Qualitative and Quantitative Analysis of Edible Bird’s Nest Based on Peptide Markers by LC-QTOF-MS/MS

Edible bird’s nest (EBN) is an expensive health food. There are many adulterants in the market. It remains challenging to discriminate EBN from its adulterants due to a lack of high-specificity markers. Besides, the current markers are confined to soluble fraction of EBN. Here, both soluble and insoluble fractions were analyzed by LC-QTOF-MS/MS. A total of 26 high-specificity peptides that were specific to EBN were selected as qualitative authentication markers. Among them, 10 markers can discriminate EBN from common adulterants, 13 markers discriminate white EBN from grass EBN/common adulterants, and 3 markers discriminate grass EBN from white EBN/common adulterants. Three of them, which showed high signal abundance (Peak area ≥ 10⁶) and satisfactory linearity (R² ≥ 0.995) with EBN references, were selected as the assay marker; and their peptide sequences were confidently identified by searching database/de novo sequencing. Based on these markers, a qualitative and quantitative analytical method was successfully developed and well-validated in terms of linearity, precision, repeatability, and accuracy. The method was subsequently applied to detect EBN products on the market. The results indicated that more than half of EBN products were not consistent with what the merchants claimed.     

Fast-atom-bombardment and tandem mass spectrometry for determining structures of fatty acids as their picolinyl ester derivatives

Picolinyl ester derivatives of common fatty acids can be readily desorbed by fast atom bombardment (FAB) as positive ions and then collisionally activated. Collisionally activated spectra of the (M + H)⁺ ions of the derivatives reveal that structurally informative remote-charge-site fragmentations occur. The presence of substitutents such as double bond, branch points, cyclopropane rings, hydroxy groups, and epoxy rings interrupts the fragmentation process in such a way that the substituent can be identified and its location on the alkyl chain can be determined. This method is also applicable to the picolinyl esters of short-chain fatty acids and to the analysis of mixtures of fatty acid derivatives. The approach is advantageous becasue the epicolinyl ester derivatives are also amenable to gas chromatography/mass spectrometry (GC/MS). Therefore, the FAB-MS/MS approach developed here is complementary to GC/MS.     

Oligosaccharide relative quantitation using isotope tagging and normal-phase liquid chromatography/mass spectrometry

The growing interest in the conversion of plant biomass into biofuels has recently highlighted the lack of analytical techniques that are able to profile the fine structures of plant cell-wall polysaccharides. Here we present a new liquid chromatography/electrospray ionisation mass spectrometry (LC/ESI-MS) platform called Oligosaccharide Quantitation using Isotope Tagging (OliQuIT) developed for profiling the oligosaccharides derived from glycosyl hydrolase digestion of polysaccharides. The method is demonstrated using different arabinoxylan-derived oligosaccharide samples, which are reductively aminated with either the light (12C6) or heavy (13C6) form of aniline. The complex oligosaccharide mixtures are analysed by capillary normal-phase (NP)-LC and ESI-MS. Importantly, arabinoxylan oligosaccharide isomers are separated by NP-LC and their relative abundance in different samples can be determined from the intensities of ions labeled with the different isotopes. OliQuIT will be of use in multiple applications, including screening for plant varieties with improved saccharification properties, characterizing glycosyl hydrolase specificities and analysing plant glycosyl transferase mutants.     

Influence of defects on the infrared spectra of polymers

For an infinitely repeated regular polymer chain structure the only vibrations which are optically active are those in which the phase of the motion is the same in each unit (the factor-group modes). Frequencies for which the phase difference is nonzero are optically inactive but can become activated by the presence of defects in the chain. Such defects would normally be chemical impurities or conformational irregularities in the chain. A simple theory is developed which shows that for a dilute system of defects the major characteristics determining possible activation of the nonfactor-group modes are: (1) the strength of the coupling between the defect vibration and the vibrations of the neighboring chain, and (2) whether or not the natural frequency of the defect vibration lies inside a lattice band of the regular chain. An analysis of the low- and high-frequency regions of the spectrum of low-density polyethylene, based on the above considerations, indicates that several features of the spectrum can be associated with defect-induced absorption. A similar explanation can account for certain intensity changes in the C? Cl stretching region of syndiotactic poly(vinyl chloroide) when this polymer is submitted to mechanical treatment.     

Identification of Abnormal Urinary Organic Acids in Inherited Metabolic Diseases by Gas Chromatography-Mass Spectrometry

A gas chromatography/mass spectrometry (GC/MS) coupled system has been established for the confirmatory identification of abnormal urinary organic acids in inherited metabolic diseases. Samples of patient urines were extracted with an organic solvent and trimethylsilylated (TMS). A mass spectra of gas chromatographically separated TMS derivatives can be obtained using the GC/MS coupled system with a single analytical run. Those compounds with close methylene units (e.g., 4-hydroxyphenylacetaic acid and phenylpyruvic acid) in the gas chromatograph can be identified by their specific mass spectra. The results indicate that this GC/MS system is a powerful method for identifying abnormal urinary organic acids. These acids can be identified by comparison with authentic mass spectra established in our laboratories or with mass spectra files from other sources or they can be directly identified by analysis of the mass spectrum. By using this system, we were able to make positive identification of several inherited metabolic diseases found in Chinese patients, including phenylketonuria, propionic acidemia, and methylmalonic aciduria. This GC/MS system is a powerful tool for the diagnosis of inherited metabolic diseases.     

Gas chromatographic separation of fatty acid methyl esters on weakly polar capillary columns

It was found that weakly polar columns, routinely used in capillary GC for analyzing sterols, food additives, etc., can also be used for separating fatty acid methyl esters (FAMEs). On these columns, FAMEs elute in the order of their unsaturation. The equivalent chain-length value of methyl 22:6 is below 23.00. This means FAMEs within a carbon chain length, having up to six double bonds, elute before the next (one carbon longer) saturated FAME elutes. Peak identification is easy. Weakly polar columns are compatible in both GC and GC/MS systems.     

Development and evaluation of gas and liquid chromatographic methods for the analysis of fatty amines

In contrast to the plethora of publications on the separation of fatty acids, analogous studies involving fatty amines are scarce. A recently introduced ionic‐liquid‐based capillary column for GC was used to separate trifluoroacetylated fatty amines focusing on the analysis of a commercial sample. Using the ionic liquid column (isothermal mode at 200°C) it was possible to separate linear primary fatty amines from C₁₂ to C₂₂ chain length in less 25 min with MS identification. The log of the amine retention factors are linearly related to the alkyl chain length with a methylene selectivity of 0.117 kcal/mol for the saturated amines and 0.128 kcal/mol for the mono‐unsaturated amines. The sp² selectivity for unsaturated fatty amines also could be calculated as 0.107 kcal/mol for the ionic liquid column. The commercial sample was quantified by GC with flame ionization detection (FID). An LC method also was developed with a reversed phase gradient separation using acetonitrile/formate buffer mobile phases and ESI‐MS detection. Native amines could be detected and identified by their single ion monitoring chromatograms even when partial coelution was observed. The analysis of the commercial sample returned results coherent with those obtained by GC–FID and with the manufacturer's data.     

寡聚酸合锌(Ⅱ)的合成及对烟草病毒病的防治

在水-乙醇介质中,用寡聚酸钾与硫酸锌反应合成的寡聚酸合锌(Ⅱ)配合物,采用正交实验考察了V水∶V乙醇,反应温度,反应时间对螯合反应的影响,最优反应条件为:V水∶乙醇=1∶1;温度60℃;时间5h.通过红外光谱、紫外光谱和差热-热重分析测试手段对配合物进行了表征.红外光谱和紫外光谱均显示,Zn2+与寡聚酸配位.寡聚酸合锌(Ⅱ)配合物中金属配位方式为单齿和双齿配位.热分析表明,配合物稳定性较强.应用寡聚酸合锌(Ⅱ)防治烟草病毒病,试验结果表明寡聚酸合锌(Ⅱ)具有较强的防治烟草病毒病的作用.寡聚酸合锌(Ⅱ)作为新型的抗病毒制剂具有广阔的开发前景.     

An integrated method for spectrum extraction and compound identification from gas chromatography/mass spectrometry data

A method is presented for extracting individual component spectra from gas chromatography/mass spectrometry (GC/MS) data files and then using these spectra to identify target compounds by matching spectra in a reference library. It extends a published “model peak” approach which uses selected ion chromatograms as models for component shape. On the basis of this shape, individual mass spectral peak abundance profiles are extracted to produce a “purified” spectrum. In the present work, ion-counting noise is explicitly treated and a number of characteristic features of GC/MS data are taken into account. This allows spectrum extraction to be reliably performed down to very low signal levels and for overlapping components. A spectrum match factor for compound identification is developed that incorporates a number of new corrections, some of which employ information derived from chromatographic behavior. Test results suggest that the ability of this system to identify compounds is comparable to that of conventional analysis.     

Using computer modeling to predict and optimize separations for comprehensive two-dimensional gas chromatography

In order to fully realize the separation power of comprehensive two-dimensional gas chromatography (GC x GC), a means of predicting and optimizing separations based on operating variables was developed. This approach initially calculates the enthalpy (DeltaH) and entropy (DeltaS) for the target compounds from experimental input data, and then uses this information to simultaneously optimize all column and runtime variables, including stationary phase composition, by comparing the performance of large numbers of simulated separations. This use of computer simulation has been shown to be a useful aid in conventional separations. It becomes almost essential for GC x GC optimization because of the large number of variables involved and their very complex interaction. Agreement between experimental and predicted values of standard test samples (Grob mix) using GC x GC separation shows that this approach is accurate. We believe that this success can be extended to more challenging mixtures resulting in optimizations that are simpler and transferable between GC x GC instruments.     

Development of a new electron ionization/field ionization ion source for gas chromatography/time‐of‐flight mass spectrometry

We have developed a combined EI/FI source for gas chromatography/orthogonal acceleration time‐of‐flight mass spectrometry (GC/oaTOFMS). In general, EI (electron ionization) and FI (field ionization) mass spectra are complementary: the EI mass spectrum contains information about fragment ions, while the FI mass spectrum contains information about molecular ions. Thus, the comparative study of EI and FI mass spectra is useful for GC/MS analyses. Unlike the conventional ion sources for FI and EI measurements, the newly developed source can be used for both measurements without breaking the ion source vacuum or changing the ion source. Therefore, the combined EI/FI source is more preferable than the conventional EI or FI ion source from the viewpoint of the reliability of measurements and facility of operation. Using the combined EI/FI source, the complementarity between EI and FI mass spectra is demonstrated experimentally with n‐hexadecane (100 pg): characteristic fragment ions for the n‐alkane such as m/z 43, 57, 71, and 85 are obtained in the EI mass spectrum, while only the parent peak of m/z 226 (M⁺) without any fragment ions is observed in the FI mass spectrum. Moreover, the field desorption (FD) measurement is also demonstrated with poly(ethylene glycol)s M600 (10 ng) and M1000 (15 ng). Signals of [M+H]⁺, [M+Na]⁺ and [M+K]⁺ are clearly detected in the FD mass spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Fast Determination of Phenanthrene in Soil by Gas Chromatography-Mass Spectrometry Using Chemometric Resolution and Standard Addition Method

A method for fast determination of the component in complex samples by using gas chromatography‐mass spectrometry (GC‐MS) was developed and used for quantitative analysis of phenanthrene in soils. In the method, window independent component analysis (WICA) was used for resolving the mass spectrum and non‐negative immune algorithm (NNIA) was employed for obtaining the chromatographic profile. Therefore, spectral and chromatographic information of a specific component can be obtained from the measured GC‐MS data of overlapping and high background. Six soil samples collected from different places were analyzed. The tedious pretreatments in preparing the samples and the elution in the separation were simplified for speeding up the analysis. Due to the complexity of the matrix, standard addition method was adopted for the final quantification. The applicability of the method was validated with a spiked sample and the results of the six samples are reasonable.     

Identification of amphetamine isomers by GC/IR/MS

The methods of gas chromatography/Fourier transform infrared spectroscopy (GC/FTIR) and gas chromatography/infrared spectroscopy/mass spectrometry (GC/IR/MS) are evaluated for their ability to differentiate side chain isomers of amphetamine. It is found that absorption bands from 3000 to 2850 cm-1 and 900 to 650 cm-1 are most useful for differentiating the alkyl amines, while the bands from 1600 to 900 cm-1 are only useful for differentiating primary amines from the other substituted amines. The combination of GC/IR/MS is superior for differentiating these side chain isomers.     

Using comprehensive two-dimensional gas chromatography for the analysis of oxygenates in middle distillates I. Determination of the nature of biodiesels blend in diesel fuel

In the current energetic context (increasing consumption of vehicle fuels, greenhouse gas emission etc.) government policies lead to mandatory introduction in fossil fuels of fuels resulting from renewable sources of energy such as biomass. Blending of fatty acid alkyl esters from vegetable oils (also known as biodiesel) with conventional diesel fuel is one of the solutions technologically available; B5 blends (up to 5%w/w esters in fossil fuel) are marketed over Europe. Therefore, for quality control as well as for forensic reasons, it is of major importance to monitor the biodiesel origin (i.e. the fatty acid ester distribution) and its content when it is blend with petroleum diesel. This paper reports a comprehensive two-dimensional gas chromatography (GC x GC) method that was developed for the individual quantitation of fatty acid esters in middle distillates matrices. Several first and the second dimension columns have been investigated and their performances to achieve (i) a group type separation of hydrocarbons and (ii) individual identification and quantitation of fatty acid ester blend with diesel are reported and discussed. Finally, comparison of quantitative GC x GC results with reference methods demonstrates the benefits of GC x GC approach which enables fast and reliable individual quantitation of fatty acid esters in one single run. Results show that under developed chromatographic conditions, quantitative group type analysis of hydrocarbons is also possible, meaning that simultaneous quantification of hydrocarbons and fatty acid esters can be achieved in one single run.     

样品可否采用气相色谱法的判断

本文首先提出了在柱温下稳定的样品采用气相色谱法的两个基本条件,进而给出了是否满足k~′和K_1要求的判断方法。只要组分:①能以合适的是k~′从气相色谱柱中流出,②分离度K_1满足要求,样品即可考虑用气相色谱法,由检测器检测要求而引起的在溶质蒸汽压上的限制不是主要因素(检测器:FID),对k~′,可通过固定相特性参数结合柱子最高最低使用温度来进行判断;同时运用相应碳链长度(CCCL)概念、借助于结构和保留的关系,可求得不同物种在不同柱上满足k~′条件的碳数范围。而K_1的判断,如果给定柱系统中峰容量足够,链状化合物位置异构体间差异足够大,就可认为满足条件。     

电喷雾质谱在寡糖序列分析中的应用

选取具有不同结构特征的N-糖链、硫酸软骨素寡糖、人乳寡糖以及海洋来源的壳寡糖、褐藻胶寡糖、卡拉胶寡糖和硫酸岩藻寡糖等,对电喷雾质谱在寡糖的主链序列、分支位点、硫酸基取代位置确定、单糖组成和聚合度分析等方面的应用技术及碎片离子的断裂规律进行了总结.根据相邻同类碎片离子之间的质荷比差值可初步判断寡糖的单糖组成类型;通过与色谱分离技术联用或衍生化方法可提高寡糖的分辨率和离子化效率,并测得寡糖的分子量及聚合度;借助串联质谱及对寡糖还原端的特异性标记,可获得寡糖的还原端残基和部分序列信息;根据寡糖产生的特征碎片离子及其丰度大小可判断残基的特定位置和类型.另外,寡糖的分支通常作为一个整体发生糖苷键断裂或产生D离子,据此可判断分支点的位置;根据硫酸寡糖产生的特异性跨环断裂碎片,可以确定硫酸基的连接位置.这些规律和方法的总结为未知寡糖的结构和序列的分析提供了启发和指导.     

生物制药研究中的多维色谱

对全二维气相色谱(GC×GC)、全二维液相色谱(HPLC×HPLC)、多维毛细管电泳等多维分离技术在生物制药研究中的应用进行了综述,其中对作者所在研究组在全二维气相色谱应用于中药及固相萃取-液相色谱联用分析系统等方面的工作做了重点介绍。由所综述的生物制药研究得出结论：多维分离方法以其高分辨、快速、自动化等特点已经在生物制药领域显示出它的巨大优势,并将发挥更大的作用。     

GC/IMS and GC/MS analysis of pre-concentrated medical and biological samples

Ion mobility spectrometry (IMS) is a well-known analytical method for the detection of CWAs and explosives since many years. Coupling IMS to GC pre-separation, new application fields in medicine and biology could be opened, dealing with complex and humid mixtures. However, identification of unknowns in such a complex sample is challenging and can only be achieved by parallel GC/MS analysis, thus obtaining a proposal for the responsible compound for validation via reference substances by GC/IMS again. The available adsorption tools for such accompanying GC/MS analysis have their particular drawbacks (e.g. problematic quantification for SPME, high sample volumes for adsorption tubes). Therefore miniaturised adsorption needles (NeedleTrap) were applied to both GC/IMS and GC/MS for validation of their reproducibility. It could be demonstrated that the needles can even be used for appropriate quantification when the adsorbent and the sample volume are adapted properly to the concentration range, the compounds of interest and humidity of the sample. The method is very flexible with regard to the concentration range by variation of the sample volume (e.g. 20 mL for ppt_V, 10 mL for lower ppb_V or 1 mL for ppm_V) and with regard to the compounds of interest by application of common adsorption materials optimised for the relevant substance group. Such materials are available commercially in a broad variability. Therefore, the miniaturised adsorption needles are a helpful complementary sampling method for any GC/MS or GC/IMS investigations.     

Evaluation of glycosylation for quality assurance of antibody pharmaceuticals by capillary electrophoresis

The development of monoclonal antibody (mAb) pharmaceuticals has rapidly generated in this decade, and there are currently 23 FDA-approved mAb pharmaceuticals. Carbohydrate chains in mAb pharmaceuticals play important roles for the expression of their biological activities such as antibody-dependent cellular cytotoxicity, whereas the oligosaccharide profile is easily changed depending on the manufacturing conditions. Therefore, the evaluation of carbohydrate chains in detail is quite important for quality control in the development of mAb from early phases, but oligosaccharides in mAb have high heterogeneity and full characterization of oligosaccharide moiety in mAb has been a challenging target. Capillary electrophoresis (CE) is a powerful tool for the evaluation of glycan occupancy and oligosaccharide profile. This review focuses mainly on the application of CE to the analytical studies on glycosylation in mAb pharmaceuticals developed in our laboratory. The related techniques including the full-image microchip isoelectric focusing and the newly developed mass spectrometry technologies are also shown. The combination of the techniques described in this review will be a good guide for the evaluation of glycosylation for quality assurance of antibody pharmaceuticals by CE from the early stage of the development to the marketing stage.