Four novel linear trinuclear assemblies containing bridging triazole ligands. Crystal structure,magnetic, semiconducting and fluorescent properties

Four homotrinuclear linear coordination compounds with bridging ligand of (m-phenol)-1,2,4-triazole, [Mn₃(L)₆(H₂O)₆](ClO₄)₆ (1), [Ni₃(L)₆(H₂O)₆](BF₄)₆·4DMF (2), [Cd₃(L)₆(H₂O)₆](ClO₄)₆· 2H₂O·2DMF·2EtOH (3), [Zn₃(L)₈(H₂O)₄](BF₄)₄(SiF₆)·2EtOH·12H₂O (4), have been synthesized and structurally determined. The structures consist of three metal ions in linear arrangements, linked to each other by two pairs of three N1, N2 bridging triazole ligands. The negative value of J suggests that antiferromagnetic interaction exists in 1. Green fluorescence of 2 and 4 with emissions at 518 nm for 2 and 524 for 4 is possibly assigned to LMCT. The energy gaps of the compounds 2 and 4 are 1.82 and 1.97 eV, respectively, which suggests that the two materials behave as semiconductors.     

Polynuclear lanthanide complexes of a series of bridging ligands containing two tridentate N,N',O-donor units: structures and luminescence properties

A set of three potentially bridging ligands containing two tridentate chelating N,N',O-donor (pyrazole-pyridine-amide) donors separated by an o, m, or p-phenylene spacer has been prepared and their coordination chemistry with lanthanide(III) ions investigated. Ligand L(1) (p-phenylene spacer) forms complexes with a 2:3 M:L ratio according to the proportions used in the reaction mixture; the Ln(2)(L(1))(3) complexes contain two 9-coordinate Ln(III) centres with all three bridging ligands spanning both metal ions, and have a cylindrical (non-helical) 'mesocate' architecture. The 1:1 complexes display a range of structural types depending on the conditions used, including a cyclic Ln(4)(L(1))(4) tetranuclear helicate, a Ln(2)(L(1))(2) dinuclear mesocate, and an infinite one-dimensional coordination polymer in which metal ions and bridging ligands alternate along the sequence. ESMS studies indicate that the 1:1 complexes form a mixture of oligonuclear species {Ln(L(1))}(n) in solution (n up to 5) which are likely to be cyclic helicates. In contrast, ligands L(2) and L(3) (with o- and m-phenylene spacers, respectively) generally form dinuclear Ln(2)L(2) Ln(III) complexes in which the two ligands may be arranged in a helical or non-helical architecture about the two metal ions. These complexes also contain an additional exogenous bidentate bridging ligand, either acetate or formate, which has arisen from hydrolysis of solvent molecules promoted by the Lewis-acidity of the Ln(III) ions. Luminescence studies on some of the Nd(III) complexes showed that excitation into ligand-centred pi-pi* transitions result in the characteristic near-infrared luminescence from Nd(III) at 1060 nm.     

A strategy for improving the room-temperature luminescence properties of Ru(II) complexes with tridentate ligands

Several ruthenium(II) complexes with new tridentate polypyridine ligands have been prepared, and their photophysical properties have been studied. The new tridentate ligands are tpy-modified systems (tpy = 2,2':6',2' '-terpyridine) in which aromatic substituents designed to be coplanar with the tpy moiety are introduced, with the aim of enhancing delocalization in the acceptor ligand of the potentially luminescent metal-to-ligand charge-transfer (MLCT) state and increasing the MLCT-MC energy gap (MC = metal-centered excited state). Indeed, the Ru(II) complexes obtained with this new family of tridentate ligands exhibit long-lived luminescence at room temperature (up to 200 ns). The enhanced luminescence properties of these complexes support this design strategy and are superior to those of the model Ru(tpy)22+ compound and compare favorably with those of the best Ru(II) complexes with tridentate ligands reported so far.     

Aromatic polyaminocarboxylate ligands for energy transfer luminescence measurements of lanthanide ions in aqueous solutions

The promising ligand candidates for the energy transfer luminescence measurements of lanthanide (Ln) chelates on aqueous matrices are first proposed. The ligands are; 2[(2-amino-5-methyl-phenoxy)methyl]-6-methoxy-8-aminoquinoline-N,N,N',N'-tetraacetate (Quin 2), 1,2-bis(2-amino-phenoxy)ethane-N,N,N',N'-tetraacetate (BAPTA), and 1,2-bis(2-amino-5-fluoro-phenoxy)ethane-N,N,N',N'-tetraacetate (F-BAPTA). The Ln-chelates of these aromatic polyaminocarboxylates show the sensitized emission which results from efficient ligand-centered light absorption, and the interesting selectivity is seen; BAPTA and F-BAPTA form the luminescent chelates only with Tb(III) and Dy(III) ions, whereas the emission from Sm(III) and Eu(III) ions is greatly sensitized with Quin 2. The sufficient emission intensity can be obtained even in slightly alkaline aqueous solutions without any addition of surfactants or organic solvents. These octadentate ligands are fairly capable of shielding central Ln ions from quenching by surrounding water molecules. The luminescence enhancement factors are 1600 for Tb(III) ion with BAPTA (em.544 nm) and 1380 for Eu(III) ion with Quin 2 (em. 615 nm), respectively, being relative to their aqueous chloride solutions.     

Design, microwave-assisted synthesis, and photophysical properties of small molecule organic antennas for luminescence resonance energy transfer

A highly efficient microwave-assisted method was successfully developed for the synthesis of a library of carbostyril analogues. The reaction time for synthesis of carbostyril analogues was drastically reduced from a reported 18-58 h to only 80 min. Compounds obtained directly from each synthesis were more than 90% pure and did not require any further purification. On the basis of the fluorescence spectra of the compounds in the initial library, four carbostyril analogues were designed. Two of these analogues showed very favorable fluorescence profiles and have the potential to be used as small molecule organic antennas for LRET studies.     

Iron catalysis for the synthesis of ligands: Exploring the products of hydrophosphination as ligands in cross-coupling

Catalytic hydrophosphination is a useful technique for the synthesis of phosphines, however, the phosphine products have been little exploited as ligands in catalysis. We have selected three phosphines prepared by iron catalyzed hydrophosphination and used them as ligands in a series of cross-coupling reactions: Heck, Suzuki-Miyaura and Buchwald-Hartwig. Rather than limit the chemistry to simple cross-coupling partners which are almost guaranteed to perform well in these transformations, industrially relevant substrates which are challenging from and electronic and/or steric perspective, along with substrates which contain several heteroatoms, were explored in order to gauge the true potential of these phosphine ligands.     

Homo- and heteropolynuclear platinum complexes stabilized by dimethylpyrazolato and alkynyl bridging ligands: synthesis, structures, and luminescence

This work describes the synthesis of cis-[Pt(C[triple bond]CPh)2(Hdmpz)2] (1) and its use as a precursor for the preparation of homo- and heteropolynuclear complexes. Double deprotonation of compound 1 with readily available M(I) (M = Cu, Ag, Au) or M(II) (M = Pd, Pt) species affords the discrete hexanuclear clusters [{PtM2(mu-C[triple bond]CPh)2(mu-dmpz)(2)}(2)] [M = Cu (2), Ag (3), Au (4)], in which both "Pt(C[triple bond]CPh)2(dmpz)(2)" fragments are connected by four d(10) metal centers, and are stabilized by alkynyl and dimethylpyrazolate bridging ligands, or the trinuclear complexes [Pt(mu-C[triple bond]CPh)2(mu-dmpz)(2){M(C/\P)}2] (M = Pd (5), Pt (6); C/\P = CH(2)-C(6)H(4)-P(o-tolyl)2-kappaC,P), respectively. The X-ray structures of complexes 1-4 and 6 are reported. The X-ray structure of the platinum-copper derivative 2 shows that all copper centers exhibit similar local geometry being linearly coordinated to a nitrogen atom and eta(2) to one alkynyl fragment. However in the related platinum-silver (3) and platinum-gold (4) derivatives the silver and gold atoms present three different coordination environments. The complexes have been studied by absorption and emission spectroscopy. The hexanuclear complexes exhibit bright luminescence in the solid state and in fluid solution (except 4 in the solid state at 298 K). Dual long-lived emission is observed, being clearly resolved in low-temperature rigid media. The low-energy emission is ascribed to MLM'CT Pt(d)/pi(C[triple bond]CPh)-->Pt(p(z))/M'(sp)/pi*(C[triple bond]CPh) modified by metal-metal interactions whereas the high-energy emission is tentatively attributed to an emissive state derived from dimethylpyrazolate-to-metal (d(10)) LM'CT transitions pi(dmpz)-->M'(d(10)).     

A tetraphenylmethane based dendritic tolan-anthracene dyad: synthesis and energy transfer properties

In order to synthesize a peripherally rigid dendritic donor-acceptor dyad for energy transfer studies, a tritolan dendron based on a tetraphenylmethane scaffold was prepared from New Fuchsin. The dendron showed a small degree of homoconjugation but a large hypochromic effect. Coupling of two such dendrons with an anthracene core led to a dendritic tolan-anthracene dyad whose steady state photophysical studies (UV, PL, PLE) showed vectorial transfer of excitation energy from the surface tolan units to the anthracene core.     

First dinuclear B(II) monocations with bridging guanidinate ligands: synthesis and properties

Reaction between the diborane (4) B2Cl2(NMe2)2 and Li(hpp) (hpp-=1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidinate) leads to [(Me2N)B(mu-hpp)] 2. This species can be protonated by HCl.OEt2 to give [(Me2HN)B(mu-hpp)]2Cl2 featuring two B(II) cations with direct B-B bonding. The unsymmetrical monocation [(Me2N)B2(mu-hpp)2(NHMe2)]+ is also obtained. [(Me2HN)B(mu-hpp)]2Cl2 eliminates NHMe2 in a slow reaction leading to [ClB2(mu-hpp)2(NHMe2)]Cl and ultimately, presumably, to [ClB(mu-hpp)]2. We report the crystal structures of the two monocations [ClB2(mu-hpp)2(NHMe2)]Cl and [(Me2N)B2(mu-hpp)2(NHMe2)]Cl. The experimental results are accompanied by some quantum chemical density-functional theory calculations.     

A sandwich-type POM containing mixed cations: synthesis,thermal performance and proton-conducting properties

A new sandwich-type polyoxometalate, Na₅H[N(CH₃)₄]₂[Co(C₃N₂H₄)₂(H₂O)₄][Co₄(H₂O)₂(PW₉O₃₄)₂]·21H₂O (1), has been synthesized. 1 is composed of a Weakley-type polyanion, [Co₄₍H₂O)₂(PW₉O₃₄)₂]^10?, four kinds of cations (five Na⁺, two [N(CH₃)₄]⁺, one [Co(C₃N₂H₄)₂(H₂O)₄]²⁺, and one H⁺), and 21 crystalline H₂O molecules. The surface oxygen of the polyanion in 1, the crystalline water, and coordinated water molecules make an extended 3-D hydrogen-bonding network. Alternating current (AC) impedance experiments of 1 reveal good proton conductivity for 1 of 5.03 × 10^??4 S cm^?1 at 25 °C under 98% relative humidity (RH). Activation energy of 1 calculated from Arrhenius plots is 0.358 eV, indicating Grotthuss mechanism is dominant in the proton transfer. Thermal decomposition behavior of 1 was examined by thermogravimetry/mass spectrometry (TG/MS) measurements.     

A two‐dimensional zinc(II) coordination polymer based on mixed dimethyl succinate and bipyridine ligands: synthesis,structure, thermostability and luminescence properties

From the viewpoint of crystal engineering, the construction of crystalline polymeric materials requires a rational choice of organic bridging ligands for the self‐assembly process. Multicarboxylate ligands are of particular interest due to their strong coordination activity towards metal ions, as well as their various coordination modes and versatile conformations. The structural chemistry of dicarboxylate‐based coordination polymers of transition metals has been developed through the grafting of N‐containing organic linkers into carboxylate‐bridged transition metal networks. A new luminescent two‐dimensional zinc(II) coordination polymer containing bridging 2,2‐dimethylsuccinate and 4,4′‐bipyridine ligands, namely poly[[aqua(μ₂‐4,4′‐bipyridine‐κ²N:N′)bis(μ₃‐2,2‐dimethylbutanedioato)‐κ⁴O¹,O^1′:O⁴:O^4′;κ⁵O¹:O¹,O⁴:O⁴,O^4′‐dizinc(II)] dihydrate], {[Zn₂(C₆H₈O₄)₂(C₁₀H₈N₂)(H₂O)]·2H₂O}_n, has been synthesized under hydrothermal conditions and characterized by single‐crystal X‐ray diffraction and elemental, IR and thermogravimetric analyses. In the structure, the 2,2‐dimethylsuccinate ligands link linear tetranuclear Zn^II subunits into one‐dimensional chains along the c axis. 4,4′‐Bipyridine acts as a tethering ligand expanding these one‐dimensional chains into a two‐dimensional layered structure. Hydrogen‐bonding interactions between the water molecules (both coordinated and free) and carboxylate O atoms strengthen the packing of the layers. Furthermore, the luminescence properties of the complex were investigated. The compound exhibits a blue photoluminescence in the solid state at room temperature and may be a good candidate for potential hybrid inorganic–organic photoactive materials.     

An iterative strategy for the synthesis of oligothiophenes by catalytic cross-coupling reactions

An iterative strategy for the synthesis of new sulfur-functionalized oligothiophenes by Suzuki or Stille cross-coupling reactions was applied to the reaction of 4-bromo-tert-butylphenylthioether with thiophene derivatives. The planarity of the oligothiophenes obtained was confirmed by the single-crystal X-ray structure analysis of 2-(4′-tert-butylthiophenyl)thiophene, which shows a potentially large electronic conjugation length. © 2004 Wiley Periodicals, Inc. Heteroatom Chem 15:121–126, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10224     

W/Cu(Ag)/S complexes containing bridging diphosphine ligands: Synthesis,structures and optical properties

The substitution reactions of [Et₄N]₂[WOS₃MCN] (M = Cu, Ag) with dppe (dppe = 1,2-bis(diphenylphosphino) ethane) in DMF afforded a tetranuclear cluster [Et₄N]₂[WOS₃Cu(dppe)]₂ · H₂O (1) and a polymer [WEE′S₂Ag(dppe)]₂ · CH₃CN (3) (E = 0.636S + 0.364O, E′ = 0.581O + 0.419S), respectively. Treatment of 1 with AgI at elevated temperature yielded polymeric complex [WS₄Cu₂(dppe)₂]_n (2). X-ray single crystal structural analyses revealed that in both 1 and 2, the W/Cu/S cluster units are linked by two dppe ligands to form a 10-membered [–Cu–P–C–C–P–]₂ ring. In the polymeric structure of 2, the W and Cu atoms form a helical chain whereas in 3 the cluster units (WEE′S₂Ag) are bridged by dppe ligands affording a zig-zag chain structure. The optical absorption spectra and the solid-state photoluminescent properties of the title complexes are also studied.     

A heteronuclear compound of ruthenium and silver containing bridging tris(pyridyl)methanoate ligands

The reaction of [{Ru(η⁶-C₆H₆)Cl(μ-Cl)}₂] with Py₃COH in ethanol results in the formation of the cation [Ru(η⁶-C₆H₆)(N,N′,O,-(C₅H₄N)₃CO)]⁺ which is isolated as its hexafluorphosphate salt 1. The cation acts as a ligand towards other transition metal ions. With Ag⁺ the hetero-trinuclear complex [{Ru(η⁶-C₆H₆)((C₅H₄N)₃CO)}₂Ag][PF₆]₃ 2 is formed, while reaction with [Pd(PhCN)₂Cl₂] gives the bimetallic [Ru(η⁶-C₆H₆)((C₅H₄N)₃CO)PdCl₂][PF₆] 3. Both compounds were fully characterised by spectroscopic methods and the trinuclear complex was additionally characterised by X-ray diffraction.     

A new class of iridium complexes suitable for stepwise incorporation into linear assemblies: synthesis, electrochemistry, and luminescence

A new family of cationic iridium(III) complexes is reported that contain two cyclometalating terdentate ligands. The complex [Ir(N--C--N-dpyx)(N--N--C-phbpy)]+ (1) contains one N--C--N-coordinating ligand, cyclometalating through the central phenyl ring, and one N--N--C-coordinated ligand, cyclometalated at the peripheral phenyl ring [dpyxH = 1,3-di(2-pyridyl)-4,6-dimethylbenzene; phbpyH = 6-phenyl-2,2'-bipyridine]. This binding mode dictates a mutually cis arrangement of the cyclometalated carbon atoms: the complexes are thus bis-terdentate analogues of the well-known [Ir(N--C-ppy)2(N--N-bpy)]+ family of complexes, which similarly contain a cis-C2N4 coordination environment. The dpyx ligand can be brominated regioselectively at the carbon atom para to the metal under mild conditions. Starting from a modified complex, [Ir(N--C--N-dpyx)(N--N--C-mtbpy-phi-Br)]+ (2), which incorporates a pendent bromophenyl group, a sequential cross-coupling-bromination-cross-coupling strategy can be applied for the stepwise introduction of aryl groups into the ligands, using in situ palladium-catalyzed Suzuki reactions with arylboronic acids [mtbpyH-phi-Br = 4-(p-bromophenyl)-6-(m-tolyl)bipyridine]. Dimetallic complexes 6 and 7 have similarly been prepared by a palladium-catalyzed reaction of complex 2 with 1,4-benzenediboronic acid and 4,4'-biphenyldiboronic acid, respectively. All five monometallic complexes and both dimetallic systems are luminescent in solution, emitting around 630 nm in MeCN at 298 K, with quantum yields in the range of 0.02-0.06, superior to [Ir(ppy)2(bpy)]+. The luminescence, electrochemistry, and singlet-oxygen-sensitizing abilities of the new family of complexes are discussed in the context of the tris-bidentate analogues and related bis-terdentate compounds that contain a trans arrangement of cyclometalated carbon atoms.     

Intramolecular energy transfer in a tetra-coumarin perylene system: influence of solvent and bridging unit on electronic properties

The synthesis and characterisation of a novel coumarin donor-perylene bisimide acceptor light-harvesting system is reported, in which an energy-transfer efficiency of >99% is achieved. Comparison of the excited-state properties of the donor-acceptor system with model compounds revealed that although the photophysical properties of the perylene bisimide acceptor unit are affected considerably by the nature of the substituent at the imide positions and the solvent employed, through-bond interaction between the donor and acceptor units is negligible. Energy transfer in the present system can be described as occurring via a through-space energy-transfer mechanism. Careful consideration of the redox properties of the donor relative to the acceptor units allows for avoidance of potentially deleterious excited-state electron-transfer processes.     

New europium coordination polymers with efficient energy transfer from conjugated tetracarboxylate ligands to Eu3+ ion: syntheses, structures, luminescence and magnetic properties

Two novel lanthanide coordination polymers, [Eu(2)(EBTC)(DMF)(5)(NO(3))(2)]·DMF (1) and [Eu(2)(BBTC)(1.5)(CH(3)OH)(2)(H(2)O)(2)]·7DMF·HNO(3) (2) (EBTC(4-) = 1,1'-ethynebenzene-3,3',5,5'-tetracarboxylate; BBTC(4-) = 1,1'-butadiynebenzene-3,3',5,5'-tetracarboxylate), were successfully synthesized from conjugated ligands of EBTC(4-) and BBTC(4-). Although the two tetracarboxylate ligands have similar structures, their different rigidity/flexibility results in quite different networks upon complexation. Complex 1 has a two-dimensional (2-D) layered structure with two crystallographically independent Eu(3+) ions, one in a distorted monocapped square-antiprism and the other in a distorted square-antiprism coordination geometry. Complex 2 exhibits a three-dimensional (3-D) porous framework, with one type of Eu(3+) in a distorted square-antiprism and the other in a trigondodecahedron environment. Both 1 and 2 emit the intensely red characteristic luminescence of Eu(3+) ion at room temperature, with a long lifetime of up to 1.3 and 0.7 ms, respectively, during which the ligand emission of EBTC(4-)/BBTC(4-) was quenched by the Eu(3+) ion, indicating the existence of efficient energy transfer between the conjugated ligand of EBTC(4-)/BBTC(4-) and the Eu(3+) ion. Thus, both EBTC(4-) and BBTC(4-) are ideal ligands with an "antenna" effect for the Eu(3+) ion. The two complexes show the single-ion magnetic behaviors of Eu(3+) with strong spin-orbit coupling interactions even if there are shorter distances (5.714 ? for 1 versus 4.275 and 5.360 ? for 2) between the neighboring Eu(3+) ions connected by oxygen atoms of the tetracarboxylates.     

Synthesis and structural characterization of dicobalt–iron clusters containing bridging diphosphine ligands

Reaction of (μ ₃-S)FeCo₂(CO)₉ with N-substituted bis(diphenylphosphanyl)amine Ph₂PN(R)PPh₂ (R?=?CH₂CH₂CH₃, A; CH₂Ph, B) at room temperature in CH₂Cl₂ afforded dicobalt–iron cluster complexes (μ ₃-S)FeCo₂(CO)₇[Ph₂PN(R)PPh₂] (R?=?CH₂CH₂CH₃, 1; CH₂Ph, 2) in 75% and 66% yields, respectively. 1 and 2 were characterized by elemental analysis and spectroscopy. In addition, the molecular structures of A, 1, and 2 were determined by single crystal X-ray diffraction analysis.