Spectrophotometric determination of boron in complex matrices by isothermal distillation of borate ester into curcumin

In situ distillation of borate ester into the curcumin solution has been developed for the spectrophotometric determination of boron in a variety of complex matrixes. A polypropylene vessel containing the sample solution was placed inside a vessel (PP) containing 10 ml of curcumin solution and the distillation was carried out at room temperature/on a water bath. The borate ester collected in to the curcumin solution was evaporated to dryness on the water bath, taken in acetone and the absorbance was measured at 550 nm. In situ distillation of borate ester directly into the chromogenic reagent eliminates tedious sample treatment (before and/or after borate separation), use of methanol, complicated quartz set up, possible loss of boron and reduces the analysis time significantly. In situ dehydration of sample solution by ethanolic vapour in the absence of dehydrating acid prevents the formation of fluoborate and co-distillation of potential anionic interferents (nitrate and fluoride). This developed method has been applied for the determination of traces of boric acid in boron powder by the distillation of methyl borate at room temperature. For other matrixes (water, uranium oxide, uranyl nitrate, fluoride salt, etc.) distillation of ethyl borate was carried out on the water bath. LOD (3σ) was 5 ng g⁻¹ for water and 30 ng g⁻¹ for solid samples.     

Volatilization of methyl borate in iron matrix. Determination of boron in steel by ICP atomic emission spectrometry

A rapid and reliable method for the determination of boron by ICP-AES in steels is described. The procedure is based on a discontinuous generation of methyl borate, in concentrated sulphuric acid and phosphoric acid medium, after injecting 45 microl of methanol in 20 microl of sample. The gaseous methyl borate and excess methanol are fed into the ICP torch via the intermediate tube by a flow of 430 ml/min Ar carrier gas, without disturbing the discharge. This work simplifies drastically the existing methodology of boron analysis in steels. Acid-soluble boron has been determined, but acid-insoluble boron can also be determined. The determination is carried out without iron interferences, with a reproducibility of 1.90% r.s.d. for a concentration of 20 microg/ml, and an absolute detection limit of 20 ng of total boron, working with a solution volume of 20 microl.     

Simultaneous determination of potassium nitrate and sodium monofluorophosphate in dentifrices by single column ion chromatography

The simultaneous determination of potassium nitrate and sodium monofluorophosphate in dentifrices by single column ion chromatography is described. Nitrate and monofluorophosphate are extracted from the dentifrice with deionized water and separated by a low capacity anion separator column with 0.2% sodium benzoate (adjusted to pH 5.8 +/- 0.1 with formic acid) as the mobile phase. A conductivity meter is used for concentration measurements. The method has been applied to commercial dentifrices containing both potassium nitrate and sodium monofluorophosphate. The mean recoveries for potassium nitrate and monofluorophosphate from spiked samples were 99.0% and 99.2%, respectively, with corresponding standard deviations of 1.73% and 2.55%. The minimum detectable concentration is 5 micrograms/ml for both nitrate and monofluorophosphate.     

Fluorimetric determination of boron at microgram level

The synthesis, characterization and application of 2-(2-hydroxybenzylidenimine)benzene-arsonic acid (HBBA) as a reagent for the fluorimetric determination of boron are described. This reagent reacts with boric acid in 85% w/w sulphuric acid medium to yield a fluorescent compound. The reagent is not fluorescent in those conditions. Heating at 90 degrees for 45 min is needed for the compound to be formed. The linear calibration range is 0.1-8 microg/ml in the solution measured. The detection limit of the method is 0.01 microg/ml. The method has been applied to determine boron in vegetal material.     

Determination of small amounts of boron by radiation decomposition of chloroacetic acid solution

For the determination of boron in the mug/g range in aqueous solution by activation analysis an indirect method is proposed, based on the liberation of chloride ions from chloroacetic acid by the primary reaction (10)B(n, alpha)(7)Li. The sample solution, to which is added 0.01-0.5M choroacetic acid, is irradiated with reactor neutrons. The concentration of the chloride ions liberated from the chloroacetic acid is directly proportional to the boron content of the irradiated sample. It is determined potentiometrically with a chloride-sensitive electrode. By this method boron contents >/= 10(-5) g can be detected with good reproducibility. Interference from other ionic species has been investigated and can be neglected. The method is suitable for the determination of boron in biological matrices.     

Method for the biological monitoring of hexahydrophthalic anhydride by the determination of hexahydrophthalic acid in urine using gas chromatography and selected-ion monitoring.

A method for the determination of hexahydrophthalic acid, a metabolite of hexahydrophthalic anhydride, in human urine has been developed. The urine was worked-up by liquid-solid extraction, esterified with boron trifluoride-methanol, and analysed by capillary gas chromatography and selected-ion monitoring. Hexadeuterium-labelled hexahydrophthalic acid was used as the internal standard. The precision was 4% at 0.7 microgram/ml and 5% at 0.07 microgram/ml. The recovery of the acid for the overall method was 101% at 0.07 micrograms/ml of urine (with a coefficient of variation of 4%) and 95% at 0.7 microgram/ml (coefficient of variation 2%). The limit of detection was 20 ng/ml urine.     

Synthesis of 2,4-Dihydroxybenzaldehyde-Isonicotinylhydrazone and Its Fluorescence Reaction with Aluminium

A new fluorescent reagent, 2,4-dihydroxybenzaldehyde-isonicotinylhydrazone (DHBI), is synthesized and characterized by elemental analysis and infrared spectra (KBr disks). The fluorescent reaction of aluminium(III) with the new reagent has been studied. The fluorescent excitation and emission wavelengths of the complex are at 394 and 484 nm, respectively. The optimum pH range is 4.2–4.6; hence the pH is controlled in the optimum interval with a buffer solution (sodium formate–formic acid) of pH 3.3. The linear range of the method is 0–6 μg/25 ml. The molar ratio of aluminium to reagent is found to be 1:1. The proposed method has been used for the determination of trace aluminium in drinking water and edible bicarbonate of sodium with satisfactory results.     

Spectrophotomhtric Determination of Vanadium with Salicylic Acid in Formic Acid Medium

Abstract

A method is described for the spectrophotometric determination of vanadium by measuring its colored complex with salicylic acid in formic acid medium. Lambert-Beer's law is followed in the range of 2.0 - 32.0 μg V/ml of the final solution. Thirty-six ions were tested and did not interfore, at the established conditions.     

Separation of palladium from simulated intermediate radioactive waste/chloroacetic acid/nitrate medium by IRA-410 and IRA-900 anion exchangers

Separation of palladium by strongly basic anion exchangers IRA-110 and IRA-900 from intermediate radioactive liquid waste in chloroacetic acid/nitrate medium containing thirteen elements have been achieved. Different conditions have been studied, the effect of NaNO₃ as salt content, chloroacetic acid and hydrogen ion concentration have been investigated. Selective recovery of palladium from the [ILLW] solution was achieved using the column technique. The selectivity increased by using chloroacetic acid/nitrate than in nitrate medium. The elution of palladium was carried out via reduction with formic acid where the rate of the reduction process was increased by decreasing the formic acid concentration till 50% followed by dissolving the separated palladium by nitric acid.     

液相色谱-串联质谱法测定牛奶中5种多肤类抗生素

建立了牛奶中杆菌肽、粘杆菌素A、粘杆菌素B、维吉尼霉素和万占霉素5种多肽类抗生素的反相液相色谱-串联质谱(HPLC-MS/MS)检测方法.牛奶样品经甲醇-0.1%甲酸水提取后,用4%三氯乙酸乙睛除蛋白,液-液萃取后,采用0.1%甲酸(A)和0.1%甲酸乙腈(B)作为流动相进行梯度洗脱.质谱(ESI+)采用多离子检测模式...     

1-(2,3,4-Trihydroxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid as reagent for spectrophotometric determination of boron in plants

A highly sensitive and selective method has been developed for spectrophotometric determination of boron in plants, the method based on the color reaction of new reagent 1-(2,3,4-trihydroxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid (THBA) with boron (III). In an ammonium acetate solution of pH 8.0, boron(III) reacts with THBA to form a 1:2 yellow complex which has a maximum absorption peak at 430 nm. The reaction can complete within 90 min and the absorbance of the complex remains maximum and almost constant at least for 24 h under a temperature range from 0 to 35 °C. The apparent molar absorptivity and Sandell's sensitivity are 2.95 × 10⁴ l mol⁻¹ cm⁻¹ and 0.00036 ng cm⁻², respectively. The limit of quantification, limit of detection and relative standard deviations were found to be 5.1, 1.5 ng ml⁻¹ and 1.12%, respectively. Under the optimum conditions, the absorbency of the complex (λ_max = 430 nm) increases linearly with concentration up to 0.8 μg ml⁻¹ of boron(III). The influences of foreign ions on the determination of boron were investigated in detail. Most of foreign ions can be tolerated in considerable amounts. Experiments have indicated that THBA as chromogenic reagent for spectrophotometric determination of boron has excellent analytical characteristics. Its sensitivity is more than 4.2-fold that of azomethine-H, and stability is advantage over other derivatives of azomehine-H remarkably. Moreover, the synthesis of THBA and its physicochemical properties of THBA were also investigated in detail. Proposed method has been applied to the determination of boron in plants with satisfactory results.     

Simultaneous determination of sildenafil, vardenafil and tadalafil as forbidden components in natural dietary supplements for male sexual potency by high-performance liquid chromatography-electrospray ionization mass spectrometry

A high-performance liquid chromatographic method coupled with ultraviolet detection and electrospray ionization mass spectrometry (HPLC-UV-ESI-MS) was developed for simultaneous determination of banned additives-sildenafil, vardenafil and tadalafil in dietary supplements for male sexual potency. The separation was achieved on a C18 column with acetonitrile and aqueous solution (20 mmol ammonium acetate, 0.2% formic acid) as mobile phase at a flow rate of I ml/min with a linear gradient program. UV detection was at 292 nm. Identification of drugs was accomplished using ESI-MS. Good linearity between response (peak area) and concentration was found over a concentration range of 0.8-80 microg/ml for sildenafil; 2.25-225 microg/ml for vardenafil; and 1.1-110 microg/ml for tadalafil, with regression coefficient is better than 0.999. The recovery of the method ranged from 93.3 to 106.1%, and the relative standard deviation varied from 2.0 to 5.6% (n = 6). The method has been successfully applied to the analysis of practical samples of natural dietary supplements.     

氟化电热蒸发／等离子体原子发射光谱直接测定植物试样中硼的研究

本文提出了用聚四氟乙烯悬浮体制样电热蒸发－ＩＣＰ－ＡＥＳ直接测定植物试样中新方法，研究了上述元素在该技术中的粒度效应，基效应和存在下的蒸发行为，在优化的实验条件下，本法测定Ｂ的检出限为１．２ｎｇ／ｍｌ，ＲＳＤ为４．２％，该法有简便，灵敏和分析前试样无需进行化学处理的优点，已应用于生物试样的直接测定，分析结果与参考值吻合。     

非抑制型电导检测离子排斥色谱法分析有机酸

本文以对甲苯磺，酸加硼酸作为淋洗液，采用非抑制型电导检测，研究了离子排斥色谱法分离和检测苹果酸，抗坏血酸，乳酸，琥珀酸，甲酸，乙酸，丙酸等有机酸的色谱条件，并进行了实际样品的分析。     

Ag/TiO2光催化还原硝酸氮

利用化学还原法制备不同Ag掺杂量TiO₂纳米催化剂,采用TEM、XRD、XRF和UV-Vis对催化剂进行表征。考察了催化剂在紫外光(254 nm)和可见光照射下还原初始浓度100 mgN·L^-1水相硝酸氮的活性和效果。重点考察了紫外光照射下Ag掺杂量、不同空穴捕获剂(甲酸、甲醇、乙酸、乙醇、草酸、草酸钠等)及甲酸浓度对硝酸氮还原的影响;对硝酸氮转化率和总氮去除率、形成亚硝酸氮、氨氮浓度及氮气选择性的影响。甲酸浓度为0.030 mol·L^-1、Ag掺杂量为1.0wt%时催化剂效果最佳。此时,硝酸氮、总氮的转化率分别为98.43%、78.13%;亚硝酸氮浓度为零,转化的硝酸氮中只有20.76%转化为氨氮,氮气选择性为79.24%。可见光下进行光催化还原反应时,硝酸氮转化率仅37.98%,但氮气的选择性较高。     

Flow injection spectrophotometric determination of boron in ceramic materials

A flow injection spectrophotometric method for the determination of boron in ceramic materials is described. The method is based on spectrophotometric measurement of the decrease in the pH produced by the reaction between boric acid and mannitol in the presence of an acid-base indicator. A bichannel FI (flow injection) manifold in which the sample solutions were injected into deionized water (at pH 5.4) and the stream was later merged with the reagent stream (a mannitol solution containing 1x10(-4) mol l(-1) bromocresol green at pH 5.4), was used. Transient signals were monitored at 616 nm. A theoretical model which describes the dependence between the absorbance values and boric acid concentration is presented. The model predicts a non linear dependence between the absorbance or increment in absorbance and the boric acid concentration. In contrast, the model predicts a linear dependence between the inverse of the absorbance values and the boric acid concentration. The calibration graphs (1/A vs mug ml(-1) B(2)O(3)) were linear over the range 1-30 mug ml(-1) of B(2)O(3). The relative standard deviations were 0.7 and 0.4% for 4 and 8 mug ml(-1) of B(2)O(3), respectively. The limit of detection was 0.02 mug ml(-1) of B(2)O(3) (3sigma criterium). The method was used to determine boron in nine ceramic materials with very different nominal boron compositions. The results were compared with those obtained using a potentiometric titration method as reference method. No significant differences (at 95% probability level) were found between the proposed and reference methods. The method is rapid, reliable, precise and free of interferences.     

Sensitive liquid chromatographic-tandem mass spectrometric method for the determination of fluoxetine and its primary active metabolite norfluoxetine in human plasma

A sensitive method for the simultaneous determination of fluoxetine and its major active metabolite norfluoxetine in plasma was developed, using high-performance liquid chromatographic separation with tandem mass spectrometric detection. The samples were extracted from alkalised plasma with hexane-isoamyl alcohol (98:2, v/v) followed by back-extraction into formic acid (2%). Chromatography was performed on a Phenomenex Luna C18 (2) 5 microm, 150x2 mm column with a mobile phase consisting of acetonitrile-0.02% formic acid (340:660, v/v) at a flow-rate of 0.35 ml/min. Detection was achieved by a Perkin-Elmer Sciex API 2000 mass spectrometer (LC-MS-MS) set at unit resolution in the multiple reaction monitoring mode. TurbolonSpray ionisation was used for ion production. The mean recoveries for fluoxetine and norfluoxetine were 98 and 97%, respectively, with a lower limit of quantification set at 0.15 ng/ml for the analyte and its metabolite. This assay method makes use of the increased sensitivity and selectivity of mass spectrometric (MS-MS) detection to allow for a more rapid (extraction and chromatography) and sensitive method for the simultaneous determination of fluoxetine and norfluoxetine in human plasma than has previously been described.     

Flow injection spectrophotometric determination of boron in plant material with azomethine-H

A simple, fast method for the determination of boron in plant extracts is described. The method utilizes injection of 1.0 ml of an acid plant digest into a 0.1 M hydrochloric acid stream, with further addition of a buffer—masking solution and azomethine-H as the colour-forming reagent. Effects of pH, kinetics of colour reaction development, sample volume, reagent composition and interferences are described. The proposed method allows the analysis of plant extracts with boron contents in the range 0.1–6.0 ppm at a rate of 60 determinations per hour, with a reagent consumption of 2 mg of azomethine-H per sample. The precision is good (r.s.d. < 1%) and the results agree with those obtained by the curcumin method.     

1-(2-hydroxy-3-methoxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid as a reagent for the spectrophotometric determination of boron in ceramic materials

A sensitive and selective spectrophotometric method for the determination of boron is described. The method is based on the colour reaction between boron and the reagent 1-(2-hydroxy-3-methoxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid (HMOA). In a HOAc-NH4OAc buffer of pH 5.5, HMOA reacts with boron to form a 1:2 yellow complex with a maximum absorption at 423 nm. The absorbance (lambdamax = 423 nm) is linear up to 1.2 microg ml(-1) boron in aqueous solution with a repeatability (RSD) of 1.12%. The molar absorptivity and Sandell's sensitivity are 7.19 x 10(3) l mol(-1) cm(-1) and 0.0015 microg cm(-2), respectively. The limit of quantification and limit of detection were found to be 17.1 and 5.2 ng ml(-1), respectively. The interference of various ions was examined in detail. All the metal ions studied can be tolerated in considerable amounts; in particular, the tolerance limits of Fe, Al, Zn, Ca and Mg are superior to those of other reagents such as Azomethine-H and Azomethine-HR. The proposed method was applied to the determination of boron in ceramic materials with satisfactory results.     

Boron-Doped PdCuAu Nanospine Assembly as an Efficient Electrocatalyst toward Formic Acid Oxidation

Control of the composition and morphology of Pd-based electrocatalysts is a promising strategy for the development of efficient direct formic acid fuel cells. Herein, a two-step method is presented for the design of B-doped PdCuAu nanospine assemblies (B-PdCuAu NAs) using NaBH₄ as the boron dopant. The boron content can be tailored easily by tuning the reaction time, and an optimal boron content is beneficial to promote the formic acid oxidation reaction. Such B-PdCuAu NAs exhibit superior mass and specific activities to commercial Pd black and PdCuAu NAs in alkaline solution. The excellent catalytic performance of B-PdCuAu NAs may arise from the increase in surface active sites and the electronic effect of boron modification. This work provides a facile synthesis of the B-doped metallic catalysts and highlights the boron modification in improving their performance as anode electrocatalysts for fuel cells.