High-power tunable terahertz generation from a surface-emitted THz-wave parametric oscillator based on two MgO:LiNbO3 crystals

A high-powered tunable terahertz wave (THz-wave) has been parametrically generated via a surface-emitted THz-wave parametric oscillator (TPO) pumped by a multi-longitudinal-mode Q-switched Nd:YAG laser. The effective parametric gain length was enlarged by employing two MgO:LiNbO₃ crystals. The tunable THz-wave radiation from 0.8 to 2.8 THz was realized via varying phase-matching angle between the pump wave and the Stokes wave. The maximum THz-wave radiation was 173.9 nJ/pulse at 1.7 THz as the pump energy was 82 mJ, corresponding to an energy conversion efficiency of about 2.12 × 10⁻⁶ and a photon conversion efficiency of about 0.035%. The first-order, the second-order and the third-order Stokes waves were observed during the experiments.     

小型化外腔可调谐THz参量振荡器

基于LiNbO3晶体垂直表面输出技术,设计了一台小型化外腔THz参量振荡器。利用小型化灯1064 nm脉冲激光器泵浦MgO:LiNbO3,通过优化设计三波非共线相位匹配的光学参量振荡腔结构,实现THz垂直晶体表面输出,减少LiNbO3晶体对THz波的吸收,提高了THz波输出光束质量。当在泵浦光能量为128 mJ、重复频率为10 Hz时,获得THz波的调谐范围为0.69~3.01 THz,在1.6 THz处获得THz波最大平均功率为10.8 W,脉冲宽度为10 ns,对应THz波能量转换效率为8.4310-6。     

Excimer ArF laser with an output energy of 1.3 J at 2.0% efficiency on the He:Ar:F2 mixture

In this paper it is shown that to achieve a maximum efficiency and high output energy of an ArF (193 nm) excimer laser, one should use optimal pump intensity. It has been shown experimentally that the optimal pump intensity for an ArF excimer laser with the mixture of He:Ar:F₂ has a value of 4.5–5.0 MW/cm³. The results of an experimental study of the pump and active medium parameters effect on the efficiency and output energy of the ArF excimer laser on the mixture of He:Ar:F₂ are presented. To provide high pump intensity of an active medium, the excitation scheme of the LC-inverter type has been used where the current return conductor inductance had been increased from 30 to 80 nH. This allows the pump to achieve levels of intensity above 5.0 MW/cm³. By using the pump intensity of 5.0 MW/cm³ in an active medium of He:Ar:F₂–79.7:20:0.3 at total pressure of 2.4 atm, we are the first to obtain the output energy of 1.3 J at the total efficiency of 2.0%. The pulse duration (FWHM) was 15±1 ns and the peak pulse power was 85 MW. PACS 42.55.Lt; 42.60.Lh     

Generation of high average power 1 kHz shaped THz pulses via optical rectification

Generation of near single-cycle THz pulses from lithium niobate with 3.3 μJ energy, 3.3 mW average power, 1.2 THz central frequency and 4 MW peak power was demonstrated by tilting the intensity front of the pump pulses from a 1 kHz Ti:sapphire laser. THz pulse intensity as high as 200 MW/cm² was achieved. The energy conversion efficiency was 7 × 10⁻⁴. The capability of the present scheme to generate high energy shaped THz pulses was also demonstrated by using a sequence of optical pump pulses.     

High-power diode-end-pumped CW Nd:GdVO4 laser

We report on a high-power diode-end-pumped CW Nd:GdVO₄ laser. Under the pump power of 39.5 W, a maximum output power of 19.8 W and a slope efficiency of 58.5% were obtained. The beam quality M² at maximum output power was measured to be around 2.62. The thermal focal length in Nd:GdVO₄ crystal under the pump power from 22 to 40.6 W was measured. The pump-induced damage threshold was estimated to be 28.6 kW/cm².     

Simulation of THz emission from laser interaction with plasmas

One-dimensional particle-in-cell (PIC) program is used to simulate the generation of high power terahertz (THz) emission from the interaction of an ultrashort intense laser pulse with underdense plasma. The spectra of THz radiation are discussed under different laser intensity, pulse width, incident angle and density scale length. High-amplitude electron plasma wave driven by a laser wakefield can produce powerful THz emission through linear mode conversion under certain conditions. With incident laser intensity of 10¹⁸ W/cm², the generated emission is computed to be of the order of several MV/cm field and tens of MW level power. The corresponding energy conversion efficiency is several ten thousandths, which is higher then the efficiency of other THz source and suitable for the studies of THz nonlinear physics.     

Noncascading THz-wave parametric oscillator synchronously pumped by mode-locked picosecond Ti:sapphire laser in doubly-resonant external cavity

A noncascading terahertz (THz) wave parametric oscillator synchronously pumped by a mode-locked picosecond Ti:sapphire laser whose average power was less than 1 W was demonstrated with a noncollinear phase-matching MgO:LiNbO₃ crystal in an external enhancement cavity doubly resonant for both pump (780 nm) and signal (781-784 nm) waves. In the external cavity, in which the pump wave enhanced so as to reduce the pumping threshold of parametric processes, the signal wave could also resonate and thus be enhanced simultaneously, resulting in a THz wave output at approximately 0.9 THz as the idler wave. The novel dual enhancement of pump and signal waves reduced the threshold pumping intensity to approximately 50 MW/cm², which was much lower than that of a conventional externally pumped THz wave parametric oscillator with a crystal.     

Investigation of pump-wavelength dependence of terahertz-wave parametric oscillator based on LiNbO3

This paper investigates the performances of terahertz-wave parametric oscillators(TPOs) based on the LiNbO 3 crystal at different pump wavelengths.The calculated results show that TPO characteristics,including the frequency tuning range,the THz-wave gain and the stability of THz-wave output direction based on the Si-prism coupler,can be significantly improved by using a short-wavelength pump.It also demonstrates that a long-wavelength-pump allows the employment of a short TPO cavity due to an enlarged phase-matching angle,that is,an increased angular separation between the pump and oscillated Stokes beams under the THz-wave generation at a specific frequency.The study provides an useful guide and a theoretical basis for the further improvement of TPO systems.     

Efficient diode-pumped Nd:GGG laser operation at 933.6 and 937.3 nm

CW laser emission on the quasi 3-level (⁴F_3/2→⁴I_9/2) transition in Nd:GGG is reported for different pump focusing and resonator dimensions. A nearly hemispherical plano-concave resonator led at 937.3 nm to a maximum output power of 4.1 W for an incident pump power of 21.7 W, thus corresponding to a slope efficiency of about 23.5%. Laser operation was also obtained for the first time around 933.6 nm by using a glass etalon for frequency selection with a maximum output power of 2.3 W and a slope efficiency of 16% with respect to the incident pump power. Dual-wavelength operation (around 933.6 and 937.3 nm), which offers a potential source to generate THz radiation, is also reported.     

Parametric oscillation of high-power 3-THz pulse by synchronously pumped ZnGeP<Subscript>2</Subscript> crystal: Computer simulation

Possible parametric oscillation of 3-THz pulse at synchronous pumping of the ZnGeP₂ crystal by a train of short second-harmonic pulses from the CO₂ laser has been analyzed. Calculation shows that at changing laser pulse duration τ between 4 and 500 ps and correspondingly pumping energy density (0.5–3.5 J cm⁻²) THz pulse peak power varies from 3 to 70MW with maximum at τ =9 ps.     

Diode-pumped Yb:Y<Subscript>2</Subscript>SiO<Subscript>5</Subscript>-LiB<Subscript>3</Subscript>O<Subscript>5</Subscript> cyan laser at 501.7 nm

We describe the output performances of the 928 nm ⁴ F _3/2 → ⁴ I _9/2 transition in Nd:CLNGG under diode-laser pumping. An end-pumped Nd:CLNGG crystal yielded 1.3 W of continuous-wave output power for 17.8 W of absorbed pump power. The slope efficiency with respect to the absorbed pump power was 11.2%. Furthermore, with 17.8 W of diode pump power and the frequency-doubling crystal LiB₃O₅ (LBO), a maximum output power of 260 mW in the blue spectral range at 464 nm has been achieved. The blue output power stability over 4 h is better than 3.2%.     

Diamond Schottky Contact Transit-time Diode for Terahertz Power Generation

A diamond mixed tunneling and avalanche transit-time diode is designed in this letter. Schottky contact is used in this kind of diode to reduce the contact resistance. Electrical characteristics of n-type diamond Schottky contact have been accurately investigated. Total output power of such transit-time diode is evaluated using an accurate large-signal model. The results indicate that the new type transit-time diode can operate with the frequency up to several terahertzes. The output power density is more than 1.185 MW/cm² from 1.07 to 2.12THz. About 17% improvement in efficiency is found at 2.12THz.     

Continuous wave laser operation of Yb<Superscript>3+</Superscript>:YVO<Subscript>4</Subscript>

We have demonstrated the continuous wave laser operation of Yb³⁺:YVO₄. For Ti:Al₂O₃ laser pumping at 985 nm, a maximum slope efficiency of 41.1% and a threshold pump power of 76 mW were obtained. The maximum output power was 433 mW at a laser wavelength of 1037 nm.Using a cw diode laser around 974 nm as a pump source, a slope efficiency of 10.9% and a maximum output power of 152 mW were achieved at a laser wavelength of 1039 nm. The laser threshold pump power was 608 mW with respect to the absorbed pump power. The effective emission cross-sections for the ²F_5/2²F_7/2 transition were determined using the Füchtbauer–Ladenburg equation. The maxima of the effective absorption and emission cross-sections were found at 984.5 nm (6.74×10^-20 cm²) in -po larization and 985.5 nm (4.28×10^-20 cm²) also in -p olarization. The upper laser level lifetime was measured with suppression of radiation trapping and is around 318 s. PACS 42.55.Rz; 42.55.Xi; 42.70.Hj     

20-Hz operation of an eye-safe cascade Raman laser with a Ba(NO3)2 crystal

Operation of a 1.598-μm eye-safe third-Stokes Raman laser with a Ba(NO₃)₂ crystal pumped by a 1.064-μm Nd:YAG laser is described. We observed a substantial decrease in the output energy during the first 50 s of the continuous operation at 20 Hz. The energy drop is ∼76% of the initial third-Stokes output. We confirmed negative thermal lensing and thermally induced birefringence in the crystal. With a concave cavity mirror at a matched curvature to the thermal lensing, we obtained an output energy of 11 mJ at 20 Hz. TEM₀₀ output was also obtained with a smaller pump-beam diameter with a highest conversion efficiency of 15.5% for a pumping power of only 45 MW/cm² (0.9 J/cm²). Received: 20 November 2001 / Revised version: 20 February 2002 / Published online: 2 May 2002     

Analysis of THz-wave surface-emitted difference-frequency generation in periodically poled lithium niobate waveguide

It was shown that the periodically poled LiNbO₃-waveguide with period of poling λ≈λ/n_g (λ is the wavelength of emitted THz-wave, n_g is a refractive index corresponding to optical group velocity) emits THz-wave difference-frequency generation (DFG) in the direction normal to the surface of the planar waveguide. The 5% distinction between the manufactured and required periods of gratings results only in a small deflection (∼6°) of the output THz-beam from the normal direction. The dependence of DFG efficiency on mode size is analyzed. The output THz power at λ=150 μm is estimated as 2 mW, taking into account imperfections in coupling incident beams with guided modes. It was shown that the efficiency of THz-wave DFG in surface-emitting geometry is more than for collinear geometry in bulk crystal, especially in the high-absorption wavelength region. Received: 16 May 2001 / Revised version: 13 August 2001 / Published online: 2 November 2001     

High-power and efficiency continuous-wave operation of <Emphasis Type="Italic">a</Emphasis>-cut Ho:YAP laser at room temperature

We report the continuous-wave (CW) operation of a room-temperature a-cut Ho:YAP laser resonantly end-pumped by a diode-pumped Tm:YLF laser at 1.91 μm. A maximum CW output power of 14.6 W at 2118.7 nm for a-oriented Ho:YAP was obtained, corresponding to the slope efficiency of 69.35% and optical-to-optical conversion efficiency of 63.04% with respect to absorbed pump power. The laser operated at a single mode (TEM₀₀) with the beam quality factor of M ² ∼ 1.51.     

Generation of nanosecond terahertz pulses by the optical rectification method

The possibility of the generation of quasi-cw terahertz radiation by the optical rectification method for broad-band Fourier unlimited nanosecond laser pulses has been experimentally demonstrated. The broadband radiation of a LiF dye-center laser is used as a pump source of a nonlinear optical oscillator. The energy efficiency of terahertz optical frequency conversion in a periodically polarized lithium niobate crystal is 4 × 10⁻⁹ at a pump power density of 7 MW/cm².     

X-ray preionized CO2 laser

A short pulse (100 ns) high-energy x-ray source has been used to preionize a transversely excited carbon dioxide gas discharge laser of 600 cm³ active volume. The maximum output power of 60 MW in a 50 ns FWHM pulse was achieved from a CO₂–N₂–He–CO–Xe static gas mixture at 600 Torr pressure. The energy conversion efficiency was 6%.     

Diode-laser-array end-pumped 14.3-W CW Nd:GdVO4 solid-state laser at 1.06 μm

A diode-laser-array end-pumped efficient CW Nd:GdVO₄ laser at 1.06 μm has been developed. A low-order-mode output power of 14.3 W was obtained at the maximum available pump power of 26 W, giving an optical conversion efficiency of 55% and an average slope efficiency of 62%. The laser output beam quality factor at full pump power was determined to be M²<1.8. It is also shown that only lightly doped Nd:GdVO₄ crystals are suitable for high-power end-pumped lasers. Received: 4 May 1999 / Published online: 29 July 1999     

Continuous-wave high-power Nd:YAG-KNbO3 laser at 473 nm

A continuous-wave high-power Nd:YAG laser operating on the ⁴F_3/2→⁴I_9/2 transition at 946 nm and intracavity frequency-doubled to 473 nm by a KNbO₃ nonlinear crystal at room temperature is reported. The Nd:YAG laser outputs a randomly polarized beam of 3.8 W maximum power (38% optical-to-optical efficiency and 44% slope efficiency with respect to the absorbed pump power) at the 946 nm fundamental wavelength. Intracavity frequency-doubling with a 2.0-mm thick KNbO₃ crystal in a linear resonator yielded 159-mW single-ended blue-output with 4.8% optical-to-optical conversion efficiency versus the absorbed pump power. The 473-nm maximum power of 418 mW with 11.6% optical-to-optical conversion efficiency in absorbed power was obtained from a V-type resonator; the overall optical-to-optical conversion efficiency was 6.7%, while the conversion of the available infrared power reached 50%.