Recent developments and applications of microextraction techniques in drug analysis

Sample preparation is important for isolating desired components from complex matrices and greatly influences their reliable and accurate analysis. Recent trends in sample preparation include miniaturization, automation, high-throughput performance, online coupling with analytical instruments, and low-cost operation through extremely low or no solvent consumption. Microextraction techniques, such as liquid-phase microextraction and solid-phase microextraction, have these advantages over the traditional approaches of liquid–liquid extraction and conventional solid-phase extraction. This review focuses primarily on these microextraction techniques developed over the last decade, and presents a summary of the characteristics of various approaches in drug analysis.     

Recent developments in microextraction techniques based on crown ethers

Sample preparation is essential for isolating desired components from complex matrices and greatly influences their reliable and accurate analysis. Microextraction techniques such as solid phase micro extraction and liquid–liquid–liquid micro extraction based on hollow fiber and also single drop micro extraction methods are new and effective sample preparation techniques. Crown ethers are heterocyclic chemical compounds that consist of a ring containing several ether groups. Recently crown ethers have been applied in these methods and increase efficiency and selectivity of these techniques. Here we review the application of crown ethers in various micro extraction techniques.     

Recent developments in solid-phase microextraction coatings and related techniques

During the last decade, solid-phase microextraction (SPME) has gained widespread acceptance for analyte matrix separation and preconcentration. Relatively few data are currently available dealing with in-house production of fibres with tailor-made properties to be used for SPME, though recently the number of publications evaluating new coatings has been considerably growing. This review, centred on publications that appeared during the last five years, is resuming different approaches which can be used for fibre production and further summarises alternative techniques closely related to SPME, such as in-tube extraction or single-drop microextraction (SDME). The aim is to give the reader a concise overview of recent developments in new coating procedures and materials, including the respective applications.     

A critical review of vacuum-assisted headspace solid-phase microextraction for environmental analysis

Vacuum-assisted headspace solid-phase microextraction (Vac-HSSPME) is an emerging analytical technique, which further advances HSSPME by providing lower detection limits of analytes with poor volatility at shorter extraction times. This review discusses the theoretical aspects and possibilities of the Vac-HSSPME technique for analysis of environmental samples. Optimization of key parameters, currently available equipment and methods for quantification of organic pollutants in water and soil are considered. Key problems and limitations of the technique are discussed along with possible approaches for its future development. The technique has a well-developed theory, which could be used for modeling of the extraction process, faster method development, and optimization. Wider application of the technique is limited by the lack of automation, which, however, seems possible to develop and implement by manufacturers of commercial multi-purpose autosamplers for gas chromatography instruments. It has been shown that Vac-HSSPME allows decreasing cross-contamination of samples from the laboratory air, which is advantageous for identification and quantification of trace environmental pollutants. Simple equipment for the technique makes it possible to apply for on-site sample preparation and analysis of environmental samples.     

微萃取技术在环境分析中的应用

微萃取技术是近年来出现的绿色样品前处理技术。它具有操作简便、环境友好等优点,并且在环境、医药及食品等领域得到广泛的应用。本文仅就固相微萃取和液相微萃取在环境分析中的应用作一简要综述。     

Recent developments in solid-phase microextraction

The main objective of this review is to describe the recent developments in solid-phase microextraction technology in food, environmental and bioanalytical chemistry applications. We briefly introduce the historical perspective on the very early work associated with the development of theoretical principles of SPME, but particular emphasis is placed on the more recent developments in the area of automation, high-throughput analysis, SPME method optimization approaches and construction of new SPME devices and their applications. The area of SPME automation for both GC and LC applications is particularly addressed in this review, as the most recent developments in this field have allowed the use of this technology for high-throughput applications. The development of new autosamplers with SPME compatibility and new-generation metal fibre assemblies has enhanced sample throughput for SPME-GC applications, the latter being attributed to the possibility of using the same fibre for several hundred extraction/injection cycles. For LC applications, high-throughput analysis (>1,000 samples per day) can be achieved for the first time with a multi-SPME autosampler which uses multi-well plate technology and allows SPME sample preparation of up to 96 samples in parallel. The development and evolution of new SPME devices such as needle trap, thin-film microextraction and cold-fibre headspace SPME have offered significant improvements in performance characteristics compared with the conventional fibre-SPME arrangement. Figure Photo of a high-throughput multi-fibre SPME PAS autosampler     

固相微萃取研究进展

<正>固相微萃取(solid-phase microextraction,SPME)是20世纪80年代末发展起来的一种新型样品前处理方法,最先由Waterloo大学的Pawliszyn等提出。固相微萃取技术的发展主要体现在新型涂层材料的出现及其在环境、食品、生物等领域应用的不断深入两个方面。     

分散液相微萃取技术研究的最新进展

分散液相微萃取(DLLME)作为一种新型样品前处理技术,具有操作简便、快速,富集效率高,萃取剂使用量少等优点。本文对近年来该技术在分离科学领域应用的最新进展进行了简要评述。主要讨论了以下3个方面:(1)DLLME与其他净化或萃取技术的结合;(2)萃取剂的拓展;(3)萃取装置的改进。     

Recent developments in the application of thermal analysis techniques in fossil fuels

In this review, application of thermal analysis techniques (differential scanning calorimetry, thermogravimetry, differential thermal analysis, etc.) for fossil fuel characterization and kinetics are reviewed between 2001 and 2006. The results presented clearly showed that thermal analysis applications are well-established techniques used in fossil fuel research area.     

Recent developments and applications of liquid phase microextraction in fruits and vegetables analysis

The sample preparation step has been identified as the bottleneck of analytical methodology in chemical analysis. Therefore, there is need for the development of cost‐effective, easy to operate, and environmentally friendly miniaturized sample preparation technique. The microextraction techniques combine extraction, isolation, concentration, and introduction of analytes into analytical instrument, to a single and uninterrupted step, and improve sample throughput. The use of liquid‐phase microextraction techniques for the analysis of pesticide residues in fruits and vegetables are discussed with the focus on the methodologies employed by different researchers and their analytical performances. Analytes are extracted using water‐immiscible solvents and are desorbed into gas chromatography, liquid chromatography, or capillary electrophoresis for identification and quantitation.     

Recent developments in radioanaytical technologies for environmental investigations

Radiometric techniques, specifically underground gamma-ray spectrometry, have been recently widely applied in the analysis of short and medium-lived radionuclides in the environment. Long-lived radionuclides have been mostly analysed by Accelerator Mass Spectrometry and Inductively Coupled Plasma Mass Spectrometry. These developments have considerably improved the detection limits for analysis of radionuclides in the terrestrial and marine environments. They have also decreased required sample volumes so applications, which have not been possible before either because of sample size or required sensitivity, have become feasible. The recent developments are illustrated by applications of radiometric and mass spectrometry techniques in isotope hydrology and oceanography.     

Analysis of volatile contaminants in vegetable oils by headspace solid-phase microextraction with carboxen-based fibres

The headspace solid-phase microextraction (HS-SPME) efficiencies from vegetable oil of the recently available Carboxen-poly(dimethylsiloxane) (PDMS) and divinylbenzene-Carboxen-PDMS fibres were found to be much greater than those of the PDMS fibre for a number of volatile contaminants. Using these Carboxen-based fibres, the commonly used HS-SPME equilibration times for aqueous matrices of 30-45 min at room temperature for a number of halogenated and aromatic analytes with volatilities ranging from 1,1-dichloroethylene to hexachlorobenzene were found to be insufficient for the effective extraction of the less volatile analytes from vegetable oil. HS-SPME at 100 degrees C for 45 min, followed by rapid cooling to 0 degrees C with a 10 min continuing extraction, however, significantly increased the SPME efficiencies for the less volatile analytes. Spiking solutions were prepared in vegetable oil instead of methanol as the latter was found to displace analytes from the Carboxen material. Using either of the Carboxen-based fibres and SPME at 100 degrees C, all the target analytes could be determined at low or sub-microg kg(-1) with repeatability < or =10%, even though an equilibrium SPME of the less volatile analytes was not achieved.     

Certified reference materials for inorganic and organic contaminants in environmental matrices

Chemical measurements often constitute the basis for informed decision-making at different levels in society; sound decision-making is possible only if the quality of the data used is uncompromised. To guarantee the reliability and comparability of analytical data an intricate system of quality-assurance measures has to be put into effect in a laboratory. Reference materials and, in particular, certified reference materials (CRMs) are essential for achieving traceability and comparability of measurement results between laboratories and over time. As in any other domain of analytical chemistry, techniques used to monitor the levels and fate of contaminants in the environment must be calibrated using appropriate calibration materials, and the methods must be properly validated using fit-for-purpose matrix-matched CRMs, to ensure confidence in the data produced. A sufficiently large number of matrix CRMs are available for analysis of most elements, and the group of chemicals known as persistent organic pollutants, in environmental compartments and biota. The wide variety of analyte/level/matrix/matrix property combinations available from several suppliers enables analysts to select CRMs which sufficiently match the properties of the samples they analyse routinely. Materials value-assigned for the so-called emerging pollutants are scarce at the moment, though an objective of current development programmes of CRM suppliers is to overcome this problem.     

Recent developments in solid-phase microextraction for on-site sampling and sample preparation

On-site sampling and sample preparation favor portable, solventless or even solvent-free techniques. Solid-phase microextraction (SPME) has these advantages. This review focuses on developments between 2007 and early 2011 in microextraction techniques for on-site sampling and sample preparation, including fiber SPME, stir-bar sorptive extraction (SBSE), thin-film microextraction (TFME) and different types of in-needle SPME. The major trends in on-site applications of SPME appear to be fiber and thin-film SPME, microextraction by packed sorbent (MEPS) and the sorbent-packed needle-trap device (NTD). We discuss and compare several aspects of these types of SPME in on-site applications. We also describe sorbent phases for SPME that benefit on-site applications. Finally, we provide a perspective on SPME-based techniques for on-site applications.     

Recent developments in sample preparation techniques for chromatography analysis of traditional Chinese medicines

Traditional Chinese medicines (TCMs) have a long history dating back thousands of years. Recently, there has been increasing interest worldwide in the use of TCMs for the prevention and treatment of various illnesses. In China, a large number of analytical tools, especially chromatographic techniques have been used to analyze the constituents of TCMs in order to control their quality and discover new bioactive compounds. In this paper, recent developments in sample preparation techniques for the extraction, clean-up, and concentration of analytes from TCMs are compared. These techniques include headspace solid-phase microextraction (HS-SPME), headspace liquid-phase microextraction (HS-LPME), microwave-assisted extraction (MAE), supercritical-fluid extraction (SFE), pressurized-liquid extraction (PLE), and microwave distillation (MD).     

The use of headspace solid phase microextraction for the characterization of volatile compounds in olive oil matrices

Two different fibre coatings, for solid phase microextraction (SPME) sampling, poly(dimethylsiloxane) (PDMS) and poly(acrylate) (PA), were studied in order to test, for olive oil matrixes, two mathematical models that relate the directly proportional relationship between the amount of analyte absorbed by a SPME fibre and its initial concentration in the sample matrices. Although the PA fibre was able to absorb higher amounts of compounds from the olive oil sample, the equilibrium was reached later then with the PDMS fibre. In both cases, the amount of analyte present affected the time profile or the equilibrium time in two of the concentrations studied, 0.256 μL/kg, 2.56 μL/kg and for 2-ethylfuran, pentan-3-one, pent-1-en-3-one, hexanal, trans,trans-non-2,4-dienal and in the four concentrations studied, 0.256 μL/kg, 2.56 μL/kg, 6.25 μL/kg and 400 μL/kg, for 4-methyl-pent-3-en-2-one, 2-methylbutan-1-ol, methoxybenzene, hexan-1-ol, cis-hex-3-en-1-ol, trans-hex-2-en-1-ol, 2-ethyl-hexan-1-ol and trans,trans-dec-2,4-dienal. Comparing the mathematical models of both fibres, the PA-coated fibre showed direct proportionality between the initial concentration and amount extracted, that allows the possibility of relative quantification in a non-equilibrium state in non-aqueous media. The same was not observed for the PDMS fibre.     

Use of different sample temperatures in a single extraction procedure for the screening of the aroma profile of plant matrices by headspace solid-phase microextraction

This study proposes a new approach to the optimization of the extraction of the volatile fraction of plant matrices using the headspace solid-phase microextraction (HS-SPME) technique. The optimization focused on the extraction time and temperature using a CAR/DVB/PDMS 50/30 μm SPME fiber and 100mg of a mixture of plants as the sample in a 15-mL vial. The extraction time (10-60 min) and temperature (5-60 °C) were optimized by means of a central composite design. The chromatogram was divided into four groups of peaks based on the elution temperature to provide a better understanding of the influence of the extraction parameters on the extraction efficiency considering compounds with different volatilities/polarities. In view of the different optimum extraction time and temperature conditions obtained for each group, a new approach based on the use of two extraction temperatures in the same procedure is proposed. The optimum conditions were achieved by extracting for 30 min with a sample temperature of 60 °C followed by a further 15 min at 5 °C. The proposed method was compared with the optimized conventional method based on a single extraction temperature (45 min of extraction at 50 °C) by submitting five samples to both procedures. The proposed method led to better results in all cases, considering as the response both peak area and the number of identified peaks. The newly proposed optimization approach provided an excellent alternative procedure to extract analytes with quite different volatilities in the same procedure.     

Optimisation of headspace solid-phase microextraction for the analysis of volatile phenols in wine

Headspace solid-phase microextraction has been applied to the analysis of volatile phenols in wine. Silica fibre coated with Carbowax-divinylbenzene was found to be more efficient at extracting these compounds than other fibres such as those coated with polydimethylsiloxane, polyacrylate, carboxen-polydimethylsiloxane, and polydimethylsiloxane-divinylbenzene. Different parameters such as extraction time, temperature of the sample during the extraction, ionic strength and sample volume were optimised using a two-level factorial design expanded further to a central composite design, in order to evaluate several possibly influential and/or interacting factors. The headspace (HS)-SPME procedure developed shows adequate detection and quantitation limits, and linear ranges for correctly analysing these compounds in wine. The recoveries obtained were close to 100%, with repeatability values lower than 16%. The method was applied to a variety of white and red wines.     

固相萃取技术在食品痕量残留和污染分析中的应用

食品痕量残留和污染分析中,样品的前处理极为重要,也是其难点所在。由于食品和农产品样品的多样性和复杂性,目前还没有一种前处理技术能够适合所有情况下的所有样品。本文对近年来发展起来的新型固相萃取技术如固相微萃取、搅拌棒吸附萃取、基质固相分散萃取、分子印迹固相萃取、免疫亲和固相萃取、整体柱固相萃取、碳纳米管固相萃取等在食品痕量残留和污染分析中的应用进行了综述,对未来的发展前景作了展望。     

Analysis of organic compounds in environmental samples by headspace solid phase microextraction

The analysis of samples contaminated by organic compounds is an important aspect of environmental monitoring. Because of the complex nature of these samples, isolating target organic compounds from their matrices is a major challenge. A new isolation technique, solid phase microextraction, or SPME, has recently been developed in our laboratory. This technique combines the extraction and concentration processes into one step; a fused silica fiber coated with a polymer is used to extract analytes and transfer them into a GC injector for thermal desorption and analysis. It is simple, rapid, inexpensive, completely solvent-free, and easily automated. To minimize matrix interferences in environmental samples, SPME can be used to extract analytes from the headspace above the sample. The combination of headspace sampling with SPME separates volatile and semi-volatile analytes from non-volatile compounds, thus greatly reducing the interferences from non-target compounds. This paper reports the use of headspace SPME to isolate volatile organic compounds from various matrices such as water, sand, clay, and sludge. By use of the technique, benzene, toluene, ethyl-benzene, and xylene isomers (commonly known as BTEX), and volatile chlorinated compounds can be efficiently isolated from various matrices with good precision and low limits of detection. This study has found that the sensitivity of the method can be greatly improved by the addition of salt to water samples, water to soil samples, or by heating. Headspace SPME can also be used to sample semi-volatile compounds, such as PAHs, from complex matrices.