Chemical ionization mass spectrometry—XIX: n-hexane and n-octane as reactants

The suitability of n-hexane and n-octane as reactant gases in chemical ionization mass spectrometry has been investigated. The mass spectra of these substances have been investigated as a function of pressure up to 2·4 Torr for n-hexane and 1·7 Torr for n-octane. The major ion present in n-hexane at 0·8 Torr is [C₆H₁₃]⁺ (m/e 85) with a relative intensity of 0·65. In n-octane at 0·8 Torr the major ions are [C₈H₁₇]⁺ (m/e 113), [C₆H₁₃]⁺ (m/e 85) and [C₅H₁₁]⁺ (m/e 71). The relative intensities of these ions are 0·38, 0·12 and 0·19, respectively. These alkyl ions in both n-hexane and n-octane are thought to have tertiary structures. Rate constants for the rates of reaction of the primary ions in the two compounds have been determined. The n-hexane chemical ionization spectra of 26 compounds were determined. The spectra of polar compounds are dominated by proton transfer, whereas those of nonpolar compounds exhibit proton transfer and in addition often surprisingly large amounts of electron transfer. The n-octane chemical ionization spectra of 15 compounds were determined and the spectra in general are quite similar to those obtained with n-hexane. n-Hexane and n-octane can be used as reagents in analytical chemical ionization mass spectrometry, but except in certain specialized uses they would probably have no advantage over i-butane.     

Study of <Emphasis Type="Italic">n</Emphasis>-hexane isomerization on Pt/SO<Subscript>4</Subscript>/ZrO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts: Effect of the state of platinum on catalytic and adsorption properties

The state of surface Pt atoms in the Pt/SO₄/ZrO₂/Al₂O₃ catalyst and the effect of the state of platinum on its adsorption and catalytic properties in the reaction of n-hexane isomerization were studied. The Pt-X/Al₂O₃ alumina-platinum catalysts modified with various halogens (X = Br, Cl, and F) and their mechanical mixtures with the SO₄/ZrO₂/Al₂O₃ superacid catalyst were used in this study. With the use of IR spectroscopy (CO_ads), oxygen chemisorption, and oxygen-hydrogen titration, it was found that ionic platinum species were present on the reduced form of the catalysts. These species can adsorb to three hydrogen atoms per each surface platinum atom. The specific properties of ionic platinum manifested themselves in the formation of a hydride form of adsorbed hydrogen. It is believed that the catalytic activity and operational stability of the superacid system based on sulfated zirconium dioxide were due to the participation of ionic and metallic platinum in the activation of hydrogen for the reaction of n-hexane isomerization.     

Radiation-cured polyisoprene/C60 fullerene nanocomposite. Part 1: Synthesis in hexane and in toluene

Fullerene C₆₀ can be grafted onto polyisoprene chains by γ irradiation in n-hexane or in toluene. The resulting polyisoprene/C₆₀ nanocomposites can be easily recovered from the solutions and have been characterized by electronic absorption and Fourier transform-infrared (FT-IR) spectroscopy. The electronic absorption spectroscopy clearly shows that C₆₀ undergoes addition reaction from the polyisoprene macroradicals formed by γ radiolysis. FT-IR spectroscopy supports the grafting reaction of polyisoprene on C₆₀ and additionally it shows that C₆₀ acts as a sensitizer for the partial cis–trans isomerization of the polyisoprene monomeric units. Relatively high levels of C₆₀ lead the polyisoprene-based nanocomposite to a crosslinked gel.The thermal behaviour of the polyisoprene/C₆₀ nanocomposites has been studied by the thermogravimetric analysis (TGA-DTG). It is shown that the radical adducts polyisoprene/C₆₀ are thermally reversible and regenerate free C₆₀ during the pyrolysis under N₂.     

“Sock-Ball” Chromatographic Separation of Some Polycyclic Aromatic Hydrocarbons with C60-Fullerene Stationary Phase

Polycyclic aromatic hydrocarbons (PAHs) of different molecular shapes were tested and compared with a prepared C₆₀-fullerene-phase, and with the commercial Amino-phase or RP-18-phase in the mobile phase of methanol/dichloromethane (90/10 — 70/30) or n-hexane/dichloromethane (80/20). The chromatographic separation results indicate that C₆₀-fullerene-phase achieves the special selectivities and performances for the separation of PAHs. Based on the retention mechanism of “π-π” complex interaction or “Sock-Ball” shaped combination, PAHs undergo more pronounced interaction with C₆₀ ligand. For example, decacyclene, a sock-shaped PAH, the structure of which was calculated by means of semi-empirical molecular orbital methods, possesses stronger retention to give a “Sock-Ball” chromatographic separation with C₆₀-fullerene-phase. However, PAHs with bend, planar, or co-planar structures eluted on C₆₀-fullerene-phase undergo adsorption chromatography, but possess weaker retentions. The retention power of “Sock-Ball” chromatography can successfully recognize the different molecular shapes of PAHs.     

Selectivite de la reduction de l'androsten-4 dione-3,17 et de la progesterone par divers borohydrures: role de l'assistance electrophile par le cation ou un solvant hydroxyle

The reduction of Δ⁴-androsten-3, 17 dione 1 and of progesterone 2 by nBu₄NBH₄ is highly chemioselective: in THF only the a-enone moiety is reduced, the saturated C₁₇ or C₂₀ keto group being kept unchanged. When TMEDA is added, saturated alcohols are obtained, without any allylic alcohol when the reaction goes to completion. However this reduction is poorly stereoselective as 70:30 mixtures of A/B cis and trans ring junction compounds are obtained. In MeOH, the saturated keto group is more than 90% selectively reduced. However, the reduction of 1 and 2 by LiBH₄ and Zn(BH₄)₂ is poorly chemioselective. These results are interpreted in terms of competition between electrophilic assistance and steric effects.     

Inhibition and anti-inhibition effects of electron scavengers in hydrocarbons revisited

Positronium formation experiments inn-hexane were performed with C₂H₅Br and CCl₄ as inhibitors and others (decalin, tetralin, benzene, naphthalene, phenanthrene) as anti-inhibitors. Although the results can be interpreted in terms of the anti-recombination and anti-inhibition, it is necessary to consider further some new aspects of intra-spur reactions such as shallow tapping of e⁺ and secondary reactions of Ps. The data thus interpreted correlate excellently with the data of radiation chemistry.     

High performance liquid chromatography on the chiral stationary phase (R,R)-DACH-DNB using carbon dioxide-based eluents

Fast and efficient separations of chiral stereolabile compounds were obtained at very low temperature on a π-acid chiral stationary phase (R,R-DACH-DNB) using carbon dioxide-based mobile phases containing alcoholic polar modifiers. Furthermore, efficient separations of the newly discovered spherical carbon cluster buckminsterfullerene (C₆₀) and the related higher fullerenes (C₇₀, etc.) have been performed on the same stationary phase using eluents based on either n-hexane or carbon dioxide.     

Catalytic Performance of Re/Ga2O3/WO3/ZrO2 Catalyst for n-Hexane Isomerization

A series of Re/Ga₂O₃/WO₃/ZrO₂ catalysts were prepared by the impregnation method. The crystalline structure, redox, and acid site distribution of the catalysts were characterized by X-ray powder diffraction, temperature-programmed reduction of H₂, and temperature-programmed desorption of NH₃. Their catalytic performance for n-hexane isomerization was studied. The results showed that the addition of Re greatly affected the redox properties and the acid site distribution of the catalysts. Owing to the presence of Re, n-hexane isomerization was catalyzed by metal and acid sites, and thus the conversion of n-hexane and the selectivity for 2,2-dimethylbutane were significantly increased. Under the conditions of 195 °C, 1.0 MPa, LHSV = 1.0 h⁻¹, and n(H₂)/n(C₆) = 2.0, the conversion of n-hexane over 1.0%Re/1.0%Ga₂O₃/WO₃/ZrO₂ is 84.8%, and the selectivities for 2,2-dimethylbutane, i-hexane, and cracking products (C_5-) are 20%, 97.7%, and 2.1%, respectively. The catalyst is stable during 150 h operation.     

Extraction of fullerene mixture from fullerene soot with organic solvents

Investigation of extraction of fullerene mixture from the fullerene soot obtained by plasma erosion of graphite rod in helium atmosphere with different solvents such as α-chloronaphthalene, o-dichlorobenzene, o-xylene, toluene, benzene, carbon tetrachloride, and n-hexane at 25°C was carried out. Completeness and effectiveness of extraction as well as relative content of light (C₆₀, C₇₀) and heavy (C₇₆, C₇₈, C₈₄) fullerenes in the extract were evaluated.     

CPMD/GULP QM/MM interface for modeling periodic solids: Implementation and its application in the study of Y‐zeolite supported Rhn clusters

We report here the development of hybrid quantum mechanics/molecular mechanics (QM/MM) interface between the plane‐wave density functional theory based CPMD code and the empirical force‐field based GULP code for modeling periodic solids and surfaces. The hybrid QM/MM interface is based on the electrostatic coupling between QM and MM regions. The interface is designed for carrying out full relaxation of all the QM and MM atoms during geometry optimizations and molecular dynamics simulations, including the boundary atoms. Both Born–Oppenheimer and Car–Parrinello molecular dynamics schemes are enabled for the QM part during the QM/MM calculations. This interface has the advantage of parallelization of both the programs such that the QM and MM force evaluations can be carried out in parallel to model large systems. The interface program is first validated for total energy conservation and parallel scaling performance is benchmarked. Oxygen vacancy in α‐cristobalite is then studied in detail and the results are compared with a fully QM calculation and experimental data. Subsequently, we use our implementation to investigate the structure of rhodium cluster (Rh_n; n = 2 to 6) formed from Rh(C₂H₄)₂ complex adsorbed within a cavity of Y‐zeolite in a reducible atmosphere of H₂ gas. © 2016 Wiley Periodicals, Inc.     

Self-assembling of fullerene C<Subscript>60</Subscript> into (C<Subscript>60</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> clasters in aromatic solvents

Self-assembling of fullerene C₆₀ into (C₆₀) _n clusters in aromatic solvents was studied. The role of the π-π interactions and dispersion forces in the (C₆₀) _n cluster formation in these media is demonstrated using the data on the solubility of fullerene C₆₀ in these solvents and their ionization potentials and also spectral characteristics of fullerene C₆₀ in the range of 326–340 nm in different solvents.     

Low temperature radiolysis of fullerene C<Subscript>60</Subscript> and its solutions in isopropylbenzene and <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

Low-temperature (77 K) radiolysis of solid fullerene C₆₀ and its glassy solutions in isopropylbenzene (IPB) and N-vinylpyrrolidone (N-VP) has been investigated with the use of ESR spectroscopy. Radiationchemical yields for the formation of paramagnetic centers (G _PMC, 1/100 eV) have been determined to be ∼0.001 for pure fullerene and 0.3 and 0.7 for its solutions in IPB and N-VP, respectively. The low value of G _PMC for fullerene indicates a high stability of this form of carbon. The increase in G _PMC in solutions as compared to the pure solvents (0.15 for IPB and 0.3 for N-VP) indicates the sensitizing effect of C₆₀.     

La luminescence différée du styrène en solution vitreuse dans le méthylcyclohexane

The trapping of electrons and styrene cations and anions has been studied in a methylcyclohexane glass by the techniques of deferred luminescence. Radiothermoluminescence curves consist of two peaks, at 90 and 95°K, in this matrix. The second peak increases linearly with styrene concentration up to 2 × 10^?2M when it reaches a constant value, whereas the first peak increases from 10^?4 to 10^?3M and then decreases at higher concentrations and is not discernible at concentrations above 10^?2M. We propose two mechanisms which are qualitatively consistent with this behavior and are based essentially on the recombination of styrene cations with thermally detrapped electrons in the first peak and with anions in the second peak. Photothermoluminescence (i.e., thermoluminescence after photoionization with ultraviolet light) similarly consists of the 90 and 95°K peaks for a 10^?3M solution and of the 95° peak alone for a 10^?d M solution. Radiophotoluminescence excitation spectra at 77°K, corresponding to absorption spectra of trapped electrons and styrene anions, show that anions are the predominant negative species in 10^?2 molar solution, and trapped electrons in 10^?3 molar solution. Spectral analysis of radiothermoluminescenece shows the presence of two emission bands, one of which is identical with styrene fluorescence excited by the 254 Nm mercury line (λ_max = 292, 302, 307, and 317 Nm). The other band has three fairly poorly resolved maxima at 474, 486 and 496 nm and seems to correspond to the fluorescence of C₆H₅?H-CH₃ radicals formed during radiolysis.     

Solution ozonolysis of C<Subscript>70</Subscript>: stable products and chemiluminescence

For the first time the total and relative contents of the stable ozonolysis products of fullerene C₇₀ solutions were identified by IR spectroscopy and elemental and chemical analyses. At the 100% conversion of C₇₀ a mixture of products corresponding to the empirical formula C₇₀O_14.3H_0.21 (epoxides: polyketones: polyesters: secondary fullerene ozonides (SFOZ): acids = 1.07: 6: 6: 0.21: 1.02) is formed. The content of polyketones, polyesters, acids, and SFOZ increases during the whole ozonolysis time (1 h). The number of oxygen atoms in epoxides C₇₀O _n (n = 1–4) is lower than that in epoxides C₆₀O _n (n = 1–6) formed by the ozonolysis of fullerene C₆₀. The kinetic curve of accumulation of epoxides C₇₀O _n (n = 1–4) passes through a maximum, which is observed 0.5 min after the beginning of ozonolysis. No epoxides were identified among the products 3.5 min after the ozonolysis. The photoluminescence (PL) (λ_max = 645 and 685 nm) of fullerene polyketones in glassy EtO₂/EtOH solutions frozen at 77 K was observed. This PL is much brighter, than that of polyketones formed upon the ozonolysis of fullerenes C₆₀. For the first time the chemiluminescence (CL) was detected and studied upon the ozonolysis of C₇₀ solutions at 300 K. The CL emitters are excited states of fullerene polyketones. The CL spectrum is partially overlapped with the known CL spectrum appeared upon the ozonolysis of C₆₀ (λ_max = 685 nm) but contains the greater number of maxima (λ_max = 645 and 685 nm), which is related to a lower symmetry of the C₇₀ oxidation products.     

Étude des Phénomènes de Redistribution dans les Systèmes BR3/BT3 avec T = –OCH3, –SCH3, –N(CH3)2

Proton and ¹¹B magnetic resonance studies of the redistribution in the system BR₃/BT₃ (R = C₃H₇, T = OCH₃, SCH₃ and N(CH₃)₂) show that equilibria between different species BR_nT_3–n (n = 0, 1, 2, 3) occur. In general it appears that the mixed species (n = 1 and 2) are more favoured than would be the case for completely random scrambling; however, consideration of steric and electronic factors may explain this phenomenon.     

Thermodynamique des mélanges liquides binaires. Chaleurs de mélange des cycloalcanes

Heats of mixing were measured between 10° and 80°C for all binary systems formed with cycloalcanes C_nH_2n, n = 5, 6, 7, 8.     

Reduction reactions of the metallocene complex (η-C5H4CMe2C9H7)2ZrCl2

The preparation and characterization of the substituted bis(cyclopentadienyl) zirconium dichloride complexes (η⁵-C₅H₄CMe₂C₉H₇)₂ZrCl₂ (1a, b) is reported. The isomer mixture of 1a, b was treated with different reducing agents such as sodium and n-butyllithium under various reaction conditions. In these reactions CC and CH activation and cleavage reactions were observed. In combination with methylaluminoxane (MAO) 1a, b and 3 showed low activities as homogeneous ethylene polymerization catalysts and no activities towards propylene. Compounds 2 and 3 were characterized by NMR spectroscopy and X-ray crystallography.     

Design,synthesis, and optical/electronic properties of a series of sphere-rod shape amphiphiles based on the C<Subscript>60</Subscript>-oligofluorene conjugates

A series of sphere-rod shape amphiphiles were designed and synthesized by connecting the rod-like oligofluorenes with different lengths (OF _n ) to the different positions of the spherical [60]fullerene (C₆₀) through a rigid linkage. The conjugates were characterized by ¹H-NMR, ¹³C-NMR, FTIR, EA and MALDI-TOF mass spectrometry. The optical and electronic properties of the conjugates were studied by UV-Vis absorption spectroscopy, fluorescence spectrometry, and cyclic voltammetry. The results from UV-Vis absorption spectroscopy and cyclic voltammetry indicated that the energy profiles of C₆₀ and OF _n remained unchanged when different lengths of OF _n were attached to C₆₀. The electron affinities of the OF _n -C₆₀ conjugates were close to that of C₆₀, while slight electronic interaction was found between the two individual chromophores (C₆₀ and OF _n ) in their ground states. The fluorescence spectra exhibited a complete fluorescence quenching in the toluene solution, suggesting an effective energy transfer from OF _n to C₆₀. It presents a systematic study on the self-assembly, structure-property relationship, and potential technical applications of the conjugates.     

Optically pure fullerodendron formed by diastereoselective Diels-Alder reaction

The Diels-Alder reaction between C₆₀ and anthryl glycodendron, which has d- or l-gluconamides at the terminals, gave a new fullerene glycodendron conjugate. Interestingly, the diastereoselective cycloaddition reaction proceeded upon the treatment of C₆₀ with the anthryl dendron 3. Furthermore, optical pure fullerodendrons (−)-4L and (+)-4D, which were confirmed by ¹H and ¹³C NMR spectroscopy, FT-IR, MALDI-TOF mass spectroscopic analysis, were isolated from the mixture of diastereomers. And their absolute configurations were predicted by the use of CD spectra.     

Crystal Structures and Phase‐Transition Dynamics of Cobaltocenium Salts with Bis(perfluoroalkylsulfonyl)amide Anions: Remarkable Odd–Even Effect of the Fluorocarbon Chains in the Anion

Crystal structures and thermal properties of cobaltocenium salts with bis(perfluoroalkylsulfonyl)amide (C_nF_2n+1SO₂)₂N anions [n=0 ( 1 ), 1 ( 1 a ), 2 ( 1 b ), 3 ( 1 c ), and 4 ( 1 d )] and the 1,1,2,2,3,3‐hexafluoropropane‐1,3‐disulfonylamide anion ( 2 ) were investigated. In these solids, the cations are surrounded by four anions around their C₅ axis, and stacking of these local structures forms two kinds of assembled structures. In the salts with even n ( 1 , 1 b , and 1 d ), the cation and anion are arranged alternately to form mixed‐stack columns in the crystal. In contrast, in the salts with odd n ( 1 a and 1 c ), the cations and anions independently form segregated‐stack columns. An odd–even effect was also observed in the sum of the phase‐change entropies from crystal to melt. All of the salts exhibited phase transitions in the solid state. The phase transitions to the lowest‐temperature phase in 1 , 1 a , and 2 are accompanied by order–disorder of the anions and symmetry lowering of the space group, which results in the formation of an ion pair. Solid‐state ¹³C NMR measurements on 1 a and 1 b revealed enhanced molecular motions of the cation in the higher‐temperature phases.