Electroless deposition of gold into poly-3,4-ethylenedioxythiophene films and their characterization performed in chloride-containing solutions

Au-containing polymer films were obtained by electroless deposition of gold from diluted solutions of HAuCl₄ into preliminarily reduced poly-3,4-ethylenedioxythiophene (PEDOT) films. Structural peculiarities of such pristine and composite films were characterized by scanning and transmission electron microscopy methods. It was established that the gold clusters forming under such deposition appear on the outer surface of polymer films and their pores. The clusters’ sizes ranged between 30 and 100 nm depending on the time of exposition of a PEDOT film in solutions of Au(III) ions and the concentration of these ions. It was also observed that in contrast to pristine PEDOT films, cyclic voltammograms (CVs) of composite films in the presence of chloride ions show additional redox peaks resulting from oxidation of gold with formation of an insoluble product and followed by the product reduction under reversal of the potential scan direction. As a result of parallel electrochemical quartz crystal microbalance (EQCM) and CV measurements, it was also established that the number of chloride ions per one transferring electron in the gold oxidation process is near to unity. To elucidate the oxidation degree of gold in the presence of chloride ions, a special procedure of changing the electrode potential was used. It consisted of clamping the high anodic potential in the region of gold oxidation (0.97 V, Ag/AgCl) and subsequent gradual decrease of the electrode potential with a constant scan rate. Under these conditions, it was possible to completely oxidize all the gold particles containing in a composite film and find out the maximum amount of electricity consumed for the product particles’ reduction. A comparison between such data and the results obtained in EQCM determinations of the gold content in the same film led to the conclusion that the oxidation state of gold in the complexes formed is Au(III). The effects of chloride ion concentration and scan rate of the electrode potential on current responses of PEDOT–Au films were investigated. Some primary conclusions on the kinetics of the studied processes are made.     

Gold electroless deposition into poly-3,4-ethylenedioxythiophene films

By electroless deposition of gold into poly-3,4-ethylenedioxythiophene (PEDOT) films, the composite films (PEDOT-Au) are synthesized. Their electrochemical properties are studied by cyclic voltammetric (CVA) method. It is shown that in contrast to the original PEDOT film, the CVA curves of composite PEDOT-Au films measured in the presence of chloride ions reveal additional redox peaks associated with the presence of gold particles. The loading of metal gold particles by its chemical deposition into the polymer film is quantitatively assessed using quartz crystal microbalance method. The film mass is shown to depend on the time of gold loading and its original concentration in solution. The gold particles are shown to be oxidized by a reaction of the first order with respect to chloride ions. Based on the results of voltammetric and microbalance methods, the formation of a poorly soluble gold oxidation product Au(I)Cl in chloride-containing solutions was inferred.     

Electrochemistry of conductive polymers 39. Contacts between conducting polymers and noble metal nanoparticles studied by current-sensing atomic force microscopy

Electrical properties of contacts formed between conducting polymers and noble metal nanoparticles have been examined using current-sensing atomic force microscopy (CS-AFM). Contacts formed between electrochemically prepared pi-conjugated polymer films such as polypyrrole (PPy), poly(3-methylthiophene) (P3MeT), as well as poly(3,4-ethylenedioxythiophene) (PEDOT) and noble metal nanoparticles including platinum (Pt), gold (Au), and silver (Ag) have been examined. The Pt nanoparticles were electrochemically deposited on a pre-coated PPy film surface by reducing a platinum precursor (PtCl62-) at a constant potential. Both current and scanning electron microscopic images of the film showed the presence of Pt islands. The Au and Ag nanoparticles were dispersed on the P3MeT and PEDOT film surfaces simply by dipping the polymer films into colloid solutions containing Au or Ag particles for specified periods (5 to approximately 10 min). The deposition of Au or Ag particles resulted from either their physical adsorption or chemical bonding between particles and the polymer surface depending on the polymer. When compared with PPy, P3MeT and PEDOT showed a stronger binding to Au or Ag nanoparticles when dipped in their colloidal solutions for the same period. This indicates that Au and Ag particles are predominantly linked with the sulfur atoms via chemical bonding. Of the two, PEDOT was more conductive at the sites where the particles are connected to the polymer. It appears that PEDOT has better aligned sulfur atoms on the surface and is strongly bonded to Au and Ag nanoparticles due to their strong affinity to gold and silver. The current-voltage curves obtained at the metal islands demonstrate that the contacts between these metal islands and polymers are ohmic.     

Electrochemical properties of composite films based on poly-3,4-ethylenedioxythiophene with inclusions of metallic palladium

The electrochemical behavior of composite Pd-PEDOT films is studied. These films are obtained by chemical deposition of Pd particles in the polymeric matrix of PEDOT (poly-3,4-ethylenedioxythiophene). Characteristics of the films are determined by means of cyclic voltammetry, faradaic impedance, microgravimetry, and energy-dispersive x-ray fluorescence analysis. Impedance spectra of composite Pd-PEDOT films, compared to the original PEDOT film, reveal a new response at potentials of −0.3 and −0.4 V in the form of a distinct semicircle, which results from processes in the electrochemical sorption-desorption of hydrogen. Weight gain during the chemical deposition of palladium in the polymer structure is estimated by mircrogravimetry. It is shown that the mass of palladium loaded in the film depends on the time of synthesis and the initial concentration of palladium ions in solution. The size of the actual surface and the average radius of dispersed palladium particles in the film are also estimated.     

PEDOT-supported Pd nanoparticles as a catalyst for hydrazine oxidation

Composite poly-3,4-ethylenedioxythiophene (PEDOT)/palladium (Pd) films were obtained by chemical deposition of dispersed palladium nanoparticles into PEDOT conducting polymer matrix. The amounts of palladium particles incorporated into PEDOT films were estimated by electrochemical quartz crystal microbalance measurements. It was shown that palladium loading depends on the time a PEDOT film is exposed in the solution, containing Pd(II)-ions, on the concentration of Pd(II) ions and the film thickness. X-ray photoelectron spectroscopy data have confirmed the presence of metallic palladium in the polymer. The morphology of pristine and composite films as well as the size of Pd nanoparticles and their distribution were characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). From SEM images, it was found that Pd particles decorated PEDOT globular structures as quasi-spherical particles, and their mean size was dependent on synthesis conditions. The nanoparticles were non-uniformly dispersed on the polymer surface. The comparison of TEM images of composite PEDOT/Pd films obtained for different times of metal loading was made. The remarkable effect of loading time on the size of particles has been established: the mean size of dominating palladium particles was close to 6–10 nm for 30 s of metal deposition, and it was getting larger with the increase of deposition time (close to 15–30 nm for 120 s). It is most likely that with prolongation of synthesis time, the deposition of palladium predominantly proceeds on the already deposited palladium clusters, resulting in the extension growth of their size. Catalytic properties of PEDOT/Pd composite films were studied in respect to hydrazine oxidation by cyclic voltammetry and voltammetry on rotating disk electrode. The obtained data allow to conclude that the process of hydrazine oxidation on PEDOT/Pd composites takes place predominantly on palladium particles, located on the surface or in the near-surface layers of the polymer. The diffusion nature of the limiting current of hydrazine oxidation on composite PEDOT/Pd film in phosphate buffer solution рН = 6.86 was confirmed, and hydrazine diffusion coefficient was calculated. The increase of the limiting currents of hydrazine oxidation with the increase of Pd deposition time was observed, resulting from the increase of the active surface area of palladium particles, acting as microelectrodes. The electroanalytical applications of these nanocomposite materials for the determination of hydrazine were demonstrated.     

EQCM study of redox properties of PEDOT/MnO<Subscript>2</Subscript> composite films in aqueous electrolytes

Electrochemical behavior of poly-3,4-ethylenedioxythiophene composites with manganese dioxide (PEDOT/MnO₂) has been investigated by cyclic voltammetry and electrochemical quartz crystal microbalance at various component ratios and in different electrolyte solutions. The electrochemical formation of PEDOT film on the electrode surface and PEDOT/MnO₂ composite film during the electrochemical deposition of manganese dioxide into the polymer matrix was gravimetrically monitored. The mass of manganese dioxide deposited into PEDOT at different time of electrodeposition and apparent molar mass values of species involved into mass transfer during redox cycling of PEDOT/MnO₂ composites were evaluated. It was found that during the redox cycling of PEDOT/MnO₂ composite films with various MnO₂ content, the oppositely directed fluxes of counterions (anions and cations) occur, resulting in a change of the slope of linear parts of the Δf–E plots with changing the mass fraction of MnO₂ in the composite film.Rectangular shape of cyclic voltammograms of PEDOT/MnO₂ composites with different loadings of manganese dioxide was observed, which is characteristic of the pseudocapacitive behavior of the composite material. Specific capacity values of PEDOT/MnO₂ composites obtained from cyclic voltammograms were about 169 F g^?1. The specific capacity, related to the contribution of manganese dioxide component, was about 240 F g^?1.     

Structure and electrochemical properties of composite films based on poly-3,4-ethylenedioxythiophene with metallic palladium inclusions

The electrochemical behavior of PEDOT/Pd composite films obtained by the chemical deposition of ultradisperse Pd particles in the poly-3,4-ethylenedioxythiophene (PEDOT) polymer matrix was studied. The structure of the films was determined by electron microscopy and energy-dispersion X-ray fluorescence analysis. The electrochemical properties of PEDOT/Pd composite films in solutions containing hydrogen peroxide was also studied. Special attention was paid to the effect of the time of the chemical deposition of palladium in the polymer structure on the electroreduction of hydrogen peroxide in phosphate buffer solutions.     

Deposition of Au and Ag nanoparticles on PEDOT

The deposition of Au and Ag, locally and from bulk solution, on poly(3,4-ethylenedioxythiophene) (PEDOT) was studied. Specifically, PEDOT was electrochemically polymerized onto a glassy carbon (GC) electrode and used for bulk deposition of Au and Ag from their respective ions dissolved in the solution as well as for the local deposition of these metals using scanning electrochemical microscopy (SECM). These two sets of experiments were utilized to investigate the difference between Au and Ag electrochemical deposition on PEDOT. In particular, SECM experiments, which were conducted by the controlled anodic dissolution of Au and Ag microelectrodes close to GC/PEDOT, probed the effect of different PEDOT oxidation states on local deposition. The current-time transients recorded during the deposition, combined with scanning electron microscopy and EDX analysis provided insight into the reduction processes. AuCl(4)(-) and Ag(+) ions were electrochemically reduced at a potential equal to and more negative than the ions redox potentials (0.4 and 0.2 V, respectively) and more positive than -0.7 V, where the PEDOT starts transforming into the reduced, i.e. insulating, state. We found that the electroreduction of Ag(+) ions was diffusion-controlled and the PEDOT film served as a simple conductor. On the other hand, the reduction of AuCl(4)(-) ions was enhanced on GC/PEDOT as compared with bare GC, indicating that PEDOT catalyzes the reduction of AuCl(4)(-) to Au.     

Synthesis and structure of poly-3,4-ethylenedioxythiophene film with the inclusions of palladium nanoparticles

By chemical deposition of ultrafine particles of metallic palladium on the polymer matrix of poly-3,4-ethylenedioxythiophene (PEDOT) composite PEDOT/Pd films were obtained. The conditions of synthesis of the composite films in dependence on the duration of exposure of the reduced form of PEDOT film in a solution of palladium chloride, its concentration and the film thickness were studied. By the methods of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) it was shown that in the process of the synthesis of the composite films the nanosized palladium particles of predominantly quasispherical shape precipitated on the globular structure of the polymer. The size of the palladium nanoparticles in the composite PEDOT film and the nature of their distribution over the film bulk were revealed. An increase in the duration of deposition of the palladium nanoparticles on the film was shown to lead to an increase in their size and in the density of particles in the film.     

Oxidation of hydrazine on poly-3,4-ethylenedioxythiophene polymer films with inclusions of palladium nanoparticles

The oxidation of hydrazine on poly-3,4-ethylenedioxythiophene (PEDOT/Pd) composite films was studied. The films were obtained by chemical deposition of palladium into a PEDOT polymer matrix. The structure of the films was characterized by electron microscopy. The effect of hydrazine concentration and amount of deposited palladium on the oxidation of hydrazine in phosphate buffer solutions (pH 6.86) was investigated.     

Preparation of Antibacterial Waterborne Polyurethane/silver Nanocomposite

Stable aqueous dispersions of silver (Ag) nanoparticles were prepared by reducing silver nitrate solutions with sodium borohydride (NaBH₄) in the presence of waterborne polyurethane as a stabilizing agent. WPU/Ag nanocomposites were obtained after evaporating water. Transmission electron microscope (TEM) shows nanoscale Ag particles are well dispersed in WPU matrix at a lower concentration, while particles exhibit a little aggregation at a higher concentration. UV‐visible spectra, X‐ray powder diffraction, and energy dispersive X‐ray spectrometer (EDS) confirm the existence of Ag particle in WPU matrix. The WPU/Ag composite films show good antibiotic ability.     

Electroless deposition of silver on poly(3, 4-ethylenedioxythiophene): role of the organic ions used in the course of electrochemical synthesis

The electroless deposition of silver is studied on poly(3, 4-ethylenedioxythiophene) (PEDOT) layers synthesized in the presence of excess of perchlorate ions with and without the addition of two organic dopants: dodecylsulfate (DDS) or polystyrenesulfonate (PSS). Silver deposition is carried out at the expense of oxidation of the pre-reduced PEDOT layers using either Ag⁺ cation or [AgEDTA]^3? complex anion solutions. The amount of deposited silver is monitored by voltammetric stripping. The type of the metal deposit is imaged by SEM. It is found that there are marked differences between the three types of PEDOT with respect to the amount of deposited silver and size distribution of the metallic species. In both silver plating solutions, the largest amount of silver is deposited on PEDOT/DDS, followed by PEDOT/PSS and PEDOT/ClO₄ ^?. These results are discussed in the context of possible structural difference of the three types of PEDOT layers. The comparison between the silver deposits obtained in the two silver plating solutions shows finer dispersion and larger amount of the metallic phase obtained in the presence of the silver complex anions. This solution presents a better opportunity to obtain homogeneous distribution of silver crystalline species on the PEDOT surface.     

Redox reactions of ferricyanide ions in layer-by-layer deposited polysaccharide films: a significant effect of the type of polycation in the films

Redox reactions of ferricyanide ions, [Fe(CN)6]3-, in polysaccharide thin films that were prepared by layer-by-layer (LbL) deposition on the surface of a gold electrode were studied electrochemically by cyclic voltammetry. LbL films composed of alginic acid (AGA) and carboxymethylcellulose (CMC) were successfully prepared using poly(ethyleneimine) (PEI) and poly(diallyldimethylammonium chloride) (PDDA) as the cationic counterparts in the electrostatic LbL deposition. The deposition behavior of the PEI-based films significantly depended on the pH of the solutions from which the LbL films were deposited, while the effects of pH were negligibly small for the PDDA-based films due to the pH-independent positive charges on the PDDA chains. The cyclic voltammograms (CVs) of [Fe(CN)6]3- ions on the LbL film-coated electrodes revealed that all the LbL films tested are permeable to [Fe(CN)6]3- ions and that the redox reactions of [Fe(CN)6]3- ions proceed smoothly in the LbL polysaccharide films. It was found that [Fe(CN)6]3- ions are concentrated in the films from the bulk solution, depending on the pH of the medium and on the type of polycations in the film. The PEI-based films concentrated [Fe(CN)6]3- ions more effectively in an acidic solution than in neutral and basic media, while the pH effect was not observed for the PDDA-based films. In addition, we found that the [Fe(CN)6]3- ions are confined in the LbL films due to a strong binding of the ions to the positively charged sites arising from the protonated amino groups in the films. The confined [Fe(CN)6]3- ions exhibited redox reactions in the films, with the redox potentials being shifted to the positive or negative direction in the PEI- or PDDA-based film, respectively, as compared to the redox potential of diffusing [Fe(CN)6]3- ions. Thus, significant effects of the type of polycation in the LbL films on the redox reactions of [Fe(CN)6]3- ions were observed.     

The reduction of Ag+ in metallic silver on pseudomelanin films allows for antibacterial activity but does not imply unpaired electrons

Dopamine-melanin films produced through the oxidation of dopamine in the presence of oxygen as an oxidant allow to reduce silver ions onto silver particles as already described in the paper by Lee et al. (H. Lee, S.M. Dellatore, W.M. Miller, P.B. Messersmith, Science 318 (2007) 426.). This reduction process has to occur through the oxidation of moieties present in the melanin film. This investigation shows that the free radicals present in the pseudomelanin film, quantified by means of electron spin resonance spectroscopy (ESR) for the first time, are not used in the transformation of Ag(+) cations to deposit silver. The ESR signal is hardly affected by the deposition of silver particles. On the other hand, X-ray photoelectron spectroscopy shows a small increase in the density of quinone groups and a small decrease of catechol groups on the surface of the film during the deposition of silver. This suggests that the deposited pseudomelanin films contain a significant fraction of catechol groups able to trigger reduction processes of metallic cations. These silver nanoparticles remain adherent to the melanin films and allow for a quantitative killing of Escherichia coli over a broad range of bacterial dilutions. However, the presence of the bacteria induces a release of the nanoparticles. The pseudomelanin films cannot be reused again for a silver ion reduction step. Nevertheless, the easy preparation of the pseudomelanin-silver composite and its effective one shot bacterial killing activity renders the strategy presented in this paper attractive. Some fundamental questions about redox process allowed by the pseudomelanin films will also be asked.     

石墨烯/银复合薄膜的制备及表征

采用静电自组装技术,通过交替沉积聚(二烯丙基二甲基氯化铵)(PDDA)(或硝酸银)和氧化石墨烯,制备氧化石墨烯/PDDA薄膜和氧化石墨烯/硝酸银复合薄膜。然后在600℃下通入氩气和氢气进行气氛还原得到石墨烯薄膜和石墨烯/银复合薄膜。采用AFM、SEM、XPS、UV-Vis以及四探针电阻仪等对薄膜结构及性质进行表征。结果表明,通过静电自组装法可以获得生长均匀的薄膜。对比于相同自组装次数的石墨烯薄膜,石墨烯/银复合薄膜具有更好的透光性和更低的薄膜方块电阻。在λ=500 nm时,四层石墨烯/银复合薄膜的透过率为85%左右,而石墨烯薄膜的透过率为72%左右;石墨烯薄膜的方阻为161.39 kΩ.□-1,而石墨烯/银复合薄膜的方阻为99.11 kΩ.□-1。     

Synthesis and electro‐optical characterization of new conducting PEDOT/Au‐nanorods nanocomposites

This paper describes a new strategy to obtain PEDOT/Au‐nanorods nanocomposites with different PEDOT: Au ratio. A polymeric ionic liquid (PIL) was used as stabilizer during the chemical synthesis of PEDOT dispersions. PEDOT/Au‐nanorods dispersions in organic media were obtained. Electrochemical characterization of PEDOT/Au‐nanorods nanocomposites revealed that the addition of Au nanorods modified the electroactivity of the conducting films by reducing the oxidation potential from +0.33 to +0.23 V (versus Ag/AgCl). Optical contrast (ΔT%) of the films decreased from 17% for neat PEDOT films to 8% for PEDOT/Au‐nanorods nanocomposites films (3:1 (v/v)) while switching times (from 1 to 4 sec) were similar to neat PEDOT. Conductivity of the films increased from 0.027 S/cm for neat PEDOT to 0.691 S/cm for PEDOT/Au‐nanorods nanocomposites. Nanoscale morphology and contact potential of PEDOT/Au‐nanorods nanocomposites were investigated in detail by Scanning Force Microscopy. Electrical measurements show a clear contact potential difference between the ITO substrate and the PEDOT/Au‐nanorods film. On the film, no contact potential inhomogeneity is observed indicating that the Au‐nanorods are uniformly dispersed in the film. Copyright © 2010 John Wiley & Sons, Ltd.     

Au/Ag核一壳结构复合纳米粒子形成机制的研究

在已制备好的Au纳米粒子表面,通过化学还原的方法沉积生长Ag包覆层,通过 控制Au, Ag的比列,制备了粒度均匀且粒径可控的Au/Ag核-壳结构纳米粒子。利用 UV-vis吸收光谱和透射电子显微镜（TEM）对SAu, Ag摩尔比为1：10的复合纳米粒 子的光学性质和形态进行随时监测,直接观察了核-壳结构纳米粒子的生长过程： 一部分Ag+在Au核表面还原生长,溶液中其余Ag+还原形成银的纳米团簇向粒子表面 的继续沉积生长,壳层增厚。     

Roll‐to‐Roll printed PEDOT/PSS/GO Plastic Film for Electrochemical Determination of Carbofuran

In this work, we developed a roll‐to‐roll printed poly(3,4‐ethylenedioxythiophene)/polystyrene sulphoanate without graphene oxide (GO) (PEDOT/PSS) and with graphene oxide (PEDOT/PSS/GO) plastic films for the electrochemical determination of carbofuran. Both the PEDOT/PSS and PEDOT/PSS/GO plastic films showed electroactivity towards the oxidation of carbofuran. Incorporation of graphene oxide (GO) improves the electrochemical activity of carbofuran and increased its sensitivity. The printed plastic films were characterized by cyclic voltammetry (CV), linear sweep voltammetry (LSV), surface profilometer, four point probe and atomic force microscopy (AFM). The effects of pH, deposition time, deposition potential and film thickness on the oxidation peak current of carbofuran were investigated. Under the optimized conditions, a dynamic linear range of 1 μM–90 μM with a detection limit of 1.0×10^?7 M (S/N=3) were obtained. The printed PEDOT/PSS/GO plastic electrode was applied for the determination of carbofuran in vegetable and fruit samples with recoveries between 94.4 and 101.8 %.     

硬脂酸单分子膜上电沉积Ag膜的研究

通过电沉积方法,以气/液界面上形成的硬脂酸单分子膜为模板诱导沉积金属银膜.考察了镀液pH值、单分子膜表面压及沉积电位对银膜形貌及结构的影响.实验发现,酸性镀液的气/液界面上形成的单分子膜不能诱导沉积银,而在中性和碱性镀液的气/液界面上可以诱导银膜的生长.当单分子膜处于液态或固态时,气/液界面有银膜形成;液态单分子膜上的银膜生长速度较快,且银膜的结构一致.随着电极电位的升高,银膜沉积的速度加快,呈环状向外生长的圆形银膜逐渐变得不规则.将不同实验条件下的银膜转移出来,采用扫描电镜(SEM)、透射电镜(TEM)对银膜的结构与形貌进行了表征.研究表明,银首先在单分子膜上异相成核,由八面体构型逐渐发展成星型,最终在气/液界面形成具有松枝状微观结构的光亮银膜.     

Antibacterial activity of silver bionanocomposites synthesized by chemical reduction route

ABSTRACT: BACKGROUND: The aim of this study is to investigate the functions of polymers and size of nanoparticles on the antibacterial activity of silver bionanocomposites (Ag BNCs). In this research, silver nanoparticles (Ag NPs) were incorporated into biodegradable polymers that are chitosan, gelatin and both polymers via chemical reduction method in solvent in order to produce Ag BNCs. Silver nitrate and sodium borohydride were employed as a metal precursor and reducing agent respectively. On the other hand, chitosan and gelatin were added as a polymeric matrix and stabilizer. The antibacterial activity of different sizes of silver nanoparticles was investigated against Gram-positive and Gram-negative bacteria by the disk diffusion method using Mueller-Hinton Agar. RESULTS: The properties of Ag BNCs were studied as a function of the polymer weight ratio in relation to the use of chitosan and gelatin. The morphology of the Ag BNCs films and the distribution of the Ag NPs were also characterized. The diameters of the Ag NPs were measured and their size is less than 20 nm. The antibacterial trait of silver/chitosan/gelatin bionanocomposites was investigated. The silver ions released from the Ag BNCs and their antibacterial activities were scrutinized. The antibacterial activities of the Ag BNC films were examined against Gram-negative bacteria (E. coli and P. aeruginosa) and Gram-positive (S. aureus and M. luteus) by diffusion method using Muller-Hinton agar. CONCLUSIONS: The antibacterial activity of Ag NPs with size less than 20 nm was demonstrated and showed positive results against Gram-negative and Gram-positive bacteria. The Ag NPs stabilized well in the polymers matrix.