复合纤维素固定化脲酶对铜离子的吸附作用

脲酶对重金属离子极为敏感。由复合纤维素（CC）固定化脲酸对铜离子的吸附现象得出的结论是：脲酶吸附的Cu~(2+)总量与其活性没有定量关系，而是与固酶重量成比例。从而可以认为，重金属离子不是直接作用于脲酶活性部位使其中毒的，很可能是作用于脲酶大分子其他部位，使分子构象变形后导致脲酶失活的。由于CC固酶对Cu~(2+)有吸附作用，且又不污染系统，所以可用其除去食品、药物及水中的Cu~(2+)离子。     

固定化脲酶的制备及应用

以壳聚糖作为载体,戊二醛作为交联剂对脲酶进行固定化。固定化的最适条件为:酶的偶联时间60min,戊二醛浓度0.5%,pH值7.0。对游离及固定化脲酶的酶学性质研究表明,酶促反应的最适pH均为7.0,最适温度分别为33℃和70℃。米氏常数分别为29.8mmol/L和13.9mmol/L。与游离酶相比,固定化酶的热稳定性和贮存稳定性更佳。应用固定化酶测定了试样中的微量组分。     

以醋酸纤维素吸水胶囊为载体制备固定化脲酶

把高吸水材料封在具超滤功能的醋酸纤维素（CA）皮膜中，制成胶囊。此胶囊浸泡在脲酶水溶液中，水分受高吸水材料的吸引透过皮膜进入胶囊中，脲酶被截留在CA皮膜上，并且与CA上的活性基团相结合，形成CA胶囊固定化脲酶。     

磁性壳聚糖微球用于酶的固定化研究*Ⅲ磁性壳聚糖微球的活化及其对脲酶的固定化研究

以环氧氯丙烷活化的磁性壳聚糖微球作为载体,对脲酶进行固定化研究。结果表明, 在25℃时, 活化磁性壳聚糖微球对脲酶的固定化在2h时就达到了最大值,固定化酶和自由酶的最适温度都在65℃左右,自由酶和固定化酶的米氏常数Km值分别为0.042mol/L和0.008mol/L,固定化酶的Km降低了5倍。     

醋酸纤维素膜固定化脲酶的研究

酶固定膜反应器兼具有反应和分离两种功能,是酶工程领域中较活跃的研究课题.随着酶固定化技术和水平的提高,各种固定化酶生物反应器不断涌现,其中以采用固定化脲酶技术制作的人工肾最为成功.     

固定化脲酶的制备及酶学性质研究

固定化酶是束缚在一定空间内仍能进行其特有反应的生物催化剂,近年来对于固定化酶的研究非常活跃[1-2].目前酶的固定化方法主要有吸附法,交联法,包埋法以及化学共价法,这些方法各有特点[3-5],应用领域多为食品工业、制药、医学治疗等方面.     

胺基化壳聚糖微球上染料的吸附平衡和动力学

采用胺基化壳聚糖微球作为吸附剂,对三种阴离子偶氮染料——甲基橙MO[MethylOrange],活性艳红RR2[ReactiveRed2]和直接黑DB19[DirectBlack19]进行吸附,对此过程的吸附平衡和吸附动力学进行了研究。结果表明,三种染料的吸附体系是以物理吸附为主,兼有化学吸附,属多层吸附;二级速率方程描述三种染料在胺基化壳聚糖微球上的吸附行为比较贴切。     

磁性壳聚糖微球用于酶的固定化研究：Ⅲ磁性壳聚糖微球的活化及其对脲酶的固化研究

以环氧氯丙烷活化的磁性壳聚糖微球作为载体、对脲酶进行固定化研究,结果表明,在25℃时,活化磁性壳聚糖微球对脲酶的固定化在2h时就达到了最大值,固定化酶和自由酶的最适温度都在65℃左右,自由酶和固定化酶的米氏常数Km值分别为0．042mol/L和0．008mol/L,固定化酶的Km降低了5倍。     

壳聚糖固定化脲酶的制备和废水中的尿素分析

流动注射;尿素测定;壳聚糖固定化脲酶的制备和废水中的尿素分析     

交联壳聚糖多孔微球对染料的吸附平衡及吸附动力学分析

研究了交联壳聚糖多孔微球对染料的吸附平衡规律,探讨了染料溶液在不同的初始浓度、pH值及不同吸附剂用量条件下吸附动力学规律及吸附动力学控制机理。结果表明,壳聚糖微球对染料的吸附规律可较好地符合Langmuir吸附等温式,吸附动力学模型可以用表观二级速率方程来描述。     

Kinetic of Adsorption of Urea Nitrogen onto Chitosan Coated Dialdehyde Cellulose under Catalysis of Immobilized Urease

The adsorption of urea nitrogen onto chitosan coated dialdehyde cellulose (CDAC) under catalysis of immobilized urease in gelatin membrane (IE) was studied in batch system. The pseudo first-order and second-order kinetic models were used to describe the kinetic data, and the rate constants were evaluated. The experimental data fitted well to the second-order kinetic model.     

Determination of Serum Urea with an Enzyme Thermistor Using Immobilized Urease

Abstract

The application of an enzyme thermistor device in a simple and accurate procedure for the determination of serum urea is described. The enzyme thermistor measures the heat produced when urea is passed through a small column containing immobilized urease. The stability and sensitivity as well as the performance with clinical serum samples of the system is evaluated. Advantages are the simplicity, the low enzyme cost and the insensitivity to the optical properties of the sample and interfering substances, which may affect the commonly used assay procedures.     

Theoretical,Equilibrium, Kinetics and Thermodynamic Investigations of Methylene Blue Adsorption onto Lignite Coal

The interaction of methylene blue (MB) dye with natural coal (collected from coal landfills of the Kosovo Energy Corporation) in aqueous solutions was studied using adsorption, kinetics, and thermodynamic data, and Monte Carlo (MC) calculations. In a batch procedure, the effects of contact duration, initial MB concentration, pH, and solution temperature on the adsorption process were examined. The Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich (D–R) isotherms were used to examine the equilibrium adsorption data. The equilibrium data fit well to the Freundlich and Langmuir adsorption isotherm models; however, the Freundlich model suited the adsorption data to a slightly better extent than the Langmuir model. The kinetics experimental data was fitted using pseudo-first-order, first-order, pseudo-second-order, second-order, Elvoich equation, and diffusion models. The pseudo-second-order rate model manifested a superlative fit to the experimental data, while the adsorption of MB onto coal is regulated by both liquid film and intraparticle diffusions at the same time. Thermodynamic parameters, such as Gibbs free energy (ΔG⁰), enthalpy (ΔH⁰), and entropy (ΔS⁰) were calculated. The adsorption of MB was confirmed to be spontaneous and endothermic. The theoretical results were in agreement with the experimental ones.     

Adsorption Equilibrium and Kinetics of Egg-White Proteins on Immobilized Metal Ion Affinity Gels for Designing Fractionation

Designing an Immobilized Metal ion Affinity (IMA) chromatographic process on large scale demands a thorough understanding to be developed regarding the adsorption behaviour of proteins on metal loaded IMA (IMA-M(II)) gels and the characteristic adsorption parameters to be evaluated. This research investigation illustrates the significance of these aspects for the proposed fractionation of chicken egg-white proteins on these gels. Consequently, a systematic investigation of the adsorption characteristics of three chicken egg-white proteins viz., ovalbumin, conalbumin and lysozyme on Cu(II) and Ni(II) loaded IMA gels, iminodiacetate (IDA) and tris(2-aminoethyl)amine (TREN), has been undertaken. These gels differ in their selectivity towards the proteins of interest under the identical sets of experimental conditions. While TREN-Ni(II) was selective only for lysozyme, IDA-Cu(II), IDA-Ni(II) and TREN-Cu(II) showed varying affinities for all the three proteins. The equilibrium and kinetic data were analysed using various theoretical models and adsorption parameters were quantified. On the basis of these investigations, various strategies have been proposed for the efficient large-scale fractionation of chicken egg-white proteins on these gels.     

聚硫醚纤维素吸附阳离子染料的动力学与热力学

脱脂棉在碱存在下与环硫氯丙烷发生醚化反应,合成了一种环境功能材料--聚硫醚纤维素（PTCC）。 考察了溶液酸度对吸附容量的影响并研究了PTCC对3种阳离子染料的吸附动力学与热力学。 研究结果表明,中性介质较有利于吸附的进行;298 K、pH=7.0时,静态吸附2 h后,吸附趋于平衡,PTCC对碱性艳蓝B、碱性艳蓝R和夜蓝的饱和吸附量分别为726、652和320 mg/g;PTCC对阳离子染料的吸附过程符合Lagergren二级吸附动力学方程,吸附速率常数k2随着温度的降低而升高,低温有利于吸附反应的进行;吸附过程ΔG、ΔH和ΔS均为负值,表明该吸附是自发的放热过程,主要是通过范德华力实现的。 吸附过程的吸附等温模型符合Langmuir等温式,可以用单分子层吸附理论加以解释。     

Structural Changes and Activation of Cellulose by Caustic Soda Solution with Urea

Investigations on the activation of cellulose by mixed solutions of caustic soda and urea are reported. The structural effects of those solutions on various dissolving pulps are studied by ¹³C-CP/MAS-NMR spectroscopy. In a series of steeping lyes, the concentration of NaOH was varied in a range from 0% to 8% and the urea-concentration in a range from 15% to 40% at ambient temperature and −25 °C. Using solely the single NaOH or urea solutions in the concentration ranges given above, no or only minor structural changes were found. In contrast to that, the cellulose I structure was partially or completely destroyed by using the bicomponent solution with urea added to caustic soda. The structural effect of the bicomponent solutions is comparable with the effect of solely caustic soda solutions of approx. 10% to 18% NaOH. However, the ¹³C-CP/MAS-NMR-spectra from the bicomponent pretreated samples indicate a structure different from the usual ordered structures of sodium cellulose I or II, namely a special urea-NaOH-cellulose complex. The results show that for cellulose activation the NaOH concentration of the caustic soda can be remarkably reduced by adding urea. The improved activating effect of an optimized caustic soda solution with added urea was proved to be useful for the synthesis of cellulose carbamate.     

聚硫醚型纤维素的合成及其吸附性能

稻壳纤维素;氯甲基硫杂丙环;金属离子;聚硫醚型纤维素的合成及其吸附性能     

On the Adsorption of Some Catechol Derivatives from Aqueous Solutions onto Activated Carbon Cloth: Equilibrium and Kinetic Studies

The removal of some of pollutants including catechol, 3-methylcatechol, 3-methoxycatechol, and 2,3-dihydroxybenzoic acid by adsorption onto activated carbon cloth (ACC) at 35.0 ± 0.1°C was investigated. The equilibrium experimental data were fitted to Langmuir, Freundlich, Temkin, Langmuir-Freundlich, and Redlich-Peterson isotherms. Also the kinetic experimental data were fitted to the pseudo-first-order and pseudo-second-order kinetic models. It was found that the pseudo-second-order model describes the kinetic of adsorption better than the other one. By comparing the obtained results with the previously reported data, it can be concluded that ACC is a high efficient adsorbent for removal of phenolic compounds from aqueous solutions.