基于变换热力学的三维任意形状热斗篷设计

在变换热力学的基础上,通过坐标变换的方法,推导出三维任意形状热斗篷导热系数的通解表达式,并进行了全波仿真验证.结果表明:热流均能绕过保护区域流出,保护区域的温度保持不变,而且热斗篷外的温度场并没有破坏,具有很好的热保护和热隐身的效果.这一方法把变换热力学从二维拓展到三维,具有普遍的适用性.同时,这种技术为热流流动路径和目标温度场的控制奠定了理论基础,在微芯片、电动机的保护以及目标热隐身上有潜在应用.     

Performance investigation of nanoscale thermal cloak by the perforated silicon film

In recent years, nanoscale thermal cloak, as a representative of nanoscale heat flux regulation devices, has attracted a lot of attention from researchers. However, the existing design methods are relatively complicated and all adopt constant temperature boundaries, the temperature changes constantly in the real environment, which greatly hinders its engineering applications. In this paper, inspired by phonon localization theory, we construct a nanoscale thermal cloak by a perforated silicon membrane and evaluate its cloaking performance and dynamic response. Results show that when the perforated area is fixed, the more the number of holes, the better the cloaking performance. In addition, the nanoscale thermal cloak still exhibits good cloaking performance in the dynamic environment. Finally, the cloaking mechanism is analyzed by calculating the phonon density of states (PDOS) and mode participation rate (MPR), and the reduction of thermal conductivity in the functional region is attributed to phonon localization.     

非均匀背景中任意柱状热斗篷的研究与设计

在变换热力学的基础上,通过坐标变换的方法严格推导出在层状背景和渐变背景下二维任意形状热斗篷导热系数的通解表达式,并在此基础上设计出非均匀背景下二维非共形热斗篷.全波仿真结果表明:在不同背景下,热流均能绕过保护区域流出,保护区域的温度保持不变,而且热斗篷外的温度场并没有破坏,具有很好的热保护和热隐身的效果.这一方法考虑到背景的复杂性,更加贴近工程实际应用,为未来灵活控制热流传递提供了一种可行的方法,对目标热隐身和热保护具有重要借鉴意义.     

While rotating while cloaking

Invisible optical and thermal cloaking have been explored as the typical demonstrations of the transformation optics and thermotics theory. However, the existing cloaks are realized by only one-coordinate transformation, and the cloaking layout, i.e. the form of electromagnetic wave/heat passing around the invisible region, is single for a long time. Here, we propose a new rotated thermal cloak which can unify the conventional cloaking and rotating together, and realize the while-rotating–while-cloaking effect. The required anisotropic thermal conductivity tensor is deduced from the new geometric mapping. Though rotated, the heat flux can be tuned around the central invisible region perfectly by the proposed rotated thermal cloak. The underlying physics is explored by comprehensive analysis of the distribution of the thermal conductivity tensor, which is further compared with those of the conventional cloak and rotator. The experimental feasibility is also discussed by validating the practical while-rotating–while-cloaking effect through a proof-of-concept design. The proposed rotated thermal cloak is expected to extend the possibility of cloaking scheme, and open avenues for the multiple coordinate transformation in counterpart physical fields, like optics, electrics, acoustics, magnetics, mechanics, etc.     

任意横截面柱形热斗篷研究与设计

基于变换热力学,导出了具有非共形任意横截面的柱形热斗篷热导率表达式,并在此基础上设计了具有非共形横截面的柱形热斗篷.全波仿真结果表明,热斗篷迫使外部热流绕过斗篷,导致隐身区域热通量为零,从而具有热保护功能;同时,热流绕过斗篷后将恢复原来的温度场分布,使其具有完美热隐身功能.此外,基于所导出的变换媒质热导率表达式,设计并求解了具有规则共形和非规则共形横截面的柱形热斗篷,发现它们同样具有热保护和完美热隐身功能.这表明通过选择适当的边界函数,所得变换媒质热导率表达式可用于设计任意横截面柱形热斗篷,具有普遍的适用性,这种技术在计算机芯片、卫星和航天器等的热保护中有潜在应用.     

基于拉普拉斯方程的任意形状热斗篷研究与设计

如何灵活地控制和操纵热流是目前研究的热点.本文基于拉普拉斯方程提出了一种设计任意形状热斗篷的方法.对于形状规则的热斗篷,在特定边界条件下求解拉普拉斯方程得到了斗篷区域材料的热导率分布解析表达式;对于不规则形状的热斗篷,通过数值求解拉普拉斯方程得到了斗篷区域材料的热导率参数分布.全波仿真结果表明,所设计的二维和三维任意形状热斗篷内部隐身区域的热通量为零,从而具有热保护功能;同时,热流绕过斗篷后温度场恢复原来的分布,实现了完美隐身功能.这项研究为解决热斗篷内外边界非共形问题提供了一种可行的方法,对热保护器件的设计和制备有指导意义.     

Nanoscale thermal cloaking by in-situ annealing silicon membrane

With the advent of thermal metamaterials, many new thermal functionalities have been proposed, like thermal cloaking, concentrating, etc. However, these thermal functionalities are based on the transformation thermotics or scattering cancellation technique, which, derived from Fourier's law, cannot apply to the micro-/nanoscale counterparts. In this paper, we design a nanoscale thermal cloak based on a crystalline silicon (Si) membrane and investigate the in-plane phonon transport via non-equilibrium molecular dynamics (NEMD) simulation by in-situ tuning the thermal conductivity of the thermal cloak from crystalline Si to amorphous Si. The two-dimensional temperature profile is obtained, and the thermal cloaking effect is evaluated by the ratio of heat flux. By analyzing the phonon density of state (PDOS) and the mode participation ratio (MPR), the mechanism can be attributed to the phonon localization in the annealed cloaking region. The proposed nanoscale thermal cloak by in-situ tuned thermal conductivity, may trigger the development of nanoscale thermal functionalities and open avenues for and thermal management for nano-photonics and nano-electronics.     

Construction and mechanism analysis on nanoscale thermal cloak by in-situ annealing silicon carbide film

In recent years,there is a strong interest in thermal cloaking at the nanoscale,which has been achieved by using graphene and crystalline silicon films to build the nanoscale thermal cloak according to the classical macroscopic thermal cloak model.Silicon carbide,as a representative of the third-generation semiconductor material,has splendid properties,such as the high thermal conductivity and the high wear resistance.Therefore,in the present study,we build a nanoscale thermal cloak based on silicon carbide.The cloaking performance and the perturbation of the functional area to the external temperature filed are analyzed by the ratio of thermal cloaking and the response temperature,respectively.It is demonstrated that silicon carbide can also be used to build the nanoscale thermal cloak.Besides,we explore the influence of inner and outer radius on cloaking performance.Finally,the potential mechanism of the designed nanoscale thermal cloak is investigated by calculating and analyzing the phonon density of states(PDOS)and mode participation rate(MPR)within the structure.We find that the main reason for the decrease in the thermal conductivity of the functional area is phonon localization.This study extends the preparation method of nanoscale thermal cloaks and can provide a reference for the development of other nanoscale devices.     

Three-dimensional thermal illusion devices with arbitrary shape

Since the concept of invisible cloak was proposed by Pendry and Leonhardt in 2006, many researchers have applied the theory of coordinate transformation to thermodynamics and overcome the complexity of inhomogeneous and anisotropic of material parameters. However, only two-dimensional(2 D) thermal illusion devices are researched recently. According to this situation, our study focuses on three-dimensional(3 D) thermal illusion devices including shrinker(or invisible cloak),concentrator, amplifier, reshaper, and rotator with arbitrary shape in a general way. In this paper, the corresponding material parameters of thermal illusion devices mentioned above are derived based on the theory of transformation thermodynamics and the simulated results agree well with the theoretical derivations. In addition, the conventional invisible cloak just controls the temperature gradient rather than the temperature value which is more concerned in physical applications. Here,we find that the temperature value of the cloaked object can be controlled by adjusting the location of the original point of the coordinate system.     

Ellipsoidal Thermal Concentrator and Cloak with Transformation Media

Thermal concentrators and cloaks with ellipsoidal shapes are designed by utilizing the transformation thermotics method and finite element simulations.The thermal conductivities for the concentrator and cloak are directly derive in Cartesian coordinates.The simulation results show that the ellipsoidal thermal concentrator can focus heat flux into a central region and that the ellipsoidal thermal cloak can guide heat flux around the cloaked region smoothly without disturbing the external temperature distribution and heat flux.The present method can be extended to design arbitrarily shaped thermal metadevices with novel properties.     

基于主动声学超材料的圆柱声隐身斗篷设计研究

基于多层复合材料结构的二维声隐身斗篷设计思想, 利用主动隔膜声学空腔有效密度可以任意控制这一特性, 设计了主动声学超材料下的无限长圆柱声隐身斗篷. 给出了主动隔膜声学空腔单元的声电元件类比模拟电路图和具体的有效密度控制方法. 进行了主动声学超材料声隐身斗篷的结构建模, 并对平面入射波入射下此圆柱隐身斗篷周围声压分布场进行仿真计算. 结果表明, 平面波在一定频率范围内可以毫无阻碍地透过圆柱斗篷, 似乎不存在这种障碍物, 达到声隐身效果. 同时, 计算了主动声材料斗篷下总散射截面随频率变化曲线, 研究了此斗篷隐身效果随频率的变化特性. 本文从主动控制角度探讨实验实现隐身斗篷的技术问题, 有望给声隐身斗篷实验设计提供一条新的技术途径.     

热超构材料：几何结构、工作机制与新奇性质

因为在热保护、热探测和热管理领域存在重要的应用价值,自由操控宏观热流一直是人类的 一个梦想。热超构材料正是为此目的应运而生,它是电磁超构材料在热学领域的延伸。在此,我将 综述该领域自2008 年诞生以来取得的若干研究进展,其将主要包括以下新奇热现象或功能器件： 热隐身;热聚集;热旋转;宏观热二极管;热伪装;热透明;热晶体;环境温差中零能耗保温;宏 观热网络中反常热传导;热对流隐身、聚集、伪装;热辐射制冷。我将介绍与之相关的微观或宏观 传热机制,这些机制可以通过以下理论或方法来理解或阐述：变换热学理论、Laplace 方程、热声 子能带理论、相变理论、变换热对流理论、热辐射制冷理论。我也将介绍这些材料从基础研究到工 业应用的发展前景。     

Examination of the Thermal Cloaking Effectiveness with Layered Engineering Materials

The concentrically layered thermal cloaks with isotropic materials could realize the equivalent thermal cloaking effect with Pendry's cloak,while the effectiveness is scarcely investigated quantitatively.Here we examine the cloaking effectiveness quantitatively by evaluating the standard deviation of the temperature difference between the simulated plane with the layered thermal cloak and Pendry's thermal cloak.The design rules for the isotropic materials in terms of thermal conductivity and layer thickness are presented.The present method could quantitatively evaluate the cloaking effectiveness,and could open avenues for analyzing the cloaking effect,detecting the(anti-) cloaks,etc.     

Isotropic Thermal Cloaks with Thermal Manipulation Function

By extending the conventional scattering canceling theory,we propose a new design method for thermal cloaks based on isotropic materials.When the objects are covered by the designed cloaks,they will not disturb the temperature profile in the background zone.In addition,if different inhomogeneity coefficients are selected in the thermal cloak design process,these cloaks can manipulate the temperature gradient of the objects,i.e.,make the temperature gradients higher,lower,or equal to the thermal gradient in the background zone.Therefore,thermal transparency,heat concentration or heat shield effects can be realized under a unified framework.     

一种适用于对称截面的主动式热斗篷的研究

直接求解导热方程对具有自适应热源的可控式热隐身技术进行数值研究，探索热流控制方法及隐身效果，推导出均匀背景下二维对称截面热斗篷热隐身区域自适应热源分布的通解.仿真结果表明：对于任意对称截面斗篷，自适应热源都能使得扰动后的温度场很好地恢复到背景温度场，达到热隐身的目的.     

隐声衣结构设计和实验研究新进展

隐声衣是一项使物体隐藏于声场的新技术,与传统吸声方式相比,隐声衣消除回波时不会在目标背后留下声影区。隐声衣的物理实现是重点研究方向之一,利用具有特殊性质的材料或结构消除散射是获得隐声效果的主要途径。文章综述了隐声衣研究在结构设计和实验方面的几项新发展。包括基于超常材料的隐声衣、基于温度递度的隐声衣、应用反演设计方法的隐声衣、有源隐声衣等,主要介绍隐声衣机理和结构设计方面的新思想,以及新型人工材料和人工结构在隐声衣研究中的应用。     

Cylindrical invisibility cloak with simplified material parameters is inherently visible

It was proposed that perfect invisibility cloaks can be constructed for hiding objects from electromagnetic illumination [J. B. Pendry, D. Schurig, and D. R. Smith, Science 312, 1780 (2006)10.1126/science.1125907]. The cylindrical cloaks experimentally demonstrated [D. Schurig, Science 314, 977 (2006)10.1126/science.1133628] and theoretically proposed [W. Cai, Nat. Photon. 1, 224 (2007)10.1038/nphoton.2007.28] have however simplified material parameters in order to facilitate easier realization as well as to avoid infinities in optical constants. Here we show that the cylindrical cloaks with simplified material parameters inherently allow the zeroth-order cylindrical wave to pass through the cloak as if the cloak is made of a homogeneous isotropic medium, and thus visible. To all high-order cylindrical waves, our numerical simulation suggests that the simplified cloak inherits some properties of the ideal cloak, but finite scatterings exist.     

Carpet Cloak Design for Rough Surfaces

Conventional carpet cloak structures have been utilized to conceal the objects located on a planar perfect electric conductor surface. We systematically investigate hiding arbitrarily shaped objects on a rough surface, as a more general and practical scenario. In addition, the required cloak is designed considering different boundary conditions for the surface beneath the object, despite the previous studies. To achieve an invisibility cloak, taking advantage of linear coordinate transformation, a simple homogeneous material is obtained to realize the cloak structure, facilitating the fabrication processes. Numerical simulations validate the performance of the proposed cloaking method. Therefore, the proposed structure is capable of cloaking in more general and complicated scenarios.     

TE波辐射下超材料椭圆柱电磁斗篷特性分析

 利用有限元方法分析了TE波辐射下,超材料椭圆柱斗篷的电磁特性。研究发现：当超材料的介电常数、磁导率和电导率偏离理论值0.5%时,斗篷外的电场发生了明显变化;当材料的介电常数、磁导率和电导率为理论值时,不论在斗篷内放置什么特性的材料,也不论斗篷内壁上的边界条件如何,超材料椭圆柱斗篷都具有隐形作用。     

Spatial and temporal thermal analysis of acousto-optic deflectors using finite element analysis model

Thermal effects greatly influence the optical properties of the acousto-optic deflectors (AODs). Thermal analysis plays an important role in modern AOD design. However, the lack of an effective method of analysis limits the prediction in the thermal performance. In this paper, we propose a finite element analysis model to analyze the thermal effects of a TeO₂-based AOD. Both transducer heating and acoustic absorption are considered as thermal sources. The anisotropy of sound propagation is taken into account for determining the acoustic absorption. Based on this model, a transient thermal analysis is employed using ANSYS software. The spatial temperature distributions in the crystal and the temperature changes over time are acquired. The simulation results are validated by experimental results. The effect of heat source and heat convection on temperature distribution is discussed. This numerical model and analytical method of thermal analysis would be helpful in the thermal design and practical applications of AODs.