两种螺旋藻核复合物结构特性的研究

从螺旋藻藻胆体中分离出两种复合物:核复合物(APC)和杆-核复合物(APCR),通过吸收光谱及其二阶导数光谱、荧光光谱研究了二者的结构和光谱特性,讨论了在这两种沉降系数分别为36S和16S的超分子复合物内几种连接多肽:L^29.5,L_C^8.9和LCM对复合物结构和功能的影响。     

PAN基活性碳纤维的研制及吸附性能

<正> 活性碳纤维(ACF)是在碳纤维的基础上发展起来的又一新品种,它是纤维经碳化后,再用氧化性气体进行活化而制得。它具有比表面积大、微孔发达吸附性能好、吸脱附速度快等优点。作为吸附剂可用于环境保护、喷漆、医疗用品、水的纯化、溶剂回收等方面。 本文采用的原纤是PAN纤维,其单体克分子组成为:丙烯腈:丙烯酸甲酯:衣康酸     

The Studies of the Heterogeneous Properties of Solid Surfaces by Means of the Derivatograph Q-1500 D

A simple method has been adopted to obtain an important information on the heterogeneous properties of materials studied, adsorbed liquid films and liquid-solid interactions. The method utilizes Q-TG mass loss and the first derivative Q-DTG mass loss curves with respect to temperature and time obtained during programmed liquid thermodesorption in quasi-isothermal conditions. The values of the adsorption capacity, total porosity of material, the value of active centers, desorption energy distribution and mesopore-size distribution functions obtained by this method are in good agreement with those estimated on the basis of independent methods. The theoretical and experimental results provided novel and unique data on the heterogeneity of solid surfaces, properties of liquid adsorbed films and thermal stability of the liquid/solid interfaces. This paper presents the more important results obtained so far in the studies the liquid/solid systems by means of the Paulik's classical and quasi-isothermal techniques. This revised version was published online in July 2006 with corrections to the Cover Date.     

Higher order alchemical derivatives from coupled perturbed self-consistent field theory

We present an analytical approach to treat higher order derivatives of Hartree-Fock (HF) and Kohn-Sham (KS) density functional theory energy in the Born-Oppenheimer approximation with respect to the nuclear charge distribution (so-called alchemical derivatives). Modified coupled perturbed self-consistent field theory is used to calculate molecular systems response to the applied perturbation. Working equations for the second and the third derivatives of HF/KS energy are derived. Similarly, analytical forms of the first and second derivatives of orbital energies are reported. The second derivative of Kohn-Sham energy and up to the third derivative of Hartree-Fock energy with respect to the nuclear charge distribution were calculated. Some issues of practical calculations, in particular the dependence of the basis set and Becke weighting functions on the perturbation, are considered. For selected series of isoelectronic molecules values of available alchemical derivatives were computed and Taylor series expansion was used to predict energies of the "surrounding" molecules. Predicted values of energies are in unexpectedly good agreement with the ones computed using HF/KS methods. Presented method allows one to predict orbital energies with the error less than 1% or even smaller for valence orbitals.     

Optimization of equilibrium geometries and transition structures

A modified conjugate gradient algorithm for geometry optimization is outlined for use with ab initio MO methods. Since the computation time for analytical energy gradients is approximately the same as for the energy, the optimization algorithm evaluates and utilizes the gradients each time the energy is computed. The second derivative matrix, rather than its inverse, is updated employing the gradients. At each step, a one-dimensional minimization using a quartic polynomial is carried out, followed by an n-dimensional search using the second derivative matrix. By suitably controlling the number of negative eigenvalues of the second derivative matrix, the algorithm can also be used to locate transition structures. Representative timing data for optimizations of equilibrium geometries and transition structures are reported for ab initio SCF –MO calculations.     

Studies of surface properties of Na- and La-montmorillonites

This paper presents possible applications of thermal analysis, sorptometry and porosimetry to study physico-chemical properties of Na- and La-montmorillonite samples, especially for determination of total surface heterogeneity. The quasi-isothermal thermogravimetric (Q-TG) mass loss and its first derivative (Q-DTG) curves with respect to temperature and time obtained during programmed liquid thermodesorption under quasi-isothermal conditions have been used to study adsorbed layers and heterogeneous properties of the Na- and La-montmorillonites. Calculations of the desorption energy distribution functions by analytical procedure using mass loss Q-TG and differential mass loss Q-DTG curves of thermodesorption under quasi-isothermal conditions of polar and non-polar liquid vapours preadsorbed on a material surface are presented. Parameters relating to porosity of samples were determined by sorptometry, mercury porosimetry and atomic force microscopy (AFM). From nitrogen sorption isotherms from sorptometry and porosimetry methods, the fractal dimensions of montmorillonites have been calculated. Moreover, a new approach is proposed to calculate fractal dimensions of materials obtained from Q-TG curve; this is compared with values obtained by the above methods. The total heterogeneous properties (energy distribution function and pore-size distribution functions) of samples studied were estimated. The radius and pore volume of the tested samples calculated on the basis of thermogravimetry, sorptometry and porosimetry techniques were compared and good correlations obtained.     

Ag nanowires coated with Ag/Pd alloy sheaths and their use as substrates for reversible absorption and desorption of hydrogen

When the surfaces of Ag nanowires were coated with thin sheaths of Pd/Ag alloys, they exhibited hydrogen absorption/desorption behaviors and capacities similar to those of pure Pd powders or nanotubes. The stronger mechanical strengths of these cable-like nanostructures also allowed them to undergo more absorption/desorption cycles with no morphological changes. These nanostructures can be used as a good model system to study the interaction between hydrogen and metal alloys with relatively low concentrations of Pd (<10%) with respect to structural, thermodynamic, and kinetic features.     

Solid-phase micro extraction (SPME) and headspace derivatization of clenbuterol followed by GC–FID and GC–SIMMS quantification

Solid-phase micro extraction (SPME) and on-fiber derivatization followed by Gas Chromatography coupled with Flame Ionization Detection (GC-FID) or Selected Ion Monitoring Mass Spectrometry (GC-SIMMS) allows for simple yet sensitive quantification for the hexamethyldisilazane derivative of the beta-agonist clenbuterol. Using an 85- micro m polyacrylate fiber, the analysis method is optimized with respect to extraction time, derivatization time and temperature, and solution pH. In addition, the use of a rapid temperature ramping injection port allows for optimization of fiber desorption conditions. Under optimal conditions, the limits of detection for the hexamethyldisilazane derivative of clenbuterol are 1.1 ppb by FID and 0.20 ppb by SIMMS.     

Problems of Quantitative Spectroscopic Measurements in Heterogeneous Catalysis: Molar Absorption Coefficients of Vibrations in Adsorbed Substances

Published data on the molar absorption coefficients and integral intensities A ₀ of vibrations in physically and chemically adsorbed molecules are reviewed. Analysis of published data shows that bonds characterized by high values of the dipole momentum derivative with respect to the normal coordinate change during adsorption toward decreasing this derivative, whereas bonds characterized by a low value of the derivative change toward increasing the derivative. Thus, adsorption results in a decrease in the difference in values of the dipole momentum derivative with respect to the normal coordinate of different bonds compared with the same bonds in the individual molecules. In addition, the interval of changing the molar absorption coefficients for the surface complexes are at least two orders of magnitude lower than that for the same bonds in the molecules in the gas phase. A series for the degree of easiness in detecting complexes on the catalyst surface (the series of decreasing the molar absorption coefficient) is proposed.     

Analysis of temperature programmed desorption (TPD) data for the characterisation of catalysts containing a distribution of adsorption sites

This paper discusses some methods of analysing TPD data for samples obeying first-order desorption kinetics and proposes several improvements to existing practice. The methods apply in the case when the Arrhenius parameters A and E for each site are independent of coverage, and thus are normally suitable for the characterisation of porous solids. An improved implementation of the condensation approximation method is proposed to gain an initial estimate of the adsorption site distribution. Further, a variation of the method is proposed that can be used when A is a function of E. The initial estimate of the distribution can be used to analyse data obtained by an interrupted TPD experiment, in which heating is halted at a specified temperature. This method provides a reliable method of determining the parameter A for a peak in the distribution. Finally, regularisation procedures for obtaining physically sensible distributions from "noisy" TPD data are discussed. It is shown that a penalty function based on the square of the second derivative of the distribution is normally most suitable for analysing TPD data, at least in the case when the L-curve method is used to select the regularisation parameter.     

Apparatus for infrared measurement of sorption/desorption in strained polymeric films

A new apparatus has been developed for optical measurement of sorption/desorption in transparent polymer films at a given strain or stress. The technique utilizes a chosen infrared absorption frequency of the diffusing vapor in a spectral region where the film has negligible absorption. From the time dependence of the IR absorption at this frequency the sorption/desorption behavior of the film may be determined at any strain or stress. The simultaneous measurement of mechanical relaxation as a function of the amount of sorbed vapor is also possible. The results presented here show the applicability of the apparatus for determining the transport and mechanical properties of a low-density polyethylene film in ethyl acetate vapor at 30°C.     

Non-Fickian water vapor sorption dynamics by Nafion membranes

Dynamics of water absorption from a saturated vapor and water desorption into dry air for Nafion 1100 EW ionomers have been measured for film thicknesses between 51 and 606 microm and at temperatures ranging from 30 to 90 degrees C. Water absorption and desorption exhibit two distinct non-Fickian characteristics: (1) desorption is 10 times faster than absorption and (2) the normalized mass change does not collapse to a single master curve when plotted against time normalized by membrane thickness squared, t/l2, for either absorption or desorption. Water desorption data were fit well by a model in which diffusion is rapid and interfacial mass transport resistance is the rate-limiting process for water loss. Water absorption is described by a two-stage process. At early times, interfacial mass transport controls water absorption, and at longer times, water absorption is controlled by the dynamics of polymer swelling and relaxation.     

Multivariable kinetic theory of the first order phase transitions

The problem of calculation of the steady state homogeneous nucleation rate in the multidimensional space of the variables describing a nucleus is considered. Within the framework of the theory proposed, expressions for the nucleation rate and the steady state distribution function of nuclei are derived. The expression for the nucleation rate is invariant with respect to the space dimensionality and, in particular, involves the result of the one-dimensional theory. The distribution function is obtained in the initial, physical variables. In connection with the analysis of restrictions on the current direction, the question of symmetry of the matrix of diffusivities is considered; on the basis of the detailed balance principle it is shown that this matrix is symmetric. The question of normalizing the equilibrium distribution functions is investigated and the physical picture of the equilibrium state is described. The procedure of reducing the multidimensional theory to the one-dimensional one is described.     

Molecular properties from perturbation theory: A Unified treatment of energy derivatives

The definition of a molecular property as a derivative of the electronic energy with respect to one or more applied perturbations is reviewed. The explicit enumeration of terms entering the derivative formulas is performed by considering in turn the various parameter spaces on which the energy and wave function depend. After deriving general expressions for first, second, and third derivatives for different types of perturbation, the parameter spaces involved in MCSCF and CI cases are identified and used to obtain expressions for the first and second derivatives. An example of an MCSCF third derivative is also given. In addition, the various equation systems defining the perturbed wave functions in each order are derived. Some attention is given to the efficient computer implementation of derivative calculations, and the present work is compared with that of other authors.     

A simple model of photoinduced lattice instability

A simple model is developed to describe lattice distortions following photon absorption by a molecular crystal. For excitation localised on the vibrational time scale, the classical motion of a one-dimensional lattice with realistic nearest neighbour interactions is examined. The lattice structure is initially unstable and relaxes via two competing mechanisms: one leads directly to a new symmetric equilibrium, the other produces an intermediate metastable asymmetric lattice structure. This second structure is a possible precursor to excimer formation and photochemical reaction. We present algebraic and numerical analyses to demonstrate that the phonon distribution before excitation determines the dominant relaxation mechanism. In this model, acoustic phonon modes near the zone boundary promote the excimer-like distortion.     

Temperature-dependent femtosecond photoinduced desorption in CO/Pd(111)

The desorption of CO from a Pd(111) surface following absorption of 120 fs pulses of 780 nm light occurs on two distinct and well-separated time scales. Two-pulse correlation measurements show a fast subpicosecond decay followed by a slower, approximately 40 ps decay. Simulations based on the two-temperature model of electron and phonon heat baths within the substrate, and an empirical friction model to treat coupling to the adsorbate, support the assignment of the desorption mechanism as an electron-mediated process. The photodesorption yield and overall width of the temporal response exhibit a marked dependence on the initial surface temperature in the 100-375 K range despite the much higher transient electronic temperatures (approximately 7000 K) achieved. The observed temperature dependences can be attributed directly to variations in the initial temperature within the frictional coupling picture. Simulations of this extended data set imply that the activation barrier to photoinduced desorption is equal in magnitude to that derived from thermal desorption experiments for this system within the limits of a one-dimensional Arrhenius desorption model. The simulations also imply that the slower decay is not the result of phonon-driven desorption. Though we cannot unambiguously determine the strength of the adsorbate-phonon coupling, our results suggest that its role is to moderate the degree of the adsorbate excitation.     

Adsorption and desorption of HCl on Pt(111)

The adsorption and desorption of HCl on Pt(111) is investigated by temperature programmed desorption, infrared reflection absorption spectroscopy, and low energy electron diffraction. Five peaks are identified in the desorption spectra prior to the onset of multilayer desorption. At low coverage ( < 0.25 monolayers (ML)), desorption peaks at approximately 135 and 200 K are observed and assigned to recombinative desorption of dissociated HCl. At higher coverages, desorption peaks at 70, 77, and 84 K are observed. These peaks are assigned to the desorption of molecularly adsorbed HCl. The infrared spectra are in agreement with these assignments and show that HCl deposited at 20 K is amorphous but crystallizes when heated above 60 K. Kinetic analysis of the desorption spectra reveals a strong repulsive coverage dependence for the desorption energy of the low coverage features ( < 0.25 ML). The diffraction data indicate that at low temperature the adsorbed HCl clusters into ordered islands with a (3 x 3) structure and a local coverage of 4/9 with respect to the Pt(111) substrate.     

Toward hypericin-derived potential photodynamic therapy agents

To optimize a hypericin derivative as a potential photodynamic therapy agent its light-induced singlet oxygen/superoxide radical formation capability should be enhanced and its long-wavelength absorption band should be bathochromically shifted to better match medicinal lasers. A heavy-atom-substituted derivative was realized by electrophilic iodination of hypericin to yield 2,5-diiodo-hypericin. Using photodestruction of bilirubin IX alpha this derivative was demonstrated to exhibit an enhanced light-induced singlet oxygen/superoxide radical formation capability as compared to hypericin. With respect to a bathochromically shifted derivative styryl residues were attached to the methyl groups of hypericin by de novo ring synthesis. Although the long-wavelength absorption band of this derivative displayed a bathochromic shift of nearly 40 nm it unfortunately immediately underwent an intramolecular [2 + 2] cycloaddition to yield the corresponding cyclobutane derivative in which the added conjugation system became interrupted.     

Simulation of atomic absorption signals: A kinetic model with two independent sources

A kinetic model of atomization processes based on the solution of one-dimensional diffusion equation with two independent sources is proposed. One of the sources describes the atomization of atoms from the graphite furnace surface, while another one describes the atom formation inside the walls of the furnace and their subsequent outflow into the analytical zone. This mechanism is used to describe electrothermal atomization of Cu and Ag. The simulations show that the form of atomic absorption signal of Cu is determined to the great extent by the processes of desorption from the graphite surface and diffusion inside the graphite. The tailing of the back edge of absorption profile can be explained by the rather slow diffusion process of copper atoms in the graphite. At the same time, for the atomization of Ag, the process of separation of single atoms from clusters is the limiting process.A new interpretation for the shift of absorbance maximum as the initial mass of Ag increases is proposed.