Hydroaluminierung: Synthese,Struktur und Eigenschaften von 1‐Methyl‐cis‐1‐azonia‐5‐alabicyclo[3.3.0]octan und des Alan‐triallylamin‐Adduktes

Hydro‐Alumination: Synthesis, Structure, and Properties of 1‐Methyl‐ cis ‐1‐azonia‐5‐alabicyclo[3.3.0]octane and of the Alan‐triallylamine Adduct The alan‐N‐methyl‐diallylamine adduct ( I ) was obtained by the reaction of N,N‐diallyl‐methyl‐ammoniumchloride with LiAlH₄. Subsequently the reaction product was transformed by intramolecular hydro‐alumination reaction into bis(1‐methyl‐cis‐1‐azonia‐5‐alabicyclo[3.3.0]octane) ( II ). In contrast to I , the bis(alan‐triallylamine) adduct ( III ) does not undergo an analogous hydro‐alumination reaction. The compounds I , II and III were characterized by MS, IR, ¹H‐, ¹³C‐ and ²⁷Al‐NMR spectroscopy, and the X‐ray structures of II and III are reported and discussed.     

Reaction of 1-bromovinyl and 1-bromo-2-phenylvinyl sulfones with some CH acids

Benzyl, methyl, and phenyl α-bromovinyl sulfones reacted with malononitrile and dimethyl malonate sodium enolates in THF to give sulfonyl-substituted cyclopropanes. Reactions of the same sulfones with methyl acetoacetate sodium enolate afforded the corresponding sulfonyl-substituted cyclopropanes as mixtures of cis and trans isomers with a small impurity of 5-sulfonyl-4,5-dihydrofuran derivative. Phenyl and p-tolyl 1-bromo-2-phenylvinyl sulfones reacted with methyl acetoacetate sodium salt to produce a mixture of trans-isomeric 5-sulfonyl-4,5-dihydrofuran and Michael adduct of the CH acid with activated acetylene generated by concurrent 1,2-dehydrobromination of the initial α-bromovinyl sulfone.     

A convenient synthesis of 1,2-difluoro-1, 2-dideoxyhexoses using xenon fluoride

A method for the addition of fluorine to the double bond in acetylated glycals using XeF₂ in the presence of BF₃ has been shown to provide a convenient route for the synthesis of acetylated 1, 2-dideoxy-1, 2-difluorosugars. The reagent attacks the double bond predominantly from the least hindered side to give a cis adduct, but the reaction also provided other isomers which have been separated by chromatography and their stereo-chemistry determined by ¹⁹F NMR spectroscopy. The proposed mechanism of the reaction involves an initial electrophilic attack by the reagent on C-2 followed by a nucleophilic attack on C-1. Deacetylation of the adducts gave 1, 2-dideoxyl-1, 2-difluorosaccharides, which are of interest in biochemical studies. A crystalline 2-deoxy-2-l-fucose was prepared by selective hydrolysis of the anomeric fluorine atom of 1, 2-dideoxy-1, 2-difluoro-l-fucose.     

Aldol reactions of 2-thioxotetrahydropyrimidin-4(1H)-ones: stereoregulations from endo- and exocyclic chiral centres

The steric regulations imparted by the substituent at N1 in lithium mediated asymmetric aldol reactions of conformationally restricted 3-aryl-1-((S)-1-phenylethyl)-2-thioxotetrahydropyrimidin-4(1H)-ones governed the formation of anti aldol adducts, by a kinetic reaction pathway. The preferential formation of the anti aldol diastereomers was also assisted by the steric effects of the electrophile through diastereofacial selection while the electronic effects of the aryl group at N3 remained subtle. Incorporation of an endocyclic methyl group at C6 witnessed the diastereoselective formation of an anti aldol adduct by regulation of π-facial selectivity. The absolute configurations of the aldol adducts were determined by computational calculations and NMR experiments, and confirmed by single crystal X-ray analysis.     

Tandem transformations of bromo-substituted β-(methylsulfonyl)styrenes in reactions with dimethyl malonate,methyl cyanoacetate,and methyl acetoacetate

β-Bromo-β-(methylsulfonyl)styrene reacted with dimethyl malonate and methyl cyanoacetate in the presence of sodium hydride to give sulfonyl-substituted cyclopropanes, and sulfonyl-substituted 2,3-dihydrofuran was also formed in the reaction with methyl acetoacetate. Reactions of α-bromo-β-(bromomethylsulfonyl) styrene with dimethyl malonate and methyl cyanoacetate led to the formation of 2,3-dihydro-λ⁶-thiophene S,S-dioxide derivatives. In the reaction of α-bromo-β-(bromomethylsulfonyl)styrene with methyl acetoacetate, 2,3-dihydro-λ⁶-thiophene S,S-dioxide and 2,5-dihydro-λ⁶-thiophene S,S-dioxide derivatives and methyl acetoacetate O-alkylation product, methyl 3-[(E)-2-(bromomethylsulfonyl)-1-phenylvinyloxy]but-2-enoate, were obtained at a ratio of 2.7: 1.2: 1. α-Bromo-β-(methylsulfonyl)styrene reacted with dimethyl malonate to produce dimethyl 2-[2-(methylsulfonyl)-1-phenylethylidene]malonate. The reaction of β-bromo-β-(bromomethylsulfonyl) styrene with dimethyl malonate and methyl cyanoacetate were strictly stereoselective, and they afforded tetrahydro-λ⁶-thiophene S,S-dioxide derivatives. The reaction of the same substituted styrene with methyl acetoacetate was not stereoselective, and the products were two diastereoisomeric tetrahydro-λ⁶-thiophene S,S-dioxides and sulfonyl-substituted 2,3-dihydrofuran at a ratio of 2.3: 2.7: 1.     

Formation of the cage-like phosphoranes with the P-C and P-N bonds in the reactions of 2-(2-benzylidenamino)phenoxy-4-tert-butylbenzo-1,3,2-dioxaphosphol with ethyl mesoxalate and ethyl trifluoropyruvate

The reaction of 2-(2-benzylidenamino)phenoxy-4-tert-butylbenzo-1,3,2-dioxaphosphol with ethyl mesoxalate and ethyl trifluoropyruvate resulted in the formation of tricyclic phosphoranes with the P-C and P-N bonds. The adduct emerged from the initial reaction of the P^III derivative with the activated ketone (1: 1), further underwent the transformation via the intramolecular reaction involving the benzylideniminoaryl substituent, which resulted in the formation of the cage-like phosphoranes.     

Highly efficient total synthesis of Δ-PGJ2, 15-deoxy-Δ-PGJ2, and their analogues

Palladium-catalyzed reaction of TBS ether of 4-cyclopentene-1,3-diol monoacetate (>95% ee) with an anion derived from methyl malonate and a base such as t-BuOK and LDA proceeded highly efficiently and reproducibly. The product obtained in >90% isolated yield was transformed in five steps into the key cyclopentenone possessing the α-chain at the γ position. Aldol reaction of this enone with the ω-chain aldehyde afforded the aldol adduct, and exposure of the derived mesylate to Al₂O₃ furnished the cross-conjugated dienone of the full structure. Finally, functional group manipulation furnished Δ¹²-PGJ₂ efficiently. Similarly, 15-deoxy-Δ^12,14-PGJ₂, 5,6-acetylene analogues, and a 5,6-dihydro analogue were synthesized.     

Reaction products of methyl tricyclo[4.1.0.02,7]heptane-1-carboxylate and tricyclo[4.1.0.02,7]hept-1-yl phenyl sulfone with dinitrogen tetraoxide

The reaction of methyl tricyclo[4.1.0.0^2,7]hepatne-1-carboxylate with dinitrogen tetraoxide in diethyl ether at ?10 to 0°C, followed by treatment of the reaction mixture with methanol, gave approximately equal amounts of methyl exo,syn-6,7-dinitro-and exo-6-hydroxy-syn-7-nitrobicyclo[3.1.1]heptane-endo-6-carboxylates. Tricyclo[4.1.0.0^2,7]hept-1-yl phenyl sulfone reacted with dinitrogen tetraoxide under analogous conditions to produce a mixture of diastereoisomeric exo,syn-and endo,syn-6,7-dinitro-6-phenylsulfonylbicyclo-[3.1.1]heptanes and 6,6-dimethoxy-endo-7-nitrobicyclo[3.1.1]heptane at a ratio of 4.5:2:1. Probable factors responsible for the different stereoselectivities in the addition of N₂O₄ at the central C¹-C⁷ bond of the initial tricycloheptane compounds were discussed. The structural parameters of the dinitro ester and related dinitro sulfone were compared on the basis of the X-ray diffraction data.     

Fourier transform ion cyclotron resonance study of ion-molecule reactions of [M – OCH3]+ ions of methyl 2,3,4,6-tetra-O-methyl-d-hexopyranosides with ammonia

Glycosidic oxocarbenium ions A₁⁺ were formed by isobutane chemical ionization from methyl 2,3,4,6-tetra-O-methyl-β-D -mannopyranoside, methyl 2,3,4,6-tetra-0-methyl-β-D -galactopyranoside and methyl 2,3,4,6-tetra-O-methyl-β-D -glucopyranoside (the ring - O-being converted into ? O ? ), and then- reaction with ammonia was studied by Fourier transform ion cyclotron resonance Spectrometry. Very slow formation (reaction efficiency 0.6-1.4%) of the adduct ion [A₁ + NH₃]⁴ was observed as the main process for carefully thermalized ions A₁⁺. Interestingly, the efficiency of the adduct ion formation depends on the sterochemistry of ions A₁⁺.     

ab initio molecular orbital and density functional analysis of acetylene + O2 reactions with CHEMKIN evaluation

A number of researchers have indicated that a direct reaction of acetylene with oxygen needs to be included in detailed reaction mechanisms in order to model observed flame speeds and induction times. Four pathways for the initiation of acetylene oxidation to chain propagation are considered and the rate constants are compared with values used in the mechanisms:

• 1 ³O₂ + HCCH to triplet adduct and reaction on the triplet surface
• 2 ³O₂ + HCCH to triplet adduct, conversion of triplet adduct to singlet adduct via collision in the reaction environment, with further reaction of the singlet adduct
• 3 ¹O₂ + HCCH to singlet adduct
• 4 Isomerization of HCCH to vinylidene and then vinylidene insertion reaction with ³O₂

Elementary reaction pathways for oxidation of acetylene by addition reaction of O₂(³Σ) on the triplet surface are analyzed. ab initio molecular orbital and density functional calculations are employed to estimate the thermodynamic properties of the reactants, transition states, and products in this system. Acetylene oxidation reaction over the triplet surface is initiated by addition of molecular oxygen, O₂(³Σ), to a carbon atom, forming a triplet peroxy‐ethylene biradical. The reaction path to major products, either two formyl radicals or glyoxal radical plus hydrogen atom, involves reaction through three transition states: O₂(³Σ) addition to acetylene (TS1), peroxy radical addition at the ipso‐carbon to form a dioxirane (TS2), and cleavage of O O bond in a three‐member ring (TS3). Single‐point QCISD(T) and B3LYP calculations with large basis sets were performed to try to verify barrier heights on important transition states. A second pathway to product formation is through spin conversion of the triplet peroxy‐ethylene biradical to the singlet by collision with bath gas. Rapid ring closure of the singlet peroxy‐ethylene biradical to form a four‐member ring is followed by breaking of the peroxy bond to form glyoxal, which further dissociates to either two formyl radicals or a glyoxal radical plus hydrogen atom. The overall forward rate constant through this pathway is estimated to be k_f = 2.21 × 10⁷ T^1.46e^{−33.1(kcal/mol)/RT}. Two additional pathways from the literature, HCCH + O₂(¹Δ) and pressure‐dependent isomerization of acetylene to vinylidene and then vinylidene reaction with O₂(³Σ), are also evaluated for completeness. CHEMKIN modeling on each of the four proposed pathways is performed and concentration profiles from these reactions are evaluated at 0.013 atm and 1 atm over 35 milliseconds. Through reaction on the triplet surface is evaluated to be not important. Formation of the triplet adduct with conversion (via collision) to a singlet and the vinylidene paths show similar and lower rates than those used in mechanisms, respectively. Our implementation of the HCCH + O₂(¹Δ) pathway of Benson suggests the need to include: (i) reverse reaction, (ii) barriers to further reaction of the initial adduct plus (iii) further evaluation of the O₂(¹Δ) addition barrier. The pathways from triplet adduct with conversion to singlet and from vinylidene are both recommended for initiation of acetylene oxidation. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 623–641, 2000     

A novel tert-amino effect based approach to 1,2,3,4-tetrahydroquinoline-2-spirocycloalkanes

An interaction of 2-[cyclohexyl(methyl)amino]benzaldehydes with substituted acetonitriles X-CH₂CN (X=CN, Tos, hetaryl) was found to yield 1-methyl-1,2,3,4-tetrahydrospiro(quinoline-2,1′-cyclohexane)-3-carbonitriles. The corresponding spiroquinoline-2,1′-cyclopentane analogues were obtained similarly starting from 2-[cyclopentyl(methyl)amino]benzaldehydes. The reaction was assumed to proceed via initial Knoevenagel condensation and further ring closure of the formed adduct according to the tert-amino effect mechanism. The structure of the prepared compounds was confirmed unambiguously by X-ray crystallographic study.     

Diastereoselective synthesis of (2S)-2-[(R)-1H-indol-3-yl(phenyl)methyl]-2,3-dihydro-1H-inden-1-one

Double asymmetric induction in Michael reactions has been studied. Enantioselective alkylation of a cyclic ketone (1-indanone) with α-phenyl-nor-gramine was carried out. The relative configuration of (2S^∗)-2-[(R^∗)-1H-indol-3-yl(phenyl)methyl]-2,3-dihydro-1H-inden-1-one was established by X-ray diffraction. The relative configuration of (R^∗,R^∗,S^∗)- and (S^∗,R^∗,S^∗)-2-1H-indol-3-yl(phenyl)methyl]-2,3-dihydro-1H-inden-1-ols was established by ¹H NMR studies.     

Synthesis and selected reactions of ethyl 5-(1-chloroethyl)-2-methylfuran-3-carboxylate

Ethyl 2-methylfuran-3-carboxylate is smoothly chloroethylated at 0°C in the 5 position of the ring. The resulting halide alkylates secondary amines but eliminates HCl with sodium diethyl phosphite under the Michaelis-Becker reaction conditions and with trimethyl phosphite under the Arbuzov reaction conditions. In the reaction with sodium diethyl phosphite, small amounts of 5-[1-(diethoxyphosphoryl)ethyl]furan-3-carboxylate and 5-ethylfuran-3-carboxylate are formed. In the Arbuzov reaction at a 1: 1.22 furan: trimethyl phosphite molar ratio, methyl 2,4-dimethyl-1-methoxy-1-oxo-1λ⁵-1,2-dihydrophospheto[3,2-b]furan-5-carboxylate was isolated.     

Additionsreaktionen von 3-Dimethylamino-2,2-dimethyl-2H-azirin an Phenylisocyanat und Diphenylketen

Addition Reaction of 3-Dimethylamino-2,2-dimethyl-2H-azirine with Phenylisocyanate and Diphenylketene 3-Dimethylamino-2,2-dimethyl-2H-azirine ( 1a ) reacts with carbon disulfide and isothiocyanates with splitting of the azirine N(1), C(3)-double bond to give dipolar, fivemembered heterocyclic 1:1 adducts. In some cases, these products can undergo secondary reactions to yield 1:2 and 1:3 adducts. In this paper it is shown that the reaction of 1a with phenylisocyanate also takes place by cleavage of the N(1), C(3)-bond, whereas with diphenylketene N(1), C(2)-splitting is observed. The reaction of 1a and phenylisocyanate in hexane at room temperature yields the 1:3 adduct 2 in addition to the trimeric isocyanate 3 (Scheme 1). A mechanism for the formation of 2 is given in Scheme 5. Hydrolysis experiments with the 1:3 adduct 2 , yielding the hydantoins 4–6 and the ureas 7 and 8 (Schemes 3 and 5), show that the formation of this adduct via the intermediates d , e and f is a reversible reaction. The aminoazirines 1a and 1b undergo an addition reaction with diphenylketene to give the 3-oxazolines 14 (Scheme 8), the structure of which has been established by spectral data and oxidative degradation of 14a to the 3-oxazolin-2-one 15 (R¹ ? R² ? CH₃, Scheme 9).     

The Reaction of Indole with Propiolic Acid

The reaction of indole with propiolic acid ia 1 : 1 mole ratio gave an adduct (I) of 2 : 1 addition with decarboxylation. The reaction of indole with propiolic acid methyl ester gave a 2 : 1 adduct (II). Hydrolysis of adduct II yield the corresponding carboxylic acid (IV). Decarboxylation of IV also gave I. The mechanism of title reaction were fully studied.     

Synthesis and crystal structures of the dioxovanadium complexes [VO2L1] and [VO2L2]2

Two new oxovanadium complexes, [VO₂L¹] (I) and [VO₂L²]₂ (II), where L¹ and L² are the deprotonated forms of 4-bromo-2-[(2-diethylaminoethylimino)methyl]phenol (HL¹) and 4-bromo-2-{[2-(2-hydroxyethylamino)ethylimino]methyl}phenol (HL²), respectively, have been synthesized and characterized by IR spectra and single crystal X-ray diffraction. The crystal of I is monoclinic: space group P2₁/n, a = 14.300(3), b = 7.010(2), c = 15.460(2) ?, ?? = 107.401(2)°, V = 1478.7(5) ?³, Z = 4. The crystal of II is monoclinic: space group P2₁/c, a = 7.270(2), b = 15.373(3), c = 11.893(3) ?, ?? = 99.302(2)°, V = 1311.8(5) ?³, Z = 2. Complex I is a mononuclear dioxovanadium(IV) complex. Complex II is a centrosymmetric dinuclear dioxovanadium(V) complex with a V...V distance of 3.117(2) ?. The Vatom in I is in a distorted square-pyramidal coordination, and that in II is in an octahedral coordination. The difference in the structures of the complexes is largely induced by the hydrogen bonds during the self-assembly process.     

[1+1] and [2+2] crown ethers derived from N,N-bis(2-hydroxyalkylbenzyl)alkylamine and their inclusion phenomena with metal ions

N,N-bis(2-hydroxyalkylbenzyl)alkylamine (HBA) is a derivative obtained from a single time ring opening of benzoxazines. For HBA with methyl group at ortho and para positions, and at N atom, the reaction between this derivative and ditosylated compound gives [1+1] dibenzo-monoaza-crowns. For HBA without methyl group at ortho position, the compound gives [2+2] macrocyclic ethers. The studies on inclusion phenomena using Pedersen’s and molar ratio techniques clarify the alkali metal ion guest inclusion to be 2:1 for [2+2] and 5:2 for [1+1] macrocycles.     

Adducts of rhodium(II) tetraacylates with methionine and its derivatives: 1H and 13C nuclear magnetic resonance spectroscopy and chiral recognition

Complexation of rhodium(II) dimeric tetraacylates: tetraacetate Rh₂AcO₄, tetratrifluoroacetate Rh₂TFA₄ , and (S)-Mosher’s acid salt Rh₂MTPA₄ with both enantiomerically pure and racemic methionine and its derivatives: hydrochloric salt of methionine, hydrochloric salt of methionine methyl ester, N-formyl methionine, N-phthaloyl methionine, N-phthaloyl methyl ester of methionine, and methyl ester of N,N-dimethylmethionine has been investigated by means of ¹H and ¹³C nuclear magnetic resonance (¹H and ¹³C NMR) and absorption electronic spectroscopy in the visible range. Complexation processes were investigated in D₂O or CDCl₃ solutions, depending on the ligands’ and rhodium salts’ solubilities. Some supporting measurements were performed in the solid phase, using ¹³C and ¹⁵N CPMAS NMR techniques.All ligands investigated form 1:1 and 1:2 adducts in the solution, depending on the rhodium salt to ligand molar ratios. The complexation site in the ligands (S atom) was deduced on the basis of the NMR parameter adduct formation shift (Δδ = δ_adduct ? δ_ligand) and calculated chemical shifts (DFT, NMR GIAO). In the cases of the Rh₂TFA₄ and Rh₂MTPA₄ adducts, decreasing the temperature within the range 220–254 K slowed down the ligand exchange and allowed us to observe the signals of all diastereoisomers in the ¹H and ¹³C NMR spectra.     

Reactions of cis-2-Boryl-1-stannylalkenes with Carbodiimides, Thiocyanates, Isothiocyanates, and Isocyanates

The reactions of (E)-2-diethylboryl-1-trimethylstannylbut-1-ene and (Z)-3-diethylboryl-2-trimethylstannylpent-2-ene with carbodiimides, methyl thiocyanate, thioisocyanates, and isocyanates were studied, and the products were characterized by multinuclear magnetic resonance spectroscopy (¹H, ¹¹B, ¹³C and ¹¹⁹Sn NMR). It was found that carbodiimides bearing tert-butyl or trimethylsilyl groups at the nitrogen atoms do not react with (E)-2-boryl-1-stannylalkenes, in contrast to dicyclohexylcarbodiimide. There was also no reaction in the case of MeSCN. All other reactions proceed via a weak NB adduct formation in the initial step, followed by different rearrangements, depending on the structure of reagents as well as on the substitution pattern at the C=C bond in alkenes. New heterocycles are formed, in which the boron atom is either tricoordinated (1,2-azaborolenes, 1,2-azaborolan! es), a nd one ethyl group has been transferred to the neighbor olefinic carbon atom, or the boron atom is tetracoordinated (1,2-azaboratoles, 1,2-oxoniaboratoles), and the trimethylstannyl group has migrated to one of the heteroatoms of the heterocumulenes.     

Novel access to 1-substituted-benzimidazoles via benzotriazole-mediated synthesis

A one-pot good-yielding synthesis of 1-(alcoxymethyl)-1H-benzimidazoles and 1-((1H-benzimidazol-1-yl)methyl)-1H-benzotriazole from N¹,N²-bis((1H-benzotriazol-1-yl)methyl)benzene-1,2-diamine (3) and alcohols is described. The synthesis of 3 from macrocyclic aminal 6H,13H-5:12,7:14-dimethanedibenzo-[d,i][1,3,6,8]tetraazecine (DMDBTA, 1) and benzotriazole is also described. Both these methods are simple, isolation of the products from the reaction mixtures is easy, and the yields are good.