Anion-Exchange-Driven Disassembly of a SiO(2)/CTAB Composite Mesophase: the Formation of Hollow Mesoporous Silica Spheres

Silica-based surfactant/inorganic composite mesophases have been extremely studied. In this work, we developed a mild method to realize the room-temperature disassembly of a SiO(2)/cetyltrimethylammonium bromide (CTAB) mesophase in a neutral medium. Using KMnO(4) as a typical etching agent, SiO(2)/CTAB mesophase spheres were partially disassembled into normal or rattle-type hollow structures. The disassembly of the SiO(2)/CTAB spheres was supposed to be driven by anion exchange between permanganate and silicate ions. This unique method makes possible the selective etching of a SiO(2)/CTAB mesophase over a SiO(2) phase.     

Studies in the phase behavior of the microemulsions formed by mixed cationic and nonionic surfactants

The middle-phase behavior for the systems of cetyltrimethylammonium bromide (CTAB)/poly-ethyleneglycol-9-monododecyl ether (AEO₉)/alcohol/oil/brine and CTAB/octylphenolpolyoxyethylene-10-ether (Triton X-100)/alcohol/oil/brine have been studied with ɛ-β fishlike phase diagram method. The interfacial layer composition was determined, and some significant physicochemical parameters are derived from the hydrophilic-lipophilic balance plane equation. The effects of different alcohols, oils, temperature and inorganic salt (NaCl) on the middle-phase behavior of microemulsion formed by composite CTAB/AEO₉ systems were also investigated systematically. The effects of different factors on the phase behavior of microemulsions formed by CTAB/AEO₉ and CTAB/TX-100 systems were compared. The results suggest that the solubilization of CTAB/AEO₉ microemulsion is higher than that of CTAB/TX-100 system under the same conditions.     

憎水性金纳米粒子的制备、表征与形貌控制

在十六烷基三甲基溴化铵(CTAB)或十八胺(C18NH2)/正庚烷/乙醇/HAuCl4.4H2O W/O型微乳液体系中,利用简单的加热手段通过乙醇还原法制备了具有不同形貌和尺寸的憎水性金纳米材料。由CTAB或C18NH2稳定的金纳米颗粒运用紫外可见光谱(UV-vis)、透射电镜(TEM)和X射线衍射(XRD)等分别进行了表征和分析。用混合表面活性剂(CTAB/C18NH2)替代单一表面活性剂(CTAB)可以削弱CTAB对金纳米晶体生长的导向作用并提高粒子的单分散性。     

Phase behavior, interfacial composition and thermodynamic properties of mixed surfactant (CTAB and Brij-58) derived w/o microemulsions with 1-butanol and 1-pentanol as cosurfactants and n-heptane and n-decane as oils

Phase diagrams of pseudo-quaternary systems of cetyltrimethylammonium bromide (CTAB)/polyoxyethylene(20)cetyl ether (Brij-58)/water/1-butanol (or 1-pentanol)/n-heptane (or n-decane) at fixed omega (=[water]/[surfactant]) of 55.6 were constructed at different temperatures (293, 303, 313, and 323 K) and different mole fraction compositions of Brij-58 (X(Brij-58)=0, 0.5, and 1.0 in CTAB + Brij-58 mixture). Pure CTAB stabilized systems produced larger single-phase domains than pure Brij-58 stabilized systems. Increasing temperature increased the single-phase domain in the Brij-58 stabilized systems, whereas the domain decreased in the CTAB stabilized systems. For mixed surfactant systems (with X(Brij)=0.5) negligible influence of temperature in the studied range of 293 to 323 K on the phase behavior was observed. Interfacial compositions of the mixed microemulsion systems at different temperature and different compositions were evaluated by the dilution method. The n(a)(i) (number of moles of alcohol at the interface) and n(a)(o) (number of moles of alcohol in the oil phase) determined from dilution experiments were found to decrease and increase respectively for CTAB stabilized systems, whereas an opposite trend was witnessed for Brij-58 stabilized systems. The energetics of transfer of cosurfactants from oil to the interface were found to be exothermic and endothermic for CTAB and Brij-58 stabilized systems, respectively. At equimolar composition of CTAB and Brij-58, the phase diagrams were temperature insensitive, so that the enthalpy of the aforesaid transfer process was zero.     

Inclusion Complex of β-cyclodextrin with CTAB in Aqueous Solution

Cetyltrimethylammonium bromide (CTAB)/potassium bromide (KBr) micellar system has been used as a viscosity probe to study the inclusion complexation between β-cyclodextrin (β-CD) and CTAB. Viscosity measurements show that the inclusion complexation between β-CD and CTAB may cause the breakdown of CTAB/KBr wormlike micelles, resulting in the decrease of the solution viscosity. The viscosity minimum at C_β-CD/C_CTAB=2 indicate the molecular ratio of host molecule to guest molecule is 2:1 in the β-CD/CTAB inclusion complex.     

Synthesis of a three-dimensional cubic mesoporous silica monolith employing an organic additive through an evaporation-induced self-assembly process

We demonstrate a robust approach to the synthesis of a 3D cubic Im3m mesoporous silica monolith from SiO2/cetyltrimethylammoniumbromide (CTAB)/1,3,5-triisopropylbenzene (TIPB) sols having molar compositions of 1SiO2/0.0017HCl/5.2H2O/10EtOH/0.10CTAB/0.1-0.5TIPB by the evaporation-induced self-assembly (EISA) process. The addition of TIPB is aimed at altering the micelle geometry to spheroid from rodlike in the gel state; the change in micelle geometry leads to the formation of a 3D cage-type cubic mesostructure in the monolith. The synthesized materials exhibit BET surface areas of 800-1000 m(2)/g, a BJH pore diameter of 2.9-4.3 nm, and a pore volume of 0.7-1.0 cm(3)/g, demonstrating ultrahigh porosity of the 3D cubic mesostructure.     

甲基丙烯酸3-磺酸丙酯钾盐苯乙烯共聚物负离子与N,N,N-三甲基十六烷基溴化铵相互作用研究

聚电解质与表面活性剂相互作用研究已有很多报道[1～4],由于在很多方面与生物膜中脂质体-蛋白质间相互作用相似,从而近年来备受关注[5～6].作为带电荷的水溶性高分子,聚电解质与带相反电荷的表面活性剂分子可以形成规整性非常好的聚电解质表面活性剂复合物.Ａｎｔｏｎｉｅｔｔｔｉ等报道聚丙烯酸与十六烷基三甲基溴化铵(ＣＴＡＢ)形成规整的介规相(Ｍｅｓｏｐｈａｓｅ)聚电解质表面活性剂复合物结构[7],漆宗能等在同一体系既观察到了热致液晶也观察到了溶致液晶[8].在研究甲基丙烯酸3磺酸丙酯钾盐(ＳＰＭＳ)的苯乙烯(Ｓｔ)共聚物(Ｐ(ＳＰＭ…     

Spontaneous vesicles, disks, threadlike and spherical micelles found in the solubilization of DMPC liposomes by the detergent DTAC

Iron oxide/MCM-41 nanocomposites, Fe(2)O(3)/MCM-41, containing 5%, 10%, and 20% (w/w) iron oxide, were prepared via a direct nonhydrothermal method at room temperature. The preparations were preformed by using iron(III) nitrate, tetra-ethoxysilane (TEOS), and cetyltrimethylammonium bromide (CTAB) mixed or unmixed with dodecyltrimethylammonium bromide (DTAB). The produced materials were dried and calcined at 550 °C for 3 h. Test materials were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), N(2) gas adsorption/desorption isotherms, small angle and wide angle X-ray diffraction (XRD). Results indicate that mixing of CTAB with DTAB does not harm the formation of blank MCM-41 structure. For the composite Fe(2)O(3)/MCM-41 materials, results showed formation of more stable MCM-41 structure with higher surface area and improved porosity in the presence of mixed (CTAB+DTAB) than in the presence of single (CTAB) surfactants for up to 10% Fe(2)O(3)/MCM-41 (w/w). This was explained in terms of the effect DTAB on contraction of the template micellar size to compensate for the expected size expansion upon the addition of ionic iron(III) nitrate precursor. Highly dispersed Fe(2)O(3) nanoparticles were formed in all cases even with the highest iron oxide percentage. Formation of the nanocomposites was postulated to be determined by fast nucleation and slow growth of iron oxide species, which facilitated formation of well dispersed iron oxide nanoparticles inside and on the wall of the MCM-41 material.     

Compositional effects on electrophoretic and chromatographic figures of merit in electrokinetic chromatography with cetyltrimethylammonium bromide/sodium octyl sulfate vesicles as the pseudostationary phase. Part 1: effect of the phase ratio

The effect of the phase ratio on the electrophoretic and chromatographic properties of unilamellar vesicles comprised of cetyltrimethylammonium bromide (CTAB) and sodium octyl sulfate (SOS) was investigated in EKC. The surfactant concentration of the vesicles was 0.9, 1.2, 1.5, and 1.8% w/v, with a mole ratio of 1:3.66 (CTAB/SOS). Results were compared to those obtained using SDS micelles at concentrations of 1.0% (w/v, 35 mM) and 1.5% (52 mM). The CTAB/SOS vesicles (0.9-1.8% w/v) provided a significantly larger elution range (5.7 < or = t(ves)/t(0) < or = 8.7) and greater hydrophobic (methylene) selectivity (2.8 < or = alpha(CH2) < or = 3.1) than SDS micelles (3.1 < or = t(mc)/t(0) < or = 3.3; alpha(CH2) = 2.2). Whereas the larger elution range can be attributed to the 25% reduction in EOF due to the interaction of unaggregated CTAB cations and the negatively charged capillary wall, the higher methylene selectivity is likely due to the lower concentration of water expected in the CTAB/SOS vesicle bilayer compared to the Palisades layer of SDS micelles. For a given phase ratio, CTAB/SOS vesicles are somewhat less retentive than SDS micelles, although retention factors comparable to those observed in 1.0-1.5% SDS can be obtained with 1.5-1.8% CTAB/SOS. A linear relationship was observed between phase ratio and retention factor, confirming the validity of the phase ratio model for these vesicles. Unique polar group selectivities and positional isomer shape selectivities were obtained with CTAB/SOS vesicles, with both types of selectivities being nearly independent of the phase ratio. For four sets of positional isomers, the elution order was always para < ortho < meta. Finally, the thermodynamics of solute retention was qualitatively similar to that reported for other surfactant aggregates (micelles and microemulsions); the enthalpic contribution to retention was consistently favorable for all compounds, whereas the entropic contribution was favorable only to hydrophobic solutes.     

Detecting DNA targets through the formation of DNA/CTAB complex and its interactions with liquid crystals

In this paper, we report the formation of a DNA/cetyl trimethylammonium bromide (CTAB) complex on a solid surface and its interaction with a thin layer of liquid crystals (LC) supported on the surface. Our results show that when the surface is decorated with DNA only, the LC gives a bright image, but when the surface is decorated with the DNA/CTAB complex, the LC becomes dark when the surface density of CTAB is above 5.25 ± 0.13 × 10(13)/cm(2). To exploit this phenomenon for detecting DNA targets, we used a surface decorated with electroneutral PNA probes for capturing DNA targets, and then treated the surface with 0.1 mM of CTAB. In the presence of DNA targets, a PNA/DNA/CTAB complex is formed and that leads to a dark image on the thin layer of the LC supported on the surface. Moreover, DNA targets with a complementary, 1-base mismatch and non-complementary sequence can be differentiated by using this method. This study provides a new principle for the label-free detection of DNA targets without any fluorescent labels.     

Perchlorate removal by granular activated carbon coated with cetyltrimethyl ammonium bromide

In this study, granular activated carbon (GAC) coated with cetyltrimethyl ammonium bromide (CTAB) (GAC-CTAB) was synthesized to remove perchlorate from water via adsorption. Laboratory-scale batch experiments were performed to study the factors affecting the perchlorate adsorption by GAC-CTAB, including the CTAB content and solution pH, and explore the mechanisms behind the adsorption phenomenon. The novel GAC-CTAB material was characterized by scanning electron microscopy (SEM), zeta potential measurement and Brunauer-Emmett-Teller (BET) analysis. The characterization tests showed that CTAB was deposited on the GAC surface, pH(pzc) of the material was between 2.0 and 3.0, and the BET specific surface area was reduced from 925 to 729 m(2)/g with the increasing CTAB content from 0 to 0.034 mmol CTAB/g GAC. The adsorption process was better described by a pseudo-second-order kinetics model and the Freundlich adsorption model. The CTAB content and solution pH significantly influenced the kinetics and chemical equilibrium of the adsorption. When the CTAB content was increased from 0.0.023 to 0.135 mmol CTAB/g GAC, the K in the Freundlich adsorption isotherm increased from 0.071 to 0.19 mmol/g. The optimal adsorption typically occurred at pH 2-3, close to the pH(pzc) of the solution. Finally, the mechanisms for the adsorption of perchlorate on GAC-CTAB were associated with surface complexation, electrostatic interaction and ion exchange.     

Water-in-oil-in-water double nanoemulsion induced by CO(2)

The cetyltrimethylammonium bromide (CTAB)/water/heptane emulsion system with different CO(2) pressure has been studied. The phase behavior investigation shows the nanoemulsion can be formed at suitable pressure range. The generalized indirect Fourier transformation (GIFT) analysis of the small-angle X-ray scattering (SAXS) data has drawn a clear picture of the structural information of the nanoemulsion, which reveals that the droplet of emulsion has a double structure with both the outer and inner droplet size in nanometre range. Furthermore, the investigation of the heptane/CTAB/water/CO(2) emulsion system by using electrical conductivity confirms the emulsion type transforms from O/W to W/O/W. In addition, the effect of different CTAB concentration on the nanoemulsion formation has been studied. It is found that enough CTAB concentration is necessary for the inclusion of continuous water into oil droplets. We also explored the application of the W/O/W double nanoemulsion in material synthesis. Interestingly, the hollow silica spheres with double shells were obtained in this CO(2)-induced double nanoemulsion.     

A review of: “Principles of Colloid and Surface Chemistry”. Paul C. Hiemanz. Marcel Dekker,Inc., New York and Basel, 1977. xi+516 pp.m $22.50

A general reaction model for styrene hydrogenation in the CTAB/l-hexanol(l-pentanol or l-butanol)/water reversed micellar solutions was proposed to interpret the catalytic behavior of monodisperse nickel boride particles prepared in situ. Based on this model, the effect of reversed micellar components on hydrogenation activity of the catalyst has been discussed in detail. It is worth noticing that, in the three reversed micellar systems, adding ethanol into the reversed micellar solutions will result in the change of catalyst's activity in the different ways, i.e. decrease for the reversed micellar solution with the low CTAB concentration (6 wt%) and increase for those with the high CTAB content (23 wt % or 38 wt%). The result is attributed to the combined     

Effect of micelle composition on the formation of surfactant-templated polymer films

Surfactant-templated polymer films prepared from polyethylenimine (PEI), cetyltrimethylammonium bromide (CTAB), and octaethylene glycol monohexadecyl ether (C(16)E(8)) were examined and the effect of increasing the percentage of nonionic surfactant in the micelles measured using both surface and bulk-sensitive techniques. It was found that there is a strong interaction between CTAB and C(16)E(8), although no interaction between the C(16)E(8) and PEI was observed. Generally, increasing the percentage of C(16)E(8) in the micelles decreases both the thickness and degree of order in the films; however, it was observed, depending on the conditions, that films could still be formed with as little as 20% cationic surfactant. Experiments on the CTAB/Brij56/PEI system were also performed and these indicate that it is similar to the CTAB/C(16)E(8)/PEI system.     

Rheological Properties of Wormlike Micelles Formed by Cetyltrimethylammonium Bromide and Sodium Laurate

Aqueous solutions of mixed cationic and anionic surfactants, cetyltrimethylammonium bromide (CTAB) and sodium laurate (SL), have been studied by steady-state rheology and dynamic oscillatory technique. Wormlike micelles can form due to attractive interactions between the oppositely charged headgroups of CTAB and SL. The wormlike micelles formed by CTAB/SL have been compared with that of cetylpyridinium bromide (CPB)/SL by steady-state rheology method. Effects of additional components such as NaBr, 1-propanol, 1-butanol, polyvinylpyrrolidone (PVP) on the micelles formation process have also been investigated. Cole-Cole plot has been applied to study the dynamic viscoelasticity of the wormlike micelles.     

Novel magnetic and fluorescent nanocomposite as a sensitive probe for the determination of proteins

The Fe(3)O(4)/(sodium oleic acid/ethyltrimethyl ammonium bromide)(n)/4-aminobenzoic acid (Fe(3)O(4)/(NaOL/CTAB)(n)/PABA) nanocomposites have been prepared by a layer-by-layer self-assembly approach. This kind of nanocomposites have fluorescent, magnetic and water-soluble properties. Taking advantage of the magnetic property of nanocomposites, we can separated them from solution easily by using a permanent magnet. By using their strong fluorescence, we can detect proteins. At pH 6.98, the fluorescence of Fe(3)O(4)/(NaOL/CTAB)(n)/PABA nanocomposites can be enhanced by the proteins. Under optimal conditions, the linear ranges of calibration curves were 0.2-20, 0.2-13, 0.2-10 microg mL(-1) for gamma-globulin (gamma-IgG), human serum albumin (HSA), and bovine serum albumin (BSA), respectively. The detection limits were 0.02, 0.01, 0.02 for gamma-IgG, HSA and BSA, respectively. The method has been applied to analyze the total proteins in human samples and the results were in good agreement with those reported by the hospital. This method is sensitive, simple and potential in many areas.     

The Influence on Interfacial Tension of the Combination of Anionic and Cationic Surfactants: Alkyl Sulfonate/Alkyltrimethylammonium Bromide

Mioellization of aqueous mixture of sodium octyl sulfonate ( C₈As )/ cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfonate (C₁₂As)( CTAB in the presence of sodium bromide has been studied by surface tension measurement. Nonideal solution theory has been used to calculate the molecular interaction parameters (β^M and β^s). The oil-aqueous interfacial tensions of C₁₂As/ CTAB, C₈As/CTAB, C₁₂As/dodecyl trimethylammonium bromide (DTAB) systems were also measured. We studied the influence of the surfactant concentration, surfactant molar fraction ratio, hydrocarbon chain length, added NaCl and alcohol concentration on the interfacial tension.     

Understanding droplet bridging in ionic liquid-based Pickering emulsions

Copper nanoparticles are prepared in aqueous solution by reducing copper ions with hydrazine hydrate in the presence of cetyl trimethylammonium bromide (CTAB) and polyvinylpyrrolydone (PVP) as stabilizers. With only CTAB was used as stabilizer, copper nanoparticles are aggregated and partially oxidized to Cu(2)O. When both PVP and CTAB were used, dispersed copper nanoparticles with 56 nm diameter were obtained. Copper nanoparticles are simply mixed with poly (3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) in aqueous solution to form conducting composite. The effect of copper weight percent and surfactants on the conductivity and stability of the composite has been investigated.     

Fractal metal nanoparticle aggregates morphology formation mediated by polyelectrolyte/surfactant complex films at interfaces

In this work, the gold nanoparticle self-assembly behavior of mica-surface-confined polyelectrolyte/surfactant complex films was investigated. First, modified partially hydrated polyacrylamide (MHPAM)/hexadecyltrimethylammonium bromide (CTAB) complex films were deposited on the mica surface using Langmuir–Blodgett technique. Then, the preadsorbed MHPAM/CTAB complex film mica plate was dipped into the gold aqueous solution and the interesting fractal nanostructured gold network was formed. In addition, the effect of dipping time on gold nanoparticle self-assembly morphology was studied. The mechanism of formation process is briefly proposed.     

The Viscous Properties of Anionic/Cationic and Cationic/Nonionic Mixed Surfactant Systems

The behavior of mixed cationic/anionic and cationic/nonionic surfactants solutions have been studied by viscosimetry. The systems studied were sodium dodecyl sulfate (SDS)/cetyltrimethylammonium bromide (CTAB) and CTAB/Brij (polyoxyethylene lauryl ether, n = 10 and 23) in aqueous and sodium chloride solutions. The relative viscosity of single nonionic surfactant solutions is larger than that of SDS or CTAB solutions. It increases with the number of ethylene oxide groups. In the mixed systems, viscosity deviates from ideal behavior. The deviation results from electrostatic interactions. The surfactant mixture composition affects the self-assembled microstructure and rheology. A new mixed system that forms clear micellar solution above CMC was detected. In CTAB/Brij systems, the experimental data also deviate from ideal behavior due to mixed micelle formation and electroviscous effect. This effect is less pronounced than that of SDS/CTAB system and could be suppressed by adding an electrolyte (NaCl).