The electrochemical oxidation of troxerutin and its sensitive determination in pharmaceutical dosage forms at PVP modified carbon paste electrode

The voltammetric responses of troxerutin were investigated at polyvinylpyrrolidone (cross-linked) (PVP) modified carbon paste electrode (CPE) in 0.1 mol/L KCl by several electrochemical techniques. A well-defined oxidation peak was observed at about 0.97 V. Compared with poor responses of troxerutin at bare electrode that at this modified electrode has been greatly improved. It is PVP that enhances the adsorption of troxerutin to electrode surface based on their hydrophobic property. Under some optimized experimental conditions, a simple and sensitive electroanalytical method was developed for the quantitative analysis of troxerutin. A very low detection limit of 5.0 x 10(-9)mol/L was obtained for 5 min accumulation at open circuit (S/N=3). This proposed method was successfully applied to the detection of troxerutin in pharmaceutical dosage forms and satisfying results had been obtained.     

SMV在SDBS自组装膜与RGO复合修饰碳糊电极上的电催化氧化及电分析研究

研究了辛伐他汀(SMV)在表面活性剂十二烷基苯磺酸钠(SDBS)自组装膜与石墨烯(RGO)复合修饰碳糊电极(SDBS-RGO/CPE)上的电催化氧化和电化学动力学性质。实验结果表明,SDBS-RGO/CPE对SMV电化学氧化具有良好的催化作用。同时用循环伏安法(CV),计时电流法(CA)测定了SMV在SDBS-RGO/CPE上的电极反应动力学参数,用方波伏安法(SWV)测得SMV氧化峰电流(I pa)与其浓度在6.0×10-5～4.5×10-4mol·L-1范围内呈良好线性关系,检测限(S/N=3)为5.0×10-6mol·L-1,同时运用该方法对市售辛伐他汀片剂中SMV含量进行了电化学定量测定,测定结果符合定量测定要求。     

亚硫酸盐在乙酰二茂铁修饰碳糊电极上的电催化氧化及其电化学动力学性质研究

研究了亚硫酸盐在乙酰二茂铁(AFc)修饰碳糊电极(AFc/CPE)上的电催化行为。研究结果表明,其在裸碳糊电极(CPE)上的行为比亚硫酸盐在AFc/CPE上的氧化峰电流增加约3倍,氧化峰电位负移360 mV,表明AFc/CPE对亚硫酸盐的电化学氧化具有良好的催化作用。用循环伏安法、计时电流法测定了亚硫酸盐在AFc/CPE上的电极过程动力学参数,测得电荷传递系数α为0.70,电催化氧化反应速率常数k为(4.91±0.05)×104(mol/L)-1.s-1。催化氧化峰电流与亚硫酸盐在5.0×10-4~1.1×10-2mol/L浓度范围内呈良好的线性关系,线性回归方程为Ipa(μA)=1.345 7.956c(10-3mol/L),R=0.9988,检出限为2.0×10-5mol/L。可用于亚硫酸盐的电化学定量测定方法。     

苦参碱在多壁碳纳米管修饰玻碳电极上的电催化氧化及其电分析方法

研究了苦参碱(Matrine, MT) 在多壁碳纳米管修饰玻碳电极(MWCNT/GCE)上的电化学行为. 与GCE相比, MT在MWCNT/GCE上峰电位负移120 mV, 峰电流增大约2.5倍, 表明MWCNT/GCE对MT的电化学氧化具有良好的催化作用. 同时测定并计算了MT在MWCNT/GCE上的电极过程动力学参数: 电子转移系数α、电极反应速率常数ks、扩散系数D. 运用差分脉冲伏安法对苦参碱样品含量进行测定, 相对标准偏差为0.12%～2.9%, 加标回收率为98.4%～99.0%. 该方法可用于MT的电化学定量测定.     

花旗松素在碳纳米管-离子液体修饰碳糊电极上的电催化氧化及其测定

制备了碳纳米管(MWCNTs)和疏水性离子液体N-丁基吡啶六氟磷酸盐([Bu Py]PF6)复合修饰碳糊电极(MWCNTs-[Bu Py]PF6/CPE),利用循环伏安法研究了花旗松素在MWCNTs-[Bu Py]PF6/CPE上的电化学氧化行为。结果表明,花旗松素在修饰电极上出现一对灵敏、准可逆的氧化还原峰,氧化峰电位Epa=0.60 V,还原峰电位Epc=0.24 V,△Ep=0.46 V,氧化峰电流ipa=3.96μA,还原峰电流ipc=5.03μA,ipa/ipc=0.79,表明MWCNTs-[Bu Py]PF6/CPE对花旗松素具有良好的电催化氧化作用。用差分脉冲伏安法(DPV)测得花旗松素的氧化峰电流ipa与浓度c在1.2×10-5~4.0×10-2g·L-1范围内呈良好线性,检出限为2.2×10-6g·L-1。该法用于水红花子中花旗松素含量的测定,RSD为1.1%~1.5%,加标回收率为97.3%~101.3%。     

萘乙酸在多壁碳纳米管-离子液体复合修饰电极上的电催化氧化及电分析方法

运用循环伏安法(CV),计时库仑法(CC),计时电流法(CA)研究了萘乙酸(NAA)在玻碳电极(GCE),多壁碳纳米管修饰玻碳电极(MWCNTs/GCE)和多壁碳纳米管-离子液体修饰玻碳电极(MWCNTs-IL/GCE)上的电化学行为及电化学动力学性质.实验结果表明,NAA在GCE电极上于1.00V附近有一不可逆氧化峰...     

Electrocatalytic oxidation of quinine sulfate at a multiwall carbon nanotubes-ionic liquid modified glassy carbon electrode and its electrochemical determination

The electrocatalytic oxidation of quinine sulfate (QS) was investigated at a glassy carbon electrode, modified by a gel containing multiwall carbon nanotubes (MWCNTs) and room-temperature ionic liquid of 1-Butyl-3-methylimidazolium hexafluorophate (BMIMPF₆) in 0.10 M of phosphate buffer solution (PBS, pH 6.8). It was found that an irreversible anodic oxidation peak of QS with E _pa as 0.99 V appeared at MWCNTs-RTIL/glassy carbon electrode (GCE). The electrode reaction process was a diffusion-controlled one and the electrochemical oxidation involved two electrons transferring and two protons participation. Furthermore, the charge-transfer coefficient (α), diffusion coefficient (D), and electrode reaction rate constant (k _f) of QS were found to be 0.87, 7.89 × 10⁻³ cm²⋅s⁻¹ and 3.43 × 10⁻² s⁻¹, respectively. Under optimized conditions, linear calibration curves were obtained over the QS concentration range 3.0 × 10⁻⁶ to 1.0 × 10⁻⁴ M by square wave voltammetry, and the detection limit was found to be 0.44 μM based on the signal-to-noise ratio of 3. In addition, the novel MWCNTs-RTIL/GCE was characterized by the electrochemical impedance spectroscopy and the proposed method has been successfully applied in the electrochemical quantitative determination of quinine content in commercial injection samples and the determination results could meet the requirement.     

芬苯达唑在石墨烯与[Bupy]PF_6复合修饰碳糊电极上的电化学性质及电分析方法研究

本文研究了芬苯达唑(Fenbendazole,FBZ)在石墨烯(RGO)与离子液体(N-丁基吡啶六氟磷酸盐)复合修饰碳糊电极上的电催化氧化及电化学动力学性质。同时用CC法(计时库仑法)、计时电流法(CA)测定FBZ在RGO-[Bupy]PF6/CPE上的电极反应动力学参数,并用方波伏安法(SWV)测定FBZ氧化峰电流(Ip)与其浓度c在4.0×10-8~1.0×10-5mol·L-1范围内呈良好线性关系,线性回归方程为Ip(μA)=1.471+5220.78c(10-3mol·L-1),R=0.9995,检测限(S/N=3)为1.4×10-9mol·L-1,在此基础上用SWV法对FBZ片剂中FBZ含量进行了电化学定量测定,RSD在0.2%~0.9%之间,回收率在99.0%~101.4%之间。     

Voltammetric determination of pentachlorophenol with a silica gel-modified carbon paste electrode

Summary The anodic voltammetric behaviour of pentachlorophenol at a silica gel-modified carbon paste electrode in aqueous solution is reported. Adsorption of the fungicide onto the electrode under open-circuit conditions is followed by application of either differential or square wave voltammetry. The results obtained by differential pulse voltammetry at pH 2.9, with a modifier concentration of 10% and accumulation times of 120 and 300 s, allowed the development of a method to determine pentachlorophenol in the ranges of 1.0×10⁻⁶–1.0×10⁻⁵ and 1.0×10⁻⁷–1.0×10⁻⁶ mol l⁻¹. The relative standard deviation is 2.6% for a concentration of 2.0×10⁻⁷ mol l⁻¹, with a detection limit of 1.8×10⁻⁸ mol l⁻¹ (5 ppb). The effect of other chlorophenols was studied. The results obtained by square wave voltammetry showed a behaviour typical of an irreversible electron transfer. Amplitude, step height and frequency were optimised, taking into account the resolution of the voltammetric response. No improvement in sensitivity was obtained with respect to DPV. Good results were obtained by applying the proposed differential-pulse voltammetric method to the determination of pentachlorophenol in a commercial fungicide.     

Electrocatalytic oxidation of dopamine at an ionic liquid modified carbon paste electrode and its analytical application

A room-temperature ionic liquid N-butylpyridinium hexafluorophosphate was used as a binder to construct an ionic liquid modified carbon paste electrode, which was characterized by scanning electron microscopy and electrochemical impedance spectroscopy. The ionic liquid carbon paste electrode (IL-CPE) showed enhanced electrochemical response and strong analytical activity towards the electrochemical oxidation of dopamine (DA). A pair of well-defined quasireversible redox peaks of DA appeared, with the redox peaks located at 215 mV (E _pa) and 151 mV (E _pc) (vs. the saturated calomel electrode, SCE) in pH 6.0 phosphate buffer solution. The formal potential (E ^0′) was calculated as 183 mV (vs. SCE) and the peak-to-peak separation as 64 mV. The electrochemical behavior of DA on the IL-CPE was carefully investigated. Under the optimal conditions, the anodic peak currents increased linearly with the concentration of DA in the range 1.0 × 10⁻⁶–8.0 × 10⁻⁴ mol/L and the detection limit was calculated as 7.0 × 10⁻⁷ mol/L (3σ). The interferences of foreign substances were investigated and the proposed method was successfully applied to the determination of DA injection samples. The IL-CPE fabricated was sensitive, selective and showed good ability to distinguish the coexisting ascorbic acid and uric acid.     

二苯氨基碳酰肼在多壁碳纳米管修饰电极上的电催化氧化及电化学动力学研究

肼及其衍生物被广泛应用于医药,农药,水处理,军事,航天,光稳定剂以及化工生产助剂等诸多领域。因此对肼及其衍生物的研究有着极其重要的意义。二苯氨基碳酰肼(二苯氨基脲,又名二苯卡巴肼,D iphenyl Carbazide,DPC)广泛用于重金属离子的检测分析[1-4]。但是,目前关于DPC的电化学     

Adsorptive stripping voltammetric determination of azithromycin at a glassy carbon electrode modified by electrochemical oxidation.

The adsorptive and electrochemical behaviors of azithromycin were investigated on a glassy carbon electrode that was electrochemically treated by anodic oxidation at +1.8 V, following potential cycling in the potential range from -0.8 to +1.0 V. The resulting electrode showed good activity to improve the electrochemical response of the drug. An adsorptive stripping voltammetric method for the determination of azithromycin at an electrochemically activated glassy carbon electrode has been developed. Azithromycin was accumulated in phosphate buffer, pH 6, at a potential of +0.3 V (vs. Ag/AgCl electrode) for a certain time, and then determined by differential pulse voltammetry. The oxidative peak current at +0.82 V, at a scan rate of 20 mV s(-1), was a linear function of the concentration in the ranges of 0.25 - 2 microg mL(-1) and 1 - 10 microg mL(-1) using a 240 or 60 s(-1) preconcentration time, respectively. Application of the method to the determination of azithromycin in pharmaceuticals resulted in an acceptable deviation from the stated concentration. The preconcentration medium-exchange approach was utilized for the selective determination of the drug in spiked urine samples with satisfactory results. The peak current was linear with the drug concentration in the range of 0.5 - 3.5 microg per mL urine. The detection limit was 0.2 microg mL(-1) urine. The recovery levels of the method reached 96.3%.     

硫脲在10-甲基吩噻嗪修饰碳糊电极上的电催化氧化及电分析方法研究

研究了硫脲(Thiourea,Tu)在10-甲基吩噻嗪修饰碳糊电极(MPT/CPE)上的电催化氧化行为.结果表明,Tu在裸碳糊电极(CPE)上的直接电化学氧化过程十分迟缓,MPT/CPE对Tu的电化学氧化具有良好的催化作用.用计时电流法(CA)测定了Tu在MPT/CPE上的电极过程动力学参数,测得电荷传递系数α=0.61,电催化氧化反应的速率常数k=(1.96±0.10)×104(mol/L)-1·s-1.用方渡伏安法(SWV)测得催化氧化峰电流与Tu浓度在1.0×10-6～8.0×10-3mol/L范围内呈良好的线性关系,线性回归方程为,Ips(μA)=10.836c(10-3mol/L)+5.326,R=0.9984,检出限为2.2×10-7mol/L(S/N=3).方法可用于Tu的电化学法测定.     

苯甲酰肼在多壁碳纳米管修饰玻碳电极上的电催化氧化及其电化学动力学性质

研究了苯甲酰肼(BH)在MWCNT/GCE上的电化学行为。实验结果表明,BH在GCE上的直接电化学氧化十分迟缓,无氧化峰出现,但在MWCNT/GCE上BH在0.20 V处出现了一个不可逆氧化峰,且峰电流大幅度增大,表明MWCNT/GCE对BH电化学氧化具有良好的催化作用。同时用计时库仑法(Chro-nocoulometry,CC)和计时电流法(Chronoamperometry,CA)测定了电极过程动力学参数:扩散系数D=8.73×10-5cm2.s-1,电子转移系数α=0.85,电极反应速率常数kf=1.45×10-3s-1。稳态电流-时间实验结果表明,电流响应信号随其浓度成比例增长,响应时间小于6 s,最低响应浓度为1×10-6mol/L。该方法可用于BH电化学定量测定。     

Fast and sensitive determination of captopril by voltammetric method using ferrocenedicarboxylic acid modified carbon paste electrode

A ferrocenedicarboxylic acid modified carbon paste electrode was constructed and used as a fast and sensitive tool for the determination of captopril at trace level. It has been shown by direct current cyclic voltammetry and double step chronoamperometry that ferrocenedicarboxylic acid can catalyze the oxidation of captopril in aqueous buffer solution and produces a sharp oxidation peak current at about +0.49 vs. Ag/AgCl reference electrode. The square wave voltammetric peak currents of the electrode increased linearly with the corresponding captopril concentration in the range of 3.0 × 10⁻⁷–1.4 × 10⁻⁴M with a detection limit of 9.1 × 10⁻⁸ M. The influence of pH and potential interfering substances on the determination of captopril were studied. Electrochemical impedance spectroscopy was used to study the charge transfer properties at the electrode–solution interface. Finally, the sensor was examined as a selective, simple, and precise new electrochemical sensor for the determination of captopril in real samples, such as drug and urine, with satisfactory results.     

对硫磷在聚乙烯吡咯烷酮修饰碳糊电极上的电化学行为及其分析研究

研究了对硫磷在聚乙烯吡咯烷酮(PVP)修饰碳糊电极(CPE)上的电化学行为,发现PVP能显著提高对硫磷的氧化还原峰电流.据此建立了一种直接测定对硫磷的电分析方法.对硫磷氧化峰电流与其浓度在2.5×10-8～1.0×10-6mol/L及1.0×10-6～1.0 × 10-5mol/L 范围内呈良好的线性关系,开路富集5 min后,检出限为7.5×10-9mol/L.在1.0×10-5mol/L的对硫磷试液中连续测定10次,其RSD为2.8%.用此方法测定了蔬菜中的对硫磷.     

Sensitive voltammetric determination of rutin at an ionic liquid modified carbon paste electrode

An ionic liquid modified carbon paste electrode (IL/CPE) had been fabricated by using hydrophilic ionic liquid 1-amyl-3-methylimidazolium bromide ([AMIM]Br) as a modifier. The IL/CPE was characterized by scanning electron microscope and voltammetry. Electrochemical behavior of rutin at the IL/CPE had been investigated in pH 3.29 Britton-Robinson (B-R) buffer solution by cyclic voltammetry (CV) and square wave voltammetry (SWV). The experimental results suggested that the modified electrode exhibited an electrocatalytic activity toward the redox of rutin. The electron transfer coefficient (α) and the standard rate constant (k_s) of rutin at the modified electrode were calculated. Under the selected conditions, the reduction peak current was linearly dependent on the concentration of rutin in the range of 4.0 × 10⁻⁸ to 1.0 × 10⁻⁵ mol L⁻¹ (r = 0.9998), with a detection limit of 1.0 × 10⁻⁸ mol L⁻¹ (S/N = 3). The relative standard deviation (R.S.D.) for six times successful determination of 8.0 × 10⁻⁷ mol L⁻¹ rutin was 1.2%. The proposed method was applied to determine rutin in tablet and urine sample. In addition, the IL/CPE exhibited a distinct advantage of simple preparation, surface renewal, good reproducibility and good stability.     

Poly-glutamic acid modified carbon nanotube-doped carbon paste electrode for sensitive detection of L-tryptophan

A novel poly-glutamic acid (PGA) film modified carbon paste electrode (CPE) incorporating carbon nanotubes (CNTs) was first prepared for the determination of l-tryptophan (l-Trp). Scanning electron microscopy and Fourier transform infrared spectroscopy were applied for characterization of the surface morphology of the modified electrodes and cyclic voltammetry was used to investigate the electrochemical properties of the proposed electrode towards the oxidation of l-Trp. Optimization of the experimental parameters was performed with regard to pH, ratio of CNTs, concentration of glutamic acid, electro-polymerization cycles, accumulation time and concentration of sodium dodecylbenzene sulfonate. The linearity between the oxidation peak current and the l-Trp concentration was obtained in the range of 5.0×10(-8) to 1.0×10(-4)M with a detection limit of 1.0×10(-8)M (S/N=3) and the sensitivity was calculated to be 1143.79μA?mM(-1)?cm(-2). In addition, the PGA modified CPE incorporating CNTs displayed high selectivity, good stability and reproducibility, making it suitable for the routine analysis of l-Trp in clinical use.     

Voltamperometric determination of kinetin with a carbon paste modified electrode

The electrochemical behaviour of kinetin (6-furfurylaminopurine) on a carbon paste modified with OV-17 silicone electrode, is studied. The determination of kinetin is possible working in square wave voltammetric techniques, reaching limits of determination of 38.7 ng ml⁻¹. The proposed method was successfully applied to determine the cytokinin in extracts of apples (previously spiked with kinetin) and the obtained results were in accordance with the results obtained with HPLC-UV.