. Effects on the product structure of the CTAB:latex ratio, the amount of aqueous ammonia, and the latex size are studied. Hollow particles with hexagonally patterned mesoporous shells are obtained at moderate CTAB:latex ratios. Too little CTAB causes silica shell growth without surfactant templating, and too much induces nucleation of new mesoporous silica particles without latex cores. The concentration of ammonia must be large to induce co-assembly of CTAB, silica, and latex into dispersed particles. The results are consistent with the formation of particles by addition of CTAB/silica aggregates to the surface of latex microspheres. When the size and number density of the latex microspheres are changed, the size of the hollow core and the shell thickness can be controlled. However, if the microspheres are too small (50 nm in this case), agglomerated particles with many hollow voids are obtained, most likely due to colloidal instability.     

Preparation of novel magnetic hollow mesoporous silica microspheres and their efficient adsorption

Ordered mesoporous aluminas with high surface areas (up to 783 m²/g), large pore volumes (up to 0.82 cm³/g) and the presence of complementary micropores (up to 0.17 cm³/g) are synthesized with Pluronic® F127 or P123 triblock copolymers in a one-pot synthesis of metal alkoxide, template and cosolvent molecules such as 1,3,5-trimethylbenzene or 1,3,5-triisopropylbenzene in an acidic ethanol solution at 15 °C. Materials are characterized by nitrogen adsorption analysis, small-angle X-ray diffraction and transmission electron microscopy.     

Ag-deposited hollow mesoporous silica microspheres for rapid decolorizing of dye pollutants

Research on Chemical Intermediates - In this paper, we demonstrate a facile electroless plating method for fabricating silver nanoparticles deposited onto hollow mesoporous silica microspheres...     

Fabrication of high-performance supercapacitors based on hollow SnO2 microspheres

Hollow SnO₂ microspheres are prepared from resorcinol–formaldehyde gel and different tin compound precursors, including stannous sulfate (SnSO₄), stannous chloride dihydrate (SnCl₂·2H₂O), and stannic chloride pentahydrate (SnCl₄·5H₂O) via chemically induced self-assembly in hydrothermal environment. Morphological and structural characterizations of as-prepared hollow SnO₂ microspheres are carried out using scanning electron microscopy, X-ray diffraction, and nitrogen adsorption–desorption method. Their electrochemical properties as the supercapacitor electrode materials for application are also investigated using cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) measurement in 1 M H₂SO₄ electrolyte. There are redox peaks in CV curves and a large number of Faradic plateaus in GCD curves. At different scan rates, all the obtained samples have excellent electrochemical properties. The hollow SnO₂ microspheres obtained from SnSO₄ and SnCl₂·2H₂O as precursors show relatively lower specific capacitances of 395 and 347 F g^?1, respectively. However, the specific capacitance of SnO₂ from SnCl₄·5H₂O is up to 663 F g^?1. The high specific surface area and hollow structure of SnO₂ microspheres are due to facilitating the rapid transport of electrolyte ions and improving the electrochemical performance. It is expected that hollow SnO₂ microspheres are the promising redox supercapacitor materials.     

Uniform chitosan hollow microspheres prepared with the sulfonated polystyrene particles templates

Biodegradable chitosan hollow microspheres have been fabricated by employing uniform sulfonated polystyrene (PS) particles as templates. The chitosan was adsorbed onto the surface of the sulfonated polystyrene templates through the electrostatic interaction between the sulfonic acid groups on the templates and the amino groups on the chitosan. Subsequently, the adsorbed chitosan was crosslinked by adding glutaraldehyde. After the removal of the sulfonated polystyrene core, chitosan hollow microspheres were obtained. The longer the sulfonation time used, the smaller the size of the hollow particles and the thicker the chitosan wall obtained. Fourier transform infrared spectrometry was used to characterize the component of the microspheres. The morphologies of the PS templates and the chitosan microspheres were observed by transmission electron microscopy and scanning electron microscopy. The controlled release behavior of the chitosan hollow microspheres was also primarily investigated.     

Synthesis of mesoporous zeolite a by resorcinol-formaldehyde aerogel templating

Mesoporous zeolite A has been synthesized by using a template method with resorcinol-formaldehyde aerogels having three-dimensional mesopores. It was characterized with X-ray powder diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, field emission scanning electron microscopy, thermogravimetric analysis, and nitrogen adsorption/desorption. The pore size distribution calculated from the nitrogen adsorption isotherm is a bimodal distribution with micropores and mesopores. Field emission scanning electron micrograph observations confirm the presence of mesopores.     

Polystyrene-ZnO core-shell microspheres and hollow ZnO structures synthesized with the sulfonated polystyrene templates

Mono-sized sulfonated polystyrene (PS) microspheres were used as templates to prepare PS-zinc oxide (ZnO) core-shell microspheres. Two different hollow ZnO structures were obtained after removing the PS cores by solvent extraction or calcinations. However, we obtained rod-like ZnO by either using unsulfonated PS microspheres as templates or without any templates. Transmission electron microscope (TEM) and scanning electron microscope (SEM) images were used to characterize the structures and morphologies of all the samples. X-ray diffraction (XRD), electron diffraction (ED) and infrared (IR) spectra were, respectively, used to study the crystal structure and composition of samples, respectively.     

pH-Responsive hollow polymeric microspheres and concentric hollow silica microspheres from silica-polymer core-shell microspheres

Nearly monodispersed silica-poly(methacrylic acid) (SiO 2-PMAA) core-shell microspheres were synthesized by distillation-precipitation polymerization from 3-(trimethoxysilyl)propylmethacrylate-silica (SiO 2-MPS) particle templates. SiO 2-PMAA-SiO 2 trilayer hybrid microspheres were subsequently prepared by coating of an outer layer of SiO 2 on the SiO 2-PMAA core-shell microspheres in a sol-gel process. pH-Responsive PMAA hollow microspheres with flexible (deformable) shells were obtained after selective removal of the inorganic SiO 2 core from the SiO 2-PMAA core-shell microspheres by HF etching. The pH-responsive properties of the PMAA hollow microspheres were investigated by dynamic laser scattering (DLS). On the other hand, concentric and rigid hollow silica microspheres were prepared by selective removal of the PMAA interlayer from the SiO 2-PMAA-SiO 2 trilayer hybrid microspheres during calcination. The hybrid composite microspheres, pH-sensitive hollow microspheres, and concentric hollow silica microspheres were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and energy-dispersive X-ray (EDX) analysis.     

Fabrication of anisotropic silica hollow microspheres using polymeric protrusion particles as templates

Anisotropic polystyrene/poly(styrene-co-divinylbenzene) (PS/P(S-DVB)) protrusion particles with various morphologies such as eyeball-like, snowman-like, and raspberry-like were synthesized using a modified seeded polymerization method by dynamically controlling and stabilizing the phase separation. The effects of swelling agent, crosslinker, and monomer concentrations on the particle morphologies were studied. Using the PS/P(S-DVB) protrusion particles as templates, anisotropic silica (SiO₂) hollow microspheres were fabricated facilely. The obtained anisotropic silica hollow spheres had a potential application in rapid waste removal and detoxification extraction with a very simple procedure.     

Photoprocesses in mesoporous silicas prepared by a supramolecular templating approach

Mesoporous solids derived from inorganic–surfactant mesostructured materials have been investigated extensively from both fundamental and practical viewpoints owing to their unusually high surface area and porosity, ordered pore arrangements, pore size uniformity, as well as possible surface engineering. These characteristic features of the mesoporous solids have motivated research to apply them practically. This class of materials was originally expected to find applications as adsorbents and catalysts, while other advanced materials applications such as in optics/electronics became a field of interest after their successful fabrication in controlled morphology. This review article summarizes the studies on the photochemistry and photophysics of guest species occluded in mesoporous silicas in order to highlight the characteristic features of the mesostructured and mesoporous solids and their potential for optical applications.     

Fabrication linalool-functionalized hollow mesoporous silica spheres nanoparticles for efficiently enhance bactericidal activity

To develop a novel food preservation technology for efficiently enhance bactericidal activity in a long term, hollow mesoporous silica spheres (HMSS) with regular nanostructures were applied to encapsulate natural organic antimicrobial agents. The chemical structures, morphologies and thermal stabilities of linalool, HMSS and linalool-functionalized hollow mesoporous silica spheres (L-HMSS) nanoparticles were evaluated by polarimeter, field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), fourier transform infrared (FT-IR), thermal gravimetric analyzer (TGA), nitrogen adsorption-desorption, zeta potential and small angle X-ray diffraction (SXRD). The results show that the linalool was successfully introduced into the cavities of HMSS, and the inorganic host exhibited a high loading capacity of about 1500 mg/g. In addition, after 48 h of incubation, the minimum bactericidal concentrations (MBC) of L-HMSS against Escherichia coli (E. coli), Salmonella enterica (S. enterica) and Staphylococcus aureus (S. aureus), Listeria monocytogenes (L. monocytogenes) were decreased to be 4 (< 5) mg/mL and 8 (< 10) mg/mL, respectively. These results revealed linalool-functionalized hollow mesoporous spheres could efficiently improve the bactericidal activities of the organic component. Furthermore, SEM images clearly showed that L-HMSS indeed had an extremely inhibitory effect against gram-negative (E. coli) and gram-positive (S. aureus) by breaking the structure of the cell membrane. This research is of great significance in the application of linalool in nano-delivery system as well as food industry.