Distribution studies of metal ions on stannic arsenate in butanol-HNO3 systems: Quantitative separation of Ni−Fe,Ni−Cu,Cd−Hg and Pb−Hg

Summary This paper deals with systematic distribution studies of metal ions on stannic arsenate in butanol-HNO₃ systems. K_d values of metal ions have been determined by the batch process in solvent systems containing varying proportions of butanol and 50% HNO₃. Quantitative binary separations of Ni–Fe, Ni–Cu, Cd–Hg and Pb–Hg have been obtained on the basis of information from the studies.     

Infrared and raman spectra,vibrational assignments,normal coordinate analysis,and ab initio calculations of methyltrifluoromethyldisulfide and bis(trifluoromethyl)disulfide

The infrared and Raman (3500-35 cm^–1) spectra of gaseous and solid methyltrifluoromethyldisulfide, CF₃SSCH₃, and bis(trifluoromethyl)disulfide, CF₃SSCF₃, have been recorded. Additionally, the Raman spectra of the neat liquids have been obtained and qualitative depolarization values have been measured. These vibrational data have been interpreted, for both molecules, on the basis that the C-S-S-C dihedral angle is approximately 90°. Vibrational assignments are given for both molecules and are supported by normal coordinate calculations utilizing ab initio Hartree-Fock gradient calculations with the 3-21G^* basis set to obtain the frequencies for the normal modes and potential energy distributions. The CH₃ and CF₃ torsional modes have been observed at 140 and 48 cm^–1, respectively, for CF₃SSCH₃, from which periodic barriers of 485 cm^–1 (1.39 kcal mol^–1) and 853 cm^–1 (2.44 kcal mol^–1), respectively, have been calculated. Complete equilibrium geometries have been determined for both molecules by ab initio calculations employing both 3–21G and 6–31G basis sets. The structural parameters for bis(trifluoromethyl)disulfide are compared to those suggested from electron diffraction studies. The results are compared to corresponding quantities obtained for some similar molecules.Taken in part from the thesis of M. M. Bergana which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree.     

Osmotic coefficients of dilute aqueous solutions of unsymmetrical cobalt-amine type salts at 0°C

The osmotic coefficients of dilute aqueous solutions of [Co(pn)₃]X₃ [pn=1,2-diaminopropane and X=Cl^–, Br^– and (NO₃)^–] and [Co(tn)₃]X₃ (tn=1,3-diaminopropane and X=Cl^– and Br^–) have been measured from 0.00 to 0.02 mol-kg^–1 at 0°C by the freezing point method. The results have been compared with those obtained from the numerical integration of the Poisson-Boltzmann equation.     

Water in melts: Raman spectral investigation of the molten Ca(NO3)2·4H2O−KNO3 system

The Raman spectra of molten mixtures of Ca(NO₃)₂\4H₂O–KNO₃ have been examined, covering the concentration range of 0–70 mole% KNO₃. The frequencies in the spectra of the mixtures have been found to change slightly with concentration. Striking variations in the band shapes have been observed in the regions corresponding to the O–H stretching mode (2850–3850 cm^–1) and the v₄-NO ₃ ^– mode (700–750 cm^–). The results are discussed in terms of perturbed quasi-lattice structure for the melt, in which there could be a displacement of water molecules in the first coordination sphere around Ca²⁺ by the NO ₃ ^– ion.     

Apparent molal volumes of aqueous solutions of bis-tetraalkylammonium salts at 25°C: Methylene-group contribution to the limiting molal volume

Densities of aqueous solutions of a series of polymethonium chloride and bromide salts (CH₃)₃–N–(CH₂)_n–N–(CH₃)₃X₂ have been measured at 25°C. Apparent molal volumes have been calculated, and methylene-group contributions to the limiting apparent molal volumes °_v have been estimated. Constant values of the methylene-group contribution of 16.5 and 17.0 cm³-mole^–1 were obtained for the bromide and chloride salts, respectively. These values are consistent with methylene-group contributions reported for other series of organic electrolytes.     

Thermodynamics of Aqueous Diethylenetriaminepentaacetic Acid (DTPA) Systems: Apparent and Partial Molar Heat Capacities and Volumes of Aqueous H2DTPA3−, DTPA5−, CuDTPA3−, and Cu2DTPA− from 10 to 55°C

Apparent molar heat capacities and volumes have been determined for aqueous solutions of the mixed electrolytes Na₅DTPA + NaOH, Na₃CuDTPA + NaOH, and NaCu₂DTPA + NaOH, and the single electrolyte Na₃H₂DTPA (DTPA=diethylenetriaminepentaacetic acid) at temperatures from 10 to 55°C. The experimental results have been analyzed in terms of Young's rule with the Guggenheim form of the extended Debye–Hückel equation and the Pitzer ion-interaction model. These calculations led to standard partial molar heat capacities and volumes for the species H₂DTPA^3–(aq), DTPA^5–(aq), CuDTPA^3–(aq), and Cu₂DTPA^–(aq) at each temperature. The partial molar properties at 0.1 m ionic strength were also calculated. The standard partial molar properties were extrapolated to elevated temperatures with the revised Helgeson–Kirkham–Flowers (HKF) model. Values for the partial molar heat capacities from the HKF model have been combined with the literature data to estimate the ionization constants of H₂DTPA^3–(aq) and the formation constant of the CuDTPA^3–(aq) copper complex at temperatures up to 300°C.     

Co-hydrolysis products of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions: Part 2 [1]

²⁹Si NMR peaks due to species with the double four-membered ring siloxane backbone composed of both Si(O^–)_4/2 and CH₃Si(O^–)_3/2 units, (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=1–3), formed by co-hydrolysis of tetraethoxysilane and methyltriethoxysilane in the presence of tetramethylammonium ions in methanol have been assigned. It has been found that ²⁹Si NMR peaks due to Si(OSi)₃(O^–) units shift to lower frequencies by replacement of the adjacent Si(O^–)_4/2 units by CH₃Si(O^–)_3/2 units, in other words, with increasing m value in Si[OSi(O^–)₃]_{3 – m} [OSi(CH₃) (O^–)₂] _m (O^–) (m=0–2). Peaks from CH₃ Si(OSi)₃ units in the species have also appeared as separated due to the kind of neighbor structural units. On the basis of the assignments, positions of CH₃Si(O^–)_3/2 units in the cubic octameric siloxane framework of (CH₃) _n Si₈O _{20 – n} ^{/(8 – n) –} (n=2, 3), for both of which three isomers are present, have been estimated.     

Preparation of tritium-labeled prostaglandin E3

Conditions for the biosynthesis of PGE₃ from eicosa-5,8,11,14,17-pentaenoic acid using an enzyme system isolated from ram seminal vesicles have been worked out. Tritium-labeled PGE₃ has been obtained in good yield with a molar radioactivity sufficient for performing many biological investigations.Institute of Molecular Genetics, Academy of Sciences of the USSR, Moscow. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 319–322, May–June, 1985.     

Theoretical investigation of changes in the thermodynamic properties of water in the region near an electrode upon the discharge of an hydroxonium ion

A method for investigating solutions in the region near an electrode has been developed in the framework of the Monte Carlo method. The energies of the reorganization of water upon the transfer of an electron to a hydroxonium ion from the unpolarized surface of an absolutely solid charged electrode in the range of surface charge densities from +0.056 to –0.640 C/m² and upon the reverse process have been calculated. The hydration energies of an H₃O⁺ cation and an H₃O^– radical in the region near an electrode have been calculated. The effective interactions of an ion and a nonpolar molecule with an electrode in a solution have been analyzed.Translated from Teoreticheskaya i Éksperimental/naya Khimiya, Vol. 26, No. 5, pp. 596–600, September–October, 1990.     

The synthesis and properties of zeolite CF-3

The novel zeolite CF-3, with a high ratio of SiO₂/Al₂O₃ and a characteristic X-ray powder diffraction pattern, has been synthesized hydrothermally from a TMEDA-Na₂O–SiO₂–Al₂O₃–H₂O system at 200°C. The molar composition of CF-3 is (0.4–0.6)Na₂O·(1.5–6.3)TMEDA·Al₂O₃·(80–400)SiO₂·(0–17)H₂O·CF-3 is similar to ZSM-39 and melanophlogite, which have a clathrate-type structure.     

Characterization of manganese–gallium mixed oxide powders

Mn---Ga mixed oxides have been prepared by coprecipitation of the corresponding oxo-hydroxides as powders and have been characterized in relation to their structural and optical properties. The materials have been characterized by XRD, TG-DTA, skeletal IR and UV–visible–NIR spectroscopies. Large solubility of Mn in the diaspore type α-GaOOH oxo-hydroxide has been found. The spinel related structures of hausmannite Mn₃O₄ and of β-gallia present large reciprocal solubilities at least in a metastable form. At high temperature also bixbyite-type α-Mn₂O₃ solid solutions containing up to 20% at. Ga have been observed.     

Principles of modeling in the study of conformations of histones

A study has been made by the CD method of the conformational potentialities of the polypeptides (Gly-Lys-Gly)_n and (Ala-Lys-Ala)_n and fragments of the terminal sections of histones H4 (the sequence 1–16), H2B (1–21), and H1 (152–184), and they have been used as models of histones in complex formation with DNA under various conditions of the medium.V. I. Nikitin Institute of Chemistry, Tadzhik SSR Academy of Sciences, Dushanbe. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 391–398, May–June, 1989.     

Pulse radiolysis studies on the reactions of 3-pyridinol with oxidizing radicals

Reaction rate constants for the reactions of 3-pyridinol with oxidizing radicals viz. OH, N₃, Br ₂ ^– , Cl ₂ ^– , SO ₄ ^– and O^– have been determined in aqueous solutions at different, pH's. Absorption spectra of the product transient species have been recorded in the 320–600 nm region. In the alkaline region (pH 13) the N₃ reaction product decays in two steps and O^– does not bring about one-electron oxidation. Similarly, at neutral pH, SO ₄ ^– does not cause selective one-electron oxidation of 3-pyridinol.     

Electrodeposition of Lu on W and Al electrodes: Electrochemical formation of Lu–Al alloys and oxoacidity reactions of Lu(III) in the eutectic LiCl–KCl

The electrodeposition of lutetium on inert electrodes and the formation of lutetium–aluminium alloys were investigated in the eutectic LiCl–KCl in the temperature range 673–823 K. On a tungsten electrode, the electroreduction of Lu(III) proceeds in a single step and electrocrystalization plays an important role. Experimental current–time transients are in good agreement with theoretical models based on either instantaneous or progressive nucleation with three dimensional growth of the nuclei, depending on the working temperature. The diffusion coefficient of Lu(III) was determined by chronopotentiometry by applying the Sand equation. The activation energy for diffusion was found to be 31.5 ± 1.3 kJ mol⁻¹. Al₃Lu and mixtures of Al₃Lu and Al₂Lu, characterized by XRD analysis and SEM, were obtained from the LiCl–KCl melt containing Lu(III) by potentiostatic electrolysis using an Al electrode. The activity of Lu and the standard Gibbs energies of formation for Al₃Lu were estimated from open-circuit chronopotentiometric measurements. The E–pO²⁻(potential–oxoacidity) diagram for Lu–O stable compounds in LiCl–KCl at 723 K has been constructed by combining theoretical and experimental data. In this way, the apparent standard potential for the Lu(III)/Lu system has been determined by potentiometry. Potentiometric titrations of Lu(III) solutions with oxide donors, using a yttria stabilized zirconia membrane electrode “YSZME” as a pO²⁻ indicator electrode, have shown the stability of LuOCl and Lu₂O₃ in the melt and their solubility products have been determined at 723 K.     

Infrared Spectra of Krypton Solutions of Methylamine

Variable temperature (–105 to –145°C) studies of the infrared spectra (3500–400 cm^–1) of methylamine, CH₃NH₂, dissolved in liquid krypton have been recorded. From these data, the hydrogen bonding enthalpy has been determined to be 530 ± 29 cm^–1 (6.34 ± 0.35 kJ/mol). The elusive ₁₃ and ₁₄ fundamentals, which are strongly mixed CH₃ rock and NH₂ twist, have been observed at 1244 and 876 cm^–1, respectively. These assignments are supported by frequency predictions from ab initio MP2/6-31G(d) calculations where the predicted infrared intensities for these two vibrations are 0.054 and 0.002 km/mol. The ab initio predicted infrared spectrum compares very favorably with that observed in the krypton solution. Normal coordinate calculations have also been carried out for four other isotopomers of methylamine, CH₃NHD, CH₃ND₂, CD₃NH₂, and CD₃ND₂ and vibrational assignments given from previously reported infrared spectra of matrix isolated samples. The Raman spectrum of these latter three isotopes, along with the normal species, have been predicted from MP2/6-31G(d) calculations and the results compared to the experimental spectra. The equilibrium structural parameters have been obtained from ab initio calculations utilizing several different basis sets with full electron correlation by the perturbation method to second order. These predicted values are compared to the previously reported experimental structural parameters.     

Raman and Infrared Spectra, Ab Initio Calculations, Normal Coordinate Analysis, and Conformational Stability of 2-Methoxypropene

The Raman (3500–40 cm^–1) and infrared (3500–70 cm^–1) spectra of gaseous and solid 2-methoxypropene, CH₃O(CH₃)C=CH₂, and the isotopomers, CD₃O(CH₃)C=CH₂ and CH₃O(CD₃)C=CD₂ have been recorded. In addition, the Raman spectra of the liquids have been recorded with qualitative depolarization measurements. All of these data indicate that only one conformer is present in the fluid phases at ambient temperature and this form is the cis conformer, which remains in the solid. Assignments are provided for the fundamentals of all three isotopomers for the cis conformer with C_s symmetry. The far-infrared spectra of all three isotopic species have been recorded at a resolution of 0.1 cm^–1 in the gas and 1.0 cm^–1 in the solid. The parameters of the potential function governing the asymmetric torsion are determined to be V₃ = 1485 ± 9 cm^–1 and V₆ = –55 ± 4 cm^–1 for the d₀ compound, where only two terms were determined, since a second conformer was not evident. The barrier to internal rotation for the methyl group attached to the oxygen atom is 1370 ± 8 cm^–1 and the C—CH₃ barrier is 772 ± 5 cm^–1. Ab initio calculations with full electron correlation have been carried out by the perturbation method to second order to obtain the equilibrium structural parameters, harmonic force constants, fundamental frequencies, infrared intensities, Raman activities, depolarization values, and conformational stability. The predicted values have been compared to the experimental values where appropriate.     

Quantum Chemical Calculation of Conformations and Rotation Barriers of Functional Groups in Arylsulfonyl Halides

The semiempirical PM3 method is used to calculate the potential functions of internal rotation of the functional groups –SO₂Cl, –NO₂, –CH₃, –OCH₃, and –NH₂ of benzenesulfonyl halide molecules (PhSO₂Hal, Hal = F, Cl, Br, I) and twelve substituted derivatives of benzenesulfonyl chloride. Molecular conformations have been determined and internal rotation barriers of the functional groups have been calculated. For meta- and para-substituted benzenesulfonyl chlorides, the projection of the S–Hal bond is perpendicular to the plane of the benzene ring. The rotation barriers of the –SO₂Hal group of benzenesulfonyl halides increase in the series Hal = F, Cl, Br, I. The rotation barriers of the –SO₂Cl group of benzenesulfonyl chloride with meta- and para-substituents slightly increase with the electron-donor properties of the substituent. The rotation barriers of the functional groups of ortho-substituted benzenesulfonyl chlorides are 3 or 4 times as high as those of the meta- and para-isomers. For para-substituted benzenesulfonyl chlorides, the rotation barriers of the functional groups increase in the order –CH₃, –NO₂, –SO₂Cl, –OCH₃, –NH₂.     

Photoreduction of rhenium(VII) in hydrochloric and sulfuric acids and their mixtures

Pulse photolysis has been used to investigate the photochemical reactions that take place in the series of oxochloride complexes of Re(VII), Re(VI), and Re(V) in concentrated hydrochloric and sulfuric acids and their mixtures. The kinetics of the formation and decay of the short-lived complex ReOCl ₅ ^– have been studied as a function, of the composition of the medium (the concentration of the acids and water). The causes of the stabilization of ReOC ₅ ^– in concentrated H₂SO₄ have been elucidated. It has been found that the anion radical Cl ₂ ^– formed in the photolysis of HCl oxidizes the complex ReOCl ₅ ^2– to ReOCl ₅ ^– .Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 22, No. 3, pp. 296–302, May–June, 1986.     

Phospholipids of the cotton plant of variety Tashkent-3. II. Structure of the main phospholipid fractions

Summary 1. Individual fractions of phosphatidylcholines, phosphatidylethanolamines, phosphatidylinositols, and the X₂ and X₃ phospholipids have been obtained from the combined phospholipids, freed from carbohydrates, of the seed kernels of the cotton plant of variety Tashkent-3.2. The compositions and position distributions of the fatty acids in the main fractions of phospholipids have been studied.3. The possible molecular composition of the phosphatidylcholines, phosphatidylethanolamines, and phosphatidylinositols have been calculated.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 155–158, March–April, 1976.     

Role of radical ions in the thermally stimulated luminescence of uranium doped BaCO3 system

Electron paramagnetic resonance (EPR) studies of -irradiated uranium doped BaCO₃ have shown the formation of CO₃ ^–, CO₂ ^–, O₃ ^– and O₂ ^– ions. Thermally stimulated luminescence (TSL) glow curves of the -irradiated samples in the 300–600 K range have exhibited an intense peak around 360 K and a weak one around 440 K. The trap parameters for these peaks have been determined from TSL data. Spectral studies of the glow have revealed emission around 566, 583 and 590 nm characteristic of the uranate ion. From studies on the thermal stabilities of the radical ions, it has been inferred that the glow peak around 360 K is associated with the thermal destruction of O₂ ^– ion and the peak around 440 K is associated with the thermal destruction of CO₃ ^– ion.